Liquid phase bromination of aromatics over zeolite H-beta catalyst

The liquid phase bromination of chlorobenzene, toluene and xylenes (o-, m-, p-) is catalyzed using zeolite as catalyst and N-bromosuccinimide (NBS) as the brominating agent. In addition, the bromination of toluene has been investigated over various zeolites using both NBS and liquid Br₂ as brominating agents. A comparison under similar reaction conditions with H₂SO₄, in the absence of catalyst and FeCl₃ (in the case of toluene) is also investigated for each reaction. Zeolite H-beta is found to be selective compared to the conventional catalysts and other zeolites in the bromination of chlorobenzene and toluene whereas selectivity for 4-bromo-o-xylene (4-BOX/3-BOX) over H-beta and H₂SO₄ was found nearly comparable in the bromination of o-xylene. In the bromination of toluene, acidic H-beta favours the formation of nuclear products whereas in the absence of any catalyst, in the presence of weakly acidic H–Y and potassium exchanged zeolites K-beta and K–L, the concentration of side-chain product, œ-bromotoluene, is enhanced. The conversion of NBS, rate of NBS conversion (mmol g⁻¹ h⁻¹) and selectivity for products are strongly influenced by the reaction parameters. As the reaction time, catalyst amount, reaction temperature and molar ratios of NBS/toluene are increased, an increase in the conversion of NBS is noticed. Presumably, the catalytic bromination of aromatics proceeds by an electrophile (Br⁺) which is generated by the heterolytic cleavage of NBS/Br₂ by an acidic zeolite. Thus, the generated Br⁺ attacks the aromatic ring resulting in the formation of brominated nuclear products.     

Vapour—liquid equilibrium of the systems of methyl isobutyl ketone with chlorobenzene, o-dichlorobenzene, bromobenzene and p-xylene

Boiling temperatures were measured for four binary systems of methyl isobutyl ketone (4-methyl-2-pentanone) with chlorobenzene, o-dichlorobenzene, bromobenzene and p-xylene at 300, 500 and 700 mmHg. The data were correlated using the Wilson equation.     

Separation of p-xylene from multicomponent vapor mixtures using tubular MFI zeolite mmbranes

MFI zeolite membranes have been synthesized on tubular -alumina substrates to investigate the separation of p-xylene (PX) from m-xylene (MX) and o-xylene (OX) in binary, ternary, and simulated multicomponent mixtures in wide ranges of feed pressure and operating temperature. The results demonstrate that separation of PX from MX and OX through the MFI membranes relies primarily on shape-selectivity when the xylene sorption level in the zeolite is sufficiently low. For an eight-component mixture containing hydrogen, methane, benzene, toluene, ethylbenzene, PX, MX, and OX, a PX/(MX + OX) selectivity of 7.71 with a PX flux of 6.8 × 10⁻⁶ mol/(m² s) was obtained at 250 °C and atmospheric feed pressure. The addition of a small quantity of nonane to the multicomponent mixture caused drastic decreases in the fluxes of aromatic components and the PX separation factor because of the preferential adsorption of nonane in the zeolite channels. The nanoscale intercrystalline pores also caused serious decline in the PX separation factor. A new method of online membrane modification by carbonization of 1,3,5-triisopropylbenzene in the feed stream was found to be effective for reducing the intercrystalline pores and improving the PX separation.     

Influence of temperature on thermodynamics of ethers + xylenes

The densities and ultrasonic velocity of the binary mixtures methyl tert-butyl ether (MTBE) or ethyl tert-butyl ether (ETBE) + (o-xylene, m-xylene and p-xylene) at the range 288.15–323.15 K and atmospheric pressure, have been measured over the whole concentration range. The experimental excess volumes and deviation of isentropic compressibilities data have been analyzed. The experimental values have been studied in terms of different theoretical models. The gathered data improve open literature related to gasoline additives, as the comparison has proved, and help to understand the ether effect into aromatic environment in terms of steric hindrance and oxygen group polar potency.     

Synthesis and characterization of dinuclear p-, m- and o-xylyl bridged complexes of molybdenum and tungsten. The crystal structures of μ-p-xylyl- bis(η-pentamethyl-cyclopentadienyltri- carbonylmolybdenum) and μ-m-xylyl-bis(η- pentamethylcyclopentadienyltricarbonyltungsten)

The reactions of η⁵-Cp^*M(CO)₃Na (M = Mo, W) with ,′-p-, m- and o-dichloro-xylenes yielded p-, m- and o-xylyl bridged dinuclear complexes of η⁵-Cp^*M(CO)₃ in high yields. All of such new complexes are stable to air and water, even stable in dilute acids and bases.     

