Glass transition of crosslinked polystyrene shells formed on the surface of calcium carbonate whisker

Glass transition of core/shell capsules consisting of calcium carbonate whisker as a core and crosslinked polystyrene as a shell was studied by differential scanning calorimetry. The thickness of the crosslinked shell was in the range of 26–81 nm. The crosslinked shells were revealed to show higher glass transition temperatures (T_g) than the corresponding bulk values. It was revealed that a thicker shell exhibits a lower T_g than a thinner shell, and that capsules without core (hollow capsules) exhibit lower T_g's than the corresponding core/shell capsules. These results suggest that the interfacial molecular interaction plays a role in the segmental relaxation, which is responsible for the glass transition. The difference in T_g between the core/shell and hollow samples was reduced when a coupling agent, methacrylic acid 3‐(trimethoxysilyl)propyl ester, was not included. This also suggests the interfacial effect on T_g. However, the results still suggest that the enhancement of T_g for the present crosslinked shells is not only due to the interfacial effect but also to the effects of chain configuration and heterogeneous crosslink. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2475–2485, 2006     

Multicomponent latex IPN materials: 2. Damping and mechanical behavior

The integrals of the linear loss shear modulus vs. temperature (loss area, LA) and linear tan δ vs. temperature (tan δ area, TA) were characterized for various core/shell latex particles with synthetic rubber, poly(butadiene-stat-styrene) [P (Bd/S), 90/10], and interpenetrating polymer networks (IPN) as the cores. The IPN cores were composed of P(Bd/S) (T_g ≃ − 70°C) and an acrylate based copolymer (T_g around 10°C) for potential impact and damping improvement in thermoplastics. Poly(styrene-stat-acrylonitrile) (SAN, 72/28) was the shell polymer for all these polymers. Under the same loading, for both toughening and damping controls, among the IPN core/shell, blend of separate core/shell, and multilayered core/shell polymers, the IPN core/shell polymers were the best dampers. However, the other core/shell polymers also showed higher LA values than P(Bd/S)/SAN core/shell polymer. A comparison of LA values via a group contribution analysis method was made, the effect of particle morphology and phase continuity on damping being studied. Inverted core/shell latex particles (glassy polymer SAN was synthesized first) showed much higher LA and TA values than normal core/shell ones (rubbery polymer was synthesized first). Models for maximum LA and TA behavior are proposed. The damping property was essentially controlled by the phase miscibility and morphology of the core/shell latex particles. The LA values for each peak in these multiphase materials provided some indication of the several fractional phase volumes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1501–1514, 1997     

Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.     

Synthesis of Starburst Oligoanilino[60]fullerene and Poly(Dimethylsiloxane) Triblock Copolymers

Abstract

A new synthetic approach for the fabrication of core‐shell like conducting elastomers was described. The approach utilized the facile intermolecular self‐assembly of poly(dimethylsiloxane) (PDMS) in DMSO leading to formation of a core particle, while soluble oligoaniline (A _x ) segments dispersed in the solution phase resembling a shell overlayer for building the morphology. This morphology was demonstrated by bis[penta(tetraanilinofullereno)] bis(aminopropyl)poly(dimethylsiloxane) [PDMS‐(F5A₄)₂] triblock co‐oligomers synthesized using a functionalized C₆₀ derivative as a linker. Observation of ¹H NMR spectroscopic responses on the PDMS particle formation in DMSO‐d ₆ is consistent with the proposed core‐shell geometry with oligoaniline moieties located at the shell overlayer.     

