Fabrication and magnetic properties of electrospun copper ferrite (CuFe2O4) nanofibers

Tetragonal copper ferrite (CuFe₂O₄) nanofibers were fabricated by electrospinning method using a solution that contained poly(vinyl pyrrolidone) (PVP) and Cu and Fe nitrates as alternative metal sources. The as-spun and calcined CuFe₂O₄/PVP composite samples were characterized by TG-DTA, X-ray diffraction, FT-IR, and SEM, respectively. After calcination of the as-spun CuFe₂O₄/PVP composite nanofibers (fiber size of 89 ± 12 nm in diameter) at 500 °C in air for 2 h, CuFe₂O₄ nanofibers of 66 ± 13 nm in diameter having well-developed tetragonal structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. After calcination at 600 and 700 °C, the nature of nanofibers changed which was possibly due to the reorganization of the CuFe₂O₄ structure at high temperature, and a fiber structure of packed particles or crystallites was prominent. Crystallite size of the nanoparticles contained in nanofibers increases from 7.9 to 23.98 nm with increasing calcination temperature between 500 and 700 °C. Room temperature magnetization results showed a ferromagnetic behavior of the calcined CuFe₂O₄ samples, having their specific saturation magnetization (M_s) values of 17.73, 20.52, and 23.98 emu/g for the samples calcined at 500, 600, and 700 °C, respectively.     

Application of silicate electrospun nanofibers for cell culture

Silicate produced via the sol–gel process is a biocompatible material that has high purity and high homogeneity. In this study, we evaluated the feasibility of electrospun fibers of silicate formed into silicate nonwoven fabrics (SNF) developed via the sol–gel process as substrates for substance production using Chinese hamster ovarian cells CHO-K1, and as substrates for producing drug metabolism simulators from the human cell line HepG2. We compared the adherent and proliferation profiles of the two cell types on SNF with those profiles produced on a hydroxyapatite-pulp composite fiber sheet (HAPS). During 14 days of cultivation, a greater number of CHO-K1 and HepG2 cells continued to grow on SNF compared to those on HAPS. Per unit volume, the HepG2 cells on SNF showed higher hepatic-specific functions than those on HAPS. These results demonstrate the feasibility of SNF as a cell culture substrate for substrate production, and for producing drug metabolism simulators.     

Synthesis and properties of thermoresponsive magnetic polymer composites and their electrospun nanofibers

The thermoresponsive magnetic polymer composites and nanofibers were fabricated. Their thermal and magnetic properties were also investigated. Fe₃O₄ nanoparticles were prepared by coprecipitation method. Further condensation reaction was used to fabricate the double‐layer lauric acid modified Fe₃O₄ (DLF) nanoparticles dispersed well in water. Thermal properties of poly(N‐isopropylacrylamide) (PNIPAAm) and DLF/PNIPAAm composites and their aqueous solutions were measured by TGA and DSC. With the increasing of DLF content, the interaction between DLF and PNIPAAm caused the lower critical solution temperature (LCST) of polymer solution to shift from 33 to 31.25 °C. The effects of concentration and pH on LCST were also studied. The DLF/PNIPAAm nanofibers were fabricated by electrospinning. Their diameters were around 100–250 nm. Magnetization curves of DLF/PNIPAAm composite and nanofibers were overlapped and the saturated magnetizations were the same. Magnetic attraction behaviors of DLF/PNIPAAm polymer solution at temperatures below and above LCST were different. Aggregation of DLF/PNIPAAm above LCST enhanced magnetic moment density as well as magnetic attraction ability. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 848–856     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Adsorption properties of the double-imprinted electrospun crosslinked chitosan nanofibers

Pb(II)-Cd(II) double-imprinted electrospun crosslinked chitosan nanofibers (Pd/Cd-DIECCNs) were prepared by combining electrospinning and ion-imprinting methods, which showed excellent adsorption capacity for both Pb(II) and Cd(II).     

