Application of porous membrane protected micro-solid-phase-extraction combined with gas chromatography-mass spectrometry for the determination of estrogens in ovarian cyst fluid samples

A cost effective and environmentally friendly extraction technique using porous membrane protected micro-solid phase extraction (μ-SPE) is described for the extraction of estrogens in cyst fluid samples obtained from cancer patients. A sorbent (ethylsilane (C2) modified silica) (20 mg) was packed in a porous polypropylene envelope (2 cm × 1.5 cm) whose edges were heat sealed to secure the contents. The μ-SPE device was conditioned with acetone and placed in a stirred (1:5) diluted cyst fluid sample solution (10 mL) to extract estrogens for 60 min. After extraction, the analytes were desorbed and simultaneously derivatized with a 5:1 mixture of acetone and N,O-bis(trimethylsilyl)-trifluoroacetamide. The extract (2 μL) was analyzed by gas chromatography–mass spectrometry. Various extraction, desorption and derivatization conditions were optimized for μ-SPE. With this simple technique, low limits of detection of between 9 and 22 ng L⁻¹ and linear range from the detection limits up to 50 μg L⁻¹ were achieved. The optimized method was used to extract estrogens from cyst fluid samples obtained from patients with malignant and benign ovarian tumors.     

Thiazolium Salt Immobilized on Ionic Liquid: An Efficient Catalyst and Solvent for Preparation of α-Hydroxyketones

Aldehydes were efficiently converted to acyloins and benzoins using a new ionic liquid, 3-[2-(1-butyl-1H-imidazol-1,3-ium-3-yl)ethyl]-4,5-dimethyl-1,3-thiazol-3-ium dibromide 1 . This ionic liquid is introduced as a catalyst and a solvent. Acyloins and benzoins were easily isolated from the reaction mixture via simple extraction, and the ionic liquid could be recycled for further use. Also, α-hydroxy ketones with an aromatic and aliphatic substituent were prepared starting from aromatic and aliphatic aldehydes in the presence of ionic liquid 1 .     

Synthesis of 1,2-bis(1-boraadamant-2-yl)ethane derivatives. Crystal structure of the racemic form

Condensation of triallylborane with octa-1,7-diyne followed by treatment of the reaction mixture with methanol afforded a mixture of stereoisomeric 1,4-bis(3-methoxy-3-bora-bicyclo[3.3.1]non-6-en-7-yl)butanes (1a,b). Hydroboration of the latter with a solution of BH₃ in THF yielded the tetrahydrofuran complex of 1,2-bis(1-boraadamant-2-yl)ethane (2) as a mixture of diastereomers. Pure racemate (2a) was obtained by crystallization from the reaction mixture and it was converted into the pyridine complex of 1,2-bis(1-boraadamant-2-yl)ethane (3). The structure of the latter was established by X-ray diffraction analysis. Complex2a was converted into the corresponding racemic 1,2-bis(1-hydroxyadamant-2-yl)ethane (4a) by the carbonylation-oxidation reaction. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 501–505, March, 2000.     

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Termite Trail Attractants: New Syntheses of Racemic (E)-α-, (Z)-α- and β-Bisabolenes

Racemic (E)-α-bisabolene (E)(1) was synthetized starting from 4-methyl-3-cyclohexenecarboxylic acid (3) by a reaction sequence involving the Pd(0)-catalyzed cross-coupling reaction between the (E)-2-methyl-1-alkenyltrimethylstannane 8 and 3-methyl-2-buten-1-yl acetate (9). Three different procedures, in which a common precursor was used as key intermediate, were tested for the synthesis of racemic (Z)-α-bisabolene (Z)(1). The best one, which involved the reaction between bromide 18 and lithium dialkenylcuprate 19, afforded a mixture of (Z)- and (E)-1 in a 93 : 7 molar ratio, respectively. Finally, racemic β-bisabolene (2) was synthetized by a simple reaction sequence involving the Zr-promoted methylenation of ketone 22 prepared from 3.     

