Biocompatible silver nanoparticles embedded in a PEG–PLA polymeric matrix for stimulated laser light drug release

The laser-induced release of a well-known hepatoprotective drug (silibinin, SLB) from a temperature-sensitive polymeric composite loaded with silver nanoparticles (Ag NPs) was investigated. The surface chemistry tuning and the specific design of Ag NPs are fundamental in view of the engineering of specific stimuli-responsive systems, able to control drug release in response to external stimuli. The release profiles of SLB from the newly synthesized PEG–PLA@Ag composite show strong dependences on laser wavelength and Ag NPs’ Surface Plasmon Resonance (SPR). The resonant laser light excites the SPR of the NPs and the absorbed energy is converted into heat due to electron–photon collisions. The heat generated from the nanometer-sized metal particles embedded within the polymer is efficient and strongly localized. The nanovector, irradiated by a relatively low-intensity laser but tuned specifically to the metal NPs’ SPR, releases the encapsulated drug with a higher efficiency than that not irradiated or irradiated with a laser wavelength far from the metal SPR. A combination of analytical techniques including UV–Vis, NMR, and FT-IR spectroscopy and scanning/transmission electron microscopy has been used to study the structural and morphological properties of the composite. The controllable specificity of this approach and the possibility of the SPR-mediated localized photothermal effect to be usefully applied in aqueous environments are the relevant advances of the proposed system for photothermal therapies that make use of visible optical radiation or for the drug delivery in proximity of the tumor cells.     

Gold and Silver Nanomaterial‐Based Optical Sensing Systems

Gold and silver nanomaterials (NMs) such as nanoparticles (NPs) and nanoclusters (NCs) possessing interesting optical properties have become popular sensing materials. With strong surface plasmon resonance (SPR) absorption, extraordinary stability, ease in preparation, conjugation, and biocompatibility, Au NPs are employed to develop sensitive and selective sensing systems for a variety of analytes. However, small sizes of Au and Ag NCs with interesting photoluminescence (PL) properties are used in many PL‐based sensing systems for the detection of important analytes. In addition, many bimetallic AuM NMs possessing strong catalytic activity are used to develop highly sensitive fluorescent sensors. This review article is categorized in four sections based on the NMs used in the sensing systems, including Au NPs, bimetallic AuM NMs, Au NCs, and DNA–Ag NCs. In each section, synthetic strategies and optical properties of the NMs are provided briefly, followed by emphasis on their analytical applications in the detection of small molecules, metal ions, DNA, proteins, and cells. Current challenges and future prospects of these NMs‐based sensing systems will be addressed.     

Rapid synthesize of gold nanoparticles by microwave irradiation method and its application as an optical limiting material

We present rapid synthesis of gold nanoparticles by microwave irradiation method. Sample with average particle size 7.7 nm is obtained from TEM. Linear and nonlinear optical studies of the prepared samples are discussed. Reverse saturable absorption (RSA) at longitudinal surface plasmon resonance (SPR) in gold nanoparticles (Au NPs) have been observed using Z-scan and transient absorption techniques with 532 nm laser pulses. Such RSA behavior makes Au NPs an ideal candidate for optical limiting applications.     

利用激光烧蚀法制备表面等离子体可调谐的金核银壳层纳米颗粒胶体

利用激光烧蚀方法在水中制备了金核银壳层纳米颗粒胶体,发现这种复合胶体的等离子体振动吸收峰频率会随着激光烧蚀时间的不同而发生改变。利用等离子杂化理论定性解释了共振吸收峰可调谐的物理机制.     

1-Hexadecylamine as both reducing agent and stabilizer to synthesize Au and Ag nanoparticles and their SERS application

1-Hexadecylamine (HDA)-capped Au and Ag nanoparticles (NPs) have been successfully prepared by a one-pot solution growth method. The HDA is used as both reducing agent and stabilizer in the synthetic process is favorable for investigating the capping mechanism of Au and Ag NPs’ surface. The growth process and characterization of Au and Ag NPs are determined by Ultraviolet–visible (UV–vis) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). Experimental results demonstrate that the HDA-capped Au and Ag NPs are highly crystalline and have good optical properties. Furthermore, surface-enhanced Raman scattering (SERS) spectra of 2-thionaphthol are obtained on the Au and Ag NPs modified glass surface, respectively, indicating that the as-synthesized noble metal NPs have potentially high sensitive optical detection application.     