The tensile properties of electrospun nylon 6 single nanofibers

In this article, we have aimed to mechanically characterize the nylon 6 single nanofiber and nanofiber mats. We have started by providing a critical review of the developed mechanical characterization testing methods of single nanofiber. It has been found that the tensile test method provides information about the mechanical properties of the nanofiber such as tensile strength, elastic modulus and strain at break. We have carried out a tensile test for nanofiber/composite MWCNTs nanofiber mats to further characterize the effect of the MWCNTs filling fiber architecture. In addition, we have designed and implemented a novel simple laboratory set‐up for performing tensile test of single nanofibers. As a result, we have established the stress–strain curve for single nylon 6 nanofibers allowing us to define the tensile strength, axial tensile modulus and ultimate strain of this nanofiber. The compared values of the tensile strength, axial modulus and ultimate strain for nylon 6 nanofiber with those of conventional nylon 6 microfiber have indicated that some of the nylon 6 nanofiber molecule chains have not been oriented well along the nanofiber axis during electrospinning and through the alignment mechanism. Finally, we have explained how we can improve the mechanical properties of nylon 6 nanofibers and discussed how to overcome the tensile testing challenges of single nanofibers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1719–1731, 2010     

Oxygen nonstoichiometry and transport properties of strontium substituted lanthanum ferrite

This study presents an investigation of the properties of (La_0.6Sr_0.4)_0.99FeO_3-δ (LSF40) covering thermomechanical properties, oxygen nonstoichiometry and electronic and ionic conductivity. Finally, oxygen permeation experiments have been carried out and the oxygen flux has been determined as a function of temperature and driving force.The electrical conductivity was measured using a 4 probe method. It is shown that the electrical conductivity is a function of the charge carrier concentration only. The electron hole mobility is found to decrease with increasing charge carrier concentration in agreement with recent literature.Values of the chemical diffusion coefficient, D_Chem, and the surface exchange coefficient, k_Ex, have been determined using electrical conductivity relaxation. At D_Chem is determined to be with an activation energy of . The surface exchange coefficient is found to decrease with decreasing oxygen partial pressure.Oxygen permeation experiments were carried out. The flux through a membrane placed between air and wet hydrogen/nitrogen was (corresponding to an equivalent electrical current density of ). The oxygen permeation measurements are successfully interpreted based on the oxygen nonstoichiometry data and the determined transport parameters.     

One-dimensional NiCuZn ferrite nanostructures: Fabrication, structure, and magnetic properties

Ni_0.5−xCu_xZn_0.5Fe₂O₄ (0.0≤x≤0.5) ferrite nanofibers with diameters of 80-160 nm have been prepared by electrospinning and subsequent heat treatment. Both the average grain size and lattice parameter are found to increase with the addition of copper. Fourier transform infrared spectra indicate that the portion of Fe³⁺ ions at the tetrahedral sites move to the octahedral sites as some of the substituted Cu²⁺ ions get into the tetrahedral sites. Vibrating sample magnetometer measurements show that the coercivity of these ferrite nanofibers decreases with increasing Cu concentration, whereas the specific saturation magnetization initially increases, reaches a maximum value at x=0.2 and then decreases with the Cu content further increase. Notable differences in magnetic properties at room temperature (298 K) and 77 K for the Ni_0.3Cu_0.2Zn_0.5Fe₂O₄ nanofibers and corresponding powders are observed and mainly arise from the grain size and morphological variations between these two materials.     

Microstructure and magnetic properties of electrospun one-dimensional Al-substituted SrFe12O19 nanofibers

SrAl_xFe_12−xO₁₉ (x=0-3.0) nanofibers with diameters about 100 nm have been prepared by electrospinning and subsequent heat treatment. With Al³⁺ ion content ranging from 0 to 3.0, the lattice parameters decrease due to Fe³⁺ ions substituted by smaller Al³⁺ ions and the average grain size calculated by the Scherrer's equation reduces from 65 to 37 nm. The magnetization shows a continuous reduction with the Al content and its value measured at 77 K is higher than at room temperature, which can be explained by Bloch's law. For the coercivity, its value initially increases, reaching a maximum value of 617 (298 K) and 547 kA m⁻¹ (77 K) at x=2.0, and then reduces with the Al content further increase largely arising from the substituted Al³⁺ ion arrangement in different interstitial sites of the strontium ferrite unit cell.     

