不断创新的电化学研究方法：厦门大学电化学研究工作简介之二

不断创新的电化学研究方法（厦门大学电化学研究工作简介之二）林仲华，罗瑾，田中群，孙世刚，林昌健，毛秉伟，杨勇，林华水执笔（固体表面物理化学国家重点实验室，厦门大学化学系，厦门３６１００５）１历史的回顾与自然科学的其它分支学科一样，电化学科学的建立和纵...     

DNA的电化学研究

本文对ＤＮＡ与电极的相互作用，ＤＮＡ的电化学反应，ＤＮＡ与其它分子相互作用的电化学研究和ＤＮＡ的电化学分析等方面的研究进展作了归纳和评述。     

蛋白质修饰的电化学研究

蛋白质的翻译后修饰对于生命体执行正常的生理功能具有十分重要的作用,是蛋白质科学研究的重要内容.目前研究蛋白质修饰的方法主要有质谱法、亲和层析等,然而由于蛋白质修饰研究的复杂性,迫切需要发掘新的技术手段.电化学方法理论成熟、应用广泛,在生命科学许多领域发挥着越来越重要的作用.蛋白质的体外修饰必将导致蛋白质特定位点基团的变化,可以利用巧妙设计的电化学方法予以表征和分析,以期探明修饰对蛋白质结构和功能的影响.此外,又可以利用电化学定量分析的独特优势快速准确地测定蛋白质修饰中涉及的相关酶活.正因为如此,蛋白质体外修饰的电化学研究已引起越来越多的关注.本文以作者课题组近期研究工作为主,结合国内外同行的相关代表性工作,介绍电化学方法在蛋白质修饰方面的近期研究进展,并探讨了今后的发展方向和趋势.     

酞菁铑的合成及其性质研究

本文合成了铑(Ⅲ)酞菁配合物,用循环伏安法研究了该配合物在二甲基甲酰胺、吡啶和二甲亚砜等有机溶剂中的电化学,并利用薄层透光电极电解;获得了该配合物四种不同氧化态时的电子光谱,并对电极反应机理及其产物进行了讨论.     

用于现场FTIR及UV/Vis光谱电化学的高质量简单结构的光透薄层电化学池

设计制作了一种应用于紫外可见、红外电谱电化学的新型光透薄层电化学池(OTTLE),并以铁氰化钾水溶液、二茂铁乙腈溶液体系进行了表征。池腔几何结构的合理设计使电位降和边缘效应降至最低。该池有良好的伏安响应特性并可用它得到高质量的UV/Vis和IR光谱。由于简单的结构及低廉的造价使适用于光谱电化学研究的电化学池变得更容易得到。     

氯过氧化物酶-聚L-赖氨酸/GC电极的电化学特性

应用电化学方法在玻碳电极上修饰聚L-赖氨酸膜,以1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐做交联剂,固定氯过氧化物酶.修饰电极的循环伏安曲线呈现一对可逆的氧化还原峰,表明聚L-赖氨酸能够很好地促进氯过氧化物酶在电极表面的直接电子传递,这是一个受吸附控制并伴随有质子转移的准可逆电子传递过程.该电极有很好的稳定性,并能显著地电催化氧的电化学还原反应.     

β‐Cyclodextrin‐Platinum Nanoparticles/Graphene Nanohybrids: Enhanced Sensitivity for Electrochemical Detection of Naphthol Isomers

Naphthol isomers, including α‐naphthol (α‐NAP) and β‐naphthol (β‐NAP), are used widely in various fields and are harmful to the environment and human health. The qualitative and quantitative determination of naphthol isomers is therefore of great significance. Herein, β‐cyclodextrin (β‐CD)‐platinum nanoparticles (Pt NPs)/graphene nanosheets (GNs) nanohybrids (β‐CD‐PtNPs/GNs) were prepared for the first time using a simple wet chemical method and characterized by atomic force microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and electrochemical methods, and then applied successfully in the ultrasensitive electrochemical detection of naphthol isomers. The results show that the oxidation peak currents of naphthol isomers obtained at the glassy carbon (GC) electrode modified with β‐CD‐PtNPs/GNs are much higher than those at the β‐CD/GNs/GC, PtNPs/GNs/GC, GNs/GC, and bare GC electrodes. Additionally, compared with other electrochemical sensors developed previously, the proposed electrode results in improved detection limits of about one order of magnitude for α‐NAP (0.23 nM ) and three orders of magnitude for β ‐NAP (0.37 nM ).     

