Synthesis of cationic indenyl- and fluorenyl-arene complexes of ruthenium

Interaction of [Ru(-C ₆ H ₆ )Cl ₂ ] ₂ with indenyl- or fluorenyllithium in THF gives, together with cationic benzene complexes [Ru( ⁵ -C ₉ H ₇ )(-C ₆ H ₆ )]⁺ and [Ru( ⁵ -C ₁₃ H ₉ )(-C ₆ H ₆ )]⁺, the neutral cyclohexadienyl derivatives Ru( ⁵ -C ₉ H ₆ -C ₉ H ₇ ) and Ru( ⁵ -C ₁₃ H ₉ )( ⁵ -C ₆ H ₆ -C ₁₃ H ₉ ), respectively. Interaction of the cyclohexadienyl complexes with Al ₂ O ₃ , Ph ₃ C⁺, and CF ₃ CO ₂ H has been studied. Reaction of Ru( ⁵ -C ₁₃ H ₉ )( ⁵ -C ₆ H ₇ ) with CF ₃ CO ₂ H in the presence of an arene yields cationic cyclohexadienylarene complexes: [Ru( ⁵ -C ₁₃ H ₉ )( ⁶ -arene)]⁺ (arene=C ₆ H ₆ or 1,3,5-Me ₃ C ₆ H ₃ ).A. N. Nesmeyanov Institute of Organoelemental Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 699–706, March, 1992.     

Synthesis of functional polyolefins using cationic bisphosphine monoxide-palladium complexes

The copolymerization of ethylene with polar vinyl monomers, such as vinyl acetate, acrylonitrile, vinyl ethers, and allyl monomers, was accomplished using cationic palladium complexes ligated by a bisphosphine monoxide (BPMO). The copolymers formed by these catalysts have highly linear microstructures and a random distribution of polar functional groups throughout the polymer chain. Our data demonstrate that cationic palladium complexes can exhibit good activity for polymerizations of polar monomers, in contrast to cationic α-diimine palladium complexes (Brookhart-type) that are not applicable to industrially relevant polar monomers beyond acrylates. Additionally, the studies reported here point out that phosphine-sulfonate ligated palladium complexes are no longer the singular family of catalysts that can promote the reaction of ethylene with many polar vinyl monomers to form linear functional polyolefins.     

Synthesis of some zerovalent complexes of iron via aryldiazenato cationic complexes

Bis (triphenylphosphine) dicarbonylaryldiazenato-iron, [Fe⁰ (ArN₂) (CO)₂ (PPh_s)₂]+(I), reacts in a solution of LiOEt under nitrogen atmosphere, with a variety of group V donor ligands, substituting the aryldiazenato ligand, ArN₂+. The effect of substitution on the stretching frequency of CO is discussed.     

Synthesis of sulfone-containing monomers and polymers using cationic cyclopentadienyliron complexes

The synthesis of sulfone-containing monomers with pendent cationic cyclopentadienyliron (CpFe⁺) moieties has been accomplished via nucleophilic aromatic substitution of dichloroarene complexes with a number aliphatic dithiols. These complexes were further oxidized using m-CPBA to give the sulfone-based monomers. Polymerization of the sulfone-based monomers with O-containing nucleophiles produced the sulfone-based polymers. Direct nucleophilic aromatic substitution of dichloroarene complexes with dinucleophiles allowed for the formation of organoiron sulfide-based polymers. Oxidation of these polymers led to the formation of sulfone polymers with the pendent iron moieties. The organometallic monomers and polymers were found to be more soluble in polar solvents in comparison to their organic analogues.     

