Potassium-thiacalix[8]arene assembly: structure and guest sorption profiles

Treatment of thiacalix[8]arene (3.8H) with KH in THF, followed by recrystallization from methanol, affords an adduct of [K4(3.4H)].8MeOH as a pale yellow crystal (4), which shows highly-extensive coordination that gives rise to a zeolitic structure. An adduct of 4 gives apohost [K4(3.4H)] with the loss of methanol, which can adsorb such gaseous organic guest molecules as methanol and benzene. After binding methanol as the guest molecule, the apohost is converted back to the original structure of 4.     

Ligand-stabilized ruthenium nanoparticles: synthesis, organization, and dynamics

The decomposition of the ruthenium precursor Ru(COD)(COT) (1, COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) in mild conditions (room temperature, 1--3 bar H(2)) in THF leads, in the presence of a stabilizer (polymer or ligand), to nanoparticles of various sizes and shapes. In THF and in the presence of a polymer matrix (Ru/polymer = 5%), crystalline hcp particles of uniform mean size (1.1 nm) homogeneously dispersed in the polymer matrix and agglomerated hcp particles (1.7 nm) were respectively obtained in poly(vinylpyrrolidone) and cellulose acetate. The same reaction, carried out using various concentrations relative to ruthenium of alkylamines or alkylthiols as stabilizers (L = C(8)H(17)NH(2), C(12)H(25)NH(2), C(16)H(33)NH(2), C(8)H(17)SH, C(12)H(25)SH, or C(16)H(33)SH), leads to agglomerated particles (L = thiol) or particles dispersed in the solution (L = amine), both displaying a mean size near 2--3 nm and an hcp structure. In the case of amine ligands, the particles are generally elongated and display a tendency to form worm- or rodlike structures at high amine concentration. This phenomenon is attributed to a rapid amine ligand exchange at the surface of the particle as observed by (13)C NMR. In contrast, the particles stabilized by C(8)H(17)SH are not fluxional, but a catalytic transformation of thiols into disulfides has been observed which involves oxidative addition of thiols on the ruthenium surface. All colloids were characterized by microanalysis, infrared spectroscopy after CO adsorption, high-resolution electron microscopy, and wide-angle X-ray scattering.     

一种制备碳载高合金化Pt-Ru催化剂的方法

提出了在四氢呋喃(THF)和H₂O混合溶液中用一般的化学还原法在室温下制备碳载Pt-Ru(Pt-Ru/C)催化剂的新方法。与在纯水中制得的Pt-Ru/C催化剂相比，其Pt-Ru粒子的合金化程度高、平均粒径较小且相对结晶度低，因此，该催化剂对甲醇氧化的电催化活性远高于在纯水中制得的Pt-Ru/C催化剂。高合金化程度的原因是H₂PtCl₆和RuCl₃在THF和H₂O混合溶液中的起始还原电位相近。此外，在THF和H₂O混合溶液中，THF和H₂O的体积比的改变并不影响制得的Pt-Ru/C催化剂中Pt-Ru粒子的合金化程度，但对Pt-Ru粒子的粒径以及相对结晶度有较大影响。     

Turbidimetric titration and gradient high-performance liquid chromatography of polystyrene samples

Summary Polystyrene samples of narrow molecular-weight distribution have been eluted according to their molecular weight from columns packed with bare silica Si50, phenyl, or C18 bonded phase by gradients of methanol and tetrahydrofuran (THF) or ofiso-octane and THF. Among the six combinations investigated,iso-octane/THF with a silica column formed a proper normal-phase system whereas methanol/THF with a C18 column formed a proper reversed-phase system. The combinations of C18 column andiso-octane/THF or of Si50 column and methanol/THF gradient did not correspond to the approved polarity rules in high-performance liquid chromatography but were nevertheless effective in separating polystyrene mixtures by molecular weight. Methanol andiso-octane are nonsolvents for polystyrene whereas THF is a solvent. The solubility of polystyrene as a function of molecular weight and concentration was determined by means of turbidimetric titration of solutions in THF with the nonsolvents used in the gradients. The solubility and elution characteristics were almost identical on C18 columns or in methanol/THF combinations. The elution from phenyl bonded phase and Si50 columns usingiso-octane/THF gradients required more THF than the solubility experiments. Information is also given on the occurrence of multimodal elution patterns.     

