Fast supercritical fluid chromatography of polymers using packed capillary columns

Summary Fast separations of perfluorinated polyethers and polymethylsiloxanes that are composed of 50–80 oligomers were demonstrated in packed capillary column supercritical fluid chromatography (SFC) using a carbon dioxide mobile phase. Separations were accomplished within 10 min using a 13 cm×250 μm i.d. column packed with 2 μm porous octadecyl bonded silica (ODS) particles. Effects of particle diameter of the packing material and pressure programming on separation were investigated, and packed column SFC was compared with open tubular column SFC. Results show that as the particle diameter was decreased from 5 to 3 to 2 μm and the column length was reduced from 85 to 43 to 13 cm, the separation time could be reduced from 70 to 20 to 10 min while still maintaining similar separation (resolution). Short columns packed with small porous particles are very suitable for fast SFC separations of polymers.     

Comparison of titania, zirconia, and silica stationary phases for separating diesel fuels according to hydrocarbon group-type by supercritical fluid chromatography

Silica, zirconia, and titania columns were compared for their ability to separate diesel samples into saturates, mono-, di-, tri-, and polyaromatics by supercritical fluid chromatography (SFC) using pure CO(2) according to ASTM method D 5186-03. A titania column coupled in series to a silica column was found to provide the highest overall group-type resolutions based on 20 model compounds, with resolutions as high as 14.7 for saturates versus monoaromatics and 11.9 for monoaromatics versus diaromatics. An oilsands-derived Synfuel light diesel, a commercial Ontario diesel, and a heavy Shell Canada Ltd. diesel blending feedstock were studied on a titania-silica coupled column as well as on a conventional silica column. The Synfuel results were similar (within 0.5 mass%) on both the conventional bare silica column and the titania-silica coupled column. The heavier commercial diesel and diesel blending feedstock samples yielded different results on the titania-silica coupled column compared to the silica column alone, demonstrating the importance of achieving the highest possible resolutions when baseline separation of group-types is not obtained.     

Fast supercritical fluid chromatography using capillaries packed with nonporous particles

Summary Packed columns containing microparticles provide high column efficiency per unit time and strong retention characteristics compared with open tubular columns, and they are favored for fast separations. Nonporous particles eliminate the contribution of solute mass transfer resistance in the intraparticle void volume characteristic of porous particles, and they should be more suitable for fast separations. In this paper, the evaluation of nonporous silica particles of sizes ranging from 5 to 25 μm in packed capillary columns for fast supercritical fluid chromatography (SFC) using neat CO₂ is reported. These particles were first deactivated using polymethyl-hydrosiloxanes and then encapsulated with a methylphenylpolysiloxane stationary phase. The retention factors, column efficiencies, column efficiencies per unit time, separation resolution, and separation resolution per unit time for fast SFC were determined for various length capillaries packed with various sizes of polymerencapsulated nonporous particles. It was found that 15 μm nonporous particles provided the highest column efficiency per unit time and resolution per unit time for fast packed capillary SFC. Under certain conditions, separations were completed in less than 1 min. Several thermally labile silylation reagent samples were separated in times less than 5 min. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Enantioselective separations by packed column subcritical and supercritical fluid chromatography

Enantioselective separations have been one of the most successful applications of supercritical fluid chromatography (SFC). Although analytical scale separations have dominated the literature, the use of SFC for preparative chiral separations is growing. Both analytical and preparative scale SFC separations seek to take advantage of the high efficiency, high throughput, and rapid method development associated with the technique. This review will cover recent developments in the application of SFC to enantioseparations.Contribution of the National Institute of Standards and Technology. Not subject to copyright.     

Applications of monolithic columns in gas chromatography and supercritical fluid chromatography

Porous monoliths are well‐known stationary phases in high‐performance liquid chromatography and capillary electrochromatography. Contrastingly, their use in other types of separation methods such as gas or supercritical fluid chromatography is limited and scarce. In particular, very few studies address the use of monolithic columns in supercritical fluid chromatography. These are limited to silica‐based monoliths and will be covered in this review together with an underlying reason for this trend. The application of monoliths in gas chromatography has received much more attention and is well documented in two reviews by Svec and Kurganov published in 2008 and 2013, respectively. The most recent studies, covered in this review, build on the previous findings and on further understanding of the influence of preparation conditions on porous properties and chromatographic performance of poly(styrene‐co‐divinylbenzene), polymethacrylate, and silica‐based monolithic columns while expanding to polymer‐based monoliths with incorporated metal organic frameworks and to vinylized hybrid silica monoliths. In addition, the potential application of porous layer open tubular monolithic columns in low‐pressure gas chromatography will be addressed.     

