Basicity and structure of α, β -unsaturated heterocyclic ketones

The protolytic equilibrium constants of chalcone and its furan and thiophene analogs have been measured spectrophotometrically in sulfuric acid — glacial acetic acid solution. It is shown that the furan ketones are more basic than the thiophene ones, basicity depending on the position of the carbonyl group in the conjugated chain. In the systems studied, 2-furyl exhibits an appreciably greater positive dynamical conjugation effect than 2-thienyl, but as compared with the latter it gives rise to less steric hindrance to solvation of carbonium ions.For Part II see [2].     

Reactions of aromatic and heteroaromatic compounds bearing electron-acceptor substituents

Complexing with aluminum chloride can change the specificity of the bromination of furfural in such a way that the major product becomes 4-bromofurfural. Consequently, as in the thiophene series, reinforcement of the electron-acceptor capacity of the carbonyl group by means of the complexing deactivates the free 5 position so much that the 4 position of the furan ring becomes the most active.See [1] for communication X.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 597–600, May, 1972.     

Ab Initio studies on the rotational equilibria of 2-substituted furan and thiophene carbonyl derivatives

Summary The relative stabilities of syn- and anti-isomers of 2-substituted furan and thiophene carbonyl derivatives are investigated by theab initio MO method. The energy differences between the rotamers are 1–3 kcal mol^–1 but the barriers to rotation are ca. 10 kcal mol^–1 so that free rotational mode is predicted to be a rather difficult process. Application of the self-consistent reaction field (SCRF) method to account for the solvent effect indicates that the isomer with a higher dipole moment (syn) is favored in solution. An electron withdrawing 2-substituent favors syn-isomers for furan carbonyls in contrast to thiophene carbonyls for which anti-isomers are favored. These trends are ascribable to a decrease in electrostatic repulsive and attractive interactions, respectively, in the syn forms of furan and thiophene carbonyls. Contribution of non-bonded repulsive interaction in the anti-isomer is important for the relative stability of the syn-isomer of furan carbonyl derivative. Solvent effects due to higher dielectric continuum are small on the absolute values of energy differences but can reverse the order of stability of the two isomers due to a greater stability acquired by an isomer (syn) with higher dipole moment in solution. The major factor determining stability, or instability, of syn-isomer is a repulsive electrostatic interaction between the two oxygen atoms for furan carbonyls and an attractive electrostatic interaction between the sulfur and oxygen atoms for thiophene carbonyls.     

Efficient Synthetic Approach to Substituted Benzo[b]furans and Benzo[b]thiophenes by Iodine‐Promoted Cyclization of Enaminones

An efficient synthetic approach to the substituted benzo[b]furan and benzo[b]thiophene scaffolds by iodine‐mediated cyclization of the corresponding enaminones is described. This protocol was applied to a large series of these latter precursors to afford the respective benzoheterocycles substituted at the C‐2 position by a carbonyl group functionality. A study of the factors that control this process reveals that the reactivity depends on the presence of electron‐donor groups in the aryl ring of the aryloxycarbonylic and arylthiocarbonylic moieties.     

Efficient Synthesis of Alkyl End‐Capped Oligoheterocycles via the Use of Palladacycle Catalyst

The preparation of mixed thiophene/furan oligomers with alkyl groups at α,α′‐position by the method which we discovered recently in our lab is presented. Thus, the mixed thiophene/furan oligomers can be prepared in good yields from monoiodoarene in the presence of 5 mol % of palladacycle catalyst and 1.2 equiv of N,N‐diisopropylethylamine in DMF at 100°C for 8 h.     

Lewis acid induced [4+3] cycloadditions of 2-silyloxyacroleins. Insights on the mechanism from a DFT analysis

The mechanism for the Lewis acid induced [4+3] cycloadditions of 2-(trimethylsilyloxy)acrolein with furan has been examined here through DFT calculations at B3LYP/6-31G* level. The mechanism is a three-step process initialized by the nucleophilic attack of furan to the β-conjugated position of acrolein yielding a zwitterionic intermediate. The key step on the formation of the seven-membered ring is the electrophilic attack of the furan residue to the carbonyl carbon in this intermediate. The endo selectivity experimentally observed is reproduced by the calculations.     

Catalytic reductive debromination — A new method for the preparation of deutero-substituted thiophenes and furans

The principles of the reductive dehalogenation of a number of mono- and dibromosubstituted functional derivatives of thiophene and furan in the presence of a palladium complex applied to silica gel modified with -aminopropyl groups were investigated. A one-step method for the preparation of mono- and dideutero-substituted carbonyl compounds of the furan and thiophene series was developed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 176–180, February, 1982.     

PMR spectra of certain chalcones and their heterocyclic analogs

The PMR spectra of chalcone and some of its derivatives and heterocyclic analogs have been measured, the signals have been assigned to certain atomic groupings and the trans configuration of the molecules has been established. We show that the conductivity of the electronic effects increases from the furan ring to the thiophene and selenophene rings. The effect of a carbonyl group in heteroaromatic systems on the proton signals from a methyl group in the side chain is markedly less than it is on the proton signals from the ring.     

