Activated Fly Ash Catalyzing the Synthesis of Novel Potent 4-Thiazolidinones of 4-Amino Antipyrine Anils Using CEM Discover Microwave Methodology and Their Virtual Screening

Abstract

Fly ash, an industrial waste, has been used as an efficient and cost-effective activating catalyst for the synthesis of new potent thiazolidinones (4a–n), starting from imine (3a–n) and thioacetic acid. The reactions were performed under CEM Discover microwave irradiation in solvent-free conditions. This reaction is scalable to a multigram scale and the methodology has resulted in an efficient synthesis. Herein, a benign, environment friendly, efficient, and extremely fast procedure for the synthesis of thiazolidinones have been demonstrated. The produced thiazolidinone molecules were characterized on the basis of elemental analysis, infrared (IR), mass spectral, and ¹H NMR spectral data. The synthesized moieties were screened virtually and discussed for their possible biological activity.     

Eco-friendly development: synthesis of 3-(2-chloroquinolin-3-yl)-1-aryl prop-2-en-1-one using K2CO3–Al2O3 under ultrasonic radiations

Abstract

K₂CO₃–Al₂O₃ has been used as an efficient, eco-friendly, and cost-effective activating catalyst for the synthesis of 3-(2-chloroquinolin-3-yl)-1-substituted phenyl prop-2-en-1-ones starting from 2-chloroquinoline-3-carbaldehyde and acetophenone. The reactions were performed under ultrasound irradiations. A substantial enhancing effect in the yield was observed when the catalyst was activated under ultrasonic waves. The K₂CO₃–Al₂O₃ catalyst can compete with the traditional NaOH/MeOH system of catalysis when the reaction is carried out under ultrasound. Herein, a benign, eco-friendly, efficient, and extremely fast procedure for the synthesis of quinoline chalcones has been demonstrated successfully.     

Nano-Cuo–Au-catalyzed solvent-free synthesis of α-aminophosphonates and evaluation of their antioxidant and α-glucosidase enzyme inhibition activities

A new green and efficient method has been developed for the synthesis of α-aminophosphonates through one-pot three-component Kabachnik–Fields reaction. It involves the reaction of a 2-aminophenol with different substituted aromatic aldehydes and dimethyl phosphite in the presence of nanocopper oxide–gold (CuO–Au) catalyst under solvent-free conditions at 60?°C. Nano-CuO–Au catalyst was found to have many advantages like high activity, simple workup, and good (87%) to very high yields (96%). The products were characterized by IR, ¹H, ¹³C, and ³¹P NMR spectra and elemental analysis. All the synthesized compounds were screened for in vitro antioxidant and α-glucosidase inhibition activities. The compound 4b showed higher 2,2-diphenyl-1-picrylhydrazyl and H₂O₂ radical scavenging activity and compound 4e showed higher NO radical scavenging activity than the standard ascorbic acid. The compound 4j has much higher α-glucosidase enzyme inhibition activity than the standard acarbose.     

Four-component,one-pot synthesis of spiropyrazolo pyrimidine derivatives by using recyclable nanocopper ferrite catalyst and antibacterial studies

A simple, efficient, ecofriendly, and cost-effective method has been developed for the synthesis of 16 spiropyrazolo pyrimidine derivatives (5a–5p) by a four-component, one-pot reaction of pyrimidine-2,4,6(1H,3H,5H)-trione, 3-oxo-3-phenylpropanenitrile, hydrazine, and isatins (4a–4f) by using nanocopper ferrite catalyst (20?mol%) in water with excellent yields (73–91%). The isatin with electron-withdrawing groups gave products in high yields (5h and 5p). The present methodology offers an environmentally benign, cost-effective, high-yielding method with recyclable catalyst. The drug likeness or “drugability” of all the synthesized compounds were tested through rule of five (RO5) parameters. Compounds 5f, 5h, 5n, and 5p have shown one RO5 violation each. The compounds were screened for their antibacterial activity against human pathogenic bacteria wherein two of the synthesized compounds were found to possess significant antibacterial activity. Compounds showing RO5 violations had negligible antibacterial activity.     