Thermal properties of electrospun polyvinylpyrrolidone/titanium tetraisopropoxide composite nanofibers

Journal of Thermal Analysis and Calorimetry - In this work, polyvinylpyrrolidone/titanium tetraisopropoxide (PVP/TTIP) composite nanofibers were prepared by electrospinning from alcoholic...     

Controlling the surface structure,mechanical properties,crystallinity, and piezoelectric properties of electrospun PVDF nanofibers by maneuvering molecular weight

Polyvinylidene fluoride (PVDF) is a significant polymer in the formation of nanofiber webs via the electrospinning technique. In this paper, three PVDF-wrinkled fiber webs with different molecular weights (M_Ws) (180000, 275000, and 530000) were generated via the electrospinning method by using tetrahydrofuran/N,N-dimethylformamide at the solvent ratio of 1:1 as a mixed solvent. The formation mechanism of the wrinkled electrospun PVDF fibers is demonstrated. Furthermore, the relationships between the M_W and the surface structure, mechanical properties, crystalline phases, and piezoelectric properties of electrospun PVDF fibers are comprehensively investigated. The results reported that the surface structure, mechanical properties, crystalline phases, and piezoelectric properties of wrinkled electrospun PVDF fibers can be affected intensely by maneuvering the M_W. We believe this study can be served as a good reference for the effect of M_W on the morphology and properties of electrospun fibers.     

Synthesis and magnetic properties of nickel ferrite nano-octahedra

High yield of nickel ferrite nano-octahedra with size distribution from 40 to 90 nm were synthesized through a simple hydrothermal method. The formation of faceted octahedra enclosed by {111} planes implies the much faster growth rate along 〈100〉 over 〈111〉 for face-centered cubic phase during hydrothermal process. Magnetic measurements indicated that the sample is soft-magnetic materials with much lower coercivity and much higher saturation magnetization compared to the nickel ferrite nano-crystals with similar size distribution but irregular shapes reported earlier.     

Thermal shrinkage of electrospun PVP nanofibers

This paper outlines the shrinkage of electrospun polyvinylpyrrolidone (PVP) fiber mats during thermal treatment. The thermal behavior and phase changes within the fibers were investigated by DSC and TGA/DTA. Five precursors with different PVP loading in ethanol were electrospun. The mats shrinkage as function of temperature was measured in the RT–200 °C range. Shrinkage rate drastically increased above the polymer glass transition point, T_g (150–180 °C), due to increase in polymer chain mobility. Mats shrinkage at 200 °C as function of PVP concentration showed a minimum at ∼10%wt. Below 10% PVP the mats morphology is non‐uniform, consisting of beads and fibers. Above 10% PVP, only flat and uniform fibers were observed. This paper outlines the dominant mechanism governing the mats shrinkage during heating. In addition, the effect of PVP concentration on the expansion of fibers diameter was investigated and found to be consistent with the linear shrinkage observing a minimum at ∼10% PVP. The effect of applied voltage on mat shrinkage was investigated, and showed a minimum at 12 kV. Understanding the interplay between fibers morphology and thermal shrinkage allows precursor composition and system optimization needed for minimizing shrinkage negative effects on the structure and properties of electrospun fiber mats. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 248–254     

The influence of the chelating/combustion agents on the structure and magnetic properties of zinc ferrite