Efficient Synthesis of New Nucleoside Analogues with a Methylenecyclobutane Unit

Synthesis of eight nucleoside analogues 4–11 with a methylenecyclobutane unit is described. Wittig reaction with 2‐hydroxymethylcyclobutanone 12 gave a mixture of Z (13) and E (14) derivatives, which was separated before functional modifications. The heterocyclic moieties were introduced via a Mitsunobu reaction either on the saturated chain or on the unsaturated chain. When adenine was used in this reaction, only the N‐9 substitution products were obtained. Removal of the protecting groups provided the target products.     

Kinetic Study of Radical Polymerization VI. Copolymer Composition and Kinetic Parameters for Coplymerization of Styrene‐Itaconic Acid by On‐Line 1H‐NMR

Free radical solution copolymerization of styrene (St) and itaconic acid (IA) in dimethylsulfoxide‐d₆ (DMSO‐d₆) as the solvent and the use of 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at 78°C was investigated by an on‐line ¹H‐NMR spectroscopy technique. Individual monomer conversion vs. reaction time, which was calculated from the ¹H‐NMR spectra data, was used to study the drift in monomer mixture composition vs. conversion. It was found that in general, both monomers were incorporated almost equally into the copolymer. However, when the mole fraction of IA was low, the tendency of IA toward incorporation into the copolymer chain was somewhat higher than St and by increasing the mole fraction of IA in the reaction mixture, the inverse tendency was observed. Overall monomer conversion as a function of time was calculated from individual monomer conversion data and used for the estimation of k_p /k_t ^0.5 for various monomer mixture compositions. This ratio was decreased with increasing the amount of IA in the initial feed, indicating a decrease in the rate of copolymerization. Changes in the copolymer composition vs. overall monomer conversion were investigated experimentally from the NMR spectra. This was in good agreement with the changes in monomer mixture composition vs. reaction progress. Plotting the copolymer composition vs. initial monomer feed showed tendency of the system toward alternating copolymerization.     

Application of Sulfonic Acid Functionalized SBA‐15 as a New Nanoporous Acid Catalyst in the Green One‐Pot Synthesis of Spirooxindole‐4H‐pyrans

Sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO₃H) as a new nanoporous solid acid catalyst was applied in the green one‐pot synthesis of spirooxindole‐4H‐pyrans via condensation of isatins, malononitrile or methyl cyanoacetate or ethyl cyanoacetate, and 4‐hydroxycoumarin in water solvent. SBA‐Pr‐SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm that could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused for several times without any loss of activity. The significant merits of present methodology are its simplicity, short reaction time, good yields, and environmentally benign mild reaction condition as water was used as a green solvent.     

Facile preparation of a polydopamine‐based monolith for multiple monolithic fiber solid‐phase microextraction of triazine herbicides in environmental water samples

A new multiple monolithic fiber solid‐phase microextraction using a polydopamine‐based monolith as the extraction medium is proposed. The monolith was synthesized by facile in situ copolymerization of N‐methacryldopamine and dual cross‐linkers (divinylbenzene/ethylenedimethacrylate) in the presence of N ,N‐dimethylformamide. The effect of the contents of N‐methacryldopamine and porogen in the polymerization mixture on the extraction performance was investigated thoroughly. A series of characterization studies was performed to validate the structure and properties of the monolith. The prepared multiple monolithic fibers were used for the extraction of triazine herbicides in environmental water samples. After the optimization of the extraction parameters, a convenient, sensitive, cost‐effective, and environmentally friendly method for the determination of trace triazine herbicides in water samples was developed by coupling multiple monolithic fibers solid‐phase microextraction with high‐performance liquid chromatography and diode array detection. The results indicated that the limits of detection and quantification for the target compounds were 0.031–0.14 and 0.10–0.45 μg/L, respectively. Good precision and reproducibility were obtained with the relative standard deviations below 10%. The developed method was applied to the analysis of the triazine herbicides in different water samples (lake, river, and farmland waters). The recoveries of the method were in the range between 79.6 and 117%.     