Microwave-Assisted One-Pot Synthesis of Bioactive UGI-4CR Using Fluorite as Benign and Heterogeneous Catalyst

Fluorite has been used as an activating heterogeneous catalyst for a rapid and facile one-pot synthesis of biologically active Ugi four-component reaction (Ugi-4CR) under microwave irradiation in good to moderate yields with short reaction times. The catalyst is environmentally benign, commercially available, and reusable several times with no reduction in its efficiency. The resulting Ugi derivatives 5(a–h) were characterized on the basis of ¹H and ¹³C NMR, infrared, elemental analysis, and mass spectral data. The synthesized moieties were screened for their potential antibacterial activities in vitro against a few microorganisms: Staphylococcus aureus (Gram positive), Bacillus subtilis (Gram positive), Escherichia coli (Gram negative), and Proteus vulgaris (Gram negative). The screening data show that compounds 5a, 5c, 5e, and 5h are highly active against the strains.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

One-Pot,Facile, Highly Efficient,and Green Synthesis of Acridinedione Derivatives Using Vitamin B1

An efficient methodology for the synthesis of acridinedione derivatives 4a–o has been achieved by one-pot, multicomponent condensation of dimedone 1, various amines 2a–d, and substitute aromatic aldehydes 3a–k, in the presence of the easily available, inexpensive, and nontoxic catalyst vitamin B₁ (VB₁) as a versatile biodegradable. Synthesis of acridine-type compounds was performed in good yields in water as green solvent. Its high-yield efficiency; clean, ecofriendly, simple workup procedure; and easy purification are regarded as the main advantages of this method besides its green solvent. The synthesized compounds are characterized using spectroscopic analyses (FTIR, ¹H NMR, ¹³C NMR, and high-resolution mass spectrometry) techniques.     

Efficient and versatile catalysis for β-alkylation of secondary alcohols through hydrogen auto transfer process with newly designed ruthenium(II) complexes containing ON donor aldazine ligands

A new series of ruthenium(II) carbonyl complexes, [RuCl(CO)(EPh₃)₂(L_1-2)] (1–4) (E = P or As; H₂L₁ = salicylaldazine, H₂L₂ = 2-hydroxynaphthaldazine), have been assembled from ruthenium(II) precursors [RuHCl(CO)(EPh₃)₃] and bidentate ON donor Schiff base ligands (H₂L_1-2). Both ligands and their new ruthenium(II) complexes have been characterized by elemental analyses, spectroscopic methods (UV, IR, NMR (¹H, ¹³C, ³¹P) as well as ESI mass spectrometry. The molecular structures of H₂L₁ and 1 have been confirmed by single crystal X-ray diffraction. Based on the above studies, an octahedral coordination geometry around the metal center has been proposed for 1–4. To investigate the catalytic effectiveness of 1–4, the complexes have been used as catalysts in β-alkylation of secondary alcohols with primary alcohols and synthesis of quinolines. The effect of solvent, time, base, catalyst loading, and substituent of the ligand moiety on the reaction was studied. Notably, 1 was a more efficient catalyst toward alkylation of a wide range of alcohols and quinolines synthesis. The reusability of the catalyst was checked and the results showed up to six catalytic runs without significant loss of activity.     

One-pot sequential synthesis of quinazolin-8-ol derivatives employing heterogeneous catalyst for Suzuki–Miyaura coupling

Abstract

We report herein an efficient and eco-friendly method for a one-pot sequential synthesis of quinazolin-8-ol derivatives. A variety of boronic acids were used for Suzuki–Miyaura coupling with commercially available SiliaCat?®?DPP-Pd heterogeneous catalyst. Use of this catalyst ensures minimal leaching of palladium in the product and alleviates the need of further purification. The reaction conditions used in the four synthetic steps were optimized to telescope three intermediates without first requiring their isolation to establish an efficient and eco-friendly one-pot synthesis.     