在线电化学／分离分析方法

对电化学衍化之后续以分离分析手段的在线联用方法作了 概述，讨论了电化学／质谱，在化学。高效液相色谱／质谱，电质学／质谱／质谱，电化学／高效液相色谱和电化学／气相色谱等的研究与应用，展 望了这个领域的发展前景。     

Electrochemical studies of chloroperoxidase on poly-L-lysine film modified GC electrode

<正>Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrode was achieved with a formal redox potential of -0.23 V vs.SCE.The CPO-PLL/GC modified electrode showed a good catalytic activity for electrocatalytical reduction of O_2,promising for a broad range of CPO-catalyzed transformations.     

炭气凝胶纳米颗粒固定葡萄糖氧化酶的直接电化学

利用间苯二酚和甲醛在碱性环境下制备炭气凝胶(CA), 通过扫描电镜(SEM)、透射电镜(TEM)、比表面积测试Brunauer-Emmett-Teller (BET)等方法分析载体的形貌结构; 以CA为载体通过吸附法固定葡萄糖氧化酶(GOD)并修饰玻碳(GC)电极, 得到GOD/CA/GC电极. 在0.1 mol·L^-1磷酸盐缓冲溶液中, 利用循环伏安法研究了GOD/CA/GC 电极的直接电化学行为和对葡萄糖的催化性能. 结果表明, 以CA为载体可以很好地固定GOD并保持其生物活性, 在无任何电子媒介体存在时, GOD在电极上实现了直接电子转移, GOD/CA/GC电极对葡萄糖具有很好的电催化性能.     

Temperature-Responsive Electrocatalysis Based on Poly(N-Isopropylacrylamide)-Modified Graphene Oxide (PNIPAm-GO)

Poly(N-isopropylacrylamide)-modified graphene oxide (PNIPAm-GO), which is a type of thermally responsive GO, was designed and synthesized through a covalent “grafting-from” strategy. The as-prepared modified nanosheets integrated the individual advantages of two components, such as the thermal sensitivity of the PNIPAm terminal as well as the conductivity and the open 2D structure of the GO substrate. PNIPAm-GO was able to perform the reversible regulation of hydrophilicity/hydrophobicity in aqueous solution upon variations in the temperature. Such a unique property might also lead to the utilization of PNIPAm-GO as an intelligent electrode material to achieve a switchable electrochemical response toward a [Fe(CN)₆]^3−/4− probe. The PNIPAm-GO modified glassy carbon electrode (PNIPAm-GO/GC electrode) was able to exhibit better electrochemical performance in an ON/OFF switching effect than the PNIPAm-modified glassy carbon electrode (PNIPAm/GC electrode) without GO owing to the intrinsic properties and large surface area of the introduced GO. Moreover, it was found that the PNIPAm-GO/GC electrode also displayed excellent thermally responsive electrocatalysis toward the detection of 1,4-dihydro-β-nicotinamide adenine dinucleotide (NADH) and dopamine (DA), which resulted in two different catalytic statuses on the same electrode. This kind of switchable catalytic performance of the PNIPAm-GO/GC electrode might greatly enhance the flexibility of its application, and thus it is expected to have wide potential for applications in the fields of biosensors and biocatalysis.     

