Improvement of stability of a Fe/Mg/Al2O3 catalyst for the decomposition of methane in the presence of O2/CO2

The stability of an Fe/Al₂O₃ catalyst in the methane decomposition in the presence of O₂/CO₂ was found to be improved by the addition of Mg into the catalyst (Mg/Fe=1/1 wt ratio), probably due to suppression of carbon deposition even under CH₄/ O₂/CO₂ (80/10/5 vol. ratio) conditions. This revised version was published online in June 2006 with corrections to the Cover Date.     

The crystal and molecular structure of tris(ortho-aminobenzoato)aquoyttrium(III), Y(H2NC6H4COO)3 · H2O

Tris(ortho-aminobenzoato)aquoyttrium(III), Y(H₂NC₆H₄COO)₃ · H₂O, crystallizes in the monoclinic space group, $\text{C2}\text{c}$, with eight molecules in a unit cell of dimensions: a = 30.89(1) Å, b = 9.09(1) Å, c = 14.85(1) Å, and β = 109.3(1)°. The structure was determined using three-dimensional X-ray diffraction data gathered on multiple-film equi-inclination, integrated Weissenberg, and precession photographs taken about two crystal axes. The structure, excluding the hydrogen atoms, was solved from Patterson and electron density maps and refined by least-squares methods to a final R of 0.081. The coordination about the yttrium atom is sevenfold, best described by a capped trigonal prism. Each ortho-aminobenzoate ligand acts as a bridging bidentate ligand, resulting in six ortho-aminobenzoate residues coupled to each yttrium atom. The water molecule occupies the seventh position. This bonding configuration generates a structure in which each yttrium atom in (100) is attached to two other yttrium atoms via carboxylate bridges to give parallel sets of polymeric chains coincident with (100). It is suggested that this polymeric character accounts for the extreme insolubility of Y(H₂NC₆H₄COO)₃ · H₂O.     

高密度非球形和球形LiNi1/3Mn1/3Co1/3O2的合成和性能比较

利用二次干燥法和共沉淀法分别制备出了非球形的Ni_1/3Co_1/3Mn_1/3OOH前驱体和球形Ni_1/3Co_1/3Mn_1/3(OH)₂前驱体, 并分别和LiNO₃混合烧结合成高密度非球形和球形的锂离子正极材料Li(Ni_1/3Co_1/3Mn_1/3)O₂. XPS分析表明, 二次干燥法制备的非球形Ni_1/3Co_1/3Mn_1/3OOH前驱体其过渡金属Ni, Co和Mn的价态分别是＋2, ＋3和＋4, 而共沉淀法制备的球形Ni_1/3Co_1/3Mn_1/3(OH)₂前驱体其各金属价态为＋2; X射线衍射分析表明, 非球形的Ni_1/3Co_1/3Mn_1/3OOH前驱体比球形的前驱体具有较高的活性, 能够在低温下合成出Li(Ni_1/3Co_1/3Mn_1/3)O₂, 而且制备的产物结晶度高, 具有规整的层状α-NaFeO₂结构, 扫描电镜显示制备的非球形产物颗粒均匀, 颗粒间隙小, 振实密度高达2.95 g•cm^－3, 远高于球形的振实密度2.35 g•cm^－3; 充放电实验表明, 由非球形前驱体制备的Li(Ni_1/3Co_1/3Mn_1/3)O₂其充放电性能和循环性能以及体积比容量均高于球形正极材料.     

废旧锂电池中镍钴锰的回收及正极材料LiCo1/3Ni1/3Mn1/3O2的制备

本文以废旧锂电池为原料,经过解体分选、硫酸浸出、除杂净化等一系列工序,回收得到含镍钴锰的混合溶液,采用氢氧化物共沉淀法制备LiCo1/3Ni1/3Mn1/3O2正极材料。分别采用XRD,TG/DSC,SEM对其进行表征,并通过恒电流充放电测试和循环性能测试对材料的电化学性能进行分析。结果表明,合成得到的LiCo1/3Ni1/3Mn1/3O2正极材料具有典型的层状结构,并呈现球形或类球形的形貌。在0.1C,电压范围为2.75～4.3 V的条件下,经恒流充放电测试,它的首次放电容量为136.5 mAh.g-1,经过30个循环后,放电容量为124.9 mAh.g-1,容量保持率高达91.5%,表现出较优异的电化学性能。     

