Inhibition effect of environmentally benign Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution

The inhibition of the corrosion of mild steel in hydrochloric acid solution by the seed extract of Karanj (Pongamia pinnata) has been studied using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization, and linear polarization techniques. Inhibition was found to increase with increasing concentration of the extract. The effect of temperature, immersion time, and acid concentration on the corrosion behavior of mild steel in 1 M HCl with addition of extract was also studied. The adsorption of the extract on the mild steel surface obeyed the Langmuir adsorption isotherm. Values of inhibition efficiency calculated from weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy are in good agreement. Polarization curves showed that Karanj (P. pinnata) seed extract behaves as a mixed-type inhibitor in hydrochloric acid. The activation energy as well as other thermodynamic parameters for the inhibition process was calculated. The adsorbed film on mild steel surface containing Karanj (P. pinnata) seed extract inhibitor was also measured by Fourier transform infrared spectroscopy. The results obtained showed that the seed extract of Karanj (P. pinnata) could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric acid media.     

Green approach to corrosion inhibition of mild steel in hydrochloric acid medium using extract of spirogyra algae

In the present investigation, a fresh water green algae spirogyra is used as an inexpensive and efficient mild steel corrosion inhibitor. The study is carried out in 0.5?M HCl solution using weight loss measurements, scanning electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transforms infrared (FT-IR) techniques. The maximum inhibition efficiency was found to be 93.03% at 2?g?L^?1. The adsorption of extract of spirogyra on mild steel surface obeys the Langmuir adsorption isotherm. Corrosion inhibition mechanisms were inferred from the temperature dependence of the inhibition efficiency as well as from calculation of thermodynamic and kinetic parameters which direct the process. FT-IR analysis of green algae spirogyra revealed the presence of hydroxyl, amino, and carbonyl groups, which are responsible for the adsorption on the mild steel surface. SEM analysis supported the inhibitive action of the spirogyra extract against the mild steel corrosion in acid solution.     

Corrosion inhibition of mild steel in hydrochloric acid by betanin as a green inhibitor

The effect of betanin (2,6-pyridinedicarboxylic acid, 4-(2-(2-carboxy-5-(beta-D-glucopyr-anosyloxy)-2,3-dihydro-6-hydroxy-1H-indol-1-yl)ethenyl)-2,3-dihydro-(S-(R*,R*))) on the corrosion inhibition of mild steel has been investigated in 1 M HCl solution. Weight loss method, potentiodynamic polarization, and electrochemical impedance spectroscopy techniques were applied to study the mild steel corrosion behavior in the absence and presence of different concentrations of betanin under the influence of various experimental conditions. The results obtained showed that betanin is a good “green” inhibitor for mild steel in 1 M HCl solution. Scanning electron microscopy observations of the steel surface confirmed the protective role of the inhibitor. The polarization curves showed that betanin behaves mainly as a mixed-type inhibitor. Maximum inhibition efficiency (98%) is obtained at betanin concentrations of 0.01 M. The results obtained from weight loss, polarization, and impedance measurements are in good agreement.     

Study on the Inhibition of Mild Steel Corrosion by Cationic Gemini Surfactant in 1 M HCl

The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using ¹H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen.     

Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Inhibitive,adsorption and synergistic studies on ethanol extract of Gnetum Africana as green corrosion inhibitor for mild steel in H2SO4

Abstract

The inhibitive and adsorptive characteristics of ethanol extract of Gnetum Africana for the corrosion of mild steel in H₂SO₄ solutions have been studied using weight loss, gasometric, thermometric, and IR methods of monitoring corrosion. Ethanol extract of Gnetum Africana is a good adsorption inhibitor for the corrosion of mild steel in H₂SO₄. The inhibitive property of the extract is attributed to the presence of alkaloid, saponin, tannin, terpene, anthraquinone, cardiac glycoside, and alkaloid in the extract. The adsorption of the inhibitor on mild steel surface is exothermic, spontaneous and is consistent with the mechanism of physical adsorption. In addition, Langmuir and Temkin adsorption isotherms best described the adsorption characteristics of the inhibitor. Efforts to improve the adsorption of the inhibitor through synergistic combinations with halides indicated that only KCl may enhance the efficiency of the inhibitor. The study provides information on the use of ethanol extract of Gnetum Africana as a corrosion inhibitor for mild steel.     

Inhibitive effect by extract of Mentha rotundifolia leaves on the corrosion of steel in 1 M HCl solution

An extract of Mentha rotundifolia leaves (EMRL) was tested as a corrosion inhibitor of steel in 1 M HCl using electrochemical impedance spectroscopy, Tafel polarization methods, and weight loss measurements. The inhibition efficiency of the extract of Mentha rotundifolia leaves was calculated and compared. We note good agreement between these methods. The results obtained revealed that the inhibitor tested differently reduced the kinetics of the corrosion process of steel. Its efficiency increases with the concentration and attained 92.87 % at 35 %. The effect of temperature on the corrosion behavior of steel in 1 M HCl was also studied in the range 298 and 338 K. The thermodynamic data of activation were determined. Mentha rotundifolia extract is adsorbed on the steel surface according to a Langmuir adsorption model.     