The present study is reporting the influence of the chelating/combustion agents on the magnetic properties of Zn ferrite. Six chelating/combustion agents, citric acid, egg white, tartaric acid, glycine, glucose and urea, were used to obtain monophase zinc nanoferrite via a sol-gel auto-combustion method. The samples were subjected to a comparative study of structural features and magnetic properties by means of infrared spectroscopy, X-ray diffractometry, scanning electron microscopy and vibrating sample magnetometry. Significant influence of fuel and combustion mode was observed in the magnetic behavior of as-obtained samples. Values of the structural parameters were discovered to vary as a function of fuel choice, and to obtain crystallite size between 38 and 62 nm, inversion degree between 0.239 and 0.807, lattice parameter between 8.4125 and 8.4432 ?. The optimization of sol-gel method synthesis of zinc ferrite nanoparticles by chosing the appropriate fuel is providing structural and magnetic properties of zinc nanoferrite as potential materials to be used in biomedical applications.      

Sizes and properties of clusters of magnetic ferrite structures

The structures of the coordination spheres or orbits of hexagonal and cubic crystals and their sizes, coordination numbers, and coordinates of atoms and cavities have been studied. The orbits of atoms of all sublattices of octahedral and tetrahedral cavities have been calculated. The close-packed structures (FCC and HCP) of oxygen ions have been considered as basic structures. In both structures, the metal cations are distributed over octahedral and tetrahedral cavities. The developed method is used for calculating the orbits of clusters with the hexagonal crystal structure of magnetoplumbite, ilmenite, and corundum, as well as with the cubic structure of spinel and perovskite.     

Dielectric,magnetic and mechanical properties of ferrite composites

The dielectric and magnetic properties of carbonyl—iron (CI) and nickel zinc ferrite polymer composites were studied with respect to the ferrite particulate content and microwave frequency. From the experimental data and using empirical models that relate the composite dielectric and magnetic properties, the respective dielectric and magnetic properties of the neat fillers were estimated. The tensile properties of the particulate composites comprising CI were shown to follow qualitatively Mooney's equation for the elastic modulus. The tensile strength of an elastomeric polyurethane and PVC composites containing CI increased with particulate content, while the elongation to break decreased with filler content. SEM micrographs of tensile fracture surfaces indicated that somewhat better adhesion is obtained in the case of the polyurethane-based composites compared to the PVC ones.     

Structure and magnetic properties of potassium doped bismuth ferrite

The influence of the potassium (K⁺) doping on the structure of multiferroic BiFeO₃ and its relation with ferroelectric and magnetic properties was investigated for perovskites with composition Bi_1−xK_xFeO₃ in the range 0?x?0.07. All the studied samples are described in R3c space group (No. 161). Typical cell parameters (BiFeO₃) in hexagonal setting are a_hex=5.5769(2) Å and c_hex=13.8531(2) Å with Z=6 formula units. The structure determination shows that as the K⁺ content increases, the average cations displacements decrease reducing the polar character of doped samples with respect to pure BiFeO₃ and leading to a change from rhombohedral to a pseudo-cubic symmetry. A structural disorder is related to the substitution of K⁺, which results in strong diffuse scattering (DS) located at the bottom of the Bragg peaks. Magnetic measurements reveal that all the compounds remain antiferromagnetic at room temperature (RT) with almost no change in the transition temperature (Néel temperature T_N).     

Effects of the stabilization temperature on the structure and properties of polyacrylonitrile-based stabilized electrospun nanofiber microyarns

Polyacrylonitrile (PAN) precursor nanofiber microyarns were successfully synthesized using a modified electrospinning method, and then were stabilized at different stabilization temperatures. Effects of stabilization temperature on the structure, thermal, and mechanical properties of stabilized microyarns were studied by FTIR, XRD, DSC, TG, and mechanical behavior test. It was found that when the stabilization temperature was above 250 °C, cyclization and dehydrogenation reactions were basically completed, and PAN crystal microstructure was almost completely destroyed, as well as the thermally stable ladder structure was formed. The results also showed that the strength of the stabilized microyarns increased to a threshold value and started to reduce thereafter as the stabilization temperature increased.