Preemptive multiprocessor order scheduling to minimize total weighted flowtime

Consider m identical machines in parallel, each of which can produce k different product types. There is no setup cost when the machines switch from producing one product type to another. There are n orders each of which requests various quantities of the different product types. All orders are available for processing at time t = 0, and preemption is allowed. Order i has a weight w_i and its completion time is the time when its last requested product type finishes. Our goal is to find a preemptive schedule such that the total weighted completion time ∑_wiCi$\sum w_i{C}_i$ is minimized. We show that this problem is NP-hard even when all jobs have identical weights and there are only two machines. Motivated by the computational complexity of the problem, we propose a simple heuristic and show that it obeys a worst-case bound of 2 − 1/m. Finally, empirical studies show that our heuristic performs very well when compared with a lower bound of the optimal cost.     

A multi-objective simulated-annealing algorithm for scheduling in flowshops to minimize the makespan and total flowtime of jobs

In this paper, we consider the problem of permutation flowshop scheduling with the objectives of minimizing the makespan and total flowtime of jobs, and present a Multi-Objective Simulated-annealing Algorithm (MOSA). Two initial sequences are obtained by using simple and fast existing heuristics, supplemented by the implementation of three improvement schemes. Each of the two resultant sequences corresponds to a possible non-dominated solution containing the minimum value of one objective function. These sequences, taken one at a time, are given as the starting sequences to the MOSA. The MOSA seeks to obtain non-dominated solutions through the implementation of a simple probability function that attempts to generate solutions on the Pareto-optimal front. The probability function selects probabilistically a particular objective function, considering which the algorithm uncovers non-dominated solutions. Moreover, the probability function is varied in such a way that the entire objective-function space is covered uniformly so as to obtain as many non-dominated and well-dispersed solutions as possible. The parameters in the proposed MOSA are determined after conducting a pilot study. Two variants of the proposed algorithm, called MOSA-I and MOSA-II, with different parameter settings with respect to the temperature and epoch length, are considered in the performance evaluation of algorithms. In order to evaluate MOSA-I and MOSA-II, we have made use of 90 benchmark problems provided by Taillard [Eur. J. Operation. Res. 64 (1993) 278]. After an extensive literature survey, the following flowshop multi-objective scheduling algorithms have been identified as benchmark procedures: (a) MOGLS (Multi-Objective Genetic Local Search) by Ishibuchi and Murata [IEEE Trans. Syst., Man, Cybernet. C: Appl. Rev. 28 (1998) 392]; (b) Elitist Non-dominated sorting Genetic Algorithm (ENGA) by Bagchi [Multi-Objective Scheduling by Genetic Algorithms, Kluwer Academic Publishers, 1999]; (c) GPW (Gradual Priority Weighting) approach by Chang, Hsieh and Lin [Int. J. Prod. Econ. 79 (2002) 171]; and (d) a posteriori approach based heuristic by Framinan, Leisten and Ruiz-Usano [Eur. J. Operation. Res. 141 (2002) 559]. The non-dominated sets obtained from each of the existing benchmark algorithms and the proposed MOSA-I and MOSA-II are compared, and subsequently combined to obtain a net non-dominated front. It is found that most of the solutions in the net non-dominated front are yielded by MOSA-I and MOSA-II. In addition, it is noteworthy that both MOSA-I and MOSA-II require less computational effort than the MOGLS, ENGA and GPW.     

Two-machine flowshop scheduling to minimize the number of tardy jobs

We consider the two-machine flowshop problem with the objective of minimizing the total number of tardy jobs. Since this problem is known to be strongly NP-hard, algorithms are described for four polynomially solvable special cases. In addition, several heuristic algorithms are developed to find optimal or near optimal schedules. Results of computational tests in solving problems up to 60 jobs are reported and directions for future research are provided.     

