Free volume,glass transition,and degree of branching in metallocene‐based propylene/α‐olefin copolymers: Positron lifetime,density, and differential scanning calorimetric studies

Positron annihilation lifetime spectroscopy (PALS), density, and differential scanning calorimetric (DSC) measurements were used to study systematically the variation of the glass‐transition temperature (T_g) and the size v and number density N_h of local free volumes in n‐alkyl‐branched polypropylenes. The samples were metallocene‐catalyzed propylene copolymers with different α‐olefins (from C₄ to C₁₆) and a different α‐olefin content (between 0 and 20 mol %). From the total specific volume and crystallinity the specific volume of the amorphous phase V_a was estimated and used to calculate the fractional free (hole) volume h and value of N_h. The variations of T_g, v, V_a, h, and N_h were related to the degree (number and length) of branching. T_g decreases and v increases linearly with the number and length of n‐alkyl branches. This behavior was attributed to an increased segmental mobility caused by branching. Both values, T_g and v, follow linear master curves as a function of the degree of branching (DB) if this is defined as the number of all side‐chain carbons with respect to a total of 1000 (main‐chain and side‐chain) carbons. Only propylene/1‐butene copolymers deviated from these relations. A linear relation between v and T_g was also found. The number density of holes was estimated to be N_h = 0.49(±0.07) nm^?3 and N_h′ = 0.58(±0.11) × 10²¹ g^?1, respectively. It shows a slight variation with the DB, which is also seen in the behavior of the specific volume V_a. This variation was explained by the appearance of sterical hindrances resulting from short‐chain branches that may prevent an efficient packing of the chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 434–453, 2002; DOI 10.1002/polb.10108     

Thermal and ion transport properties of hydrophilic and hydrophobic polymerized styrenic imidazolium ionic liquids

Polymerized ionic liquids (PILs) are a platform for fundamental studies of structure‐property relationships in single ion conductors, with potential applications in energy storage and conversion. The synthesis, thermal properties, and ionic conductivities of homologous, narrow dispersity styrenic PILs are described. Hydrophilic poly(4‐vinylbenzyl alkylimidazolium chloride) (PVBn(alkyl)ImCl) homopolymers with constant average degrees of polymerization were synthesized by post‐synthetic functionalization of a poly(4‐vinylbenzyl chloride) (M_n = 15.9 kg/mol, M_w/M_n = 1.34) master batch with N‐alkylimidazoles (alkyl = ? CH₃ (Me), ? C₄H₉ (Bu), and ? C₆H₁₃ (Hex)). The chloride counterions of PVBnHexImCl were exhaustively metathesized with BF, PF, and bis(trifluoromethanesulfonyl)imide (TFSI^?) to yield a series of hydrophobic PILs. Thermogravimetric analyses indicate that PVBn(alkyl)ImCl homopolymers are unstable above 220 °C, whereas the hydrophobic PILs remain stable up to 290 °C. The glass transition temperatures (T_g) decrease with both increasing alkyl side‐chain length and increasing counterion size, exemplified by T_g = 9 °C for PVBnHexImTFSI. Hydrophilic PILs exhibit high ionic conductivities (as high as ～0.10 S cm^?1) that depend on the relative humidity, water uptake, and the PIL side chain length. The hydrophobic PILs exhibit lower conductivities (up to ～5 × 10^?4 S cm^?1) that depend predominantly on the polymer T_g, however, counterion size and symmetry also contribute. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1287–1296, 2011     

Synthesis and characterization of new soluble cardo polyesters derived from 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane with various bisphenols by solution polycondensation

A new cardo diacid chloride, 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane ( 4 ), was synthesized from 1,1‐bis‐[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane in refluxing thionyl chloride. Subsequently, various new polyesters were prepared from 4 with various bisphenols by solution polycondensation in nitrobenzene using pyridine as a hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.50 dL · g^?1. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. These polymers showed glass‐transition temperatures (T_g's) between 144 and 197 °C. The polymer containing the adamantane group exhibited the highest T_g value. The 10% weight loss temperatures of the polyesters, measured by thermogravimetric analysis, were found to be in the range of 426–451 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2951–2956, 2001     

Combined ab initio,electron diffraction,molecular mechanics and vibrational investigations of 1,1 -dimethyl-trans-2-decalone

The conformational behavior of 1,1'dimethyl-trans-2-decalone was studied by combined ab initio, electron diffraction, molecular mechanics and vibrational procedures, and the molecule was found to exist in a distorted all-chair ground state with average C-C, C-H and CO bond distances of r_g = 1.543 Å ± 0.002, r_g = 1.122 Å ± 0.007, and r_g = 1.236 Å ± 0.012, respectively. The ab initio calculations were performed on an STO-3G minimal basis and are indicative of the growing usefulness of quantum-mechanical techniques in the study of medium-sized molecular systems.     