The photoreactions of some aryl esters Photo-Fries rearrangement vs photodecarboxylation—substituent and solvent effects

A number of substituted phenyl acetates have been irradiated by UV light. The reactions observed are: (1) cleavage of the O-acyl bond, leading to phenols, (2) photo-Fries rearrangements, leading to toluene derivatives. Methoxy substituents at the o- and/or p-positions were found to be displaced by the acyl moiety. The decarboxylation reaction is considerably enhanced by substitution at the o- and/or m-positions. In i-propanol and in cyclohexane no (or hardly any) decarboxylation is observed. In ether, however, the decarboxylation is pronounced. All these reactions proceed from the same excited state, the first excited singlet.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

The effect of nitrobenzene and aminobenzoic acids on the hydration of tricalcium silicate: a conduction calorimetric study

The hydration of tricalcium silicate (C₃S) in the presence of 0.004, 0.008 and 0.016 mol.% (with respect to 100 g of the silicate) of benzole acid, o-, m- and p-nitrobenzoic and aminobenzoic acids, was followed by conduction calorimetry. Benzoic acid at 0.004 and 0.008 moles behaved as a delayed accelerator of hydration, whereas at a dosage of 0.016 moles it performed as an accelerator by decreasing the onset of the induction period and promoting the earlier appearance of the main exothermic peak. The m- and p-nitrobenzoic acids accelerated the hydration of C₃S, whereas o-nitrobenzoic acid acted as a retarder. Both m-and p-aminobenzoic acids retarded the hydration by delaying the appearance of the main exothermal peak. o-Aminobenzoic acid showed a similar effect to that of the reference at early times by not affecting the induction period and the maximum rate-of-heat peak. However, it increased slightly the amplitude of the main exothermic peak. The compounds that promoted the appearance of a heat peak at periods of 1 h or earlier exhibited an acceleration effect. In the presence of retarders this peak did not appear.     

Systematische untersuchungen über das verhalten von organozinnverbindungen gegenüber flüssigem schwefeldioxid II. Reaktionen von arylstannanen mit flüssigem SO2

The behaviour of tetraarylstannanes, R₄Sn (R = C₆H₅CH₂, C₆H₅, o-, m-, p-CH₃C₆H₄), towards SO₂ under various conditions has now been studied in detail. Compared to aliphatic tetraorganostannanes, the variability of the reaction products is much less, so that in nearly all cases only disulfinates, R₂Sn(O₂SR)₂, are formed. The aromatic tin(IV) mono-, di- and tri-sulfinates are also obtained by metathetical reaction between the corresponding organotin halides and sodium sulfinates. A unique feature of triaryltin chlorides, R₃SnCl (R = C₆H₅, o-, m-, p-CH₃C₆H₄), is their disproportionation in liquid SO₂ leading to disulfinates, R₂Sn(O₂SR)₂, and dichlorides, R₂SnCl₂. (p-CH₃C₆H₄)₂SnCl₂, under more efficient conditions, also accepts SO₂ forming (p-CH₃C₆H₄SO₂)₂SnCl₂. The structural investigations of the newly prepared compounds are carried out on the basis of their IR and ¹H NMR spectra.     

柚子皮生物炭质用于河水中苯系物的固相微萃取

苯、甲苯、乙苯和二甲苯(邻二甲苯、间二甲苯、对二甲苯)组成的苯系物(BTEX)是炼油厂和石化厂等工业园区普遍制造和排放的碳氢化合物,具有一定的毒性和致癌作用,对生态环境和人类健康造成极大威胁。研究以低成本、绿色且富含木质素和含氧官能团的柚子皮作为植物原料,在有限氧条件下采用程序升温热解法制备了柚子皮生物炭质吸附剂,通过N₂吸附-脱附等温线和孔径分布图对不同热解温度下制备的柚子皮生物炭质吸附剂的孔隙结构进行了考察。结果表明:在1000 ℃热解温度下制得的柚子皮生物炭质具有更高的比表面积(749.9 m²/g)、更大的孔体积(0.42 cm³/g)、更集中的孔径分布(2~3 nm)。将吸附剂通过溶胶-凝胶法(sol-gel)涂覆在铁丝上制成固相微萃取纤维,与气相色谱-火焰离子化检测器(GC-FID)相结合,对影响萃取和分离BTEX的条件进行优化,建立了用于BTEX检测的高灵敏度分析方法。方法具有检出限低(0.004~0.032 μg/L)、线性范围宽(1~100 μg/L)、线性关系好、萃取效率高(约为商品化涂层聚二甲基硅氧烷(7 μm)的2.9~18.3倍)等优势。此外,应用该方法已成功在河水样本中检测出了乙基苯(4.80 μg/L),邻二甲苯(3.00 μg/L)和对二甲苯、间二甲苯(2.46 μg/L)。最后将该方法应用于河水样本的加标试验中,得到了满意的回收率(75.7%~117.6%)。实验结果表明所建立的分析方法可实现对环境水样(河水)中BTEX的低成本、高灵敏度检测。     