Carbon-bridged bis(phenolato)lanthanide alkoxides: syntheses, structures, and their application in the controlled polymerization of epsilon-caprolactone

A convenient method for the synthesis of lanthanide alkoxo complexes supported by a carbon-bridged bis(phenolate) ligand 2,2'-methylenebis(6-tert-butyl-4-methylphenoxo) (MBMP2-) is described. The reaction of (C5H5)3Nd with MBMPH2 in a 1:1 molar ratio in THF gave the bis(phenolato)lanthanide complex (C5H5)Nd(MBMP)(THF)2 (1) in a nearly quantitative yield. Complex 1 further reacted with 1 equiv of 2-propanol in THF to yield the bis(phenolato)lanthanide isopropoxide [(MBMP)2Nd(mu-OPr(i))(THF)2]2 (2) in high yield. Complex 2 can also be synthesized by the direct reaction of (C5H5)3Nd with MBMPH2 in a 1:1 molar ratio and then with 1 equiv of 2-propanol in situ in THF. Thus, the analogue bis(phenolato)lanthanide alkoxides [(MBMP)2Ln(mu-OR)(THF)2]2 [R = Pr(i), Ln = Yb (3); R = Me, Ln = Nd (4), Yb (5); R = CH2Ph, Ln = Nd (6), Yb (7)] were obtained by the reactions of (C5H5)3Ln (Ln = Nd, Yb) with MBMPH2 and then with 2-propanol, methanol, or benzyl alcohol, respectively. The ytterbium complex {[(MBMP)2Yb(THF)2]2(mu-OCH2Ph)(mu-OH)} (8) was also isolated as a byproduct. The single-crystal structural analyses of complexes 1-3 and 8 revealed that the coordination geometry around lanthanide metal can be best described as a distorted tetrahedron in complex 1 and as a distorted octahedron in complexes 2, 3, and 8. A O-H...Yb agostic interaction was observed in complex 8. Complexes 2-7 were shown to be efficient catalysts for the controlled polymerization of epsilon-caprolactone.     

Synthesis and Crystal Structure of Tetra（（8-quinolyl）-amido-N）ytterbium Bi（tetrahydrofuran-O）lithium

The treatment of the mixture of n-BuLi with 1 equiv.8-aminoquinoline in THF in situ,which reacted further with 1/3 equiv.of YbCl3 in THF,to give the homoleptic lanthanide amide ate complex Yb(NH-C9H6N)4Li(C4H8O)2(1).The crystal structure was determined by X-ray diffraction and the following crystallographic data were obtained:C44H44N8O2YbLi,Mr = 896.85,monoclinic,space group C2/c,a = 7.8384(16),b = 22.294(5),c = 22.668(5),β = 97.614(5)°,V = 3926.3(14)3,Z = 4,Dc = 1.517 g/cm3,F(000)= 1812,μ(MoKα)= 2.431 mm-1,R = 0.0542 and wR = 0.1523 for 3372 observed reflections with I > 2σ(I).The structure of molecule 1 consists of one ytterbium atom,one lithium atom,four 8-aminoquinoline ligands and two THF molecules.The ytterbium atom is coordinated by eight nitrogen atoms of four 8-aminoquinoline ligands,forming a distorted dodecahedral geometry.     

合金化程度对炭载Pt-Ru催化剂性能的影响

在含四氢呋喃(THF)的水溶液中, 室温下用NaBH₄还原H₂PtCl₆和RuCl₃制得Pt-Ru/C催化剂. 其Pt-Ru 粒子的合金化程度较高, 平均粒径较小, 相对结晶度较低. 因此对甲醇氧化的电催化活性远高于Pt-Ru 粒子的平均粒径和相对结晶度相似的, 而且Pt-Ru合金化程度低的商业化的E-TEK的Pt-Ru/C催化剂, 表明Pt-Ru的合金化程度对Pt-Ru/C催化甲醇氧化的电催化活性有很大的影响.     

Divalent molybdenum complexes of the dipyrrolide ligand system. Isolation of a Mo2 unit with a 45 degree twist angle

The preparation of divalent Mo complexes of dipyrrolide dianions was carried out by reacting Mo(2)(acetate)(4) with the dipotassium salts of Ph(2)C(2-C(4)H(3)NH)(2) and 2-[1,1-bis(1H-pyrrol-2-yl)ethyl]pyridine. The two reactions respectively afforded the diamagnetic [[Ph(2)C(C(4)H(3)N)(2)](2)Mo(2)(OAc)(2)[K(THF)(3)][K(THF)]].THF (1) and [[(2-C(5)H(4) N)(CH(3))C(2-C(4)H(3)N)(2)]Mo(OAc)[K(THF)]](2).THF (2). Both compounds retained two acetate units in the dimetallic structure. Conversely, the reaction of Me(8)Mo(2)Li(4)(THF)(4) with Et(2)C(2-C(4)H(3)NH)(2) afforded the paramagnetic dimer [[Et(2)C(C(4)H(3)N)(2)](4)Mo(2)Li(2)][Li(THF)(4)](2).0.5THF (3). The paramagnetism is most likely caused by the 45 degree rotation of the two Mo(dipyrrolide) units with respect to each other and which, in turn, is caused by the presence of two lithium cations in the molecular structure.     

