Sorption of light fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript> on NORIT-AZO carbon

Sorption of fullerenes C₆₀ and C₇₀ from o-xylene, toluene, and dichlorobenzene solutions on NORIT-AZO carbons was studied.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1638–1642.Original Russian Text Copyright © 2004 by Semenov, Seregin, Arapov, Charykov.     

Benzene Adsorption on C<Subscript>24</Subscript>, Si@C<Subscript>24</Subscript>, Si-Doped C<Subscript>24</Subscript>, and C<Subscript>20</Subscript> Fullerenes

The absorption feasibility of benzene molecule in the C₂₄, Si@C₂₄, Si-doped C₂₄, and C₂₀ fullerenes has been studied based on calculated electronic properties of these fullerenes using Density functional Theory (DFT). It is found that energy of benzene adsorption on C₂₄, Si@C₂₄, and Si-doped C₂₄ fullerenes were in range of –2.93 and –51.19 kJ/mol with little changes in their electronic structure. The results demonstrated that the C₂₄, Si@C₂₄, and Si-doped C₂₄ fullerenes cannot be employed as a chemical adsorbent or sensor for benzene. Silicon doping cannot significantly modify both the electronic properties and benzene adsorption energy of C₂₄ fullerene. On the other hand, C₂₀ fullerene exhibits a high sensitivity, so that the energy gap of the fullerene is changed almost 89.19% after the adsorption process. We concluded that the C₂₀ fullerene can be employed as a reliable material for benzene detection.     

Electrooptical and Molecular Properties of Fullerene-Containing Poly(Methyl Methacrylates) Prepared by Introducing Fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript> into the Polymer Structure by Different Methods

Poly(methyl methacrylate) samples and their analogs containing covalently bound fullerenes C₆₀ and C₇₀ were prepared under varied synthesis conditions. The molecular weights and the electrooptical characteristics of the polymers in solutions were determined. The influence of the fullerenes on the molecular properties of poly(methyl methacrylate) was elucidated, and the most efficient method of its modification with fullerenes was proposed.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 139–145.Original Russian Text Copyright © 2005 by Evlampieva, Lopatin, Yakimanskii, Nazarova, Melenevskaya, Dmitrieva, Belyaev, Litvinova, Lavrenko.     

Influence of UV Pretreatment on Thermooxidative Degradation of Poly(Methyl Methacrylate) Films with Fullerene C<Subscript>60</Subscript> or C<Subscript>70</Subscript>

Wariation of the concentration of fullerenes C₆₀ and C₇₀ in poly(methyl methacrylate) films under UV exposure in atmospheric oxygen was studied. The mechanism of the influence exerted by addition of some photostabilizing polymers and xanthene dyes on the photooxidative degradation of fullerene in the polymer matrix was analyzed.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 6, 2005, pp. 1038–1042.Original Russian Text Copyright © 2005 by Troitskii, Khokhlova, Konev, Denisova, Novikova, Lopatin.     

Synthesis and structures of C<Subscript>60</Subscript> fullerene chlorides

Systematic study of chlorination of fullerene C₆₀ with inorganic chlorides SbCl₅, VCl₄, MoCl₅, and KICl₄ was carried out. Higher chlorofullerenes, viz., T _h -C₆₀Cl₂₄, C₆₀Cl₂₈, C ₂-C₆₀Cl₃₀, and D _3d -C₆₀Cl₃₀, can be prepared depending on the temperature and time of chlorination. The molecular and crystal structures of C₆₀Cl₂₄⋅VOCl₃, C₆₀Cl₃₀⋅2CS₂, and C₆₀Cl₃₀O_1.22 were determined by single-crystal X-ray diffraction. Fullerenes C₆₀Cl₂₈ and C ₂-C₆₀Cl₃₀ were shown to be only kinetically stable, whereas D _3d -C₆₀Cl₃₀ is a thermodynamically stable product. Transformations of less chlorinated fullerenes into more chlorinated products are accompanied by substantial changes in the addition patterns. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1608–1618, July, 2005.     

