Determination of arsenic, selenium, and antimony in cloud water by inductively coupled plasma mass spectrometry

The capability of inductively coupled plasma mass spectrometry in determining trace levels of As, Se, and Sb in cloud water was evaluated. Preliminary studies focused on identifying and eliminating potential interferences in the cloud water matrix, the choice of appropriate internal standards, and system optimization. The detection limits for As, Se, and Sb were 20, 100, 20 pg/mL using pneumatic nebulization, and 5, 25, 5 pg/mL, respectively, using ultrasonic nebulization with a precision of better than 5% RSD. The accuracy was demonstrated by the analysis of a NIST commercial reference material, SRM 1643d. In all cases, the results from ICP-MS analysis agreed within 4% of the certified values. Comparative analysis of cloud water samples obtained from a site downwind from large pollution sources (Whiteface Mountain, New York) and Changlagali Pakistan, a rural mountain peak, was carried out by hydride generation atomic absorption (HGAA) spectrometry. There was excellent agreement between the ICP-MS and HGAA results.     

Simultaneous determination of arsenic, selenium and antimony in water by an inductively coupled plasma hydride method

Summary Arsenic, selenium and antimony were determined using on-line hydride generation in conjunction with a simultaneous medium power inductively coupled plasma (ICP) spectrometer with conventional pneumatic nebulization. The sample, acidified with 3 mol/l hydrochloric acid was mixed with 1% (m/v) sodium tetrahydroborate and 5% (m/v) potassium iodide, the mixed stream being pumped to the nebulizer of the ICP spectrometer. Calibration curves were linear up to 1 mg/l analyte, with detection limits of 2; 3 and 3 g/l for arsenic, antimony and selenium, respectively, for 10 s integration times and a sample uptake rate of 2.15 ml/min.     

微波消解-电感耦合等离子体质谱法同时测定化妆品中的汞、铅、砷、锑

采用HNO_3-H_2O_2微波消解样品,电感耦合等离子体质谱法(ICP-MS)同时测定化妆品中的汞、铅、砷、锑.实验中探讨了最佳的消解程序,选择适当的同位素,并用铋、铟、锗做内标元素,有效地抑制了分析信号的漂移.结果表明,各元素的检出限在0.089～0.37μg/kg,相对标准偏差(RSD)在0.709%～2.10%,回收率为80.10%～102.67%.该方法具有简便、快速、准确、灵敏度高的优点,适用于化妆品中的汞、铅、砷、锑元素的同时测定.     

电感耦合等离子体发射光谱法测定粗二氧化碲中 铜、铅、锑、铋、砷和硒

粗二氧化碲作为碲精炼或碲化工产品生产的重要原料,其中共存元素铜、铅、砷、锑、铋、硒含量的准确测定对于生产过程质量控制和贸易结算具有重要意义,但目前没有粗二氧化碲中铜、铅、砷、锑、铋、硒含量检测的标准分析方法。采用王水和饱和氟化氢铵分解试样,在王水和酒石酸介质中,选用Cu 327.393 nm、Pb 220.353 nm、Sb 217.582 nm、Bi 223.061 nm、As 193.696 nm、Se 196.026 nm为分析谱线,采用电感耦合等离子体发射光谱(ICP-AES)法测定粗二氧化碲中铜、铅、锑、铋、砷和硒含量。各元素校准曲线的相关系数均大于0.999;铜、铅、锑、铋、砷和硒的检出限分别为0.0004%、0.0005%、0.0006%、0.0007%、0.0004%和0.0007%,定量检出限分别为0.0012%、0.0016%、0.0020%、0.0025%、0.0013%和0.0025%。按照实验方法测定5个粗二氧化碲样品中铜、铅、锑、铋、砷和硒,测定结果的相对标准偏差(RSD,n=7)为0.79%~4.8%,加标回收率为96.0%~103%。方法简单,精密度和准确度较高,可用于测定粗二氧化碲中铜、铅、砷、锑、铋、硒含量。     

Determination of antimony and tin in tin dioxide whiskers by inductively coupled plasma mass spectrometry

A procedure for the determination of antimony and tin in tin dioxide whiskers, which were grown from a gas phase by the vapor-liquid-solid mechanism, was developed. The problem was difficult because the single whiskers are irregularly small in size and have a small weight (about 10^?5 g). The procedure is based on the decomposition of a solid sample by cementation on zinc followed by the determination of analytes with the use of inductively coupled plasma mass spectrometry. The procedure developed is characterized by the detection limits of antimony of 0.01–0.03 μg/L and an RSD of 10%. An approach was proposed to estimate the antimony content of single whiskers.     

