离子色谱-等离子体质谱联用测定热泉水样的砷形态

利用阴离子色谱与六极碰撞等离子体质谱联用的方法,在线同时测定水样的4种砷形态(As(Ⅴ),As(Ⅲ),MMA,DMA),并用于实际样品-热泉水中砷形态的测定.使用K2HPO4-KH2PO4为淋洗液等度淋洗,用Hamilton PRP-X100阴离子色谱柱分离,4种砷形态在7 min之内完全分离.调节淋洗液中K2HPO4与KH2PO4的比例可以优化峰的分离.地下水(含热泉水)基质、样品及淋洗液中的Cl-对砷形态的分离测定没有影响,淋洗液中的盐份在样品锥和截取锥上的积累对测定的影响很小.检出限分别为As(Ⅴ) 0.23 μg/L,As(Ⅲ) 0.30 μg/L,MMA 0.26 μg/L,DMA 0.54 μg/L.     

高效液相色谱-电感耦合等离子体质谱联用测定海洋产品中无机砷

采用高效液相色谱( HPLC)和电感耦合等离子体质谱(ICP-MS)联用技术测定了海洋产品中的无机砷.动物性和植物性海洋产品试样经过10％ H3PO溶液(V/V)提取,阴离子交换色谱分离,ICP-MS测定其中As(Ⅲ)和As(Ⅴ)的含量.实验结果表明As(Ⅲ)和As(Ⅴ)的检出限分别为5.0和8.0 μg/kg,线性范...     

磷酸超声提取大气颗粒物中砷的多种形态

以H<,3>PO<,4> 为提取剂,利用高效液相色谱与氢化物发生原子荧光光谱联用(HPLC-HG-AFS)实现了大气颗粒物中砷形态的温和提取测定,并通过标准样品的形态加标实验确定了最佳提取方法.在优化的色谱及光谱条件下,As(Ⅲ),As(Ⅴ),MMA(甲基胂酸)和DMA(二甲基胂酸)均可达基线分离,其方法检出限分别为1...     

阴/阳离子交换色谱-电感耦合等离子体质谱法分析鱼和贝类海产品砷的形态

采用阴(Hamilton PRP-X100柱)阳(Dionex Ionpac CS-10柱)离子交换色谱-电感耦合等离子体质谱联用技术,分别以pH 10.3的20 mmol/L NH4 HCO3和pH 2.0的5 mmol/L吡啶溶液为流动相,建立了三价砷As(Ⅲ)、五价砷As(Ⅴ)、一甲基砷酸(MMA)、二甲基砷酸(...     

HPLC-ICP-MS测定中药中砷的形态

报道了高效液相色谱-电感耦合等离子体质谱(HPLC-ICP-MS)联用技术测定中药中砷的形态.采用阴离子交换柱,以含0.2 mmol/L乙二胺四乙酸(EDTA)和2 mmol/L NaH2PO4的水溶液为流动相,pH 6.0,流速为1.0 mL/min,成功分离了亚砷酸(AsⅢ)、砷酸(AsⅤ)、甲基砷(MMA)和二甲基砷(DMA).检出限分别为0.67 μg/L (AsⅢ),0.85 μg/L (DMA),0.43 μg/L (MMA),0.70 μg/L (AsⅤ).中药样品经过(1 1)甲醇水溶液超声提取,离心、过滤、氮气吹干甲醇,超纯水定容.样品加标平均萃取回收率分别为: 92.8% (AsⅢ),108% (DMA),104% (MMA),101% (AsⅤ),RSD (n=7)均小于10%.     

高效色谱-电感耦合等离子体质谱法分析海藻类海产品中砷的形态

采用阴(Hamilton PRP-X100柱)阳(Dionex Ionpac CS-10柱)离子交换色谱-电感耦合等离子体质谱联用技术,分别以pH 10.3的20 mmol/L NH4HCO3和pH 2.0的5 mmol/L吡啶溶液为流动相,建立了As(Ⅲ)、As(Ⅴ)、一甲基砷酸(MMA)、二甲基砷酸(DMA)、砷甜菜碱AsB、砷糖PO4、砷糖OH、砷糖SO3、砷糖SO4砷形态的分析方法。采用微波消解法和超声溶剂提取法对不同海域10种紫菜和海带产品进行前处理,对As含量及其化学形态进行分析。实验表明,样品总砷的质量分数为1.7～38.7 mg/kg,样品萃取物中,As糖PO4和As糖OH为As的主要形态,其含量分别占可提取As的6.5%～67.7%和12.9%～86.2%,海带样品萃取物中还有As糖SO3和DMA被检测,其含量分别占可提取As的13.0%～52.1%和5.9%～17.4%。在紫菜和海带海藻类产品中,含As的化合物主要是毒性较低的有机砷。     