Synthesis and characterisation of cyclopentadienyl complexes of barium: precursors for atomic layer deposition of BaTiO3

Cyclopentadienyl complexes Ba(C5Me5)2(THF)2 (1), Ba(C5Me5)2(A) (A = THF, dien, trien, diglyme, triglyme) (2-5), Ba(Pr(i)3C5H2)2(THF)2 (6), Ba(Bu(t)3C5H2)2(THF) (7), Ba(Me2NC2H4C5Me4)2 (8) and Ba(EtOC2H4C5Me4)2 (9) were prepared and characterised with TGA/SDTA, NMR and MS. Crystal structures of 2, 4, 5, 7, 8 and 9 are presented. All complexes prepared sublime under reduced pressure and complexes 1, 6 and 7 showed volatility also under atmospheric pressure. Complexes 1, 6 and 7 lose the coordinated THF when evaporated while complexes 2-5 are sublimable as complete molecules under reduced pressure. Complexes with bulky cyclopentadienyl ligands (6 and 7) are the most thermally stable and volatile among the prepared barocenes. X-ray structure determinations reveal that all the complexes studied are monomeric. Complexes 1, 7 and 8 were successfully tested in BaTiO3 thin film depositions by atomic layer deposition (ALD).     

New methodologies for the preparation of porphodimethenes and their conversion to trans-porphyrins with functionalized naphthyl spacers

The MacDonald [2 + 2]-type condensation of readily available 5-aryl-substituted dipyrromethanes with acenaphthenequinone leads to the trans-syn- and anti-porphodimethenes, which in turn can be converted to the alpha,alpha- and alpha,beta-porphyrin atropisomers, respectively. Treatment of the metalated or unmetalated porphodimethenes with KOH or NaOMe in THF followed by protonation with HCl results in a ring opening of the acenaphthenone and formation of the trans-8-carboxynaphthylporphyrins or their esters (NaOMe) after oxidation. Alternatively, the porphyrin formation can be accomplished by reaction of the porphodimethenes with acids in the presence of water or methanol. Reaction with NaBH(4) in a THF--methanol mixture yields the corresponding dialcohols in nearly quantitative yields. Sixteen different building blocks were prepared in order to evaluate the generality of this new synthetic approach, with Ar = 2,4,6-Me(3)C(6)H(2); 2,6-Cl(2)C(6)H(3); 2,6-F(2)C(6)H(3); 3,4-tBu(2)C(6)H(3); 3,4,5-(MeO)(3)C(6)H(2); 4-BrC(6)H(4); 4-MeC(6)H(4); and 4-MeOOCC(6)H(4) at the meso positions. The synthesized porphodimethenes and porphyrins have been fully characterized, and the X-ray structure analyses of three representative derivatives are presented.     

(C_5H_9C_5H_4)_3NdBrLi(THF)_3和(C_5H_9C_5H_4)_3SmTHF的合成与结构

无水三氯化钕与环戊烷基环戊二烯钠、溴化锂(1:2:1摩尔比)反应,除去不溶物和溶剂后,产物在己烷/四氢呋喃溶剂中冷冻得到兰紫色晶体(C5H9C5H4)3NdBrLi(THF)3(配合物1)。其中心金属Nd3+的配位数为10,以η5与3个环戊二烯基相连,并通过单溴原子桥连锂原子,形成双核结构。该晶体属三斜晶系,P`1空间群。晶体学参数为a=12.048(2)、b=13.498(3)、c=13.831(3);α=104.16(3)、β=104.07(3)、γ=95.96(3); V=2083.3(7)3、Z=2、Dc=1.35Mg/m3、Mr=847.01gmol-1、F(000)=874。无水三氯化钐与环戊烷基环戊二烯钠(1:3)反应,产物在-30oC下的己烷溶剂中结晶得桔红色晶体(C5H9C5H4)3SmTHF(配合物2)。该晶体属正交晶系,Fdd2空间群。晶胞参数a=28.175(5) 、b=46.24(2)、c=9.167(4);V=11943(8)3、Z=16、Dc=1.38Mg/m3、 Mr=622.11 g·mol-1、F(000)=5136。10配位的金属Sm3+与3个环戊二烯基以η5相连,并结合一个四氢呋喃溶剂分子。     