Surface Plasmon Resonance and Field Enhancement of Au/Ag Alloyed Hollow Nanoshells

We investigate the nanostructure, surface plasmon resonance （SPR） absorption and nonlinear enhancement of Au/Ag alloyed hollow nanoshells prepared by the replacement reaction of Ag nanoparticles in a HAuCI4 aqueous solution. As the volume of HAuCl4 increases from OmL to 0.S mL, the SPR band of the Au/Ag alloyed nanoshells is tuned from 430nm to 780nm, and the third-order nonlinear optical susceptibility is enhanced nearly by an order of magnitude, which indicates a large enhancement of local field in the Au/Ag alloyed hollow nanoshells with hole defects.     

Optical,structural, and antibacterial properties of biosynthesized Ag nanoparticles at room temperature using Azadirachta indica leaf extract

We report an enhancement of antibacterial properties of Ag nanoparticles (NPs) synthesized at room temperature using leaf extract of Azadirachta indica (Neem) following green synthesis route. To study such antibacterial properties Ag NPs of sizes within 9 nm to 17 nm were synthesized by varying the concentration of Neam leaf extract (NLE). The NP size and size distribution were seen to increase and decrease, respectively, with increase in NLE concentration. Also Ag NPs having a fixed size (~26 nm) was also synthesized by varying the precursor (AgNO₃) concentration. It is noticed that concentration of NLE has significant effects on the control of NP size as well as size distribution whereas there is almost no role of precursor concentration of the NP size. All the Ag NPs are found to have face-centred-cubic crystal structure with preferential growth along (111) plane which is stable one. The peak of X-ray diffraction at ~32.4° (2θ value), which is prominent for low concentrations of NLE and precursor, is identified as (101) plane of Ag crystal. The generation and growth of Ag NPs had also been confirmed using electron microscopic studies. These Ag NPs show prominent surface plasmon resonance (SPR) absorption at ~ 420 nm confirming again the genesis of Ag NPs. The SPR peak shifts towards longer wavelength (redshift) with a corresponding reduction in full width at half maximum with increase in NP size. All of the samples containing Ag NPs show a broad blue photoluminescence (PL) emission at ~ 471 nm. Emission peak is seen to redshift with increase in NP size and is consistent with the optical absorption data. Such PL emission is argued as due to interband transition or plasmon luminescence. Being biocompatible of the green synthesis process, antibacterial properties of these Ag NPs were studies in details considering all the samples (with varied NP size for one set and with fixed NP size for other set of samples). As per our knowledge this is the first report of size related total study of Ag NPs, showing increased antibacterial effect as size decreased and equal antibacterial effect as size equals. It is found that smaller Ag NPs has enhanced antibacterial effects due to large surface area to volume ratio in comparison with bigger sized Ag NPs.     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

Performances of different metals in optical fibre-based surface plasmon resonance sensor

The capability of various metals used in optical fibre-based surface plasmon resonance (SPR) sensing is studied theoretically. Four metals, gold (Au), silver (Ag), copper (Cu) and aluminium (Al) are considered for the present study. The performance of the optical fibre-based SPR sensor with four different metals is obtained numerically and compared in detail. The performance of optical fibre-based SPR sensor has been analysed in terms of sensitivity, signal-to-noise (SNR) ratio and quality parameter. It is found that the performance of optical fibre-based SPR sensor with Au metal is better than that of the other three metals. The sensitivity of the optical fibre-based SPR sensor with 50 nm thick and 10 mm long Au metal film of exposed sensing region is 2.373 μm/RIU with good linearity, SNR is 0.724 and quality parameter is 48.281 RIU^− 1. The thickness of the metal film and the length of the exposed sensing region of the optical fibre-based SPR sensor for each metal are also optimized.     

Diamine-linked array of metal (Au,Ag) nanoparticles on glass substrates for reliable surface-enhanced Raman scattering (SERS) measurements

Metal (Au, Ag) nanoparticles (M NPs) (ca. 30–40 nm) prepared by citrate reduction method were arrayed on amine-terminated glass substrates using diamine linkers with different chain lengths. 1,4-diaminobutane (C-4 diamine) produced the uniform and densely-packed array of M NPs on glass substrates at appropriate concentration ranges, whereas diamine linkers with longer chain lengths (C-8 and C-12 diamines) produced more heterogeneous and aggregated array of M NPs. When compared to Ag NPs, Au NPs demonstrated more controllable and higher packing density due to their mono-dispersed size and higher affinity to diamine linkers. Uniformly arrayed M NPs (Au, Ag) on glass substrates exhibited high enhancement factors in SERS measurements of o-chlorothiophenol probes. Au NPs arrayed substrates exhibited an approximate power-law linearity of Raman intensity with probe concentrations (from 10⁻⁷ M to 10⁻⁴ M), demonstrating more reliable SERS substrates than Ag arrayed substrates with higher SERS activity.     