Anticorrosive property of Spiraea Cantoniensisis extract as an eco-friendly inhibitor on mild steel surface in acid medium

Abstract

The inhibitive performance of methanolic extract of eco-friendly green inhibitor Spiraea cantoniensis (S. cantoniensis) on inhibiting corrosion of mild steel (MS) in 1?M HCl was studied by weight loss, AC-impedance, Fourier transform infrared spectroscopy (FT-IR), Raman, x-ray diffraction (XRD), ultraviolet-visible (UV-Vis), atomic absorption spectroscopy (AAS), and scanning electron microscopy (SEM) analysis. The results showed that the corrosion rate significantly decreased in the presence of the S. cantoniensis inhibitor with a gradual increase in inhibition efficiency at an increased inhibitor concentration. The temperature studies were conducted which included activation energy (E_a), change in enthalpy (ΔH°_ads), change in entropy (ΔS°_ads), change in free energy (ΔG°_ads) and heat of adsorption (Q_ads). These calculations were helpful to determine the reaction mechanism and proved it as a physisorption type following the Langmuir adsorption isotherm. The analysis of the protective film using FT-IR, Raman, XRD, and SEM analysis clearly showed the potentiality of S. cantoniensis in blocking the MS surface to prevent corrosion by 1?M HCl. The solution analysis via AAS and UV-Vis showed the inhibitive effect of the inhibitor (S. cantoniensis) in both inhibitive and the uninhibitive solution exhibiting the adsorption of the phytochemical molecules on the MS surface.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

Adsorption Behavior and Inhibition Corrosion Effect of Sodium Carboxymethyl Cellulose on Mild Steel in Acidic Medium

The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L⁻¹ HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298–328 K. The associated apparent activation energy (E^*_a) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.     

Coconut coir dust extract: a novel eco-friendly corrosion inhibitor for Al in HCl solutions

Abstract

Corrosion inhibition of aluminium in 1 M HCl by coconut coir dust extract (CCDE) was studied using weight loss and hydrogen evolution techniques at 30 and 60°C. It was found that the studied extract exhibits a very good performance as inhibitor for aluminium corrosion in 1 M HCl. Results show that the inhibition efficiency increases with increasing temperature and concentration of the extract. Inhibitive effect was afforded by adsorption of the extracts' components which was found to accord with Langmuir adsorption isotherm. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency and was further corroborated by the values of activation parameters obtained from the experimental data.     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.     

The effect of 2-aminoquinoline-6-carboxylic acid on the corrosion behavior of mild steel in hydrochloric acid

The inhibitive effect of 2-aminoquinoline-6-carboxylic acid (AQC) against mild steel corrosion in 1?M HCl solutions was investigated using conventional weight loss, potentiodynamic polarization, linear polarization and electrochemical impedance spectroscopy methods. The weight loss results showed that AQC is an excellent corrosion inhibitor since its efficiency increased with the concentration to attain 91.8?% at 500?mg?l^?1. Electrochemical polarization measurements revealed that AQC acted as a mixed-type inhibitor and the results of electrochemical impedance spectroscopy have shown that the change in the impedance parameters, charge transfer resistance and double layer capacitance, with the change in concentration of the inhibitor is due to the adsorption of the molecule leading to the formation of a protective layer on the surface of mild steel. The adsorption was assumed to occur on the steel surface through the active centers of the molecule. The inhibition action of AQC was discussed in view of Langmuir adsorption isotherm. Density functional theory calculations of quantum parameters were used to explain efficiency in relation with molecular structure.     

Interactions and corrosion mitigation prospective of pyrazole derivative on mild steel in HCl environment

The effectiveness of 1H?pyrazole?3,5?dicarboxylic acid 5?benzyl ester 3?phenyl ester (PCBPE) as a preventer for deterioration of IS 513 Gr. D steel in 1 M HCl medium is evaluated via weight loss, electrochemical impedance, and polarization techniques. Kinetic and thermodynamic parameters assessed the feasibility of the adsorption process at diverse temperatures. The inhibition action on mild steel has been enhanced with increasing PCBPE concentration. It is found from the polarization studies that PCBPE behaves as mixed type inhibitor in HCl medium. The adsorption process of PCBPE on mild steel surface from acid environment is favoured Langmuir adsorption isotherm. The shielding efficiency of PCBPE has been enhanced at elevated concentrations, and it has been diminished at amplified temperatures. The Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM), and Energy Dispersive Spectrum (EDS) were used to establish a surface characterization of metal specimens. A quantum chemical analysis of electron density distributions in the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) demonstrated how the inhibitor undergoes adsorption on mild steel in 1 M HCl. All experimental findings substantiate the corrosion mitigation performance of PCBPE on mild steel in acidic environments.     