An <Emphasis Type="Italic">ab initio </Emphasis> Quantum-Chemical Study of C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CH<Subscript>3</Subscript> and C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CF<Subscript>3</Subscript>

The potential functions of internal rotation around the C -S bond in the C₆H₅S(O)CH₃ and C₆H₅S(O)CF₃ molecules were obtained by ab initio MP2(full)/6-31+G* calculations. The stationary points were identified by solving the vibrational problems. The structures in which the plane of the C -S-C bonds is approximately perpendicular to the benzene ring plane correspond to the energy minimum. The barriers to rotation around the C -S bond, corrected for the zero-point vibration energy, are 21.29 [C₆H₅S(O)CH₃] and 28.98 [C₆H₅S(O)CF₃] kJ mol⁻¹. The bond angles (deg) are as follows: 95.7 (CSC), 107.1 (C SO), 106.3 (C SO) in C₆H₅S(O)CH₃; 93.5 (CSC), 108.2 (C SO), 105.2 (C SO) in C₆H₅S(O)CF₃. The bond lengths are as follows (Å): 1.520 (S=O), 1.804 (C -S), 1.810 (C -S) in C₆H₅S(O)CH₃; 1.507 (S=O), 1.799 (C -S), 1.870 (C -S) in C₆H₅S(O)CF₃. According to the results of NBO calculations, the formally double S=O bond consists of a strongly polarized covalent σ bond (S→O) and an almost ionic bond. An increase in the S=O bond multiplicity relative to a single bond is mainly due to hyperconjugation by the mechanism n(O)→σ*(C -S) and n(O)→σ*(C -S) and, to a lesser extent, by interaction of the oxygen lone electron pairs with the Rydberg orbitals of the S atoms, characterized by a large contribution of the d component.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 96–104.Original Russian Text Copyright © 2005 by Bzhezovskii, Il’chenko, Chura, Gorb, Yagupol’skii.     

Electroactive Polymerization Behaviors of Fused-Pentagon Chlorofullerenes: <Superscript>#1809</Superscript>C<Subscript>60</Subscript>Cl<Subscript>8</Subscript> and <Superscript>#271</Superscript>C<Subscript>50</Subscript>Cl<Subscript>10</Subscript>

The fullerenes that violate isolated pentagon rule (IPR) have unusual electronic properties resulting from their fused-pentagon structures. Numerous non-IPR fullerenes have now been captured by chlorination, affording opportunity to go insight into the properties involved in non-IPR fullerenes in the forms of chlorofullerenes (CFs). Here cyclic voltammetry (CV) is employed to probe the electrochemical properties of non-IPR ^#1809C₆₀Cl₈ in comparison with those of ^#271C₅₀Cl₁₀. Differing from IPR-satisfying CFs such as C₆₀Cl₈ and C₆₀Cl₁₀ (referring to I _h-symmetric C₆₀), the two non-IPR CFs exhibit divergent electroactive polymerization characters. In addition, the electrocatalytic effect of ferrocene that is otherwise employed as internal reference has been shown in the CV process of CFs.     

Synthesis and EPR investigation of nitroxyl derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Nitroxide derivatives of C₆₀ and C₇₀ were obtained by [3+2] cycloaddition of 4-(4-azidophenyl)-2,2,5,5-tetramethyl-3-oxy-2,5-dihydroimidazol-1-oxyl to fullerenes. The products were isolated by TLC and studied by EPR and optical spectroscopy. Molecular rotation of the adducts was shown to slow down on successive addition of the nitroxides, rotational correlation times depending nearly linearly on the number of the nitroxides added. Investigation of photochemical stability of nitroxide derivatives of C₆₀ and C₇₀ in benzene-ethanol medium reveal that the dissolved oxygen quenches efficiently the excitation of nitroxide (λ = 250–400 nm). In the absence of oxygen photoexcitation converts nitroxides to diamagnetic products, presumably, hydroxylamines formed through the interaction with the solvent.     

Solution ozonolysis of C<Subscript>70</Subscript>: stable products and chemiluminescence

For the first time the total and relative contents of the stable ozonolysis products of fullerene C₇₀ solutions were identified by IR spectroscopy and elemental and chemical analyses. At the 100% conversion of C₇₀ a mixture of products corresponding to the empirical formula C₇₀O_14.3H_0.21 (epoxides: polyketones: polyesters: secondary fullerene ozonides (SFOZ): acids = 1.07: 6: 6: 0.21: 1.02) is formed. The content of polyketones, polyesters, acids, and SFOZ increases during the whole ozonolysis time (1 h). The number of oxygen atoms in epoxides C₇₀O _n (n = 1–4) is lower than that in epoxides C₆₀O _n (n = 1–6) formed by the ozonolysis of fullerene C₆₀. The kinetic curve of accumulation of epoxides C₇₀O _n (n = 1–4) passes through a maximum, which is observed 0.5 min after the beginning of ozonolysis. No epoxides were identified among the products 3.5 min after the ozonolysis. The photoluminescence (PL) (λ_max = 645 and 685 nm) of fullerene polyketones in glassy EtO₂/EtOH solutions frozen at 77 K was observed. This PL is much brighter, than that of polyketones formed upon the ozonolysis of fullerenes C₆₀. For the first time the chemiluminescence (CL) was detected and studied upon the ozonolysis of C₇₀ solutions at 300 K. The CL emitters are excited states of fullerene polyketones. The CL spectrum is partially overlapped with the known CL spectrum appeared upon the ozonolysis of C₆₀ (λ_max = 685 nm) but contains the greater number of maxima (λ_max = 645 and 685 nm), which is related to a lower symmetry of the C₇₀ oxidation products.     