Adsorption studies of Cd(II) onto Al2O3/Nb2O5 mixed oxide dispersed on silica matrix and its on-line preconcentration and determination by flame atomic absorption spectrometry

The present study describes the adsorption characteristic of Cd(II) onto Nb₂O₅/Al₂O₃ mixed oxide dispersed on silica matrix. The characterization of the adsorbent has been carried out by infrared spectroscopy (IR), scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), energy dispersive X-ray fluorescence analysis (EDXRF) and specific surface area (S_BET). From batch experiments, adsorption kinetic of Cd(II) was described by a pseudo-second-order kinetic model. The Langmuir linear isotherm fitted to the experimental adsorption isotherm very well, and the maximum adsorption capacity was found to be 17.88 mg g⁻¹. Using the effective material, a method for Cd(II) preconcentration at trace level was developed. The method was based on on-line adsorption of Cd(II) onto SiO₂/Al₂O₃/Nb₂O₅ at pH 8.64, in which the quantitative desorption occurs with 1.0 mol L⁻¹ hydrochloric acid towards FAAS detector. The experimental parameters related to the system were studied by means of multivariate analysis, using 2⁴ full factorial design and Doehlert matrix. The effect of SO₄²⁻, Cu²⁺, Zn²⁺ and Ni²⁺ foreign ions showed no interference at 1:100 analyte:interferent proportion. Under the most favorable experimental conditions, the preconcentration system provided a preconcentration factor of 18.4 times, consumption index of 1.08 mL, sample throughput of 14 h⁻¹, concentration efficiency of 4.35 min⁻¹, linear range from 5.0 up to 35.0 μg L⁻¹ and limits of detection and quantification of 0.19 and 0.65 μg L⁻¹ respectively. The feasibility of the proposed method for Cd(II) determination was assessed by analysis of water samples, cigarette sample and certified reference materials TORT-2 (Lobster hepatopancreas) and DOLT-4 (Dogfish liver).     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

The crystallographic and magnetic characteristics of Sr2CrO4 (K2NiF4-type) and Sr10(CrO4)6F2 (apatite-type)

Solid-state reaction between SrCO₃, Cr₂O₃ and SrF₂ has produced the apatite phase Sr₁₀(CrO₄)₆F₂ and Sr₂CrO₄ which adopts the K₂NiF₄-type structure. The reaction outcome was very sensitive to the heating rate with rapid rise times favouring the formation of Sr₂CrO₄, which has been synthesised at ambient pressure for the first time. Powder X-ray diffraction and electron diffraction confirmed that Sr₂CrO₄ adopts a body centred tetragonal cell (space group I4/mmm) with lattice parameters a=3.8357(1) Å and c=12.7169(1) Å, while a combination of neutron and X-ray diffraction verified Sr₁₀(CrO₄)₆F₂ is hexagonal (space group P6₃/m) with lattice parameters a=9.9570(1) Å and c=7.4292(1) Å. X-ray photoelectron spectroscopy and magnetic measurements were used to characterise the oxidation states of chromium contained within these phases.     

Synthesis, structure and properties of new chain cuprates, Na3Cu2O4 and Na8Cu5O10

Na₃Cu₂O₄ and Na₈Cu₅O₁₀ were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN₃ and NaNO₃. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 °C for 2000 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na₃Cu₂O₄: P2₁/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3) Å, β=108.389(1)°, 2516 independent reflections, R₁(all)=0.0813, wR₂ (all)=0.1223; Na₈Cu₅O₁₀: Cm, Z=2, a=8.228(1), b=13.929(2), , β=111.718(2)°, 2949 independent reflections, R₁(all)=0.0349, wR₂ (all)=0.0850), the main feature of both crystal structures are CuO₂ chains built up from planar, edge-sharing CuO₄ squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na₃Cu₂O₄ these ions alternate in the chains, in Na₈Cu₅O₁₀ the periodically repeated part consists of five atoms according to Cu^II-Cu^II-Cu^III-Cu^II-Cu^III. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na₃Cu₂O₄: , , Na₈Cu₅O₁₀: , , magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13 K (Na₃Cu₂O₄) and 24 K (Na₈Cu₅O₁₀).     