Inhibitory Action of Funtumia elastica Extracts on the Corrosion of Q235 Mild Steel in Hydrochloric Acid Medium: Experimental and Theoretical Studies

The inhibiting effect of aqueous extracts of Funtumia elastica (FE) on mild steel corrosion in 1 M HCl solution was investigated using electrochemical and surface characterization techniques. The results revealed that FE effectively inhibited the corrosion reaction. Polarization data reveal that the extract functioned as a mixed-type inhibitor, while impedance results show that the extract organic matter gets adsorbed on the metal/solution interface. Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy results confirmed the formation of a protective layer of extract adsorbed on the mild steel surface. Adsorption of some organic constituents of FE on mild steel was theoretically described by quantum chemical computations and molecular dynamics simulations, in the framework of the density functional theory.     

Extract sarampa wood (Xylocarpus Moluccensis) as an eco-friendly corrosion inhibitor for mild steel in HCl 1M

Plant extracts are currently being used as eco-friendly corrosion inhibitors. In this study, the inhibitive performance of Xylocarpus Moluccensis extract (XME) was used as an eco-friendly corrosion inhibitor for the first time. The extract was studied using electrochemical measurement on mild steel in 1M HCl. Results from FIR and phytochemical confirmed that Xylocarpus Moluccensis extract contains compound hydroxyl group, phenolic, and flavonoid content which can be used as a corrosion inhibitor. The inhibition efficiency was determined using Tafel polarization and electrochemical impedance spectroscopy and showed 68% efficiency in 500 ppm. Langmuir adsorption isotherm was used to determine the adsorption mechanism of XME. Surface characterization (AFM) was also used to study the surface morphology of protective film inhibitors.     

Aqueous extract of Acacia cyanophylla leaves as environmentally friendly inhibitor for mild steel corrosion in 1 M H2SO4 solution

The efficiency of Acacia cyanophylla leaves extract as an environmentally friendly inhibitor for mild steel in aerated aqueous 1 M H₂SO₄ solution has been investigated by potentiodynamic polarization measurements and electrochemical impedance spectroscopy techniques. Addition of inhibitor decreases the corrosion current whereas the corrosion potential values show slight shifts in positive directions. Inhibition efficiency was found to be about 93% (the maximum value was determined from the polarization curve). Efficiencies obtained from both electrochemical techniques are in good agreement. Adsorption of Acacia cyanophylla leaves extract on mild steel surface in 1 M H₂SO₄ solution obeys Langmuir adsorption isotherm. Polarization curves were also obtained at different temperatures in order to measure changes of corrosion rate. Corrosion current increases and inhibition efficiency decreases with temperature increasing in H₂SO₄ solutions with and without Acacia cyanophylla extract. Corrosion parameters also changed with exposure time. Copyright © 2010 John Wiley & Sons, Ltd.     

Polyvinyl alcohol–sulphanilic acid water soluble composite as corrosion inhibitor for mild steel in hydrochloric acid medium

The inhibitive action of synthesised polyvinyl alcohol–sulphanilic acid (PVASA) composite on the corrosion of commercial mild steel in 1 M HCl medium has been investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopic (EIS) methods. Characterization of PVASA composite has been carried out using Fourier transform infrared spectroscopy (FTIR). Experimental results reveal that PVASA composite acts as an inhibitor in the acid environment. The inhibition efficiency increases with an increase in the concentration of the inhibitor. Maximum inhibition efficiency of PVASA composite was found to be 84% at 6000 ppm. Thermodynamic and kinetic parameters have been obtained from temperature studies. Electrochemical measurement reveals that PVASA composite acts as a mixed inhibitor and the adsorption follows Langmuir adsorption isotherm.     

酸性介质中羧甲基纤维素钠在低碳钢表面的吸附和缓蚀作用

The effect of sodiumcarboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L-1 HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L -1 HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298-328 K. The associated apparent activation energy (E*a) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.     

A sustainable method of mitigating acid corrosion of mild steel using jackfruit pectin (JP) as green inhibitor: Theoretical and electrochemical studies

This study is attempted to develop a green corrosion inhibitor from a waste material of Jack fruit (Artocarpus heterophyllus). This method is therefore quite valuable to health, environment, and economic point of view. Pectin is isolated from the jackfruit peel waste using 0.05 ?N oxalic acid and used as an inhibitor for mild steel corrosion in acidic environment as it is highly water soluble. 250–1000 ?ppm of pectin was used in this study at a temperature range of 303–323 ?K. The protection efficiency of jack fruit pectin (JP) in 0.5 ?M HCl was evaluated by conventional weight loss and electrochemical techniques. The potentiodynamic polarization results revealed that JP could effectively reduce the corrosion of mild steel in acidic medium at 1000 ?ppm concentration with an inhibition efficiency of 89.75% and corrosion rate of 2.392 mpy. The mixed type behavior of the inhibitor is identified from Tafel polarization studies. Electrochemical impedance spectroscopy (EIS) measurements suggest that the corrosion inhibition process is kinetically controlled. adsorption and kinetic behavior of the inhibitor also have been studied. Surface manifestations were followed using FESEM and AFM techniques. DFT calculations and Monte Carlo simulations were also carried out to corroborate the experimental results with theoretical outputs and succeeded to a great extent.