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylate with alkyl acrylates: Facile incorporation of norbornane framework into poly(alkyl acrylate)s

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylates (alkyl = Me 1a , nBu 1b ) with alkyl acrylates (alkyl = ethyl, methyl, and n‐butyl) was investigated. Copolymerization of 1a,b with the alkyl acrylates initiated by 1,1′‐azobis (cyclohexane‐1‐carbonitrile) at 85 °C proceeded to give random copolymers, although the homopolymerization of 1a,b did not proceed efficiently under the same conditions. Typically, bulk copolymerization of 1a with ethyl acrylate in a feed ratio of 1:3 ([ 1a ]:[EA]) afforded a copolymer with M_n = 33,300 containing 19.4 mol % of 1a unit in the composition. An increase of T_g derived from the incorporation of the rigid norbornane framework was observed, although the extent of the temperature rise was rather moderate. The ternary radical copolymerization of 1a,b /alkyl acrylate/N‐phenylmaleimide proceeded to give copolymers with the three repeating units in the main chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4597–4605, 2007     

Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Water-soluble copolymers. IX. Copolymers of acrylamide with N-(1,1-dimethyl-3-oxybutyl)acrylamide and N,N-dimethylacrylamide: Synthesis and characterization

The copolymerizations of acrylamide (AM) with N-(1,1-dimethyl-3-oxybutyl)acrylamide (DAAM) and with N,N-dimethylacrylamide (DMAM) have been studied. The values of r₁,r₂ have been determined to be 0.75 for the AM-DAAM pair and 0.86 for the AM-DMAM pair. The molecular weights of the copolymers were found to decrease with an increase in the feed composition of DAAM or DMAM. The microstructure was predicted for a wide range of feed compositions through a knowledge of reactivity ratios. These model structures are utilized for assessment of structure/dilute solution relationships reported in a subsequent paper in this series.     

Using the reversible addition–fragmentation chain transfer process to synthesize core‐crosslinked micelles

Poly(2‐hydroxyethyl acrylate)–poly(n‐butyl acrylate) block copolymers were synthesized with the reversible addition–fragmentation chain transfer (RAFT) process. The block copolymers were synthesized successfully with either poly(2‐hydroxyethyl acrylate) or poly(n‐butyl acrylate) macro‐RAFT agents. The resulting block copolymers had narrow molecular weight distributions (polydispersity index = 1.3–1.4). Copolymer self‐aggregation in water yielded micelles, with the hydrodynamic diameter (D_h) values of the aggregates dependent on the length of both blocks according to D_h ～ N_BA^1.17N_HEA^0.57, where N_BA is the number of repeating units of n‐butyl acrylate and N_HEA is the number of repeating units of 2‐hydroxyethyl acrylate. The micelles were subsequently stabilized via chain extension of the block copolymer with a crosslinking agent. The successful chain extension in a micellar system was confirmed by an increase in the molecular weight, which was detected with membrane osmometry. The crosslinked particles showed noticeably different aggregation behavior in diverse solvent systems. The uncrosslinked micelles formed by the block copolymer (N_HEA = 260, N_BA = 75) displayed a definite critical micelle concentration at 5.4 × 10^?4 g L^?1 in aqueous solutions. However, upon crosslinking, the critical micelle concentration transition became obscure. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2177–2194, 2006     

Effect of the degree of deacetylation and the substitution of carboxymethyl chitosan on its aggregation behavior

The aggregation behavior of carboxymethyl chitosan (CM‐chitosan) with various degrees of deacetylation (DD) and substitution (DS) was characterized with viscometry, gel permeation chromatography (GPC), and GPC coupled with laser light scattering (GPC‐LLS). The results indicate that CM‐chitosan has a strong tendency to form aggregates in aqueous solution and the aggregation behavior depends on DD and DS values. The apparent aggregation number (N_ap), the gyration radius (R_g), and the weight fraction of the aggregates (F_a) reached maximum at a DD value of 50%, then decreased, with the DD value deviating from 50%. A higher DS value helped to form aggregates; when the DS value increased from 0.65 to above 1.0, N_ap and R_g increased sharply. The dependence of the refractive index increment (dn/dc) on the DD and DS values was related to variation of the charge density and the hydrophobic interaction along the molecular chains. The conformations of CM‐chitosan aggregates were studied by the LLS method. The aggregates showed a spherical shape, and the chain stiffness increased with introduction of the acetyl groups. The DS value had no clear influence on the chain conformation that was observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 296–305, 2005     

Acceleration of the single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride in water at 25 °C