The green synthesis of 2,3-dihydroquinazolin-4(1H)-ones via direct cyclocondensation reaction under catalyst-free conditions

ABSTRACT

A simple and environmentally benign method is described for the synthesis of 2,3-dihydroquinazolin-4(1H)-ones by direct cyclocondensation of 2-aminobenzamide with aromatic aldehydes using water as the reaction medium. The parameters such as temperature, substrate molar ratio and reaction time were examined to establish the optimal synthetic process. The present procedure has advantages of low cost, mild reaction conditions, simple workup process, simply purification, excellent yields and no use of catalyst and hazardous organic solvents.     

Iron powder and tin/tin chloride as new reducing agents of Meerwein arylation reaction with unexpected recycling to anilines

Abstract

Simple and rapid route for Meerwein arylation reaction using iron powder or a mixture of tin/tin chloride has been developed. In the presence of iron powder, different aryl diazonium salts reacted with methyl vinyl ketone, acrylates, and isopropenyl acetate. Production of oximes was detected as the main product with acrylates or in a mixture with β-aryl methyl ketones in the case of methyl vinyl ketone. The in situ produced HNO₂ from an excess of NaNO₂/HCl was trapped by alkyl aryl radical to form oximes in the E configuration form. The presence of tin/tin chloride mixture in the reaction of the aryl diazonium salts with methyl vinyl ketone produced Michael products along with β-aryl methyl ketones. The predicted α-aryl methyl ketones from the reaction of isopropenyl acetate with the diazotized anilines were obtained using iron or tin/tin chloride mixture.     

Metal- and Solvent-Free Transesterification and Aldol Condensation Reactions by a Homogenous Recyclable Basic Ionic Liquid Based on the 1,3,5-Triazine Framework

A new recyclable basic ionic liquid was introduced as an efficient catalyst for aldol condensation and transesterification reactions under environmentally friendly conditions. The catalyst was prepared based on methyl imidazolium moieties bearing hydroxide counter anions via the Hofmann elimination on a 1,3,5-triazine framework. The ionic liquid with two functionalities including anion stabilizer and high basicity, was used as an efficient catalyst for aldol condensation as well as transesterification reaction of a variety of alkyl benzoates. All reactions were performed in the absence of any external reagent, co-catalyst, or solvent, in line with environmental protection. The kinetics isotope effect (KIE) was conducted for the transesterification reaction to elucidate the mechanism and rate determining step (RDS). It worth noted that, the homogeneous catalyst could be recycled from the reaction mixture and reused for several consecutive runs with insignificant drop of basicity and conversion.     

Aromatische Spirane, 23. Mitt.: Darstellung von unsymmetrisch substituierten Dimethyl-2,2′-Spirobiindan-1,1′-dionen

Summary Both spirodiketones7 and8 were obtained as a mixture (56:44) by treatment of dicarbonic acid5 with polyphosphoric acid (PPA).5 was accessible from dimethylester3, synthesized byretro-Claisen reaction between1 and2. In the same way,30 was obtainedvia 27. The preparation of the pure spiro compounds7 and8, resp., was achieved by aldol reaction between9 and10 or9 and16, resp. Short treatment of the resulting compounds11 and17 with diazomethane yielded the methylbenzoates12 and18. Prolonged reaction (several hours) gave the pyrazole compounds14 and19, resp., which were also obtained (several days) from phthalides14 and20. The latter were formed from the benzylidene compounds11 and17, resp., by heating.11 and17 (after hydrogenation to15a and21a) were cyclized either withPPA or thermically to the spiro compounds7 and8. The main product20 was cyclized thermically to8 after reduction with zinc to a mixture of21a and8 (20:75).

     

Reaction of Dimethyl Acetylenedicarboxylate With 2-Mercaptoperimidine and 2-Mercaptobenzimidazole

