通过设计量子库来调控量子比特间的Bell非定域性研究

量子系统间的Bell非定域性是一种比量子纠缠更为严格的量子关联,它在刻画多体量子关联有着不可或缺的作用.类似于量子纠缠,在开放两量子比特和三量子比特系统中的Bell非定域性可能会出现猝死现象.本文建议了一个可供选择的方案即在热库环境中通过增加辅助粒子来调控两量子比特和三量子比特间的Bell非定域性动力学.研究发现：通过调节辅助粒子数目,不仅两量子比特和三量子比特系统的Bell非定域性可以避免猝死现象的发生,而且在长时间极限下它能维持在一个较高水平.论文得到的结果将对多体量子系统间量子关联的调控和避免猝死现象等相关研究有积极的指导意义.     

基于超导量子干涉仪与介观LC共振器耦合电路的量子通信

量子计算如何在实验上实现一直受到广泛关注. 包括超导Josephson结的小量子器件(如超导量子干涉仪, SQUID)是实现量子计算的一种非常具有发展前景的物理系统. 本文通过对SQUID和介观LC共振器耦合电路系统的Cooper对数-相量子化机制的讨论, 合理地调制参数, 由此导出了该耦合电路在两能级近似下的J-C模型形式, 并提出了一种基于此模型的可实现量子信息传递的方案. 根据此方案可以利用介观LC共振器为数据总线来执行两SQUID间电荷量子比特的传递.     

用多粒子态进行量子信息分配

我们提出一个用五粒子态将量子信息分裂成几部分的方案。在这个过程中,如果且只有接受者相互合作才能重建初始比特的态。我们所用的量子通道是Bell太和三比特GHZ态的组合态,这些态在实验上都是很容易制备的。这个方案对某些窃听攻击来说是安全的。而且,它还可以用来实现控制的量子隐形传态。     

三量子比特纠缠Greenberger-Horne-Zeilinger态和W态的量子线路实现

两个简单的量子线路被提出分别用来制备三量子比特Greenberger-Horne-Zeilinger(GHZ)态和W态。众所周知,任意的多量子比特门都可以由受控非门和单量子比特门复合而成。同样,我们发现三量子比特GHZ态和W态也可以由受控非门和单量子比特门来制备。因此,从量子计算的角度来看我们的方案十分重要。由于在整个过程只用到了单量子比特操作和双量子比特操作,所以我们的方案在实验中很容易实现。     

基于超绝热捷径技术快速制备超导三量子比特Greenberger-Horne-Zeilinger态

本文提出了一个基于超绝热捷径技术快速制备超导三量子比特Greenberger-Horne-Zeilinger态的理论方案.该方案首先在量子Zeno动力学的帮助下得到系统的有效哈密顿量,之后通过引入与有效哈密顿量具有相同形式的反向导热哈密顿量来构建绝热捷径,加速了整个系统的演化过程.该方案不需要初态和目标态之间的直接耦合,在实验上也更容易实现.数值模拟结果表明该方案对超导量子比特的自发辐射、波导谐振腔的泄漏以及超导量子比特的退相位是鲁棒的.     

热克尔态下介观LC电路的量子涨落

基于介观电容可看作介观隧道结的物理事实，利用旋波近似方法，对介观LC电路进行量子化处理，量子化后介观LC电路系统等效为一个克尔系统.再利用热场动力学理论方法 研究了介观LC电路在有限温度时热克尔态下电荷和磁通的量子涨落，并对结果进行了讨 论. 关键词： 介观LC电路 热克尔态 量子涨落     

多量子比特核磁共振体系的实验操控技术

随着量子信息与量子计算科学的发展,量子信息处理器被广泛地用于量子计算、量子模拟、量子度量等方面的研究.为了能在实验上实现这些日益复杂的方案,将量子计算机的潜能转化成现实,需要不断提高可操控的量子体系比特位数,实现更复杂的量子操控.核磁共振自旋体系作为一个优秀的量子实验测试平台,提供了丰富而又精密的量子操控手段.近几年来在此平台上进行了不少的多量子比特实验,发展并积累了一系列的多量子比特实验技术.本文首先阐述了核磁共振体系多量子比特实验中的实验困难,然后结合7量子比特标记赝纯态制备以及其他有关实验,对多比特实验过程中应用到的实验技术进行介绍.最后对核磁共振体系多量子比特实验技术方向的进一步研究进行了总结和展望.     

用多粒子态进行量子信息分配

我们提出一个用五粒子态将量子信息分裂成几部分的方案.在这个过程中,如果有且只有接受者相互合作才能重建初始比特的态.我们所用的量子通道是Bell态和三比特GHZ态的组合态,这些态在实验上都是很容易制备的.这个方案对某些窃听攻击来说是安全的.而且,它还可以用来实现控制的量子隐形传态.     

电路量子电动力学中基于超绝热捷径的控制相位门实现

针对绝热算法在系统演化过程中需要较长操作时间的问题,本文提出了电路量子电动力学系统中基于超绝热捷径的两量子比特控制相位门的快速制备方案.首先将量子比特的能级进行编码,针对不同初始态分类讨论,获得系统的有效哈密顿量.通过反绝热驱动,推导出系统有效哈密顿量的修正项,以抑制不同本征态之间不必要的跃迁,从而获得了高保真度的基于超绝热捷径控制相位门.数值模拟验证了本方案的有效性,最终保真度为0.991.所提方案可以加速演化,并且比绝热通道更有效.此外,本方案对谐振器的衰减和超导量子比特的退相干具有鲁棒性.通过对谐振腔的泄漏、量子比特的自发辐射和退相位的影响分析,得到的系统最终保真度始终保持在0.984以上.     

超导磁通量子比特的性能表征

采用超导电路实现的量子计算近十几年来发展迅速,目前已经实现了质因数15的分解、高保真度的单和双量子比特等等。为实现量子计算,采用正交剥离自对准工艺,制备了射频超导量子干涉器件(rf-SQUID)结构的超导磁通量子比特芯片。在稀释制冷机mK温度下,对其基本结构参数进行了表征,并通过理论分析、软件仿真验证了测试结果。此外,还分析了测试系统的噪声性能,对可能的噪声源进行了消除。最后,通过量子比特初态的制备,观测到了双势阱能级间的共振隧穿现象。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.