Determination of arsenic species by inductively coupled plasma mass spectrometry with ion chromatography

Five arsenic species, trimethylarsine oxide, dimethylarsenic acid, monomethylarsonic acid, arsenobetaine and sodium arsenite, in urine were analysed by inductively coupled plasma mass spectrometry with ion chromatography (IC ICP MS). Since the toxicities of different arsenic compounds are different, speciation of arsenic compounds is very important in the investigation of metabolisms. In this paper, we applied ion chromatography (IC) as a separation device and inductively coupled plasma mass spectrometry (ICP MS) as a detection device. For separation of the five arsenic compounds, an anion-exchange column and, as mobile phase, tartaric acid were used. The eluent from the IC column was introduced directly into the nebulizer of the ICP MS and analysed at 75 amu. Detection limits were from 4 to 9 pg as arsenic.     

Capabilities of microbore columns coupled to inductively coupled plasma mass spectrometry in speciation of arsenic and selenium

The performance of microHPLC-microconcentric nebulizer-inductively coupled plasma-mass spectrometry (ICP-MS) coupling for the simultaneous determination of As(III), As(V), monomethylarsenic acid (MMA), dimethylarsinic acid (DMA), selenite (SeIV) and selenate (SeVI) in water was evaluated. The accurate reduction of the off-column dead volume, specially the capillary of the micronebulizer, as well as the optimization of chromatographic conditions led to the claimed advantages expected for microbore columns: a significant diminution of sample and solvent consumption without sacrificing sensitivity and the overall resolution in faster analysis time (less than 5 min). Detection limits are in the range 0.03-0.04 microg L(-1) for arsenic species and 0.35 microg L(-1) for selenium species. The developed method was validated by analysing different spiked environmental water samples. Linearity, tested up to 50 microg L(-1), showed correlation coefficients above 0.999 and no matrix effect for high saline water samples. Good accuracy and repeatability was obtained for spiked influent and effluent water treatment plant.     

Determination of copper, molybdenum and selenium in biological reference materials by inductively coupled plasma mass spectrometry

Summary In a contribution to the elemental characterization of 10 new reference materials, Bovine Muscle Powder (136), Corn Starch (162), Hard Red Spring Wheat Flour (165), Soft Winter Wheat Flour (166), Whole Milk Powder (183), Wheat Gluten (184), Corn Bran (186), Durum Wheat Flour (187), Whole Egg Powder (188) and Microcrystalline Cellulose (189), the total concentrations of Cu, Mo and Se were determined by the application of an analytical method based on isotope dilution inductively coupled plasma mass spectrometry. Cu and Mo contents were quantified by measurement of ⁶⁵Cu/⁶³Cu and ⁹⁷Mo/¹⁰⁰Mo isotopic ratios following spiking with ⁶⁵Cu and ⁹⁷Mo and digestion with nitric acid. Selenium was separated as hydrogen selenide from the matrix using sodium borohydride after spiking with ⁸²Se and acid digestion-dry ashing and quantified by measurement of the ⁸²Se/⁷⁸Se isotopic ratio. Comparison of these results with those from a variety of other methods and assessment of the procedures using certified reference materials indicated that the determinations of Cu, Mo and Se were performed without analytical bias.     

固相萃取分离-电感耦合等离子体质谱法测定海产品中的无机砷

分别将N-（β氨乙基）-?-氨丙基三甲氧基硅烷(AEAPTMS)、3-巯丙基三甲氧基硅烷(MPTMS)与四乙氧基硅烷（TEOS)水解共聚,制备氨基\巯基键合的硅胶材料。将此材料作为固相萃取（SPE）小柱的填充材料,建立了固相萃取快速分离富集海产品样品中五价砷As（Ⅴ）和三价砷As（Ⅲ）电感耦合等离子体质谱法（ICP-MS）测定海产品中无机砷的方法。研究了固相萃取小柱对无机砷的吸附原理、性能和洗脱条件,在pH3～4范围内固相萃取小柱材料有良好的选择吸附性,利用2%硝酸可将As（Ⅴ）洗脱,利用2%硝酸+0.1mol/L KIO3可将As（Ⅲ）洗脱。实际样品检测的加标回收率在72～103%之间,方法实现了海产品样品中无机砷形态快速、方便、准确的检测。     

Determination of antimony,arsenic, bismuth and copper by inductively coupled plasma atomic emission spectrometry in the electrorefining of copper

Inductively coupled plasma atomic emissionspectrometry (ICP-AES) has been applied as a rapid and routine method for the analysis of process electrolytes in the electrorefining of copper. Antimony, arsenic, bismuth and copper have been selected as major electrolyte constituents. For these elements profound statistical studies of spectral and interelement effects have been carried out. For As, Bi and Sb two analyte wavelengths have been selected, and for Cu one relatively insensitive analyte line has been chosen due to the high Cu concentration in samples. Best analytical lines were: As at 193.759 nm, Bi at 306.772 nm, Sb at 206.833 nm and Cu at 216.953 nm. Multiple linear regression proved to be very capable in the search of the best analytical wavelength and identifying interfering elements. Using simple acid based standards all elements investigated can be determined separately in complicated matrices with satisfactory results. Differences between true values and measured values can be partly eliminated by appropriate calculational methods.     

