Contamination by butyltin compounds in harbour porpoise (Phocoena phocoena) from the Black Sea

Concentrations of butyltin compounds (BTs) were determined in harbour porpoise (Phocoena phocoena) collected from the Turkish coastal waters of the Black Sea. Total butyltin compounds (∑ BTs) in the liver were in the range of 89–219 ng/g on a wet weight basis. The dibutyltin (DBT) residues were higher than those of tributyltin (TBT), suggesting the degradation of TBT to DBT in the liver and the metabolic capacity comparable to other marine mammals. Any sex difference and age-dependent accumulation of BTs residues were not found in harbour porpoises, but residue levels increased until maturity and then remained constant. When compared with other marine mammals, the present results indicate that the Black Sea is also contaminated with butyltin compounds, but to a lesser degree than coastal waters of developed nations. The biomagnification factor in harbour porpoises was 0.8, which was comparable with pinnipeds and lower than cetaceans. Received: 23 December 1996 / Revised: 15 April 1997 / Accepted: 16 April 1997     

Bioaccumulation of Butyltin Compounds in Marine Mammals: The Specific Tissue Distribution and Composition

Although organotins are notorious man-made organometallic species introduced into the aquatic environment, no investigation had been concerned with contamination of higher trophic animals such as marine mammals until the last few years. Our recent work demonstrated the detection of butyltin compounds (BTCs), including mono- (MBT), di-(DBT), and tri-butyltin (TBT) in marine mammals. This paper reviews BTC contamination in higher trophic animals, based on our recent publications. Analysis for BTCs showed significant accumulation in tissues and organs of three finless porpoises ( Neophocaena phocaenoides ) collected from Japanese coastal waters. More than 10 μg of butyltin ions per gram on a wet weight basis were detected in the liver of a porpoise collected in the semi-closed sea. Distribution of BTCs in the tissues and organs of the porpoises showed a similar pattern to several other marine mammal species: higher concentrations in liver and kidney, and lower in muscle and blubber. In addition, tissues and organs from two water birds and one sea turtle species were also analyzed for BTCs, and their concentrations and compositions were compared among the species. The results showed that the distribution of these contaminants extends widely, not only to marine mammals but also to other higher trophic species. On the other hand, the composition of the BTCs exhibited a specific profile in each species. The ratios of hepatic concentrations of DBT or MBT to TBT for marine mammals were relatively lower than those of water birds and the sea turtle, indicating that metabolism and excretion of TBT may be less efficient in the mammalian species. © 1997 by John Wiley & Sons, Ltd.     

Hepatic butyltin concentrations in beluga whales (Delphinapterus leucas) from the St Lawrence Estuary and northern Quebec,Canada

Butyltin (tributyltin TBT; dibutyltin DBT and monobutyltin MBT) speciation was measured in the liver of beluga whales from the St Lawrence Estuary and Hudson Strait (northern Quebec). Using GC–MS, liver samples were analysed from 21 beluga whales found dead, stranded along the shores of the St Lawrence during the period 1995–1998. In all cases, including a neonate specimen, the liver was contaminated with butyltin compounds with concentrations in the range 0.04–2.1 mg Sn kg⁻¹ on a dry weight basis. Liver samples of five beluga whales from Hudson Strait obtained in the summer of 1998 were also analysed. For these animals, hepatic butyltin concentrations were consistently below the detection limit (<0.5 ng Sn g⁻¹ for MBT and <0.2 ng Sn g⁻¹ for DBT and TBT). Compared with published data on the contamination by TBT of the marine mammals of the St Lawrence in 1988, these contemporary results clearly indicate that the level of contamination of the beluga whales in this coastal marine ecosystem has not decreased ten years after regulating the use of TBT‐based antifoulants on small craft. Copyright © 2000 John Wiley & Sons, Ltd.     