Synthesis of neutral and cationic monocyclopentadienyl alkyl niobium and tantalum complexes

Compound [NbCp′Me₄] (Cp′ = η⁵-C₅H₄SiMe₃, 1) reacted with several ROH compounds (R = tBu, SiiPr₃, 2,6-Me₂C₆H₃) to give the derivatives [NbCp′Me₃(OR)] (R = tBu 2a, SiiPr₃2b, 2,6-Me₂C₆H₃2c). The diaryloxo tantalum compound [TaCp^∗Me₂(OR)₂] (Cp^∗ = η⁵-C₅Me₅, R = 2,6-Me₂C₆H₃3) was obtained by reaction of [TaCp^∗Cl₂Me₂] with 2 equiv of LiOR (R = 2,6-Me₂C₆H₃). Abstraction of one methyl group from these neutral compounds 1-3 with the Lewis acids E(C₆F₅)₃ (E = B, Al) gave the ionic derivatives [NbCp′Me₂X][MeE(C₆F₅)₃] (X = Me 4-E. X = OR; R = SiiPr₃5b-E, 2,6-Me₂C₆H₃5c-E. E = B, Al) and [TaCp^∗Me(OR)₂][MeE(C₆F₅)₃] (R = 2,6-Me₂C₆H₃6-E; E = B, Al). Polymerization of MMA with the aryloxoniobium compound 2c and Al(C₆F₅)₃ gave syndiotactic PMMA in a low yield, whereas the tetramethylniobium compound 1 and the diaryloxotantalum derivative 3 were inactive.     

Synthesis and structures of the first cationic perfluoroaryllanthanoid(II) complexes

Tetraphenylborate salts of solvated pentafluorophenyllanthanoid(II) cations [Ln(C(6)F(5))(thf)(n)](+) (Ln=Eu, n=6 (1); Ln=Yb, n=5 (2)) were readily synthesized in high yield by reactions of ytterbium or europium with HgPh(C(6)F(5)) and Me(3)NHBPh(4) in THF. The structures of 1.THF and 2 confirmed the existence of well-separated ions and both 1 and 2 show notable thermal stability at room temperature. The cation in 2 was also observed in the remarkable mixed-valent complex [Yb(II)(C(6)F(5))(thf)(5)][Yb(III)(C(6)F(5))(2)[N(SiMe(3))(2)](2)] (3), fortuitously isolated in low yield from a reaction of ytterbium metal, HgPh(C(6)F(5)), and HN(SiMe(3))(2) in THF, and which additionally has an unusual bis(pentafluorophenyl)bis[bis(trimethylsilyl)amido)]ytterbate(III) anion. (171)Yb-(19)F coupling has been observed in the low-temperature (171)Yb NMR spectra of 2 and [Yb(C(6)F(5))(2)(thf)(4)].     

Synthesis,characterization and catalytic properties of cationic N-heterocyclic carbene silver complexes

Three new dibenzimidazolium salts bridged by 2-methylenepropane-1,3-diyl group were synthesized. Their dinuclear N-heterocyclic carbene Ag(I) complexes were prepared by the reactions of these salts with Ag₂O. The structures of the synthesized compounds were defined by nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), elemental analysis, and LC-MSMS (for complexes) techniques. Stability of the silver complexes was confirmed by ¹H NMR spectroscopy. Catalytic activities of Ag(I) compounds were tested for three-component coupling reaction of some aldehydes, amines, and phenylacetylene.     

Manganese cationic pyrazolylamidino complexes

The reactions of fac-[MnBr(CO)₃(NHC(CH₃)pz^∗-κ²N,N)] (pz^∗ = pz, dmpz; pzH = pyrazole; dmpzH = 3,5-dimethylpyrazole) with wet AgBF₄ in a 1:1 ratio lead to the cationic pyrazolylamidino complexes fac-[Mn(OH₂)(CO)₃(NHC(CH₃)pz^∗-κ²N,N)]BF₄. The aquo ligand is readily substituted by 2,6-xylylisocyanide (CNXyl) to give fac-[Mn(CNXyl)(CO)₃(NHC(CH₃)pz^∗-κ²N,N)]BF₄. The pyrazole complexes fac-[Mn(pz^∗H)(CO)₃(NHC(CH₃)pz^∗-κ²N,N)]BF₄ are obtained by treating fac-[MnBr(CO)₃(NCMe)₂] with AgBF₄ and then with pyrazole (pzH or dmpzH), in a 1:1:2 ratio. A similar reaction using 1:1:1 ratio and AgClO₄ leads to the acetonitrile complexes fac-[Mn(NCMe)(CO)₃(NHC(CH₃)pz^∗-κ²N,N)]ClO₄. The X-ray structures of the complexes show moderate hydrogen bonds interactions between the N-bond hydrogen of the pyrazolylamidino ligand and the anion. In the aquo complex, one of the hydrogens of the coordinated water molecule is also involved in a hydrogen bond.     