HPLC-HG-AFS测定大气颗粒物中砷的形态

采用高效液相色谱-氢化物发生原子荧光光谱联用测定了北京大气颗粒物中As(III),As(Ⅴ),二甲基砷酸(DMA)和一甲基砷酸(MMA)的含量。研究了仪器条件、流动相组成和梯度洗脱程序对砷形态分离的影响。实验结果显示,在优化的色谱与氢化原子荧光检测条件下,采用pH6.0,浓度为10 mmol/L和200 mmol/L NH4H2PO4为流动相A和B,在1~3 min内用60%的A和40%的B洗脱使砷的4种形态达到最佳分离效。As(III),As(Ⅴ),DMA和MMA的检出限为1.45,1.22,1.91和1.64 mg/L,回收率为90.5%~93.2%,相对标准偏差为0.38%~1.7%。方法适用于大气颗粒物中砷的形态分析研究。     

高效液相色谱-电感耦合等离子体质谱法测定烟草中砷的形态

应用高效液相色谱-电感耦合等离子体质谱联用技术(HPLC-ICP-MS)建立了烟草中As(Ⅲ)、As(V)、一甲基砷酸(MMA)和二甲基砷酸(DMA)4种砷形态的检测方法。研究了不同提取液、提取液体积以及提取时间对提取效果的影响,并对色谱条件进行优化。以15 mL甲醇-水(1∶1)混合液为提取液,30℃超声提取20 min,以(NH4)2HPO4(pH 6.0)为流动相,采用PRP-X100阴离子交换柱对砷形态进行分离。在0.1～25μg/L质量浓度范围内,4种砷形态的线性系数均不小于0.997,日内(n=5)和日间(n=3)RSD均不大于4.2%,仪器检出限为0.1～0.2μg/L,定量下限为0.2～0.5μg/L。在低、中、高3个加标水平下,砷的回收率均为83%～115%,方法稳定性较好,RSD不大于5.7%。采用该方法对国内外8种烟草中的4种砷形态含量进行分析,其含量从高到低依次为As(Ⅴ)、MMA、As(Ⅲ)和DMA。该方法准确、灵敏、方便,适用于烟草中砷形态的测定。     

巯基棉分离-化学发光法测定痕量价态砷

本文在建立的MoO_4~(2-)-I~--As(Ⅲ)-Luminol化学发光体系测定痕量As(Ⅲ)的基础上,利用巯基棉对As(Ⅲ)和As(Ⅴ)完全不同的吸附性能分离As(Ⅲ)和As(Ⅴ),首次建立了痕量价态砷的化学发光分析法,检测限达到4×10~(-10)gAs/ml。分离手续简便,分析速度快。应用于实际水样分析,回收率在97％～107％之间。     

离子色谱-双阳极电化学氢化物发生-原子荧光光谱法测定Ⅰ型牙髓失活材料中的砷形态

将自制的双阳极电化学氢化物发生器作为离子色谱与原子荧光光谱的联用接口,建立了离子色谱-双阳极电化学氢化物发生-原子荧光光谱法在线分析砷形态系统.最佳实验条件为淋洗液6.0 mmol/L NH4H2PO4(pH 6.20),电解液0.40 mol/L H2SO4,电解液流量为阳极4.0 mL/min,阴极 1.5 mL/min,电解电流密度0.50 A/cm.2,载气流量300 mL/min,屏蔽气流量500 mL/min,氢气流量80 mL/min.在优化的实验条件下,As(Ⅲ)、DMA、MMA的线性范围为5～200 μg/L、As(Ⅴ)的线性范围为10～200 μg/L,As(Ⅲ)、DMA、MMA和As(Ⅴ)检出限分别为3.04、4.27、3.97和9.30 μg/L(信噪比S/N=3).50 μg/L的As(Ⅲ)、DMA、MMA和As(Ⅴ)混合标准溶液平行进样7次,得到的色谱峰面积的相对标准偏差(RSD)分别为415%、3.08%、519%和3.62%.将该方法用于牙髓失活材料中的砷形态分析.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.