On-line extraction and separation by supercritical fluid chromatography with packed columns

The application of fluid extraction in combination with fluid chromatography with packed column and flame ionization detection is described. Fluid chromatographic equipment is shown. Applications of this system to drug characterization are demonstrated.     

Modifier effects on packed and capillary columns in supercritical fluid chromatography

Summary The separation of polar thermally labile solutes is one of the potentially most rewarding fields of SFC application. A presupposition for such applications is, however, mobile phases having relatively high solvent strengths. A promising approach to achieve this is the use of mobile phases consisting of carbon dioxide with a polar additive. In this work, the chromatographic effects of different concentrations of an additive, isopropanol, in carbon dioxide have been studied on capillary and packed columns. A series of antibiotics was used as test substances. Best results were obtained with carbon dioxide/8% isopropanol as mobile phase on a capillary column coated with a cyanopropyl-substituted polysiloxane stationary phase.     

Preparing titania aerogel monolithic chromatography columns using supercritical carbon dioxide

The search for a method to fabricate monolithic inorganic columns has attracted significant recent attention due to their unique ability in separation applications of various biomolecules. Silica and polymer based monolithic columns have been prepared, but titania and other metal oxide monoliths have been elusive, primarily due to their fragility. This article describes a new approach for preparing nanostructured titania based columns, which offer better performance over conventional particle packed columns for separating a wide variety of biomolecules including phosphopeptides. TiO₂ monolithic aerogels were synthesized in separation columns using in situ sol‐gel reactions in supercritical carbon dioxide (scCO₂) followed by calcination, and compared to those prepared in heptanes. The characterization results show that scCO₂ is a better solvent for the sol‐gel reactions, providing lower shrinkage with the anatase TiO₂ monolith composed of nanofibers with very high surface areas. The monolithic columns show the ability to isolate phosphopeptides with little flow resistance compared to conventional titania particle based microcolumns.     

Capillary electrochromatography using columns packed with a supercritical fluid carrier

Summary Columns for capillary electrochromatography may be prepared by packing reversed phase silica-based material using a supercritical fluid carbon dioxide carrier. Procedures for the in-situ manufacture of frits and UV detection windows, and the wetting of columns are described. The columns were employed in two commercial instruments (and a home-built system), and their properties investigated during the separation of standard mixtures of test compounds. The columns are highly efficient and durable, with reduced plate heights of 1.0–1.4. The repeatability of retention time, peak area and peak height was measured. The influence of applied voltage and column temperature and of electrokinetic injection parameters was explored, along with other practical considerations.     

Apparatus and separations in supercritical fluid chromatography

An apparatus for the chromatography with supercritical dense gases (supercritical fluids) has been designed, the characteristic feature being a pressure cascade. Three decreasing pressure levels containing the supply part, the chromatographic column, and the detector, respectively are controlled by feed back loops. Independent control and programming of pressure, temperature, and feed rate thereby become possible. Separations of oligostyrenes with n-pentane/methanol as the mobile phase and porous silica as the stationary phase were carried out on analytical and preparative scales. The resolution appears to be superior to that obtainable with liquid chromatography. Mass spectra of the peaks showed that oligomeric species of 1 monomer weight are cleanly separated. The influence of the parameters, particularly pressure and temperature, on the efficiency of the separation was studied. Slow upward pressure and temperature programming were found beneficial for the separation.     

Chiral separations in sub- and supercritical fluid chromatography

Sub- and supercritical fluid chromatography (SFC) received more and more attention in pharmaceutical analysis during the last years. Especially for chiral separations, this technique is becoming increasingly popular. This review gives an overview of most chiral separation applications using SFC, covering the literature from 2000 on.     