Cp*Co(III) catalyzed annulation of N-Cbz hydrazones for the redox-neutral synthesis of isoquinolines via C–H/N–N bond activation

Abstract

A new cascade oxidative cyclization reaction of N-Cbz hydrazones with internal alkynes has been explored for the preparation of isoquinoline derivatives using Cp*Co^III-catalyst through C–H and N–N bond functionalization. N-Cbz hydrazones are rarely explored as directing group for redox-neutral [4?+?2] cyclization reaction through the cyclometallation and this catalyst system does not require any external oxidizing agent, as well as, silver or antimony salt. The current efficient approach has been utilized for the synthesis of different isoquinoline derivatives with good regioselectivity and yields.     

Ultrasound-promoted green approach for the synthesis of multisubstituted pyridines using stable and reusable SBA-15@ADMPT/H5PW10V2O40 nanocatalyst at room temperature

ABSTRACT

A facile one-pot protocol for the synthesis of 2-amino-3-cyanopyridins using SBA-15@Triazine/H₅PW₁₀V₂O₄₀ as an efficient catalyst under ultrasonic conditions has been developed. The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol- 1-yl)-1,3,5-triazine (ADMPT) linker. Then the nanohybrid was used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 2-amino-3-cyanopyridin derivatives from the reaction of aldehydes, malononitrile, cyclic ketones and ammonium acetate under ultrasound waves with good to excellent yields (79–95%) and in a short span of time. This nanocatalyst was characterized by using FT-IR, XRD, SEM, TEM, BET, and EDX techniques.     

A synthesis and biological screening of newly substituted 9-methyl-6-aryl-[1,2,4]triazolo[4,3-a][1,8]naphthyridines using chloranil

An effective, mild, and convenient method for the synthesis of 10 new substituted 9-methyl-6-aryl-[1,2,4]triazolo[4,3-a][1,8]naphthyridines (5a–j) by the oxidation of the corresponding 2-(2-ethylidenehydrazinyl)-3-aryl-1,8-naphthyridines (4a–j) using chloranil under conventional method has been described. The structures of synthesized compounds (5a–j) were established on the basis of their elemental analysis and spectral (IR, Mass, ¹³C- and¹H-NMR) data. The new compounds were synthesized with the objective of studying their antibacterial activity. The reaction will be characterized by easy workup, good efficacy, simple purification of the products, and availability of catalyst.     

Total Synthesis of (±)-Isocembrene: A Tactic for Both Diene Construction and Macrocycle Formation

Abstract

The total synthesis of (±)-isocembrene 1, a naturally occurring cembrene diterpenoid, has been achieved via a unified, convergent and highly efficient strategy by imploying an intramolecular Stille sp²–sp² macrocyclization as the key step and it presents an ideal opportunity to extend the effectiveness of the tactic for both 1,3-diene construction and macrocycle formation.     

Visible-light-mediated Gomberg-Bachmann reaction: An efficient photocatalytic approach to 2-aminobiphenyls

An efficient, metal-free and highly selective protocol for the synthesis of 2-aminobiphenyls via visible-light-mediated arylation of anilines using aryl diazonium salts (Gomberg-Bachmann reaction) has been reported. The reaction is an example of photoredox catalysed direct C(sp²)–H arylation of anilines using eosin Y as an organophotoredox catalyst. The presented visible-light-mediated environmentally sustainable approach has the potential to earn a decent position among the classical and contemporary methods for the synthesis of aminobiaryls.     

An efficient synthesis,spectral characterization,antimicrobial, and antioxidant activities of novel α-hydroxyphosphonates and α-hydroxyphosphinates

A simple, novel, and an efficient synthesis of α-hydroxy phosphonates (3a–d) and phosphinates (5a–f) has been accomplished from febuxostat aldehyde (1) with various dialkylphosphites (2) and dialkylphosphinates (4) in the presence of 1, 4-dimethylpiperazine as a strong base with good to excellent yields (78%–95%) is reported. The structures of the title compounds were established by elemental analysis and spectral data (IR, ¹H, ¹³C and ³¹P NMR, and LC-MS). All the title compounds (3a–d) and (5a–f) were tested for their antimicrobial and antioxidant activities. Bioassay results reveal that a few of the title compounds exhibited promising antimicrobial and antioxidant activities.     