Vapour-liquid equilibria in nonpolar mixtures : II. Carbon tetrachloride with alkylbenzenes and n-alkanes at 313.15 K

Góral, M. and Zawadzki, S., 1993. Vapour-liquid equilibria in nonpolar mixtures. II. Carbon tetrachloride with alkylbenzenes and n-alkanes at 313.15 K. Fluid Phase Equilibria, 90: 355-364.

Total vapour pressure measurements using a modified static method at 313.15 K are reported for binary mixtures of CCl₄ with benzene, toluene, o-xylene, p-xylene, hexane, heptane, octane, nonane and decane. The results were correlated with the generalized Redlich-Kister equation for excess Gibbs energy. A comparison with literature vapour-liquid equilibrium data and excess enthalpy was made. Consistency within homologous series was checked. Predictions made using the UNIFAC method and the Hildebrand-Scatchard equation were compared.     

New synthetic method to 1,2-benzisothiazoline-3-one- 1,1-dioxides and 1,2-benzisothiazoline-3-one-1-oxides from N-alkyl(o-methyl) arenesulfonamides

Various N-alkylsaccharins were easily prepared in moderate to good yields by the reaction of N-alkyl(o-methyl)arenesulfonamides with (diacetoxyiodo)benzene in the presence of iodine under irradiation with a tungsten lamp (W-hν). On the other hand, irradiation of N-alkyl(o- methyl)arenesulfonamide derivatives bearing various subslituents on the aromatic ring with a high- pressure mercury lamp (Hg-hν), in the presence of (diacetoxyiodo)benzene and iodine gave the corresponding N-alkyl-1,2-benzisothiazoline-3-one-1-oxide derivatives in moderate yields, together with N-alkyl-1,2-benzisothiazoline-3-one-1,1-dioxide (saccharin) derivatives.     

Low energy electron beam treatment of VOCs

Research on electron beam decomposition of volatile organic compounds (VOCs) in air was carried out to establish an advanced treatment technology for industrial off-gases. Benzene, toluene and o-xylene were selected as aromatic VOCs and dichloro-, trichloro- and tetrachloro-ethylene as chloroethenes. The experimental results showed that G-values of decomposition ranged from 1.0–2.2 in aromatic compounds and 30–60% of decomposed compounds were converted into aerosols. On the other hand, G-values of decomposition of chloroethenes increased with the initial concentration and number of chlorine atoms in a molecule, for example, the G-value at 180 and 1580 ppm of tetrachloroethylene were 22 and 172, respectively. The formation of aerosol was not observed in the decomposition of chloroethenes. An application of low energy electron accelerator for treatment of exhaust gases containing VOCs was also discussed.     

Boiling points for five binary systems of sulfolane with aromatic hydrocarbons at 101.33 kPa

Boiling points have been determined at 101.33 kPa for the binary mixtures of sulfolane+o-xylene, sulfolane+m-xylene, sulfolane+p-xylene, sulfolane+ethylbenzene and sulfolane+1,2,4-trimethylbenzene. Calculations of the non-ideality of the vapor phase were made with the second virial coefficients evaluated from the Hayden–O’Connell method. The binary parameters for five activity coefficient models (Margules, van Laar, Wilson, NRTL and UNIQUAC) have been fitted with the experimental boiling points measured in this work. A comparison of model performances has been carried out using the criterion of the average absolute deviations in boiling point. The activity coefficient of the component in the liquid phase is discussed based on the UNIFAC model with the consideration of the dipole–dipole interactions.     

Excess molar volumes and enthalpies for the binary systems propyl propanoate + o-xylene, m-xylene, and p-xylene at 298.15 K

This paper reports excess molar enthalpies, H_m^E, and excess molar volumes, V_m^E, of the binary systems {propyl propanoate + o-xylene}, {propyl propanoate + m-xylene} and {propyl propanoate + p-xylene} at the temperature 298.15 K and atmospheric pressure, over the whole composition range. V_m^E was calculated from the experimental measurement of the corresponding densities, while H_m^E was measured directly. The excess magnitudes were correlated to a Redlich-Kister type equation. Finally, we will discuss the results of the three mixtures studied here and by comparison with other binary systems containing propyl propanoate and a benzene-based compound previously published.     