层状Li(Ni1/3Co1/3Mn1/3)O2正极材料的合成与电化学性能研究

采用共沉淀-喷雾造粒法制备前驱体, 于750 ℃在空气中煅烧20 h合成出层状Li(Ni_1/3Co_1/3Mn_1/3)O₂正极材料, 并用XRD, SEM, 粒度分析和电性能测试考察了所得材料结构、形貌及电化学性能. 本层状Li(Ni_1/3Co_1/3Mn_1/3)O₂正极材料具有α-NaFeO₂结构, 六方晶系, R3m空间群, 其晶胞参数为a＝0.2865 nm, c＝1.4238 nm. 当材料分别在2.8～4.2, 2.8～4.5 V间进行充放电时, 其首次放电容量分别为173.5和185.4 mAh•g^－1, 首次充放电效率分别为90%和83.8%, 40次循环后容量保持率分别为96%和84%.     

The Catalytic Dehydrogenation of c2h6 to c2h4 under non-Oxidative Conditions over the 6cr/g-al2o3Catalyst

In the present paper, the catalytic dehydrogenation of C₂H₆ to C₂H₄ under non-oxidative conditions was investigated in a fixed-bed micro-reactor under ambient pressure at 823 - 923 K. The 6Cr/g-Al₂O₃ catalyst was found to be the best catalyst among the g-Al₂O₃, SiO₂, MCM41, MgO and Si-2 supported chromium oxide catalysts. The features of the 6Cr/g-Al₂O₃ catalyst for the reaction could be listed as follows: (1) At 823 - 923 K, the C₂H₄ selectivity of 92.5-78.6% at a C₂H₆ conversion of 9.5-29.8% could be obtained. (2) The catalyst had the good regeneration performance, i.e., could be regenerated by air repeatedly. (3) The main products were C₂H₄, CH₄, H₂ and coke. No carbon oxides were identified.     

Origin of the irreversible plateau (4.5 V) of Li[Li0.182Ni0.182Co0.091Mn0.545]O2 layered material

Layered LiNi_0.4Co_0.2Mn_0.4O₂, Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂, Li[Li_1/3Mn_2/3]O₂ powder materials were prepared by rheological phase method. XRD characterization shows that these samples all have analogous structure to LiCoO₂. Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ can be considered to be the solid solution of LiNi_0.4Co_0.2Mn_0.4O₂ and Li[Li_1/3Mn_2/3]O₂. Detailed information from XRD, ex situ XPS measurement and electrochemical analysis of these three materials reveals the origin of the irreversible plateau (4.5 V) of Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ electrode. The irreversible oxidation reaction occurred in the first charging above 4.5 V is ascribed to the contribution of Li[Li_1/3Mn_2/3]O₂ component, which maybe extract Li⁺ from the transition layer in Li[Li_1/3Mn_2/3]O₂ or Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ through oxygen release. This step also activates Mn⁴⁺ of Li[Li_1/3Mn_2/3]O₂ or Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂, it can be reversibly reduced/oxidized between Mn⁴⁺ and Mn³⁺ in the subsequent cycles.     

Synthesis of LiNi1/3Co1/3Mn1/3O2−zFz cathode material from oxalate precursors for lithium ion battery