Molar mass distribution of a commercial aliphatic hyperbranched polyester based on 2,2-bis(methylol)propionic acid

The determination of absolute molar mass averages (MMA) and molar mass distribution (MMD) of the fourth generation hyperbranched polyester Boltorn H40 (Perstorp Specialty Chemicals AB), synthesized from 2,2-bis(methylol)propionic acid (bis-MPA) as the AB2 monomer and ethoxylated pentaerythritol as the B4 core molecule was studied in dependence on the type of solvent, preparation procedure and solution concentration. Due to a large number of polar hydroxyl groups, ester, and also some residual carboxyl groups, a very stable H-bond network is formed at room temperature, that can-not be completely disrupted by dissolving the sample in solvents such as tetrahydrofuran (THF), N,N-dimethylacetamide (DMAc), a mixture of THF and methanol (9:1, v/v), and a solution of 0.7% LiBr in DMAc. The H-bonds between the polar groups break down completely and the dissolution of Boltorn H40 on the molecular level is achieved only when the sample is thermally pretreated at a minimum 140 C for at least 20 min prior to dissolution in solvents THF/methanol or LiBr/DMAc. Thus, determined MMA and molar mass distribution (MMD) of Boltorn H40 are independent on the kind of the solvent and solution concentration.     

Syntheses, structures, and magnetic properties of the face-centered cubic clusters [Tp(8)(H(2)O)(12)M(6)Fe(8)(CN)(24)](4+) (M = Co, Ni)

Reactions between K[TpFe(CN)3] (Tp- = hydrotris(1-pyrazolyl)borate) and M(ClO4)2 x 6H2O (M = Co or Ni) in a mixture of acetonitrile and methanol afford, upon crystallization via THF vapor diffusion, [Tp8(H2O)12Co6Fe8(CN)24](ClO4)4.12THF x 7H2O (1) and [Tp8(H2O)12Ni6Fe8(CN)24](ClO4)4.12THF x 7H2O (2). Both compounds contain cyano-bridged clusters with a face-centered cubic geometry, wherein octahedral CoII or NiII centers are situated at the face-centering sites. The results of variable-temperature magnetic susceptibility measurements indicate the presence of ferromagnetic exchange coupling within both molecules to give ground states of S = 7 and 10, respectively. Low-temperature magnetization data reveal significant zero-field splitting, with the best fits for the Co6Fe8 and Ni6Fe8 clusters yielding D = -0.54 and 0.21 cm-1, respectively; ac magnetic susceptibility measurements performed on both samples showed no evidence of the slow relaxation effects associated with single-molecule magnet behavior.     

Alkaline earth metal complexes of a phosphine-borane-stabilized carbanion: synthesis, structures, and stabilities

The reaction between either MgI2 or CaI2 and 2 equiv of [(Me3Si)2{Me2(H3B)P}C]K (2) in toluene gives the corresponding organo-alkaline earth metal compounds [(Me3Si)2{Me2(H3B)P}C]2M in moderate to good yields [M = Mg (3), Ca (4)]. Compound 3 crystallizes solvent-free, whereas X-ray quality crystals of 4 could not be obtained in the absence of coordinating solvents; crystallization of 4 from cold methylcyclohexane/THF gives the solvate [(Me3Si)2{Me2(H3B)P}C]2Ca(THF)4 (4a). The corresponding heavier alkaline earth metal complexes [(Me3Si)2{Me2(H3B)P}C]2M(THF)5 [M = Sr (7), Ba (8)] are obtained from the reaction between MI2 and 2 equiv of 2 in THF, followed by recrystallization from cold methylcyclohexane/THF. Compound 3 degrades over a period of several weeks at room-temperature both in the solid state and in toluene solution to give the free phosphine-borane (Me3Si)2{Me2(H3B)P}CH (5) as the sole phosphorus-containing product. In addition, compounds 3, 4, and 4a react rapidly with THF in toluene solution, yielding 5 as the sole phosphorus-containing product; in contrast, compounds 7 and 8 are stable toward this solvent.     