Photophysical Investigations on Determination of Ionicity and Electronic Structures for the Non-covalent Complexes of Calix[4]resorcinarene with Fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript> in the Solution State

Ground state non-covalent interactions between a macrocyclic receptor, C-methylcalix[4]resorcinarene (1) and fullerenes (C₆₀ and C₇₀) have been studied in benzonitrile by an absorption spectrophotometric method. Absorption bands are located in the visible region due to the charge transfer (CT) transition between 1 and various electron acceptors (including fullerenes), namely, 2,3-dichloro-5,6-dicyano-p-benzoquinone, tetracyanoquinodimethane and p-chloranil. Utilizing the CT absorption bands, various important physicochemical parameters, including oscillator strength, resonance energy, transition dipole strength of all the acceptor-1 complexes and vertical ionization potential of 1 are determined. Job’s method of continuous variation reveals 1:1 stoichiometry between fullerenes and 1. The most fascinating feature of the present study is that 1 binds selectively to C₇₀ compared to C₆₀ as obtained from binding constant (K) data of C₆₀-1 (K_C60-1K_{\mathrm{C}60\mbox{-}\mathbf{1}}) and C₇₀-1 (K_C70-1K_{\mathrm{C}70\mbox{-}\mathbf{1}}) complexes, i.e., K_C60-1=190K_{\mathrm{C}60\mbox{-}\mathbf{1}}=190 dm³⋅mol⁻¹ and K_C70-1=5,800K_{\mathrm{C}70\mbox{-}\mathbf{1}}=5{,}800 dm³⋅mol⁻¹ and selectivity (K_C70-1 /K_C60-1 ) ∼30. Quantum chemical calculations based on hybrid density functional theory estimate the enthalpies of formation of the fullerene-1 complexes in vacuo and provide very good support for selectivity in the K values of the C₇₀ and C₆₀ complexes of 1. The exchange and correlation energies have been calculated using a hybrid DFT functional method. We have opted to use the hybrid DFT functional over the Hartree-Fock method, as it can account for correlation effects also. Molecular electrostatic potential map calculations give a clear picture on the electronic structures of the fullerene-1 complexes.     

Inertness of C<Subscript>60</Subscript> fullerene toward RO<Subscript>2</Subscript><Superscript>·</Superscript> peroxy radicals

The reactivity of fullerene C₆₀ toward peroxy radicals RO₂ ^· was tested by the chemiluminescence method. A comparison of the influence of C₆₀ and known inhibitors on the kinetics of liquid-phase chemiluminescence (CL) during oxidation of a series of hydrocarbons (ethyl-benzene, cyclohexane, n-dodecane, and oleic acid) shows that the fullerene does not react with the RO₂ ^· radicals. A sharp decrease in the CL intensity observed upon C₆₀ addition is caused by the quenching of CL emitters with fullerene but not by inhibition of hydrocarbon oxidation. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1808–1811, August, 2005.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Self-assembling of fullerene C<Subscript>60</Subscript> into (C<Subscript>60</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clasters in aromatic solvents

Self-assembling of fullerene C₆₀ into (C₆₀) _n clusters in aromatic solvents was studied. The role of the π-π interactions and dispersion forces in the (C₆₀) _n cluster formation in these media is demonstrated using the data on the solubility of fullerene C₆₀ in these solvents and their ionization potentials and also spectral characteristics of fullerene C₆₀ in the range of 326–340 nm in different solvents.     

Electron interactions in the (η<Superscript>2</Superscript>-C<Subscript>60</Subscript>)Pd[P(Ph<Subscript>2</Subscript>)C<Subscript>5</Subscript>H<Subscript>4</Subscript>]<Subscript>2</Subscript>Fe complex

The electronic structure of the (η²-C₆₀)Pd[P(Ph₂)C₅H₄]₂Fe complex was calculated by the “hybrid” B3LYP method. Comparison of the experimental X-ray emission C-Kα spectrum and theoretical spectrum of the compound demonstrated that the electron interactions between the C₆₀ core, palladium atom, and organometallic fragment are described correctly in the framework of the quantum chemical method used. The electronic structure of the organometallic fullerene complex can be presented as a set of blocks of orbitals corresponding to different types of chemical bond. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2640–2644, December, 2005.     