The layered LiNi_1/3Co_1/3Mn_1/3O_2−zF_z (0 ≤ z ≤ 0.12) cathode materials were synthesized from oxalate precursors by a simple self-propagating solid-state metathesis method with the help of the ball milling and the following calcination. Li(Ac)·2H₂O, Ni(Ac)₂·4H₂O, Co(Ac)₂·4H₂O, Mn(Ac)₂·4H₂O(Ac = acetate), LiF and excess H₂C₂O₄·2H₂O were used as starting materials without any solvent. The structural and electrochemical properties of the prepared LiNi_1/3Co_1/3Mn_1/3O_2−zF_z were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and electrochemical measurements, respectively. The XRD patterns indicate that all samples have a typical hexagonal structure with a space group of . The FESEM images show that the primary particle size of LiNi_1/3Co_1/3Mn_1/3O_2−zF_z gradually increases with increasing fluorine content. Though the fluorine-substituted LiNi_1/3Co_1/3Mn_1/3O_2−zF_z have lower initial discharge capacities, a small amount of fluorine-substituted LiNi_1/3Co_1/3Mn_1/3O_2−zF_z (z = 0.04 and 0.08) exhibit excellent cycling stability and rate capability compared to fluorine-free LiNi_1/3Co_1/3Mn_1/3O₂.     

氨蒸发诱导法制备纳米结构LiNi1/3Co1/3Mn1/3O2及其作为高功率型锂离子电池正极材料的性能

采用氨蒸发诱导法成功制备出纳米结构LiNi_1/3Co_1/3Mn_1/3O₂正极材料,借助X射线衍射（XRD）分析、扫描电镜（SEM）、透射电镜（TEM）、高分辨率透射电镜（HRTEM）、能量分散谱（EDS）和比表面测试等表征手段及恒电流充放电测试研究了其晶体结构、微观形貌和电化学性能. 研究表明该方法制备出的材料具有良好的α-NaFeO₂层状结构,阳离子混排程度低. 纳米片交错堆积而成核桃仁状形貌,片与片之间形成许多纳米孔,而且纳米片的侧面属于{010}活性面,能够提供较多的锂离子的脱嵌通道. 在室温下及3.0-4.6 V充放电范围内,该材料在电流密度为0.5C、1C、3C、5C和10C时放电比容量分别为172.90、153.95、147.09、142.16 和131.23mAh·g^-1. 说明其具有优异的电化学性能,非常有潜力用于动力汽车等高功率密度锂离子电池中.     

Temperature-programmed desorption/pulse surface reaction (tpd/tpsr) studies of CH4, C2H6, C2H4, and CO over a cobalt/MWNTs catalyst

Summary Temperature-programmed desorption (TPD) of CH₄, C₂H₆, C₂H₄, and CO and temperature-programmed pulse surface reactions (TPSR) of CH₄, C₂H₆, C₂H₄, CO, and CO/H₂ over a Co/MWNTs catalyst have been investigated. The TPD results indicated that CH₄ and C₂H₆ mainly exist as physisorbed species on the Co/MWNTs catalyst surface, whilst C₂H₄ and CO exist as both physisorbed and chemisorbed species. The TPSR results indicated that CH₄ and C₂H₆ do not undergo reaction between room temperature and 450^oC. Pulsed C₂H₄ can be transformed into CH₄ at 400 ^oC whilst pulsed CO can be transformed into CO₂ at 100 or 150^oC. In gaseous mixtures of CO and H₂ containing excess CO, the products of pulsed reaction were CH₃CHO and CH₃OH. When the ratio of CO and H₂ was 1:2, pulsed CO and H₂ were transformed into CH₃CHO, CH₃OH and CH₄. In H₂ gas flow, pulsed CO was transformed into a mixture of CH₃CHO and CH₄ between 200 and 250^oC and was transformed into CH₄ only above 250^oC.     