The accelerated single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran (THF) at 25 °C is reported. This process is catalyzed by sodium dithionite (Na₂S₂O₄)‐sodium bicarbonate (NaHCO₃). Electron transfer cocatalysts (ETC) 1,1′‐dialkyl‐4,4′‐bipyridinum dihalides or alkyl viologens were also employed in this polymerization. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight (M_n) = 2,000–12,000, no detectable amounts of structural defects, and both active chloroiodomethyl and inactive chloromethyl chain ends. The molecular weight distribution of PVC obtained is M_w/M_n = 1.5. The surface active agents afford the final polymers as a powder and provide an acceleration of the rate of polymerization. The role of ETC is to accelerate the single electron transfer (SET) step, whereas THF enhances the degenerative chain transfer (DT) step. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6364–6374, 2004     

Water-soluble copolymers. X. Copolymers of acrylamide with N-(1,1-dimethyl-3-oxybutyl)acrylamide and N,N-dimethylacrylamide: Solution properties

Dilute solution properties of copolymers of acrylamide (AM) with N-(1,1-dimethyl-3-oxybutyl)acrylamide (DAAM) and with N,N-dimethylacrylamide (DMAM) have been studied as a function of composition, temperature, time, and added electrolytes sodium chloride and calcium chloride. Unlike the AM-DMAM copolymers, the AM-DAAM copolymers show solution viscosity increases in the presence of added NaCl and CaCl₂ and decreases with increasing temperature which are related to copolymer composition. The unusual viscosity behavior of the DAAM-AM copolymers is suspected to be due to chain extension resulting from intramolecular hydrogen bonding and other cooperative associations along the macromolecular backbone.     

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, C₂₂H₃₈N₄O₄, (I), 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine, C₂₈H₅₀N₄O₄, (II), and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine, C₂₀H₂₄N₆O₈, (III), are the first synthetic meta‐dinitroarenes functionalized with long‐chain aliphatic amine groups to be structurally characterized. The intra‐ and intermolecular interactions in these model compounds provide information that can be used to help understand the physical properties of corresponding polymers with similar functionalities. Compounds (I) and (II) possess near‐mirror symmetry, with the octyl and undecyl chains adopting fully extended anti conformations in the same direction with respect to the ring. Compound (III) rests on a center of inversion that occupies the mid‐point of the central C—C bond of the octyl chain. The middle six C atoms of the chain form an anti arrangement, while the remaining two C atoms take hard turns almost perpendicular to the rest of the chain. All three molecules display intramolecular N—H...O hydrogen bonds between the amine and nitro groups, with the same NH group forming a bifurcated intermolecular hydrogen bond to the nitro O atom of an adjacent molecule. In each case, these interactions link the molecules into one‐dimensional molecular chains. In (I) and (II), these chains pack so that the pendant alkyl groups are interleaved parallel to one another, maximizing nonbonded C—H contacts. In (III), the alkyl groups are more isolated within the molecular chains and the primary nonbonded contacts between the chains appear to involve the nitro groups not involved in the hydrogen bonding.     

Preparation of self-assembled fluorinated molecular aggregates, fluorescein nanocomposites: an extremely enhanced light absorption in nanocomposites

Self-assembled fluorinated molecular aggregates formed by fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers, N,N-dimethylacrylamide oligomers, and acrylic acid oligomers in methanol could selectively recognize fluoresceins as guest molecules to form a new class of fluorinated aggregates-fluorescein nanocomposites. These fluorinated fluorescein nanocomposites that are obtained exhibit an extraordinarily enhanced light absorption (_max ca. 440 nm) compared to that (_maxs 452, 480 nm) of the parent fluorescein in the absence of fluorinated aggregates.     

Novel Copolymers of Difluoro Ring-substituted 2-Phenyl-1,1-dicyanoethylenes with 4-Fluorostyrene: Synthesis,Structure and Dielectric Study

Copolymerization of fluorine ring-substituted 2-phenyl-1,1-dicyanoethenes, RC₆H₃CH?C(CN)₂ (R is 2,3-F,F, 2,4-F,F, 2,5-F,F, 2,6-F,F, and 4-CF₃) with 4-fluorostyrene were prepared in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the copolymers were characterized by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. The monomer reactivity ratios for 4-fluorostyrene (M₁), r₁ = 0.6 and 2-(2,4-difluorophenyl)-1,1-dicyanoethene (M₂), r₂ = 0 were determined from Fineman-Ross plot. The order of relative reactivity (1/r₁) for difluoro-substituted monomers is 2,4-F,F (0.31) > 2,3-F,F (0.25) > 2,5-F,F (0.22) > 2,6-F,F (0.10). DSC curves showed that the copolymers were amorphous with high T _g in comparison with that poly(4-fluorostyrene) indicating a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer units. From the thermogravimetric analysis, the copolymers began to degrade in the range 214–260°C. The copolymer of 4-fluorostyrene and 2-(2,4-difluorophenyl)-1,1-dicyanoethene and poly(4-fluorostyrene) were dielectrically characterized in the range 25–200°C. The dominating relaxation process detected in both materials was the α-relaxation, associated with the dynamic glass transition. The relationship polarity-permittivity was discussed.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