Surface modification and characterization of phenanthroline nanofilms on carbon substrate

Modification of glassy carbon (GC) surfaces with phenanthroline derivatives (PDs) such as 5‐amino‐1,10‐phenanthroline (5AP) and 5,6‐diamino‐1,10‐phenanthroline (56DAP) is described in this study. Surface modification experiments were performed by cyclic voltammetry (CV) scanning from + 1.2 to + 2.7 V at scan rate of 100 mV/s applying 30 potential scans in acetonitrile (CH₃CN) containing 1 mM PDs and 100 mM tetrabutylammoniumtetrafluoroborate (TBATFB). The presence of PDs on GC electrode was confirmed using CV, electrochemical impedance spectroscopy (EIS), contact angle measurements and ellipsometry and comparing with the results of bare GC electrode. A mechanism was proposed for the electrochemical modification of the GC electrode surface with PDs. The structure of the 5AP and 56DAP films was also discussed in the light of electrochemical and spectroscopic data. The complex‐forming ability of the modified surfaces against metal cations was investigated by square‐wave voltammetry (SWV). It was shown that surfaces having 1,10‐phenanthroline ligands with different functional groups were quite useful for the determination of transition metal ions. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of Explosives Using Electrochemically Reduced Graphene

A graphene‐based electrochemical sensing platform for sensitive determination of explosive nitroaromatic compounds (NACs) was constructed by means of electrochemical reduction of graphene oxide (GO) on a glassy carbon electrode (GCE). The electrochemically reduced graphene (ER‐GO) adhered strongly onto the GCE surface with a wrinkled morphology that showed a large active surface area. 2,4‐Dinitrotoluene (2,4‐DNT), as a model analyte, was detected by using stripping voltammetry, which gave a low detection limit of 42 nmol L⁻¹ (signal‐to‐noise ratio=3) and a wide linear range from 5.49×10⁻⁷ to 1.1×10⁻⁵ M . Further characterizations by electrochemistry, IR, and Raman spectra confirmed that the greatly improved electrochemical reduction signal of DNT on the ER‐GO‐modified GC electrode could be ascribed to the excellent electrocatalytic activity and high surface‐area‐to‐volume ratio of graphene, and the strong π–π stacking interactions between 2,4‐DNT and the graphene surface. Other explosive nitroaromatic compounds including 1,3‐dinitrobenzene (1,3‐DNB), 2,4,6‐trinitrotoluene (TNT), and 1,3,5‐trinitrobenzene (TNB) could also be detected on the ER‐GO‐modified GC electrode at the nM level. Experimental results showed that electrochemical reduction of GO on the GC electrode was a fast, simple, and controllable method for the construction of a graphene‐modified electrode for sensing NACs and other sensing applications.     

玻碳电极上多巴胺的氧化还原机理

用电化学方法和光谱电化学方法详细研究了多巴胺(DA)在玻碳(GC)电极表面的反应机理.结果表明DA的电氧化是一个单电子转移过程而不是一个双电子转移过程,在此过程中有半醌自由基中间体存在.用多种电化学手段测定了电极反应动力学参数,提出了新的电极反应机理.     

Effects of organophilic clay on the solvent‐maintaining capability,dimensional stability,and electrochemical properties of gel poly(vinylidene fluoride) nanocomposite electrolytes

Four quaternary alkyl ammonium salts were used in an organophilic procedure, performed on montmorillonite clay, and resulted in intercalation in dimethylformamide (DMF) or ethylene carbonate (EC)/propylene carbonate (PC) as a cosolvent between poly(vinylidene fluoride) (PVdF) and the organophilic clay. An examination using X‐ray diffraction revealed that PVdF entered galleries of montmorillonite clay, and it exhibited exfoliation and intercalation phenomena when it was analyzed with transmission electron microscopy. Gel PVdF nanocomposite electrolyte materials were successfully prepared by the addition of the appropriate percentages of DMF or PC/EC as a cosolvent, organophilic clay, and lithium perchlorate to PVdF. The maximum ionic conductivity was 1.03 × 10^?2 S/cm, and the materials exhibited better film formation, solvent‐maintaining capability, and dimensional stability than electrolyte films without added organophilic clays. The results of cyclic voltammetry testing showed that the addition of the organophilic clays significantly enhanced the electrochemical stability of the polymer electrolyte system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3873–3882, 2002