电感耦合等离子体原子发射光谱法测定铈矿中微量的砷、锑

采用过氧化钠熔融试样，用盐酸调节试液酸度，对电感耦合等离子体原子发射光谱（ICP－AES）法同时测定铈矿中微量砷和锑进行了研究，考察了铈基体及共存元素，试液酸度及介质等因素对砷和锑的光谱和非光谱影响。     

电感耦合等离子体质谱(ICP-MS)法测定高纯砷中痕量磷和硒

通过对样品前处理方式、内标元素及质量数的选择、仪器检测模式等方面进行优化,采用串联四级杆电感耦合等离子体质谱仪直接测定高纯砷中痕量的磷和硒.实验室使用电子级盐酸、硝酸配制王水直接溶解样品,在不除基体的情况下,以铑作为内标补偿校正砷基体的抑制效应,在调试好的仪器上进行测定磷、硒含量.磷、硒的测定结果相对标准偏差(RSD)...     

高效液相色谱-电感耦合等离子体质谱联用检测食品中的五种硒形态

建立了高效液相色谱-电感耦合等离子体质谱(HPLC-ICP-MS)联用检测硒酸盐(SeVI)、亚硒酸盐(SeIV)、硒代蛋氨酸(SeMet)、硒代胱氨酸(SeCys2)和硒代乙硫氨酸(SeEt)的方法。采用Hamilton PRP X-100色谱柱（250 mm×4.6 mm, 5 μm）,使用5 mmol/L的柠檬酸溶液(pH 4.5)作为流动相,电感耦合等离子体质谱(ICP-MS)检测,在21 min内可以完全分离5种硒形态。各形态硒的线性相关系数均大于0.9995, SeVI、SeIV、SeMet、SeCys2、SeEt的检出限分别为0.4、0.4、5.6、0.9、1.2 μg/L。探讨了不同提取方法的提取效果,鲜蘑菇和猪肉样品加标回收实验表明,对水溶性良好的无机硒和硒代蛋氨酸而言,采用柠檬酸溶液提取的效果非常好,SeIV和SeVI的回收率均在100%左右,SeMet的回收率为85.0%～95.3%;用蛋白酶水解提取,SeCys2和SeEt的回收率为79.9%～91.5%。该方法可完全满足食品中这5种硒形态的准确定量分析。     

Determination of selenium in sediment by isotope-dilution inductively coupled plasma mass spectrometry with an octapole reaction cell

A method is described for determination of selenium in sediment by isotope-dilution inductively coupled plasma mass spectrometry with an octapole reaction cell (ID–ICP–ORCMS). Sediment samples were digested with HNO₃, HClO₄, and HF, and the digestion included an elaborate evaporation process to remove bromine from the digested solution. Simple strong cation-exchange disk filtration was used to remove rare earth elements (REE) from the digested solution, because REE²⁺ seriously interfere with Se isotopes (i.e. ¹⁵⁶Gd²⁺ with ⁷⁸Se⁺, ¹⁶⁰Gd²⁺ with ⁸⁰Se⁺). Addition of acetic acid to the filtrate was examined to improve the sensitivity of ICP–ORCMS measurement of Se⁺ by means of a carbon-enhancement effect. The interfering for selenium isotopes were almost eliminated by use of H₂ as reaction gas. Interference from BrH⁺ formed in the reaction cell was negligible because the Br was removed in the evaporation process. Approximately 99.5% of REE were removed by cation-exchange disk filtration yet more than 99% of Se remained in the filtrate solution. The intensity for Se⁺ was enhanced approximately fourfold by addition of 5% (v/v) of acetic acid whereas that for was barely enhanced. Measured ⁸⁰Se/⁷⁸Se ratios in unspiked digested solutions of the sample were in good agreement with that for an Se standard solution. The analytical results for Se in the certified reference materials MESS-3 and PACS-1 were in good agreement with their certified values, with small uncertainties.      

Determination of selenium species in human urine by high performance liquid chromatography and inductively coupled plasma mass spectrometry

A method developed to determine organic and inorganic selenium species in human urine samples is presented in detail. After a simple sample treatment based on elimination of non-charged organic compounds, selenium species were separated by high performance liquid chromatography (HPLC) on a Spherisorb 5 ODS/AMINO column using two different chromatographic conditions: phosphate buffers at pH 2.8 and 6.0. Detection was carried out using an on-line inductively coupled plasma mass spectrometer (ICP-MS). Trimethylselenonium ion and two unknown selenium species in urine samples were found. Selenium species were shown to have stability problems, with the maximum allowed storage time of 1 week.     