Occurrence of butyltin compounds in marine sediments and bivalves from three harbour areas (Saigon,Da Nang and Hai Phong) in Vietnam

A survey of organotin compounds comprising tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediment and clam (Meretrix meretrix) was undertaken in Vietnam in 2003. Samples were collected from dry docks and cargo harbours in Ho Chi Minh (south), Da Nang (centre) and Hai Phong (north) cities. Measurable amounts of TBT, DBT and MBT were found in all samples. The total concentration of the butyltin compounds (ΣBTs) in sediment from shipyards and vessel repair yards (Nam Trieu, Song Cam, Lach Tray and Ba Son) were always higher than those measured in cargo ports (Hai Phong, Da Nang, and Sai Gon). The highest ΣBTs concentration (as tin: 122 ng g^?1 dry wt) was found in the sediment from Song Cam station, where seven shipyards are located. The lowest concentrations of ΣBTs occurred in sediments from the Da Nang and Hai Phong cargo ports (as tin: 21–22 ng g^?1 dry wt). This implies that the major source of BTs in the marine environment in Vietnam is from the shipbuilding activities. The ratio of TBT to Σ(MBT + DBT) in sediment was 0.67 ± 0.03 for all the sampling sites, indicating the recent use of TBT in Vietnam. For the clam (M. meretrix), the concentration of ΣBTs (as tin) varied in the range 11.2–60.1 ng g^?1 wet wt. There was a good correlation (R² = 0.85) between total organic matter‐normalized ΣBTs in sediment and hexane‐extractable organic matter‐normalized ΣBTs in clam soft tissue. The mean biota–sediment accumulation factors (organic carbon/lipid) for MBT, DBT and TBT in clam's soft tissue were found to be 1.83 ± 0.66, 1.44 ± 0.23 and 1.16 ± 0.47 respectively, indicating that sediment‐bound BTs might be an important source of contamination for the clam. Copyright © 2005 John Wiley & Sons, Ltd.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

A study of the partitioning and sorptive behaviour of butyltins in the aquatic environment

This study was designed to investigate the partitioning and sorptive behaviour of tributyltin(TBT), and its degradation products dibutylitin (DBT) and monobutyltin (MBT), in the aquatic environment. Factorial experiments were undertaken to determine the importance of pH and particulate matter concentration in the sorption of butyltin compounds to solid phases. Results indicate that in freshwaters MBT, and to a lesser extent TBT, will be partitioned towards the particulate phase, whereas DBT exhibits a 50:50 partitioning between particulate and solution phases. In estuarine waters, whilst MBT will almost exclusively sorb on to particulates, TBT will be predominantly in the solid-phase fractions but 10–30% may remain in solution. DBT, in contrast, is solubilized in estuarine waters. A more detailed investigation of TBT sorption and particulate matter concentration was undertaken using adsorption isotherms on different sediment types. The results from batch isotherm tests plotted according to the Freundlich adsorption model revealed that TBT adsorption varied with sediment type, increasing in the order sandy-silt < silty-sand < silty-clay. TBT sorption was found to be reversible, indicating that contaminated sediments may release TBT to overlying waters following sediment distrubance. Interstitial water partitioning studies indicate that TBT predominates in the particulate phase with partition coefficients for TBT higher than for DBT and MBT. The TBT partition coefficient in interstitial waters appears to be related to total organic carbon loadings.     

Determination of butyltin compounds in surface sediments from the São Paulo State coast (Brazil) by gas chromatography-pulsed flame photometric detection

Occurrence and the effects of butyltin compounds (BTs) have been studied for some years, mainly in countries of the Northern Hemisphere. Due to widespread use of tributyltin compounds (TBTs) and considering their deleterious effects, it is necessary to conduct studies on its occurrence, especially in the marine environment because of its excessive use in coatings of ship hulls to prevent fouling. Moreover, it was important to extend the evaluation to areas where there is no current information about their occurrence. The present work reports the occurrence of BTs in marine sediments of S?o Paulo state, Brazil. Commercial and leisure harbor sampling sites were selected because these areas are potentially exposed to BTs from antifouling paints used on ship hulls. Analytical conditions for organotin analysis in marine sediments were optimized for GC with pulsed flame photometric detection. Detection limits ranged from 8A to 66.3 ng g(-1) using a 610-nm filter, and the linearity range was 20-500 ng g(-1). Concentration levels of BTs were highest in Santos harbor (360 ng g(-1) TBT in average) and Guarujá marina (670 ng g(-1) TBT in average), which seems to be related to intensive boat traffic. Lower levels of BTs were observed in Cananéia, where only fishing boats are present (50 ng g(-1) TBT in average).     