Gas-phase structure and conformational properties of copper (I) pivalate dimer (CuC5H9O2)2

The molecular structure and conformational properties of gaseous dimer of copper (I) pivalate, Cu₂piv₂, have been studied by gas electron diffraction (GED) at 413(5) K and quantum chemical calculations (DFT and MP2). The molecule possesses a planar eight-membered skeleton. Two conformers, “staggered” of C _2h symmetry and “eclipsed” of C _2v symmetry, were found for Cu₂piv₂ in the gas phase. The following geometric parameters of the skeleton ring and the tert-butyl groups have been determined from the GED experiment for the “staggered” form: r_g(Cu···Cu) = 2.520(8) Å, r_g(Cu–O)_ave = 1.871(4) Å, r_g(C–O)_ave = 1.273(3) Å, r_g(C–C)_ring-tert = 1.531(4) Å, r_g(C–C)_{tert-out-of-plane-ring} = 1.536(4) Å, r_g(C–C)_{tert-in-the-plane-ring} = 1.527(4) Å, r_g(C–H)_ave = 1.087(5) Å, (O–Cu–O) = 172.12°(3). Computations predict the internal rotation of the tert-butyl groups to be independent. The value of calculated Wiberg bond index for Cu···Cu testifies the existence of weak bonding between two copper atoms.

     

Diffusion Coefficients for Binary, Ternary, and Polydisperse Solutions from Peak-Width Analysis of Taylor Dispersion Profiles

Binary mutual diffusion coefficients D can be estimated from the width at half height W _1/2 of Taylor dispersion profiles using D=(ln 2)r ² t _R/(3W ² h) and values of the retention time t _R and dispersion tube radius r. The generalized expression D _h=−(ln h)r ² t _R/(3W ² _h ) is derived to evaluate diffusion coefficients from peak widths W _h measured at other fractional heights (e.g., (h = 0.1, 0.2,…,0.9). Tests show that averaging the D _h values from binary profiles gives mutual diffusion coefficients that are as accurate and precise as those obtained by more elaborate nonlinear least-squares analysis. Dispersion profiles for ternary solutions usually consist of two superimposed pseudo-binary profiles. Consequently, D _h values for ternary profiles generally vary with the fractional peak height h. Ternary profiles with constant D _h values can however be constructed by taking appropriate linear combinations of profiles generated using different initial concentration differences. The invariant D _h values and corresponding initial concentration differences give the eigenvalues and eigenvectors for the evaluation of the ternary diffusion coefficient matrix. Dispersion profiles for polymer samples of N i-mers consist of N superimposed pseudo-binary profiles. The edges of these profiles are enriched in the heavier polymers owing to the decrease in polymer diffusion coefficients with increasing polymer molecular weight. The resulting drop in D _h with decreasing fractional peak height provides a signature of the polymer molecular weight distribution. These features are illustrated by measuring the dispersion of mixed polyethylene glycols.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

A one‐dimensional coordination polymer formed from the reaction of 1,1‐diphenyl‐3,3′‐[(1R,2R)‐cyclohexane‐1,2‐diylbis(azanediyl)]dibut‐2‐en‐1‐one with MnCl2·4H2O

In the title coordination polymer, catena‐poly[[dichloridomanganese(II)]‐μ‐1,1‐diphenyl‐3,3′‐[(1R,2R)‐cyclohexane‐1,2‐diylbis(azaniumylylidene)]dibut‐1‐en‐1‐olate‐κ²O:O′], [MnCl₂(C₂₆H₃₀N₂)]_n, synthesized by the reaction of the chiral Schiff base ligand 1,1‐diphenyl‐3,3′‐[(1R,2R)‐cyclohexane‐1,2‐diylbis(azanediyl)]dibut‐2‐en‐1‐one (L) with MnCl₂·4H₂O, the asymmetric unit contains one crystallographically unique Mn^II ion, one unique spacer ligand, L, and two chloride ions. Each Mn^II ion is four‐coordinated in a distorted tetrahedral coordination environment by two O atoms from two L ligands and by two chloride ligands. The Mn^II ions are bridged by L ligands to form a one‐dimensional chain structure along the a axis. The chloride ligands are monodentate (terminal). The ligand is in the zwitterionic enol form and displays intramolecular ionic N⁺—H...O⁻ hydrogen bonding and π–π interactions between pairs of phenyl rings which strengthen the chains.