Density gradients in packed columns: II. Effects of density gradients on efficiency in supercritical fluid separations

To investigate how fluid compressibility affects efficiency in supercritical fluid separations, band dispersion along a packed capillary column was measured from on-column elution rate profiles obtained under solvating gas chromatography (SGC) conditions; this allowed efficiency to be determined with respect to position along the column. Theoretical efficiency was also modeled. The model indicates that the primary cause of band broadening in SGC is high mobile phase velocity near the column outlet. However, the experimental results show that significant band broadening also occurs near the column inlet in a region that corresponds to high elution rates of the analyte. On-column detection also revealed spatial focusing of the analyte as it moves down the column density gradient.     

Achieving rapid low-pressure ion chromatography separations on short silica-based monolithic columns

Short silica-based monolithic columns (0.5-1 cm) are coated with the surfactant didodecyldimethylammonium bromide (DDAB) and used for fast ion exchange separations of small inorganic anions. Sources of extra-column band broadening are assessed and minimized to obtain separations of seven analytes (iodate, chloride, nitrate, bromide, nitrite, phosphate, sulphate) in two minutes at 2 mL/min. Eluents used are 6 and 9 mM 4-cyanophenol at pH 7.3-7.4 or 5 mM 4-hydroxybenzoic acid at pH 5.6. DDAB coating stability is improved by 15-fold by the addition of a DDAB coated pre-column before the injection valve. Separations are obtained using a low-pressure glass syringe.     

Direct analysis of gramicidin double helices using packed column supercritical fluid chromatography

Direct analysis of the monomeric and four double helical dimeric conformations of gramicidin has been achieved using packed column supercritical fluid chromatography (pSFC). Using a PRP-1 polymeric column and typical conditions of 40 degrees C column temperature, 25 MPa column pressure, and 35% n-pentanol modifier addition, all of the gramicidin conformers were readily separated. To evaluate the method, the dynamic characteristics of the monomer and dimer species were monitored as a function of solvent type, incubation time, solvent temperature, and initial concentration. The findings agree with those previously obtained by other methods but also yield new information about the relative amounts of two closely related dimers (species 1 and 2) as well as the simultaneous changes in the full dimer/monomer distribution. Results indicate that the developed pSFC method can be an informative complimentary tool for readily monitoring changes in the full profile of gramicidin species present in different environments.     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

Zwitterionic ion chromatography with carboxybetaine surfactant-coated particle packed and monolithic type columns

Both particle packed (25 cm x 0.46 cm I.D. SUPELCOSIL 5 microm C18) and monolithic type (10 cm x 0.46 cm I.D. Merck Chromolith Performance C18) reversed-phase substrates were dynamically coated with a carboxybetaine type zwitterionic surfactant ((dodecyldimethyl-amino) acetic acid) and investigated as stationary phases for use in zwitterionic ion chromatography (ZIC). Investigations into eluent concentration and pH were carried out using KCl eluents containing 0.2 mM of the carboxybetaine surfactant to stabilise the column coatings. It was found that eluent concentration decreased anion retention whilst simultaneously increasing peak efficiencies, which may be due to the dissociation of intra- and inter-molecular salts of the carboxybetaine surfactant under higher ionic strength conditions. The Effect of eluent pH was an increase in anion retention with decreased eluent pH due to the increased protonation of the weak acid terminal group of the carboxybetaine, causing both a relative increase in the positive charge of the stationary phase and less repulsion of the anions by the dissociated weak acid group. The carboxybetaine-coated monolithic phase was applied to rapid anion separations using elevated flow rates and flow rate gradients.     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

High-resolution separations of protein isoforms with liquid chromatography time-of-flight mass spectrometry using polymer monolithic capillary columns

The separation of intact proteins, including protein isoforms arising from various amino-acid modifications, employing a poly(styrene-co-divinylbenzene) monolithic capillary column in high-performance liquid chromatography coupled on-line to a time-of-flight mass spectrometer (MS) is described. Using a 250 mm × 0.2 mm monolithic capillary column high-sensitivity separations yielding peak capacities of >600 were achieved with a 2h linear gradient and formic acid added in the mobile phase as ion-pairing agent. The combination of high-resolution chromatography with high-accuracy MS allowed to distinguish protein isoforms that differ only in their oxidation and biotinylation state allowing the separation between structural isoforms. Finally, the potential to separate proteins isoforms due to glycosylation is discussed.