Zwitterionic shell‐crosslinked micelles from block‐comb copolymer of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA)

Through reversible addition‐fragmentation chain transfer (RAFT) polymerization of t‐butyl acrylate (tBA) and RAFT copolymerization of 2‐dimethylaminoethyl methacrylate (DMAEMA) with poly(ethylene glycol) methyl ether methacrylate (PEGMEMA), block‐comb copolymer of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA) was prepared. After the self‐assembly of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA) into core‐shell spherical micelles, P(PEGMEMA‐co‐DMAEMA) segments of the shell was crosslinked with 1,2‐bis(2‐iodoethoxy)ethane and the core of PtBA was selectively hydrolysized with trifluoroacetic acid. Thus, zwitterionic shell‐crosslinked micelles with positively charged outer shell and negatively charged inner core were obtained. Dynamic light scattering, transmission electron microscope, Zeta potential measurement, and nuclear magnetic resonance were used to confirm the formation of the zwitterionic shell‐crosslinked micelles. They showed the excellent resistance to the variation of pH value and possessed the positive values throughout the whole range of pH range even if the carboxylic groups of the micelles was much more than ammonium groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Clam shell repair from the brown ring disease: a study of the organic matrix using Confocal Raman micro-spectrometry and WDS microprobe

Since 1987, the Manila clam Ruditapes philippinarum has been regularly affected by the brown ring disease (BRD), an epizootic caused by the bacterium Vibrio tapetis. This disease is characterized by the development of a brown deposit on the inner face of valves. While most of the clams die from the BRD infection, some of them are able to recover by mineralizing a new repair shell layer, which covers the brown deposit by a process of encapsulation. The purpose of this work was to study the organic matrix of the shells of Manila clams in the inner shell layer before, during and after the brown deposit and during the shell repair process by confocal Raman micro-spectrometry and wavelength dispersive spectrometry (WDS) microprobe. In addition, the organic matrix of the repaired shell layer was extracted and quantified, by using standard biochemical shell matrix extractions protocols. The brown deposit exhibited high luminescence intensity in Raman spectra, and an increase of S, C, Sr (forming two peaks) and a decrease of Ca, Na concentrations (% w/w), using WDS microprobe mapping and cross-sectional transects. The signature of these trace elements was similar to that recorded on periostracal lamina (% w/w). The high S concentration likely corresponds to the presence of a high amount of sulfated organic compounds. Interestingly, on cross-sectional transects, before the brown deposit, a thin layer of the shell showed also a high luminescence, which may suggest that this layer is modified by bacteria. After the brown deposit, at the beginning of the shell repair process, the luminescence and the S concentration remain high, before declining the level found in non-BRD-affected shells. Quantification of the organic matrix shows that the shell repair layer zone is significantly different from non-BRD-affected shell layer, in particular with a much higher amount of insoluble matrix.     

Glass transition and its characteristic length for thin crosslinked polystyrene shells of rodlike capsules

Rodlike capsules consisting of a calcium carbonate core and a crosslinked polystyrene shell were synthesized, and the glass transition temperature (T_g) and characteristic length of the glass transition ξ(T_g) for the thin outer shells were investigated by temperature‐modulated differential scanning calorimetry. The shell thickness ranged from 20 to 129 nm. The ratio of the T_g for the outer shell to the bulk T_g increases with decreasing shell thickness d. The d‐dependence of T_g is interpreted in terms of a simple two‐layer model which assumes that an immobile layer exists near the core‐shell interface. Shells of hollow capsules unexpectedly exhibit a similar d‐dependence of T_g to that for the filled capsules. This is characteristic of the crosslinked polymeric shells, and is attributed to certain spatial heterogeneity of crosslink distribution, and/or to the unstable configuration in the ultrathin shell that does not undergo relaxation due to the crosslink. The latter idea is based on the assumption that unstable configurational state is responsible for the T_g shift from the bulk value observed for nanosized polymeric materials. The ratio of the characteristic length for the shell of the filled capsule to that of the bulk ξ_f(T_g)/ξ_b(T_g) decreases with decreasing d. The results are interpreted in terms of the configurational entropy, and it is also suggested that the configurational state of network polymer chains in the shell affects the characteristic length. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2116–2125, 2008     