Determination of vanadium by reaction cell inductively coupled plasma mass spectrometry

Recent advances in inductively coupled plasma mass spectrometry (ICP-MS) have included the addition of interference reduction technologies, such as collision and reaction cells, to improve its detection capability for certain elements that suffer from polyatomic interferences. The principle behind reaction cell (RC)-ICP-MS is to remove a particular polyatomic interference by dissociation or formation of a different polyatomic species that no longer interferes with the analyte of interest. However, some interferences cannot be removed by commonly reported reaction gases, such as hydrogen, oxygen, or methane, necessitating using more reactive and hazardous gases, such as ammonia. The current study investigates oxygen as a reaction gas in RC-ICP-MS to specifically react with vanadium analyte ions, rather than the interferents, to produce a polyatomic analyte species and thereby provide a way to analyze for vanadium in complex environmental matrices. The technique has been tested on a series of river water, tap water, and synthetic laboratory samples, and shown to be successful in vanadium analyses in high chloride and sulfate matrices. The zinc isobaric interference on the new vanadium oxide analyte at m/z 67 is also investigated, and can be corrected by using a standard mathematical correction equation. The results of this study further increase the utility of RC-ICP-MS analytical techniques for complex environmental matrices.     

高效液相色谱-电感耦合等离子体质谱联用测定海洋产品中无机砷

采用高效液相色谱( HPLC)和电感耦合等离子体质谱(ICP-MS)联用技术测定了海洋产品中的无机砷.动物性和植物性海洋产品试样经过10％ H3PO溶液(V/V)提取,阴离子交换色谱分离,ICP-MS测定其中As(Ⅲ)和As(Ⅴ)的含量.实验结果表明As(Ⅲ)和As(Ⅴ)的检出限分别为5.0和8.0 μg/kg,线性范...     

Determination of trace elements in granites by inductively coupled plasma mass spectrometry

Proposed is a simple and reliable method for the dissolution of granite and the determination of 38 elements by inductively coupled plasma mass spectrometry. One hundred milligrams of sample are digested with 1 ml of HF and 0.5 ml of HNO(3) in screw top PTFE-lined stainless steel bombs at 190 degrees C for 12 h. Insoluble residues are dissolved using 8 ml of 40% HNO(3) (v/v) heated to 110 degrees C for 3 h. Six granite standard reference materials (GSR-1, JG-2, G-2, NIM-G, SG-3, SG-1a) were studied. Analytical calibration was accomplished using aqueous standard solutions. Rhodium was used as an internal standard to correct for matrix effects and instrument drift. We report data for: Li, Be, Sc, V, Cr, Co, Ni, Cu, Zn, Ga, Rb, Sr, Y, Zr, Nb, Mo, Cs, Ba, Hf, Ta, W, Pb, Th, U and 14 of the rare earth elements. The recoveries for most of these elements in granite ranged from 90 to 110%.     

电感耦合等离子体质谱(ICP-MS)法测定锆钛矿中的铪

锆钛矿组成成分复杂,存在耐高温的锆、钛化合物,不易分解,且铪以类质同象进入锆矿物,导致锆钛矿中的铪含量不均,因此完全分解锆钛矿并准确测定其中含量不同的铪成为一个难题。本文建立了碳酸钠-硼砂高温熔融,以178Hf为分析同位素及50 ng/mL185Re为内标,使用电感耦合等离子体质谱法（ICP-MS）测定锆钛矿中铪的新方法,可准确锆钛矿中含量不均的铪。实验研究了锆钛矿成分及其熔融方法,结果表明碳酸钠-硼砂高温熔融效果最好,可完全溶解耐高温难分解的锆钛矿,当碳酸钠-硼砂质量配比为2:1时熔融效果最佳。电感耦合等离子体质谱法具有检出限低、灵敏度高、线性范围宽等优势,可用于测定锆钛矿中含量不均的铪,ICP-MS蠕动泵转速为45 rpm、雾化流量为1.06 L/min时雾化效率最优。在选定的实验条件下,HfO2质谱强度与其质量浓度在0.01～250 ng/mL范围内呈良好的线性关系,相关系数为0.9997,背景等效浓度为0.029 ng/mL,方法检出限为0.0032 ng/mL。按实验方法对中国国家标准物质中的HfO2进行测定,测定值与认定值一致,相对标准偏差在1.6%~3.2%之间。按实验方法对锆钛矿样品中的HfO2进行测定并进行加标回收率实验,测定结果的相对标准偏差（RSDs,n=9）在0.9～3.4%之间,加标回收率在96%～106%之间,满足国家地质矿产行业标准DZ/T 0130—2006的要求。