Syntheses and X-ray structures of potassium derivatives and a paramagnetic nickel(II) complex of a cyclodiphosph(III/V)azane monoselenide

The cyclodiphosph(III/V)azane monoselenide [(t)Bu(H)N(Se)P(micro-N(t)Bu)(2)PN(H)(t)Bu] (6, H(2)cdppSe where cdpp = cyclodiphosphazane) is obtained in quantitative yield from the comproportionation reaction of equimolar amounts of H(2)cdpp (7) and H(2)cdppSe(2) (3) in toluene at 85 degrees C. The X-ray structures of 3 and 6 reveal that both the monoselenide and the diselenide adopt a cis,endo,exo arrangement of the (t)BuNH groups. Metalation of 6 with 1 equiv of KO(t)Bu or 2 equiv of KCH(2)Ph in THF produces [(THF)K[HcdppSe]](2) (8) or [[(THF)(2)K](2)[cdppSe]](2) (9), respectively. The initial deprotonation involves the (t)BuNH group attached to the P(V) center in 6. In the dimeric structure of 8, both of the monoanionic ligands are bis-N,Se-chelated to the two K(+) cations to give a distorted K(2)N(2)Se(2) octahedron. In the centrosymmetric dimer 9, the dianionic ligands adopt two different coordination modes to the bis-solvated K(+) ions, viz., tridentate N,N',N" coordination and N,Se-chelation involving both exo- and endocyclic nitrogen atoms. The dimer is linked through K-Se interactions. The reaction of 2 equiv of 8 with NiCl(2)(PMe(3))(2) in THF produces [Ni(HcdppSe)(2)], which has a distorted tetrahedral structure and exhibits anomalous (1)H, (13)C, and (31)P NMR chemical shifts owing to the proximity of the paramagnetic Ni(II) center.     

Synthesis,characterization, and laser flash photolysis reactivity of a carbonmonoxy heme complex

We present here the synthesis, characterization, and flash photolysis study of [(F(8)TPP)Fe(II)(CO)(THF)] (1) [F(8)TPP = tetrakis(2,6-difluorophenyl)porphyrinate(2-)]. Complex 1 crystallizes from THF/heptane solvent system as a tris-THF solvate, [(F(8)TPP)Fe(II)(CO)(THF)].3THF (1.3THF), with ferrous ion in the porphyrin plane (C(61)H(52)F(8)FeN(4)O(5); a = 11.7908(2) A, b = 20.4453(2) A, c = 39.9423(3), alpha = 90 degrees, beta = 90 degrees, gamma = 90 degrees; orthorhombic, P2(1)2(1)2(1), Z = 8; Fe-N(4)(av) = 2.00 A; N-Fe-N (all) = 90.0 degrees ). This complex (as 1.THF) has also been characterized by (1)H NMR [six-coordinate, low-spin heme; CD(3)CN, RT, delta 8.82 (s, pyrrole-H, 8H), 7.89 (s, para-phenyl-H, 8H), 7.46 (s, meta-phenyl-H, 4H), 3.58 (s, THF, 8H), 1.73 (s, THF, 8H)], (2)H NMR (pyrrole-deuterated analogue) [(F(8)TPP-d(8))Fe(II)(CO)(THF)] [THF, RT, delta 8.78 ppm (s, pyrrole-D)], (13)C NMR (on (13)CO-enriched adduct) [THF-d(8), RT, delta 206.5 ppm; CD(2)Cl(2), RT, delta 206.1 ppm], UV-vis [THF, RT, lambda(max), 411 (Soret), 525 nm], and IR [293 K, solution, nu(CO) 1979 cm(-)(1) (THF), 1976 cm(-)(1) (acetone), 1982 cm(-)(1) (CH(3)CN)] spectroscopies. In order to more fully understand the intricacies of solvent-ligand binding (as compared to CO rebinding to the photolyzed heme), we have also synthesized the bis-THF adduct [(F(8)TPP)Fe(II)(THF)(2)]. Complex 2 also crystallizes from THF/heptane solvent system as a bis-THF solvate, [(F(8)TPP)Fe(II)(THF)(2)].2THF (2.2THF), with ferrous iron in the porphyrin plane (C(60)H(52)F(8)FeN(4)O(4); a = 21.3216(3) A, b = 12.1191(2) A, c = 21.0125(2) A, alpha = 90 degrees, beta = 105.3658(5) degrees, gamma = 90 degrees; monoclinic, C2/c, Z = 4; Fe-N(4)(av) = 2.07 A; N-Fe-N (all) = 90.0 degrees ). Further characterization of 2 includes UV-vis [THF, lambda(max), 421 (Soret), 542 nm] and (1)H NMR [six-coordinate, high spin heme; THF-d(8), RT, delta 56.7 (s, pyrrole-H, 8H), 8.38 (s, para-phenyl-H, 8H), 7.15 (s, meta-phenyl-H, 4H)] spectroscopies. Flash photolysis studies employing 1 were able to resolve the CO rebinding kinetics in both THF and cyclohexane solvents. In CO saturated THF [[CO] approximately 5 mM] and at [1] congruent with 5 microM, the conversion of [(F(8)TPP)Fe(II)(THF)(2)] (produced after photolytic displacement of CO) to [(F(8)TPP)Fe(II)(CO)(THF)] was monoexponential, with k(obs) = 1.6 (+/-0.2) x 10(4) s(-)(1). Reduction in [CO] by vigorous Ar purging gave k(obs) congruent with 10(3) s(-)(1) in cyclohexane. The study presented in this report lays the foundation for applying fast-time scale studies based on CO flash photolysis to the more complicated heterobimetallic heme/Cu systems.     