Excess volumes of binary mixtures of anisole with bromobenzene, o-dichlorobenzene, o-chloroaniline and p-dioxane at 298.15, 303.15, 308.15 and 313.15 K

Excess molar volumes, V^E, and partial molar volumes, _i, have been calculated for binary liquid mixtures of anisole with bromobenzene, o-dichlorobenzene, o-chloroaniline and p-dioxane from the results of densities measured at 298.15, 303.15, 308.15 and 313.15 K over the entire range of composition. In the temperature interval studied the values of V^E are positive for anisole + p-dioxane, anisole + bromobenzene and anisole + o-dichlorobenzene, whereas negative values are observed for anisole + o-chloroaniline. The negative V^E for the latter system was due to specific interactions between mixing components. The positive V^E for the remaining systems was ascribed to the dispersion-type interactions.     

多孔有机笼毛细管电色谱手性柱的制备及应用

多孔有机笼(POCs)是一种新型的具有稳定有序三维空腔结构的多孔材料。通过2-羟基-1,3,5-均苯三甲醛与1R,2R-1,2-二苯基乙二胺发生席夫碱的缩合反应,合成了一种具有羟基功能基团的单一手性POCs材料;将其均匀涂敷在毛细管壁上制成色谱柱,利用电色谱柱成功拆分了二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺4种手性化合物。探究了分离电压、缓冲溶液浓度及其pH值等因素对手性拆分的影响,获得了4种手性物质在POCs色谱柱上的最佳拆分条件。实验研究表明,二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺获得优化分离效果所需的工作电压分别为13、14、14和12 kV;二氢黄酮适宜Tris-H₃PO₄缓冲溶液浓度为0.075 mol/L,吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺适宜Tris-H₃PO₄缓冲溶液浓度为0.100 mol/L; 4种手性物质得到最佳分离效果时的pH值均为3.51。二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺均达到基线分离,分离度分别为2.99、2.10、2.58和3.59。该POCs色谱柱还成功拆分了o,m,p-碘苯胺、o,m,p-硝基苯胺两种位置异构体。该研究表明POCs手性电色谱柱具有良好的手性识别能力,是一种优秀的手性分离材料,具有很大的电色谱手性分离应用前景。     

Substituent effects on the frontier molecular orbitais of aryl isonitriles

An investigation of the frontier molecular orbitais ofo- and p-RC₆H₄NC (R=H, CH₃, NO₂, F, Cl, CF₃, OCH₃) was carried out so that a thorough understanding of the intricacies of σ donation and π acceptance could be developed and used to modify subtly the electron density on metal centers. The results of this study-Indicate that the substituent position (ortho vs. para ) does alter the electron density in the ligand appreciably and that substitution of the phenyl ring with the groups indicated has a smaller effect on the σ-donating ability than it does on the π-accepting ability of the isonitrile ligand.

The π-accepting abilities of the isonitrile ligands increase in the order o-, p-CH₃OC₆H₄NC, o-, p-CH₃C₆H₄NC, o-, p-C₆H₅NC, o-, p-FC₆H₄NC, o-, p-CF₃C₆NC, o-, p-ClC₆H₄NC, o-, p-NO₂C₆H₄NC while the σ-donating ability decreases in this order. The energies of the σ-donor and π-acceptor orbitais are shown to correlate well with observed E values of Cr(RC₆H₄NC)₆ and Mn(RC₆H₄NC)₆⁺¹ complexes. This demonstrates how the theoretical results can be useful in understanding the observed physical properties of isonitrile-metal complexes.     

Laser-induced fluorescence, dispersed fluorescence and lifetime measurements of jet-cooled chloro-substituted benzyl radicals

We measured the laser-induced fluorescence (LIF) and dispersed fluorescence (DF) spectra of jet-cooled -, o- and m-chlorobenzyl radicals after they were generated by the 193 nm photolysis of the corresponding parent molecules. The vibronically resolved spectra were obtained to analyze their D₁–D₀ transitions. The fluorescence lifetimes of -, o-, m- and p-chlorobenzyls in the zeroth vibrational levels of the D₁ states were measured to estimate the oscillator strengths of a series of benzyl derivatives. It was found that the -substitution is inefficient to break the ‘accidental forbiddenness' of the D₁–D₀ transition of benzyl, while the ring-substitution enhances the oscillator strength by 50%.     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.