Alkyl (C<Subscript>10</Subscript>, C<Subscript>12</Subscript>, C<Subscript>14</Subscript> and C<Subscript>16</Subscript>) triphenyl phosphonium bromide influenced cloud points of nonionic surfactants (Triton X 100, Brij 56 and Brij 97) and the polymer (Polyvinyl methyl ether)

The clouding points (CP) of the nonionic surfactants p-tert-octyl phenyl polyoxyethylene ether (Triton X 100), Brij-56 and Brij-97, and the water soluble polymer polyvinylmethylether (PVME) have been measured in the presence of the ionic surfactants alkyl (C₁₀, C₁₂, C₁₄ and C₁₆) triphenyl phosphonium bromides (ATPBs). The threshold additive concentrations required for efficient CP enhancement of the systems that were studied have been determined. Considering CP as the threshold state of phase separation, the energetics of the process at different additive concentrations has been evaluated. The spontaneity of free energy of the clouding process (G _c ⁰ ) at the transition concentrations followed the order PVME > TX 100  Bj 56 > Bj 97. The clouding process has been found to be energetically endothermic with fairly large enthalpy and entropy changes that nicely compensate each other. The compensation temperature has been evaluated and compared with different types of the clouding agents.This revised version was published online in January 2005 with corrections to the names of the authors.     

Circular dichroism of optically active organometallic derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Palladium and platinum complexes of fulleienes C₆₀ and C₇₀ containing the axially chiral ligand (—)-BITIANP (BITIANP is 2,2’-bis(diphenylphosphino)-3,3’-bi(benzo[b]thiophene)) and pynolidino[60]fullerene bearing a planar chiral organometallic π-complex substituent in the heteiocyclic ring were studied by circular dichroism (CD) spectroscopy.     

Energetic aspects in description of metal—hydrogen—boron bonds in (B<Subscript>10</Subscript>H<Subscript>14</Subscript>)<Subscript>2</Subscript>Pt and (B<Subscript>8</Subscript>C<Subscript>12</Subscript>H<Subscript>14</Subscript>)<Subscript>2</Subscript>Pt complexes

The energies of formation of platinum complexes with borohydrides B₁₀H₁₄ and B₁₀H ₁₄ ^2- or carboranes B₈C₂H₁₄ and B₈C₂H ₁₄ ^2- were considered in terms of the structure—thermodynamics model. The thermodynamic stability of these complexes was substantiated.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 2, 2005, pp. 149–152. Original Russian Text Copyright © 2005 by Ionov, Kuznetsov.     

Preparation of Aqueous Colloidal Dispersion of C<Subscript>60</Subscript> Fullerene

A method for preparing aqueous colloidal dispersions of C₆₀ fullerene free of organic solvents is proposed. The size of dispersed particles is determined using the turbidity spectra. A solvatochromic effect is observed upon the addition of a C₆₀ solution in toluene to a water-acetone mixture.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 4, 2005, pp. 575–576.Original Russian Text Copyright © 2005 by Tseluikin, Tolstova, Gun’kin, Pankst’yanov.     

The saturated hydrides of C<Subscript>60</Subscript>:F<Subscript>5</Subscript>F<Subscript>6</Subscript> PK F<Subscript>5</Subscript>F<Subscript>7</Subscript> isomers

The carbon cages composed of pentagons and heptagons (F₅F₇ isomers) are the analogs of fullerenes composed of pentagons and hexagons (F₅F₆ isomers). To provide insight into the structures and stability of the hydrides of F₅F₆ and F₅F₇ isomers, systematical density functional theory calculations are performed on all the 1,812 F₅F₆–C₆₀H₆₀ and 56 F₅F₇–C₆₀H₆₀. The calculated results demonstrate that the isomer with lowest/highest energy has most/fewest fused pentagons for both F₅F₆ and F₅F₇ hydrides and the stability of these hydrides increase with the number of fused pentagons roughly. The lowest energy F₅F₆–C₆₀H₆₀ and F₅F₇–C₆₀H₆₀ are 237.1 and 152.5 kcal/mol lower in energy than the isolated pentagon rule (IPR) C₆₀H₆₀, respectively; however, these two parent cages are 529.6 and 660.0 kcal/mol higher in energy than the IPR C₆₀. The calculations suggest that heptagon-containing cages, not only those violating the IPR can be the candidate cages for fullerene derivatives and the possible repulsion between the added atoms may play an important role in determining the structures and stability of the hydrides of carbon cages.     

The solubility of C<Subscript>60</Subscript>Br<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 6, 8, 24) in organic solvents

The polythermal (over the temperature range 20–80°C) solubility of fullerene bromo derivatives C₆₀Brn (n = 6, 8, 24) in several solvents (o-xylene, o-dichlorobenzene, n-decanol-1, and enanthic acid) was studied. The corresponding solubility polytherms are given.