Interdisciplinary study for the evaluation of biochemical alterations on mussel <Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis> exposed to a tributyltin-polluted area

An interdisciplinary approach was employed to monitor the concentration and the effects of butyltin compounds in mussels (Mytilus galloprovincialis). Tissues from animals exposed to a marine area (Vado Ligure harbour) with a high concentration of tributyltin (TBT) were analysed and compared with control samples. TBT concentrations were measured by gas chromatography–mass spectrometry and the protein pattern in gill tissues was studied by proteomic analysis. Several proteomic signatures associated with contaminant exposure were observed; spots that were significantly increased in all contaminated samples were identified by mass spectrometry as fragments of β-tubulin. The degradation of β-tubulin was then confirmed by western blot analysis with specific anti-β-tubulin antibody. The effects observed on mussel gills after exposure in the TBT-polluted area are discussed.     

Isotope dilution GC-MS routine method for the determination of butyltin compounds in water

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in ¹¹⁹Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L⁻¹ for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L⁻¹, respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.     

Butyltins biomagnification from macroalgae to green sea urchin: a field assessment

Biomagnification of butyltins (BTs) was examined in a simple food web including seawater, macroalgae (Alaria esculenta, Laminaria longicruris, Ulvaria obscura) and green urchin (Strongylocentrotus droebachiensis). The study was conducted in shallow waters of the St Lawrence Estuary (Canada) adjacent to two areas potentially contaminated by BTs. Levels of tri‐ (TBT), di‐ (DBT) and mono‐BT (MBT) were determined in seawater, green urchin (including faecal matter after sampling) and macroalgae surrounding the urchins at each sampling site. The concentrations of TBT in seawater from all stations were relatively low (3–7 ngSn l^?1), and both the TBT and the total BTs (∑BT = MBT + DBT + TBT) concentrations decreased with increase in distance from the BT sources. The concentrations of TBT in algae were 0.35 ngSn g^?1 dry weight (DW) in A. esculenta, 0.40 ngSn g^?1 DW in L. longicruris and 3.58 ngSn g^?1 DW in U. obscura. Following their location, green urchins feeding mainly on these algae accumulated BTs at levels ranging from 4 to 85 ngSn g^?1 DW in gonads and from 35 to 334 ngSn g^?1 DW in gut. The mean bioconcentration factor (BCF) calculated from seawater to algae ranged from 17 in A. esculenta to 151 in U. obscura, whereas the biomagnification factor (BMF) from algae to urchins ranged from 2 to 17 in gonads and from 10 to 67 in gut. The overall bioaccumulation factor of TBT between seawater and internal organs of urchins reached an average value of 1.2 × 10³. These results are the first to illustrate high BT BCFs and BMFs in human‐edible macroalgae and urchins sampled from northern coastal areas with a low TBT contamination level. Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation of a sewage sludge laboratory quality control material for butyltin compounds and their determination by isotope-dilution mass spectrometry

The characterisation of a laboratory quality control material (QCM) for dibutyltin (DBT) and tributyltin (TBT) in sewage sludge is described. The reference values were determined by the use of two different types of isotope-dilution mass spectrometry: gas chromatography–mass spectrometry and gas chromatography–inductively coupled plasma mass spectrometry. To avoid possible analytical errors such as non-quantitative extraction and species degradation during sample preparation, different extraction methods were tested (microwave- and ultrasound-assisted extraction and mechanical stirring). The reference values were based on the unweighted means of results from the homogenisation and characterisation studies. The reference values obtained were 1,553 ± 87 and 534 ± 38 ng Sn g^-1 for DBT and TBT, respectively. In the uncertainty budget estimation, the sample inhomogeneity and between-method imprecision were taken into account. The concentrations of DBT and TBT in QCM are similar to those in the harbour sediment certified reference material PACS-2. Likewise, the levels of DBT and TBT are in the range of these compounds normally present in sewage sludge worldwide. In the future, the QCM will be used for an intercomparison study on DBT and TBT in sewage sludge, and as a day-to-day QCM during studies concerning the application of sewage sludge as an additive to artificial soil or as a raw material in civil engineering construction.     