Conformational preferences and electronic effects in selenophene and tellurophene carbonyl derivatives investigated by lanthanide induced shifts

Computer simulation of the lanthanide induced shifts has been applied to study of the conformational preferences in the 2-formyl and 2-acetyl derivatives of furan, thiophene, selenophene and tellurophene. The results assign a nearly equipopulated mixture of s-cis and s-trans conformers to the furan, and a preponderance of the s-trans form to the thiophene, selenophene and tellurophene derivatives. This difference is interpreted as due to the interaction between the heteroatom and carbonyl oxygen lone pairs. The 2-N,N-dimethylcarboxyamide derivatives of furan, thiophene and selenophene are found to exist mainly in a quasi-planar s-cis form. The barriers to the rotation about the amide bond in these amides have been measured and related to the electronegativity of the heteroatom.     

Synthesis of methyl-substituted benzofuro-, benzothieno-, and benzoselenopheno[2,3-b] pyridines

Three-ring benzo[b]furan, benzo[b]selenophene, and benzo [b]thiophene systems condensed with a pyridine ring and having a methyl group in the γ position of the pyridine ring were synthesized.     

Reaction between Furan‐ or Thiophene‐2‐carbonyl Chloride,Isocyanides, and Dialkyl Acetylenedicarboxy­lates: Multicomponent Synthesis of 2,2′‐Bifurans and 2‐(Thiophen‐2‐yl)furans

An efficient multi‐component synthesis of highly functionalized 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans is described. A mixture of furan‐ or thiophene‐2‐carbonyl chloride, an isocyanide, and a dialkyl acetylenedicarboxylate undergoes a smooth addition reaction in dry CH₂Cl₂ at ambient temperature to produce 2‐amino‐5‐(4‐chlorofuran‐2‐yl)furan‐3,4‐dicarboxylates and 2‐amino‐5‐(4‐chlorothiophen‐2‐yl)furan‐3,4‐dicarboxylates. A single‐crystal X‐ray‐analysis of a derivative conclusively confirms the structure of these 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans. A novel electrophilic aromatic substitution reaction can justify the formation of the Cl‐substituted furan or thiophene rings.     

Condensed Pyridine Bases. Synthesis and Reactions of Benzofuro[2,3-c]indeno[2,1-e]-, Benzothieno[2,3-c]Indeno[2,1-e]-, Benzofuro-[3,2-c]Indeno[2,1-e]- and Thieno[2,3:4′,5′]-thieno[3,2-c]indeno[2,1-e]pyridines

Condensation of hetarene carboxaldehydes with phthalide gave 2-(3-hydroxy-1-oxoinden-2-yl)benzo[b]furan and 2-(3-hydroxy-1-oxoinden-2-yl)-5-ethylthieno[2,3-b]thiophene. Starting from hetaryl acetic acids gave 3-(3-hydroxy-1-oxoinden-2-yl)benzo[b]furan and 3-(3-hydroxy-1-oxoinden-2-yl)benzo[b]thiophene. Acylation of 3-hydroxy-1-oxoinden-2-yl-substituted heterocycles using acetic anhydride in the presence of 70% HClO₄ leads to the formation of pentacyclic pyrilium salts. Pentacyclic indenopyridines are prepared by treating the pyrilium salts with ammonia. The reaction of the carbonyl group in the indenopyridines with hydroxylamine, hydrazine hydrate, and in reduction using NaBH₄ has been studied.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 435–443, March, 2005.     

Reactions of furan derivatives with aliphatic carbonyl compounds in acid medium

Sixteen new derivatives of the furan and of the 1,1-difurylmethane series were synthesized by the reactions of furan, 2-methylfuran, 2-(3′-acetoxypropyl)furan, 2-(3′-butyl)furan, 1-cyclopropyl-2-αfurylcyclopropane, and 1,1-difurylethane with saturated and α, β-unsaturated aliphatic carbonyl compounds in acid medium.     

Electron-rich heteroaroylphosphonates and their reaction with trimethyl phosphite

Dialkyl heteroaroylphosphonates based on thiophene, pyrrole or furan have been prepared and their reactions with trimethyl phosphite investigated. Deoxygenation of the carbonyl groups in these heteroaroylphosphonates occurs to give carbene intermediates, which then undergo further reaction. In the case of the furan-3-oylphosphonates and those systems containing a thiophene or pyrrole ring, the major reaction pathway involves intermolecular trapping of the carbene intermediates by the trimethyl phosphite, leading to the formation of ylidic phosphonates that can be readily converted into the corresponding 1,1-bisphosphonates. However, in some furan-2-oylphosphonates the carbenes generated undergo ring-opening to initially give acyclic alkynylphosphonates which may react further to give other novel phosphorus compounds. The effects of substituents on the extent to which intermolecular trapping of the initially formed carbene competes with intramolecular rearrangement has been investigated. The latter process appears to be suppressed by a substituent at the 5-position of the furan ring, the resulting ylidic phosphonates being a rare example of an efficient intermolecular trapping of a furan-2-yl carbene.     