Characterization of Fe/N-doped graphene as air-cathode catalyst in microbial fuel cells

This work proposed a simple and efficient approach for synthesis of durable and efficient non-precious metal oxygen reduction reaction(ORR) electro-catalysts in MFCs. The rod-like carbon nanotubes(CNTs)were formed on the Fe–N/SLG sheets after a carbonization process. The maximum power density of1210 ± 23 m W·m~(-2) obtained with Fe–N/SLG catalyst in an MFC was 10.7% higher than that of Pt/C catalyst(1080 ± 20 mW ·m~(-2)) under the same condition. The results of RDE test show that the ORR electron transfer number of Fe–N/SLG was 3.91 ± 0.02, which suggested that ORR catalysis proceeds through a four-electron pathway. The whole time of the synthesis of electro-catalysts is about 10 h, making the research take a solid step in the MFC expansion due to its low-cost, high efficiency and favorable electrochemical performance. Besides, we compared the electrochemical properties of catalysts using SLG, high conductivity graphene(HCG, a kind of multilayer graphene) and high activity graphene(HAG, a kind of GO) under the same conditions, providing a solution for optimal selection of cathode catalyst in MFCs.The morphology, crystalline structure, elemental composition and ORR activity of these three kinds of Fe–N/C catalysts were characterized. Their ORR activities were compared with commercial Pt/C catalyst.It demonstrates that this kind of Fe–N/SLG can be a type of promising highly efficient catalyst and could enhance ORR performance of MFCs.     

CeCl3·7H2O Catalyzed,Microwave-Assisted High-Yield Synthesis of α-Aminophosphonates and their Biological Studies

Abstract

A new class of diethyl(3,5-dibromo-4-hydroxyphenylamino) (substituted phenyl/heterocyclic) methylphosphonates 4(a–j) has been synthesized by one-pot three component simultaneous reaction (Kabachnik–Fields) of 4-amino-2,6-dibromophenol 1, substituted heterocyclic/phenyl aldehydes 2(a–j), and diethylphosphite 3 using a Lewis acid catalyst, CeCl₃·7H₂O (5 mol%) under microwave irradiation as well as conventional conditions. It was observed that microwave irradiation method is more facile, efficient, and advantageous with respect to reaction time and yields. The structures of all the synthesized compounds were supported by analyzing IR, ¹H/¹³C/³¹P NMR, and mass spectral data. The synthesized compounds were screened for their in vitro antimicrobial and antioxidant activities.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Synthesis of Nitriles from Aldoximes Using Silica Gel as Catalyst Under Microwave Irradiation

Abstract

A rapid and efficient synthesis of nitriles via dehydration from the corresponding aldoximes has been carried out in the presence of Silica gel as catalyst under microwave irradiation in 83–95% yield.     

A Fast and Large-Scale Synthesis of 3-Formyl-2-mercaptoquinolines

A convenient, efficient, and inexpensive procedure for the synthesis of 3-formyl-2-mercaptoquinolines 2a–l has been developed by a simple one-pot reaction of 3-formyl-2-chloroquinolines 1a–l with sodium sulfide and hydrochloric acid in ethanol. The structures of all the synthesized compounds were elucidated on the basis of elemental analyses and IR, ¹ H NMR, and mass spectral data.     

Expeditious,Nano-BF3 · SiO2-Catalyzed Michaelis–Arbuzov Reaction in an Ionic Liquid: Synthesis of Privileged Aryl/Heterocyclic Phosphonates

An expeditious, simple, and green method was developed for the synthesis of privileged aryl/heterocyclicphosphonates, 8(a–c) to 13(a–c) through Michaelis–Arbuzov reaction of aryl/heterocyclic halides (Br), 1–6, and trialkylphosphites, 7(a–c), in room-temperature ionic liquid [bbim]Br using heterogeneous Lewis catalyst, nano-silica-supported boron trifluoride (BF₃-SiO₂). The advantages of this protocol are simplicity, good yield of the products, less reaction time (20–38 min), mild reaction conditions, easy workup, and reusability of the catalyst and ionic liquid. It is demonstrated that nano-BF₃-SiO₂ is a recoverable and easy accessible catalyst for the formation of C(sp²)-P bond in an ionic liquid.