Au纳米颗粒和CdTe量子点复合体系发光增强和猝灭效应

利用金属蒸发真空多弧离子源注入机, 将Au离子注入到高纯石英玻璃来制备镶嵌有Au 纳米颗粒的衬底材料, 随后将化学方法合成的CdTe量子点旋涂在玻璃衬底上制备了Au纳米颗粒和CdTe量子点复合体系. 通过对镶嵌有Au纳米颗粒的衬底进行热退火处理来控制Au纳米颗粒的生长和分布, 系统研究了Au纳米颗粒的局域表面等离子体共振对CdTe量子点光致发光性能的影响. 利用光学吸收谱、原子力显微镜、透射电子显微镜和光致发光谱对样品进行了表征和测试. 光致发光谱表明, Au纳米颗粒的局域表面等离子体对CdTe量子点的发光有增强效应也有猝灭效应. 深入分析了Au纳米颗粒和CdTe量子点之间的相互作用过程, 提出了关于Au-CdTe 纳米复合体系中CdTe 发光增强和猝灭的新机理. 该实验结果为利用金属纳米颗粒表面等离子体技术制备高发光性能的光电子器件提供了较好的参考.     

Optical properties of the Au–Ag alloy nanowire coated with an anisotropic shell

The optical properties of the Au–Ag alloy nanowire coated with a cylindrical shell with radial dielectric anisotropy are investigated based on quasistatic theory. Numerical results show that the surface plasmon resonance (SPR) peak is redshifted with increasing the component ratio of Au in the alloy, while the intensity of extinction section at the SPR increases with increasing the component ratio of Ag in the alloy. In addition, as the extent of anisotropy of the shell increases, the extinction section at SPR wavelength decreases and the SPR wavelength is redshifted, but compared with the isotropic shell consisting of comparable dielectric constant materials, the SPR has a distinct blueshift for anisotropic shell. We also find that the field enhancement can be completely concentrated inside the anisotropic shell and the electromagnetic transparency can be exhibited.     

Synthesis and photo physical properties of Au @ Ag (core @ shell) nanoparticles disperse in poly vinyl alcohol matrix

Synthesis of core @ shell (Au @ Ag) nanoparticle with varying silver composition has been carried out in aqueous poly vinyl alcohol (PVA) matrix. Core gold nanoparticle (~15 nm) has been synthesized through seed-mediated growth process. Synthesis of silver shell with increasing thickness (~1–5 nm) has been done by reducing Ag⁺ over the gold sol in the presence of mild reducing ascorbic acid. Characterization of Au @ Ag nanoparticles has been done by UV–Vis, High resolution transmission electron microscope (HRTEM) and energy dispersive X-ray (EDX) spectroscopic study. The blue shift of surface plasmon resonance (SPR) band with increasing mole fraction of silver has been interpreted due to dampening of core, i.e. Au SPR by Ag. The dependence of nonlinear optical response of spherical core @ shell nanoparticles has been investigated as a function of relative composition of each metal. Simulation of SPR extinction spectra based on quasi-static theory is done. A comparison of our experimental and the simulated extinction spectra using quasi-static theory of nanoshell suggests that our synthesized bimetallic particles have core @ shell structure rather than bimetallic alloy particles.     

Ag纳米颗粒增强的Ho~(3+)/Tm~(3+)共掺铋锗酸盐玻璃的2μm发光研究

采用基于传统熔融淬冷技术的热化学还原法制备了系列Ag纳米颗粒复合Ho3+/Tm3+共掺铋锗酸盐玻璃样品,研究了Ag纳米颗粒含量对玻璃2μm发光特性的影响.结果表明,Ag纳米颗粒的表面等离子体共振带位于500—900 nm,峰值位于650 nm,透射电子显微镜图像中观察到均匀分布的Ag纳米颗粒,尺寸约为5—10 nm.通过测试玻璃样品在1.7—2.3μm波段的荧光光谱发现,Ag掺杂后Ho3+离子2μm处的荧光强度得到了极大的提高,其中AgCl掺杂质量分数为0.3%时的荧光强度比未掺杂时的荧光强度增强10倍,这归因于Ag纳米颗粒的局域场增强作用.计算得到Ho3+离子的吸收截面为0.491×10-20cm-2,发射截面为1.03×10-20cm-2,当增益系数为0.2时即可实现正的增益.     

Plasmonic Newton's cradle for low-loss subwavelength energy transport: Homogeneous or heterogeneous nanoparticle chains?