Shell model calculations: An efficient new algorithm

We describe an efficient new algorithm which extends the range of feasible shell model calculations. This algorithm is applicable to single shell and multiple shell configurations, where two or more quantum numbers (e.g., L and S) are required to label the states within each shell. The algorithm proceeds by factoring the shell model Hilbert space into a product of subspaces, one for each angular momentum. N-particle wave functions are built up recursively from N – 1 particle wave functions. Three kinds of N – 1- to N-particle coefficients are required to carry out the construction of N-particle electron (or fermion) states from N – 1 particle states. These are (1) coefficients of fractional parentage (CFP s) within a single shell, (2) outerproduct isoscalar factors (OISF s) within a single angular momentum subspace, and (3) innerproduct isoscalar factors (IISF s) which describe how multishell states within the complementary angular momentum subspaces are combined to form totally antisymmetric wave functions. All three types of N – 1- to N-particle coefficients are generated recursively using a single powerful and efficient matrix diagonalization algorithm. Matrix elements of single particle creation and annihilation operators are expressed in terms of single particle CFP s, OISF s, and IISF s. We also describe an efficient algorithm for computing matrix elements of products of creation and anihilation operators by inserting and summing over complete sets of intermediate states. This is the Feynman-like sum over path overlaps procedure. Timing benchmarks are presented comparing the new Drexel University shell model (DUSM ) code with a state of the art shell model code.     

原子价壳层电子量子拓扑指数与元素电负性的关系

在基态原子价壳层电子隐核图的基础上, 基于拓扑化学原理以及原子价壳层电子结构特征, 构建了原子价壳层电子量子拓扑指数(AEI), 它对基态原子实现唯一性表征, 结合原子价壳层电子平均化能(∑n_iE_i/∑n_i)等参数, 建立了一套新的元素电负性标度: X_N＝－0.588710AEI₁＋0.761214AEI₂＋0.154982(∑n_iE_i/∑n_i)－0.080929. 该式给出了周期表中氢至镅共95种元素的电负性, 结果表明新电负性标度X_N与Pauling电负性标度颇为一致. 进一步从原子价轨道量子拓扑指数确定了sp, sp², sp³杂化轨道的电负性. 新标度在元素和物质的结构-性质研究中具有一定的适用性.     

Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Polyampholytic Graft Copolymers as Matrix for TiO2/Eosin Y/[Mo3S13]2− Hybrid Materials and Light-Driven Catalysis

An effective strategy to enhance the performance of inorganic semiconductors is moving towards organic-inorganic hybrid materials. Here, we report the design of core–shell hybrid materials based on a TiO₂ core functionalized with a polyampholytic (poly(dehydroalanine)-graft-(n-propyl phosphonic acid acrylamide) shell (PDha-g-PAA@TiO₂). The PDha-g-PAA shell facilitates the efficient immobilization of the photosensitizer Eosin Y (EY) and enables electronic interactions between EY and the TiO₂ core. This resulted in high visible-light-driven H₂ generation. The enhanced light-driven catalytic activity is attributed to the unique core–shell design with the graft copolymer acting as bridge and facilitating electron and proton transfer, thereby also preventing the degradation of EY. Further catalytic enhancement of PDha-g-PAA@TiO₂ was possible by introducing [Mo₃S₁₃]²⁻ cluster anions as hydrogen-evolution cocatalyst. This novel design approach is an example for a multi-component system in which reactivity can in future be independently tuned by selection of the desired molecular or polymeric species.     

Open‐Shell Characters and Second Hyperpolarizabilities of One‐Dimensional Graphene Nanoflakes Composed of Trigonal Graphene Units