Synthesis of cationic carbonyl complexes of manganese(I) with bidentate ligands

Summary Bidentate ligands can readily replace acetone in thefac-[Mn(CO)₃(chel)(OCMe₂)]⁺ complexes or the perchlorate group fromfac-[Mn(CO)₃(chel)(OClO₃)] yieldingfac-[Mn(CO)₃(chel)(L-L)]⁺ or [{fac-Mn(CO)₃(chel)}₂(L-L)]²⁺ [chel = 1,10-phenanthroline (phen), 2,2-bipyridine (bipy), 1,2-bis(diphenylphosphine)ethane (dpe); L-L = bis(diphenylphosphine)methane (dpm), dpe, 1,4-bis(diphenylphosphine)butane (dpb), succinonitrile (suc), and glutaronitrile (glu)]. Some of these mononuclear complexes are precursors for binuclear complexes which are linked by bridging phosphines or nitriles.     

Synthesis of macrocyclic polyethers and polyether diesters and preparation of their cationic complexes

New macrocyclic polyethers, 2,3,5,6-bis-[5′(5′)-chlorobenzo]-1,7,10-trioxacyclododeca-2,5-diene (I), 2,3,5,6-bis-[5′(5′)-chlorobenzo]-1,7,10,13-tetra oxacyclo pentadeca-2,5-diene (II), and 2,3,5,6-bis-[5′(5′)-chlorobenzo]-1,7,10,13,16-penta oxa cyclo octadeca-2,5-dien (III), and macrocylic lactones 2,3,5,6-bis-[5′(5′)-chlorobenzo]-1,7,10,13-tetraoxacyclopentadeca-2,5-diene-8,15-dione (IV) and 2,3,5,6-bis[5′(5′)-chlorobenzo]-1,7,10,13,16-pentaoxacyclooctadeca-2,5-diene-8,18-dione (V) were synthesized. Complexes of ligands III and V with metal cations were prepared. Furthermore, their metal-picrate extraction with some metal salts was attempted. Structures of the ligands and complexes were confirmed using spectroscopic techniques.     

Synthesis and structure of neutral and cationic pentahaloarylpalladium(II) isonitrile complexes

Complexes of the types (a) trans- and cis-[Pd(C₆X₅)₂ (CNR)₂], (b) trans- [Pd(C₆X₅)Cl(CNR)₂] and (c) [Pd(C₆X₅)(CNR)₃]ClO₄ (X = F or Cl;R = Bu^t cyclohexyl or p-tolyl) have been made by replacement of the tetrahydrothiophen or Cl groups of appropriate precursors by isonitrile. Their structures have been assigned on the basis of their IR and ¹H NMR spectra.     

Synthesis and antitumor activity of DNA binding cationic porphyrin-platinum(II) complexes

A new series of DNA binding 5,10,15-tri(N-methyl-4-pyridiniumyl)porphyrin (TrisMPyP)-platinum(II) conjugates was synthesized, in which different spacer ligands were used for appropriate coordination to platinum(II) complexes. Compound 9b exhibited in vivo antitumor activity (T/C%, 294) superior to cisplatin (T/C%, 184) against the leukemia L1210 cell line.     

Synthesis of cationic gold(III) complexes using iodine(III)

Abstract

We report the synthesis and characterization of cationic Au(III) complexes supported by nitrogen-based ligands. The syntheses are achieved by reacting Au(I) complexes [Au(N-Me-imidazole)₂]⁺ and [Au(pyridine)(NHC)]⁺ with iodine(III) reagents PhI(OTf)(OAc) and [PhI(pyridine)₂]²⁺ yielding a series of cationic gold(III) complexes. In contrast, reactions of phosphine ligated gold(I) complexes with iodine(III) reagents results in the oxidation of the phosphine ligand.