Preparation and properties of acetyliodotricarbonylcobaltate; a novel product from the reaction of methyl iodide with tetracarbonylcobaltate

The reaction of PPN[Co(CO)₄] with an excess of methyl iodide in THF at 0°C gives almost quantitatively PPN[Co(CO)₃{C(O)CH₃})I], which has been shown by X-ray crystallography and spectroscopic measurements to adopt a trigonal bipyramidal structure with three carbonyls in the equatorial plane; it reacts with hydrogen or with sulfuric acid to give acetaldehyde, and with methanol/pyridine to give methyl acetate. The new anion is of interest as a potential intermediate in the cobalt/iodine catalyzed carbonylation or hydrocarbonylation of methanol.     

Combined column–mobile phase mixture statistical design optimization of high-performance liquid chromatographic analysis of multicomponent systems

A statistical approach for the simultaneous optimization of the mobile and stationary phases used in reversed-phase liquid chromatography is presented. Mixture designs using aqueous mixtures of acetonitrile (ACN), methanol (MeOH) and tetrahydrofuran (THF) organic modifiers were performed simultaneously with column type optimization, according to a split-plot design, to achieve the best separation of compounds in two sample sets: one containing 10 neutral compounds with similar retention factors and another containing 11 pesticides. Combined models were obtained by multiplying a linear model for column type, C8 or C18, by quadratic or special cubic mixture models. Instead of using an objective response function, combined models were built for elementary chromatographic criteria (retention factors, resolution and relative retention) of each solute or pair of solutes and, after their validation, the global separation was accomplished by means of Derringer's desirability functions. For neutral compounds a 37:12:8:43 (v/v/v/v) percentage mixture of ACN:MeOH:THF:H₂O with the C18 column and for pesticides a 15:15:70 (v/v/v) ACN:THF:H₂O mixture with the C8 column provide excellent resolution of all peaks.     

Synthesis and X－ray Structure of Solvated Mono－cyclopentadienyl Samarium Dichloride（C_5H_5）SmCl_2（THF）_3

ＳｙｎｔｈｅｓｉｓａｎｄＸ－ｒａｙＳｔｒｕｃｔｕｒｅｏｆＳｏｌｖａｔｅｄＭｏｎｏ－ｃｙｃｌｏｐｅｎｔａｄｉｅｎｙｌＳａｍａｒｉｕｍＤｉｃｈｌｏｒｉｄｅ（Ｃ_５Ｈ_５）ＳｍＣｌ_２（ＴＨＦ）_３￥ＱｉａｎＣｈａｎｇ－Ｔａｏ；ＺｈｕＤｕｎ－Ｍｉｎｇ；ＳｕｎＪ...     

Synthesis and Crystal Structure of [Cis-1,10phenanthroline-palladium(Ⅱ)(THF)_2]dinitrate (THF = Tetrahydrofuran)

1 INTRODUCTION The coordination chemistry of Pd(Ⅱ) com- plexes with didentate nitrogen coordination ligands has been extensively studied for a few decades[1]. Pd(Ⅱ) trends to bond to the didentate nitrogen in cis-mode and such complexes have potential usage in the emerging area of self-assembly[2]. We will report herein the synthesis and crystal structure of a cis-coordinated mononuclear Pd(Ⅱ) complex with one 1,10-phenanthroline and two THF as ligands, 1. 2 EXPERIMENTAL 2. …