The impact of topology on the open‐shell characters and the second hyperpolarizabilities (γ) has been addressed for one‐dimensional graphene nanoflakes (GNFs) composed of the smallest trigonal graphene (phenalenyl) units. The main results are: 1) These GNFs show not only diradical but also multiradical characters when increasing the number of linked units. 2) GNFs composed of an equivalent number of units can exhibit a wide range of open‐shell characters—from nearly closed‐shell to pure multiradical characters—depending on the linking pattern of the trigonal units. 3) This wide variation in open‐shell characters is explained by their resonance structures and/or by their (HOMO?i)?(LUMO+i) gaps deduced from the orbital correlations. 4) The change in the linking structure of the units can effectively control their open‐shell characters as well as their γ values, of which the longitudinal components are significantly enhanced for the singlet GNFs having intermediate open‐shell characters. 5) Singlet alternately linked (AL) systems present intermediate multiradical characters even in the case of a large number of units, which creates a significant enhancement of γ with increasing the size, whereas nonalternately linked (NAL) systems, which present pure multiradical characters, possess much smaller γ values. Finally 6) by switching from the singlet to the highest spin states, the γ values of NAL systems hardly change, whereas those of AL systems exhibit large reductions. These fascinating structure–property relationships between the topology of the GNFs, their open‐shell characters, and their γ values not only deepen the understanding of open‐shell characters of GNFs but aim also at stimulating further design studies to achieve giant NLO responses based on open‐shell graphene‐like materials.     

A note on the importance of d orbitals in the calculation of effective interactions and the excitation spectra of atoms and molecules

The focal point of our discussion is the examination of truncated basis sets used in obtaining an accurate first principles clculation of the effective valence shell Hamiltonian by the canonical transformation-cluster expansion approasch. Subsequent diagonalization of this effecitve valence shell hamiltonian yields the valence shell transition energies. A detailed analysis of numerical results obtained using a number of different basis sets of hydrogen-like orbitals together with rigorous symmetry arguments celarly demonstrates the special role played by d orbitals in computing the ³P → ¹D transition energy in carbon. The failure of early attempts to calculate the effective Hamiltonian for ethylene from first principles is examined in the light of recent ab initio calculations on ethylene involving d orbitals and the computations reported in this paper. We conclude that accurate calculations of the effective valence shell Hamiltonian for molecules must consider d orbitals in the excited orbital basis set.     

Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe3O4@polyaniline composites as a highly efficient,magnetically separable and atom‐economical catalyst for reduction of nitrobenzenes

The preparation of Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe₃O₄@polyaniline composites is reported. Fe₃O₄ nanoclusters were first synthesized through the solvothermal method and then the SiO₂ shell was coated on the Fe₃O₄ surface via a sol–gel process. To prepare Fe₃O₄@SiO₂@polyaniline composites, polyvinylpyrrolidone was first grafted on to the surface of Fe₃O₄@SiO₂ composites and subsequently polymerization of aniline was carried out via an ultrasound‐assisted in situ surface polymerization method. Selective etching of the middle SiO₂ layer was then accomplished to obtain the yolk–shell Fe₃O₄@polyaniline composites. The approach uses polyaniline (PANI) conductive polymer as a template for the synthesis of Ni@Pd core–shell nanoparticles. The catalytic activity of the synthesized yolk–shell Fe₃O₄@PANI/Ni@Pd composite was investigated in the reduction of o‐nitroaniline to benzenediamine by NaBH₄, which exhibited conversion of 99% in 3 min with a very low content of the catalyst. Transmission electron microscopy, X‐ray photoelectron spectroscopy, TGA, X‐ray diffraction, UV–visible, scanning electron microscopy, X‐ray energy dispersion spectroscopy and FT‐IR were employed to characterize the synthesized nanocatalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

Hairy polymeric nanocapsules with ph‐responsive shell and thermoresponsive brushes: Tunable permeability for controlled release of water‐soluble drugs