Synthesis, structure and magnetic properties of Na6Co2O6

Na₆Co₂O₆ was synthesized via the azide/nitrate route by reaction between NaN₃, NaNO₃ and Co₃O₄. Stoichiometric mixtures of the starting materials were heated in a special regime up to 500°C and annealed at this temperature for 50 h in silver crucibles. Single crystals have been grown by subsequent annealing of the reaction product at 500°C for 500 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structure (, Z=1, a=5.7345(3), b=5.8903(3), c=6.3503(3) Å, α=64.538(2), β=89.279(2), γ=85.233(2)°, 1006 independent reflections, R₁=8.34% (all data)), cobalt is tetrahedrally coordinated by oxygen. Each two CoO₄ tetrahedra are linked through a common edge forming Co₂O₆^6- anions. Cobalt ions within the dimers, being in a high spin state (S=2), are ferromagnetically coupled (J=17 cm^-1). An intercluster spin exchange (zJ′=−4.8 cm^-1) plays a significant role below 150 K and leads to an antiferromagnetically ordered state below 30 K. Heat capacity exhibits a λ-type anomaly at this temperature and yields a value of 19.5 J/mol K for the transition entropy, which is in good agreement with the theoretical value calculated for the ordering of the ferromagnetic-coupled dimers. In order to construct a model for the spin interactions in Na₆Co₂O₆, the magnetic properties of Na₅CoO₄ have been measured. This compound features isolated CoO₄ tetrahedra and shows a Curie-Weiss behavior (μ=5.14 μ_B, Θ=−20 K) down to 15 K. An antiferromagmetic ordering is observed in this compound below 10 K.     

Syntheses, crystal structures, and properties of three new metal selenites Na2Co2(SeO3)3, Na2Co1.67Ni0.33(SeO3)3, and Na2Ni2(SeO3)3

Three new sodium cobalt (nickel) selenite compounds, namely, Na₂Co₂(SeO₃)₃, Na₂Co_1.67Ni_0.33(SeO₃)₃, and Na₂Ni₂(SeO₃)₃ have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO₃] pillared by the [SeO₃]²⁻ groups. The two different types of Na⁺ ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds.     

Hydrothermal synthesis and crystal structure of a new inorganic/organic hybrid of scandium sulfate: (H2en)Sc2(SO4)4·(H2O)0.72

The first organically templated layered structure of scandium sulfate, (H₂en)Sc₂(SO₄)₄·(H₂O)_0.72, (en=ethylenediamine) was synthesized by a hydrothermal method and characterized by single crystal X-ray diffraction. In the title compound, scandium ions are bridged by sulfate groups with a ratio of 1:2 into a 4₃⁶ layer structure. These layers are parallel packed and separated from each other by ethylenediammonium dications and water molecules. The title compound crystallizes in the monoclinic space group P2/c, with cell parameters , , , β=91.210(3)°, and Z=2. Refinement gave R₁[I>2σ(I)]=0.0354 and wR₂[I>2σ(I)]=0.0878. Thermogravimetric analysis indicates that this material is thermally stable to above 400 °C.     

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH CpCH2CH2CH=CH2)2MCl2(M=Zr,Hf)AND Cp2ZrCl2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ~(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.     

Synthesis, spectroscopic studies and crystal structure of a polyoxoanion cluster incorporating para-bromophenylimido ligand, (Bu4N)2[Mo6O18(NC6H4Br-p)]

An organic-inorganic hybrid compound, (Bu₄N)₂[Mo₆O₁₈(NAr)] (Ar = p-BrC₆H₄) has been synthesized via the DCC dehydrating protocol of the reaction of [α-Mo₈O₂₆]⁴⁻ with 4-bromoaniline hydrochloride in anhydrous acetonitrile, which has been characterized by UV-Vis spectra, ¹H NMR and single crystal X-ray diffraction study. By comparing the UV-Vis spectra, which were used to monitor the reaction, the optimum preparative condition for this compound was also determined. This compound crystallizes in the monoclinic space group P2₁/n, which is featured in a terminal para-bromophenylimido group linked to an Mo atom of a hexamolybdate cluster by a Mo-N triply bond. In addition, there are π-π dimerization of the neighboring cluster anions though the parallel aromatic rings in their crystals.     

Two-stage catalytic system of Sn/Al2O3 and Pt/Al2O3for NO reduction by propene in lean conditions

The Pt/Al₂O₃, Sn/Al₂O₃catalysts were prepared by the single sol-gel method. The two-stage Sn/Al₂O₃and Pt/Al₂O₃catalyst in series for NO reduction with propene were investigated. The coexistance of water vapor enhanced the activity at medium temperature of 300-400^oC, and the NO conversion was above 50% at 225 to 500^oC even in the presence of water vapor and SO₂. This revised version was published online in August 2006 with corrections to the Cover Date.