Five closely spaced Au or Ag NPs are linearly arranged in analogy with Newton's cradle, forming various homogeneous and heterogeneous NP chains. Using small NPs, the Au–Ag–Ag–Ag–Au heterochain has the lowest propagation loss (17.6%) at short resonance wavelengths. When the NP diameter is increased to 80 nm, the dominant resonance is shifted to longer wavelengths. As low as 6% of the total energy dissipates in the intermediate NP component, and there seems to be little difference between the Au–Ag–Ag–Ag–Au heterochain and the Ag–Ag–Ag–Ag–Ag homochain. Besides the wavelength-dependent intrinsic loss (i.e., the imaginary part of the permittivity) in metals, the real part of the permittivity also plays a critical role in determining the propagation loss. Considering the high fabrication cost of the heterochain, the homochain composed of moderately large Ag NPs (<100 nm) may be an optimal choice for low-loss subwavelength energy transport in practice.     

Broadband tunable plasmonic substrate using self-assembled gold–silver alloy nanoparticles

In the present work, a facile approach of Au–Ag alloy NPs fabrication is proposed for plasmonic inclusion applicative studies. These hybrid NPs were prepared by the sequential deposition of Ag, Au layers on a glass substrate via RF-sputtering followed by high-temperature annealing. Compositional and size controllability of the NPs was attained by changing the ratio of nominal thicknesses of the respective Au, and Ag layers during the deposition. LSPR red (blue) peak shift occurs with increasing layer thickness Au (Ag) signifying the peak sensitivity. The influence of geometrical, compositional, and background media for achieving LSPR-sensitivity is examined and validated by FDTD simulation studies. With the agreeable peak shift tendencies, the proposed study of broadband tunable LSPR-sensitivity is expected to provide a framework for a wide range of plasmonic applications.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface Plasmon Sensor Based on a Dual Dielectric–Silver Photonic Crystal

We present a new type of biosensor. The principle of operation of the device is similar to conventional surface plasmon sensors, except that the ordinary metallic film in surface plasmon sensors is replaced by a one-dimensional photonic bandgap array. The advantages of using a photonic bandgap structure, instead of a metallic film, include enhanced sensitivity, physical and chemical robustness, and the ability to engineer the optical response of the device. We propose and elaborate a biosensor based on a onedimensional (1D) photonic crystal (PC) with a surface plasmon resonance (SPR). In comparison with standard SPR sensors that use silver (Ag ) or gold (Au) films, PC–Ag–PC–Au structures have narrower resonance widths, lower minimum reflectance, and higher sensitivity, making them a much better choice for biosensing applications. Moreover, the structure is compact (H = 1.139 μm), providing a better option in biosensing in comparison with other PC-SPR and conventional SPR sensors.     

Controlled synthesis and biomolecular probe application of gold nanoparticles

In addition to their optical properties, the ability of gold nanoparticles (Au NPs) to generate table immobilization of biomolecules, whilst retaining their bioactivities is a major advantage to apply them as biosensors. Optical biosensors using Au NPs are simple, fast and reliable and, recently, they have been moving from laboratory study to the point of practical use. The optical properties of Au NPs strongly depend on their size, shape, degree of aggregation and the functional groups on their surface. Rapid advances in the field of nanotechnology offer us a great opportunity to develop the controllable synthesis and modification of Au NPs as well as to study on their properties and applications. The size-controlled growth of Au NPs requires the isotropic growth on the surface of Au nuclei whereas anisotropic growth will induce the formation of Au NPs of varying shape. Functionalized Au NPs provide sensitive and selective biosensors for the detection of many targets, including metal ions, small organic compounds, protein, DNA, RNA and cell based on their optical, electrical or electrochemical signals. In this review, we will discuss the size- and shape-controlled growth and functionalization of Au NPs to obtain Au nanoprobes. The basis of the optical detection of Au nanoprobes and their applications in nucleic acid, protein detection and cell imaging are also introduced.     

Characterization of Ag and Au nanoparticles created by nanosecond pulsed laser ablation in double distilled water

Pulsed laser ablation of Ag and Au targets, immersed in double-distilled water is used to synthesize metallic nanoparticles (NPs). The targets are irradiated for 20 min by laser pulses at different wavelengths—the fundamental and the second harmonic (SHG) (λ = 1064 and 532 nm, respectively) of a Nd:YAG laser system. The ablation process is performed at a repetition rate of 10 Hz and with pulse duration of 15 ns. Two boundary values of the laser fluence for each wavelength under the experimental conditions chosen were used—it varied from several J/cm² to tens of J/cm². Only as-prepared samples were measured not later than two hours after fabrication. The NPs shape and size distribution were evaluated from transmission electron microscopy (TEM) images. The suspensions obtained were investigated by optical transmission spectroscopy in the near UV and in the visible region in order to get information about these parameters. Spherical shape of the NPs at the low laser fluence and appearance of aggregation and building of nanowires at the SHG and high laser fluence was seen. Dependence of the mean particle size at the SHG on the laser fluence was established. Comments on the results obtained have been also presented.