A mixture of equimolar quantities of dimethyl acetylenedicarboxylate ( 2 ) with either 2-mercaptoperimidine ( 1 ) or 2-mercaptobenzimidazole ( 5 ) was heated in absolute benzene in the presence of triphenylphosphine as a catalyst under reflux conditions for 1 h (the reaction was monitored by TLC until the consumption of the starting materials). The solvent was concentrated under vacuum and the residue was subjected to chromatographic plates using toluene-ethylacetate (2:1) as an eluent. The products in each reaction were separated as two migrating zones. Each zone was removed from the plate and recrystallized from the appropriate solvent. The products of the first reaction are 10-methoxy-11-oxo-11H-8-thia-7,11a-diaza-benzo[de]anthracene-9-carboxylic acid methyl ester ( 3 ) and 8-thia-7,10a-diaza-cyclopenta[a]phenalene-9,10-dicarboxylic acid dimethyl ester ( 4 ), while the products of the second reaction are 3-methoxy-4-oxo-4H-1-thia-4a,9-diaza-fluorene-2-carboxylic acid methyl ester ( 10 ) and benzo[4, 5]imidazo[2,1-b]thiazole-2,3-dicarboxylic acid dimethyl ester ( 11 ). The mechanisms of the observed reactions are suggested.     

Application of a bisindocarbocyanine reagent for dispersive liquid–liquid microextraction of silver with subsequent spectrophotometric determination

A novel, simple and environmentally friendly procedure for silver determination has been developed. The method is based on ion associate formation of AgI₂⁻ and bisindocarbocyanine chloride (BDIC) reagent, followed by dispersive liquid–liquid microextraction (DLLME) of the ion associate formed and subsequent UV–Vis spectrophotometric detection. The structure of BDIC and the reaction mechanism were investigated by MS and NMR measurements and quantum chemical calculations.The optimum experimental conditions were found to be: pH 6; 0.1 mol L^{− 1} KI; 5 × 10^{− 5} mol L^{− 1} BDIC. The DLLME procedure was carried out using an auxiliary solvent for adjustment of solvent density. A 0.5 mL mixture of toluene as extraction solvent, carbon tetrachloride as auxiliary solvent and ethanol as disperser solvent was used. Ultrasonication of the organic phase was applied to decrease the value of the blank test. The absorbance of the coloured extracts obeys Beer's law in the range 0.07–2.1 mg L^{− 1} of Ag at 566 nm wavelength. The limit of detection, calculated from a blank test (n = 10) based on 3 s, is 0.03 mg L^{− 1} of Ag. The developed procedure was applied to the determination of silver in real samples such as Nano Silver and semi-conductor thin films.     

Molybdic Acid-Catalysed Isomerization of D-Ribulose and D-Xylulose to the Corresponding 2-C-(Hydroxymethyl)-D-Tetroses

ABSTRACT

2-C-(Hydroxymethyl)-D-erythrose (2) and 2-C-(hydroxymethyl)-D-threose (4) have been stereospecifically synthesized in one-step by a molybdic acid-catalysed isomerization reaction from respective D-xylulose (1) and D-ribulose (3). In the case of interconversion of 1 to 2, the content of the 2-C-branched chain tetrose in the equilibrium mixture can be doubled if boric acid is present in the reaction mixture in addition to the catalyst.     

Isolation of polyphenol compounds from olive waste and inhibition of their derivatives for α-glucosidase and α-amylase

Abstract

Olive waste was used as a sustainable resource because it contained a variety of valuable compounds. The polyphenols active fraction from enrichment by microporous resin and extraction with ethyl acetate were analysed by different chromatographic methods. A total of 14 polyphenolic compounds were isolated and identified by structure elucidation. Based on the above obtained compounds, tyrosol was selected as a characteristic polyphenol and participated in transesterification reaction to synthesise β-ketoester using Yb(OTf)₃. Then the Biginelli reaction with benzaldehyde, urea and ketoester (1:1.2:1.2) was performed at 90?°C for 3.0?h under the acidic condition. In addition, the β-ketoester prepared using tyrosol with benzyl had a greater inhibitory effect on α-glucosidase and α-amylase, and the inhibition of enzyme activity for 3, 4-dihydropyrimidinone derivatives prepared using abovementioned β-ketoester was improved significantly. Meanwhile, fluorine-containing dihydropyrimidinone derivatives were considerable inhibitors for both enzymes.     

Isolation of Lipophilic Persistent Organic Pollutants From Human Breast Milk

Background: Lipid removal from biological samples can be achieved by addition of concentrated sulfuric acid. However, certain persistent organic pollutants (POPs) such as chlorophenols are decomposed by sulfuric acid treatment and, thus, a more gentle lipid reduction method is needed for extraction of many environmental contaminants from biological samples. Membrane dialysis extraction (MDE) is a non-disruptive method to extract POPs from biological matrices.