Triplet states of furan,thiophene, and pyrrole

Low-lying triplet electronic states have been detected in furan, thiophene, and pyrrole by the method of variable-angle, electron-impact spectroscopy. Singlet → triplet transitions occur with maximum intensity at 3.99 eV and 5.22 eV in furan, 3.75 eV and 4.62 eV in thiophene, and 4.21 eV in pyrrole. A weak transition at 5.22 eV in pyrrole is assigned as the lowest observed singlet → singlet excitation in that molecule.     

The direction of the dipole moments of furan,thiophen, and pyrrole: A controversial question

The report that the dipole moment in the five-membered heterocyclic rings, furan, thiophene, and pyrrole has the positive pole on the heteroatom is contradicted with arguments based on reactivity data, theoretical calculations and moment values of substituted derivatives. In actuality, the dipole moment in furan and thiophene is directed from the ring (positive pole) to the heteroatom (negative pole).     

Synthesis of heteroarylated ketones via bismuth(III) triflate-promoted regioselective 1,4- and 1,6-additions of electron-rich heteroarenes to cyclic enones and dienones

The development and optimization of bismuth(III) triflate-promoted regioselective 1,4- and 1,6-additions of electron-rich heteroarenes to cyclic, β,β-disubstituted enones and dienones is described. Additions of a range of heteroarenes, including furan, thiophene, pyrrole, and indole nucleophiles, to cyclic, β,β-disubstituted enones occur to form all-carbon quaternary centers in up to 88% yield. In addition, regioselective 1,6-additions of electron-rich heteroarenes to 3-vinyl-2-cyclohexenone occur to produce a variety of δ-heteroarylated, β,β-disubstituted enones in up to 93% yield. The high 1,6-selectivity for these reactions is attributed to the increased steric bulk at the β-position relative to the δ-position, and no competing 1,4-conjugate addition is observed.     

Theoretical fine spectroscopy with symmetry-adapted-cluster configuration-interaction method: outer- and inner-valence ionization spectra of furan, pyrrole, and thiophene

Theoretical fine spectroscopy has been performed for the valence ionization spectra of furan, pyrrole, and thiophene with the symmetry-adapted-cluster configuration-interaction general-R method. The present method described that the pi(1) state interacts with the pi(3) (-2)pi*, pi(2) (-2)pi*, and pi(2) (-1)pi(3) (-1)pi* shake-up states providing the split peaks and the outer-valence satellites, both of which are in agreement with the experiments. The intensity distributions were analyzed in detail for the inner-valence region. In particular, for furan, theoretical intensities were successfully compared with the intensity measured by the electron momentum spectroscopy. The interactions of the 3b(2) and 5a(1) states with the shake-up states were remarkable for furan and pyrrole, while the 4b(2) state of thiophene had relatively large intensity.     

One-flask synthesis of mono- and trifunctionalized 21-thia and 21-oxaporphyrin building blocks and their application in the synthesis of covalent and noncovalent unsymmetrical porphyrin arrays

A rapid synthetic route has been developed to synthesize mono- and trifunctionalized 21-thia and 21-oxaporphyrin systems using simple precursors such as 2[alpha-(aryl)-alpha-hydroxymethyl] thiophene (thiophene mono-ol) and 2[alpha-(aryl)-alpha-hydroxymethyl] furan (furan mono-ol), respectively. Condensation of one equivalent of thiophene or furan mono-ol with two equivalents of aryl aldehyde and three equivalents of pyrrole under porphyrin forming conditions followed by column chromatography resulted in functionalized 21-thia or 21-oxaporphyrins. To synthesize monofunctionalized porphyrins, the mono-ol containing the functionalized aryl group was used. The functionalized aldehydes were used to synthesize trifunctionalized porphyrins. The mono-ol method is versatile and applicable to synthesize mono- and trifunctionalized 21-thia and 21-oxaporphyrins containing functional groups such as iodophenyl, ethynylphenyl, hydroxyphenyl, bromophenyl, and pyridyl groups. The monofunctionalized porphyrin building blocks containing iodophenyl and ethynylphenyl groups were used further to synthesize four unsymmetrical covalent porphyrin dimers containing two different porphyrin cores such as N3S-N4, N3O-N4, and N3S-N3O bridged via diaryl ethyne group and one symmetrical phenylethyne bridged dimer containing two N3S cores. A preliminary photophysical study on these dimers indicated a possibility of energy transfer from one subunit to another. We also demonstrated the use of trifunctionalized porphyrins in the synthesis of two noncovalent unsymmetrical porphyrin tetramers containing one N3S and three N4 porphyrin subunits.     

Alkylation of furan,thiophene, and pyrrole with furfuryl alcohol in the presence of the strongly acidic Amberlyst 15 sulfo cation-exchange resin

The corresponding 2-furylhetarylmethanes were obtained by the reaction of furan, thiophene, or pyrrole with furfuryl alcohol in the presence of the strongly acidic Amberlyst 15 cation-exchange resin in the H⁺ form. The alkylation of furan and thiophene takes place regiospecifically in the 2 position, whereas 2-furyl-2-pyrrolyl- and 2-furyl-3-pyrrolylmethane in a ratio of 6.21 are formed in the case of pyrrole.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 746–749, June, 1989.