The hairy poly(methacrylic acid‐co‐divinylbenzene)‐g‐poly(N‐isopropylacrylamide) (P(MAA‐co‐DVB)‐g‐PNIPAm) nanocapsules with pH‐responsive P(MAA‐co‐DVB) inner shell and temperature‐responsive PNIPAm brushes were prepared by combined distillation–precipitation copolymerization and surface thiol‐ene click grafting reaction using 3‐(trimethoxysilyl)propyl methacrylate‐modified silica (SiO₂‐MPS) nanospheres as a sacrificial core material. The well‐defined PNIPAm was synthesized by a reversible addition fragmentation chain transfer (RAFT) polymerization. The chain end was converted to a thiol by chemical reduction. The PNIPAm was integrated into the nanocapsules via thiol‐ene click reaction. The surface thiol‐ene click reaction conduced to tunable grafting density of PNIPAm brushes. The grafting densities decreased from 0.70 chains nm^?2 to 0.15 chains nm^?2 with increasing the molecular weight of grafted PNIPAm chains. Using water soluble doxorubicin hydrochloride (DOX·HCl) as a model molecular, the tunable shell permeability of the nanocapsule was investigated in detail. The permeability constant can be tuned by controlling the thickness of the P(MAA‐co‐DVB) inner shell, the grafting density of PNIPAm brushes, and the environmental pH and temperature. The tunable shell permeability of these nanocapsules results in the release of the loaded guest molecules with manipulable releasing kinetics. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2202–2216     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystallographic Evidence for Direct Metal–Metal Bonding in a Stable Open‐Shell La2@Ih‐C80 Derivative

Endohedral metallofullerenes (EMFs) have novel structures and properties that are closely associated with the internal metallic species. Benzyl radical additions have been previously shown to form closed‐shell adducts by attaching an odd number of addends to open‐shell EMFs (such as Sc₃C₂@I_h‐C₈₀) whereas an even number of groups are added to closed‐shell EMFs (for example Sc₃N@I_h‐C₈₀). Herein we report that benzyl radical addition to the closed‐shell La₂@I_h‐C₈₀ forms a stable, open‐shell monoadduct instead of the anticipated closed‐shell bisadduct. Single‐crystal X‐ray diffraction results show the formation of a stable radical species. In this species, the La?La distance is comparable to the theoretical value of a La?La covalent bond and is shorter than reported values for other La₂@I_h‐C₈₀ derivatives, providing unambiguous evidence for the formation of direct La?La bond.     

Surface modification of polystyrene latex particles via atom transfer radical polymerization

The atom transfer radical polymerization (ATRP) technique using the copper halide/ N,N′,N′,N″,N″‐pentamethyldiethylenetriamine complex was applied to the graft polymerization of methyl methacrylate and methyl acrylate on the uniform polystyrene (PS) seed particles and formed novel core‐shell particles. The core was submicron crosslinked PS particles that were prepared via emulsifier‐free emulsion polymerization. The crosslinked PS particles obtained were transferred into the organic phase (tetrahydrofuran), and surface modification using the chloromethylation method was performed. Then, the modified seed PS particles were used to initiate ATRP to prepare a controlled poly(methyl methacrylate) (PMMA) and poly(methyl acrylate) (PMA) shell. The final core‐shell particles were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and elementary analysis. The grafting polymerization was conducted successfully on the surface of modified crosslinked PS particles, and the shell thickness and weight ratio (PMMA and PMA) of the particles were calculated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 892–900, 2002; DOI 10.1002/pola.10160     

Modulating Guest Uptake in Core–Shell MOFs with Visible Light

A two‐component core–shell UiO‐68 type metal–organic framework (MOF) with a nonfunctionalized interior for efficient guest uptake and storage and a thin light‐responsive outer shell was prepared by initial solvothermal MOF synthesis followed by solvent‐assisted linker exchange. The bulky shell linker features two tetra‐ortho‐fluorinated azobenzene moieties to exploit their advantageous photoisomerization properties. The obtained perfect octahedral MOF single crystals can be switched repeatedly and with an unprecedented efficiency between E‐ and Z‐rich states using visible light only. Due to the high photoswitch density per pore of the shell layer, its steric demand and thus molecular uptake (and release) can be conveniently modulated upon green and blue light irradiation. Therefore, the “smart” shell acts as a light‐controlled kinetic barrier or “gate” for the diffusion of cargo molecules in and out of the MOF crystals.