Methods: Human breast milk samples were spiked with radiolabelled p,p′-dichlorodiphenyl trichloroethane ([C-14]-DDT) as a POP proxy and extracted using solid phase extraction (SPE). The extracts obtained were dialyzed by MDE in low-density polyethylene tubings containing a mixture of n-hexane and dichloromethane for 24 h, 48 h, or 72 h.

Results: The lipid content was reduced by 86.2% after one dialysis cycle of 24 h using MDE, and 87.1% recovery of the [C-14]-DDT standard was obtained. The DDT recovery could be further increased up to 96.3% and 98.1% by repeating the dialyses for one or two more cycles, respectively. However, the increased [C-14]-DDT recovery includes a concomitant increase in lipid carryover from 13.8% with one dialysis cycle to 22.1% with three cycles.

Conclusion: An SPE procedure for extracting POPs from breast milk and dialytic conditions for isolation of the extracted POP with minimal lipid carryover was established. The method is nondestructive and acceptable recoveries can be obtained within a single solvent shift as demonstrated by spiking standards. The lipid carryover was minimized, and the method may be considered for lipid removal before HPLC or GC analysis of environmental contaminants.     

Regio‐selective peroxybromination of poly(vinyl methyl ketone) as versatile tool for generation active ATRP initiation sites on solid surfaces

Peroxybromination or so‐called radical bromination is an environmentally friendly process which involves the use of in situ generated bromine by action of hydrogen peroxide on sodium or ammonium bromide in acid medium. The reaction takes place at room temperature without eliminating hydrobromic acid and no needs the use of elemental bromine. The reaction with poly(vinyl methyl ketone) in biphasic system was demonstrated to result in quantitative bromination exclusively at the methyne carbon of the polymer. The brominated polymer was successfully used as multifunctional macroinitiator for atom transfer radical polymerization (ATRP) of styrene and MMA to give bottlebrush polymers, as evidenced by ¹H NMR and GPC. This strategy was demonstrated to provide a means of easy bromination of solid polystyrene microspheres (210–420 μm) constituting with vinyl methyl ketone copolymer segments. Bromoalkyl groups generated (1.3 mmol g^?1) in aqueous mixture were used for surface initiated ATRP of glycidyl methacrylate and styrene monomers to give dense graft chains tethered to the surfaces with hydrolysis‐proof linkages. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3892–3900     

Three‐phase hollow‐fiber liquid‐phase microextraction based on deep eutectic solvent as acceptor phase for extraction and preconcentration of main active compounds in a traditional Chinese medicinal formula

A three‐phase hollow‐fiber liquid‐phase microextraction based on deep eutectic solvent as acceptor phase was developed and coupled with high‐performance capillary electrophoresis for the simultaneous extraction, enrichment, and determination of main active compounds (hesperidin, honokiol, shikonin, magnolol, emodin, and β,β′‐dimethylacrylshikonin) in a traditional Chinese medicinal formula. In this procedure, two hollow fibers, impregnated with n‐heptanol/n‐nonanol (7:3, v/v) mixture in wall pores as the extraction phase and a combination (9:1, v/v) of methyltrioctylammonium chloride/glycerol (1:3, n/n) and methanol in lumen as the acceptor phase, were immersed in the aqueous sample phase. The target analytes in the sample solution were first extracted through the organic phase, and further back‐extracted to the acceptor phase during the stirring process. Important extraction parameters such as types and composition of extraction solvent and deep eutectic solvent, sample phase pH, stirring rate, and extraction time were investigated and optimized. Under the optimal conditions, detection limits were 0.3–0.8 ng/mL with enrichment factors of 6–114 for the analytes and linearities of 0.001–13 μg/mL (r² ≥ 0.9901). The developed method was successfully applied to the simultaneous extraction and concentration of the main active compounds in a formula of Zi‐Cao‐Cheng‐Qi decoction with the major advantages of convenience, effectiveness, and environmentally friendliness.