丁基锡化合物与人血清白蛋白相互作用的研究

通过紫外、荧光和CD光谱, 研究了船体防污漆中主要防污成分——三丁基锡(TBT)化合物及其降解产物——一丁基锡(MBT)和二丁基锡(DBT)与人血清白蛋白(HSA)相互作用的方式与程度, 考察了浓度、酸度、有机溶剂和离子强度等因素对相互作用的影响. 结果表明, 丁基锡与HSA的相互作用是双重的, 既有丁基锡中锡离子与HSA的配位作用, 又有丁基锡中丁基基团的疏水作用, 导致HSA二级结构破坏, α-螺旋结构减少和构象转变. 一般情况下, MBT以配位作用为主, TBT以疏水作用为主, DBT两者兼而有之.     

Voltammetric speciation of butyltin compounds

A sensitive and selective procedure for the determination of tributyltin chloride (TBT), dibutyltin dichloride (DBT) and monobutyltin trichloride (MBT) based on solid phase extraction (SPE) with ENVI-Carb non-porous carbon as column material followed by adsorptive cathodic stripping voltammetry (AdSV) in the presence of tropolone is reported. The determination limits achieved using a 500 mL water sample were 210 ng L^–1 (as Sn) for TBT, 30 ng L^–1 (as Sn) for DBT and 40 ng L^–1 (as Sn) for MBT. The method was used to determine the levels of butyltin species in surface water from the yacht harbour at Zewen on the Mosel River and in the tap water supply in Trier.Dedicated to Professor Dr. K. Doerffel and Professor Dr. H. Kriegsmann on the occasion of their 70th birthdays     

Accumulation of butyltin compounds in dolphins stranded along the Mediterranean coasts

Concentrations of tributyltin (TBT) and its degradation products, monobutyltin (MBT) and dibutyltin (DBT), were determined in the liver and kidney of striped dolphins ( Stenella coeruleoalba), bottlenose dolphins ( Tursiops truncatus) and in a fetus of the common dolphin (Delphinus delphi) found stranded along the western Italian and Greek coasts in the period 1992–1994. Butyltin (BT) compounds were detected in almost all the samples analyzed and were higher in the kidney than in the liver. Total BT concentrations were 0.78–8.05 μg g⁻¹ wet wt in kidney and 0.015–1.02 μg g⁻¹ wet wt in liver of S. coeruloealba. Bottlenose dolphins had lower BT concentrations than striped dolphins. Although only one fetal sample was analyzed, it showed the highest BT concentrations of all. Unlike BT concentrations in the other adult dolphins, in the pregnant dolphin they were higher in the liver (4.35 μg g⁻¹ wet wt), suggesting that BTs are transferred from mother to fetus. No significant differences in BT concentrations were found between sexes. Of the breakdown products, DBT was predominant in most liver samples and MBT was more abundant in kidney. Although BT concentrations are known to be found in cetaceans inhabiting waters of developed countries, our observations strongly suggest that concentrations found in S. coeruleoalba were either similar to or higher than those reported for other Stenella species collected from coastal areas close to harbors or marinas. Copyright © 2000 John Wiley & Sons, Ltd.     

Tributyltin levels in French Mediterranean coastal waters

Tributyltin (TBT) and its degradation products were measured in seawater samples in 1988 and 1989 at different locations of the French Mediterranean coast, including harbours, marinas and mariculture areas. Higher levels of TBT contamination were found in harbour (2–833 ng dm^?3) and marina waters (18–736 ng dm^?3) compared with mariculture areas (<2–111 ng dm^?3). Geographical distribution of TBT degradation products showed that a TBT hot spot finally results in a diffuse contamination of dibutyltin (DBT) and monobutyltin (MBT), even far distant from input areas.     

Determination of butyltin compounds in environmental samples by isotope-dilution GC–ICP–MS

Isotope-dilution analysis in combination with GC-ICP-MS detection has been applied to the determination of butyltin species in environmental samples. Different spikes containing the isotopically labeled butyltin species have been synthesized in the laboratory after optimization of the reaction conditions. The isotopic compositions of the tin species in the different spike solutions were determined by GC-ICP-MS after derivatization by aqueous ethylation with sodium tetraethylborate. Reverse isotope-dilution analysis was used for quantitation of the spike solutions by means of natural MBT, DBT, and TBT standards. The mixed spikes were used for simultaneous analysis of MBT, DBT and TBT in the certified reference materials, PACS-2, CRM 462, and CRM 646, with satisfactory results. The excellent agreement of the different speciation results obtained by use of the different spikes is a good indicator of the precision, accuracy, and reliability which can be achieved by using isotope-dilution analysis for trace metal speciation.Application of a double spike containing (119)Sn-enriched MBT (79.7 At%), (118)Sn-enriched DBT (86.7 At%), and (119)Sn-enriched TBT (83.1 At%) also enabled evaluation of the conditions resulting in quantitative extraction of the species from the solid matrix, in combination with possible alterations depending on the different extraction procedures used (mechanical shaking, ultrasounds, and microwaves). Mathematical equations used for this purpose computed the correct species concentrations directly and, additionally, the decomposition factors (from TBT to DBT and from DBT to MBT) after precise measurement of the (119)Sn/(120)Sn and (118)Sn/(120)Sn ratios for all butyltin species by GC-ICP-MS.     

Modulation of the F1FO‐ATPase function by butyltin compounds

Among butyltin compounds, tributyltin (TBT), widely exploited in the past in antifouling paints for its biocidal properties, is long known as one of the most harmful sea contaminants. Among the ascertained and universal toxicity mechanisms, TBT targeting F₁F_O‐ATPase and thus impairing cell bioenergetics, is here reviewed. While TBT effects on F₁F_O‐ATPase have been investigated for decades, the possible impact of the derivatives dibutyltin (DBT) and monobutyltin (MBT), produced by abiotic and/or biotic dealkylation of TBT and usually considered far less toxic, have been poorly explored up until now. Butyltin effects on F₁F_O‐ATPase and their underlying action mechanism seem to be tightly structure dependent. Butyltins are membrane‐active toxicants. Owing to its more pronounced lipophilicity TBT targets the transmembrane F_O sector, blocks ionic translocation and causes a dose‐dependent loss of sensitivity to F_O inhibitors such as oligomycin and N,N′‐dicyclohexylcarbodiimide. DBT strongly inhibits F₁F_O‐ATPase activity by competing with the Mg⁺² cofactor in the F₁ catalytic site but is ineffective on the enzyme sensitivity to F_O inhibitors. MBT is apparently ineffective. The possible contribution of DBT to the overall butyltin toxicity on membrane systems may not be neglectable since usually TBT coexists with its derivatives in organotin‐exposed animal tissues. Copyright © 2013 John Wiley & Sons, Ltd.     

Headspace solid-phase micro-extraction and gas chromatography-ion trap tandem mass spectrometry method for butyltin analysis in sediments: Optimization and validation

In this work, headspace solid-phase micro-extraction (SPME) combined with gas chromatography-mass spectrometry (GC-MS) method for analysis of butyltin compounds in sediment samples was upgraded by the introduction of tandem mass spectrometry (MS/MS). Optimization and validation of this method based on an one step procedure, tetraethylborate in situ ethylation with simultaneous extraction by headspace SPME, combined with tandem mass spectrometry is described. A simple leaching/extraction step of mono-(M), di-(D) and tri-(T) butyltin (BT) compounds from the sediment is required as sample pre-treatment. The combination of the two techniques headspace SPME and MS/MS, led to very little matrix interference which permitted to attain limits of detection three or more orders of magnitude lower than those attained in previous methods: 0.3 pg g^− 1 for MBT, 1 pg g^− 1 for DBT and 0.4 pg g^− 1 for TBT. Linear response range was from 0.02–1260 ng g^− 1 for MBT, 0.07–1568 ng g^− 1 for DBT and 0.04–2146 ng g^− 1 for TBT and RSD < 15% was also obtained. The method was efficiently applied to a real sample sediment from Sado River estuary in Portugal, revealing the existence of BTs pollution, as the TBT level of 189 ± 15 ng g^− 1 was much higher than the maximum established as provisional ecotoxicological assessment criteria.     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.