Branch-and-bound algorithms for scheduling in permutation flowshops to minimize the sum of weighted flowtime/sum of weighted tardiness/sum of weighted flowtime and weighted tardiness/sum of weighted flowtime,weighted tardiness and weighted earliness of jobs

The problem of scheduling in permutation flowshops is considered in this paper with the objectives of minimizing the sum of weighted flowtime/sum of weighted tardiness/sum of weighted flowtime and weighted tardiness/sum of weighted flowtime, weighted tardiness and weighted earliness of jobs, with each objective considered separately. Lower bounds on the given objective (corresponding to a node generated in the scheduling tree) are developed by solving an assignment problem. Branch-and-bound algorithms are developed to obtain the best permutation sequence in each case. Our algorithm incorporates a job-based lower bound (integrated with machine-based bounds) with respect to the weighted flowtime/weighted tardiness/weighted flowtime and weighted tardiness, and a machine-based lower bound with respect to the weighted earliness of jobs. The proposed algorithms are evaluated by solving many randomly generated problems of different problem sizes. The results of an extensive computational investigation for various problem sizes are presented. In addition, one of the proposed branch-and-bound algorithms is compared with a related existing branch-and-bound algorithm.     

Single machine scheduling to minimize total weighted earliness subject to minimal number of tardy jobs

Motivated by just-in-time manufacturing, we consider a single machine scheduling problem with dual criteria, i.e., the minimization of the total weighted earliness subject to minimum number of tardy jobs. We discuss several dominance properties of optimal solutions. We then develop a heuristic algorithm with time complexity O(n³) and a branch and bound algorithm to solve the problem. The computational experiments show that the heuristic algorithm is effective in terms of solution quality in many instances while the branch and bound algorithm is efficient for medium-size problems.     

Hybrid genetic algorithm for permutation flowshop scheduling problems with total flowtime minimization

In this paper, a HGA (hybrid genetic algorithm) is proposed for permutation flowshop scheduling problems (PFSP) with total flowtime minimization, which are known to be NP-hard. One of the chromosomes in the initial population is constructed by a suitable heuristic and the others are yielded randomly. An artificial chromosome is generated by a weighted simple mining gene structure, with which a new crossover operator is presented. Additionally, two effective heuristics are adopted as local search to improve all generated chromosomes in each generation. The HGA is compared with one of the most effective heuristics and a recent meta-heuristic on 120 benchmark instances. Experimental results show that the HGA outperforms the other two algorithms for all cases. Furthermore, HGA obtains 115 best solutions for the benchmark instances, 92 of which are newly discovered.     

Single machine bicriteria scheduling with equal-length jobs to minimize total weighted completion time and maximum cost

Bicriteria scheduling problems are of significance in both theoretical and applied aspects. It is known that the single machine bicriteria scheduling problem of minimizing total weighted completion time and maximum cost simultaneously is strongly NP-hard. In this paper we consider a special case where the jobs have equal length and present an $O(n^{3}\log n)$ algorithm for finding all Pareto optimal solutions of this bicriteria scheduling problem.     

Single machine scheduling to minimize weighted earliness subject to no tardy jobs

This paper considers the single machine scheduling problem where the objective is to minimize the total weighted earliness subject to no tardy jobs. Known results for a well researched single machine scheduling problem where the objective is to minimize the weighted completion time subject to no tardy jobs have been used in analyzing this problem. Several important results are proved and both exact and approximate methods are developed to solve this problem.     

Single machine batch scheduling to minimize the weighted number of late jobs

The single machine batch scheduling problem to minimize the weighted number of late jobs is studied. In this problem,n jobs have to be processed on a single machine. Each job has a processing time, a due date and a weight. Jobs may be combined to form batches containing contiguously scheduled jobs. For each batch, a constant set-up time is needed before the first job of this batch is processed. The completion time of each job in the batch coincides with the completion time of the last job in this batch. A job is late if it is completed after its due date. A schedule specifies the sequence of jobs and the size of each batch, i.e. the number of jobs it contains. The objective is to find a schedule which minimizes the weighted number of late jobs. This problem isNP-hard even if all due dates are equal. For the general case, we present a dynamic programming algorithm which solves the problem with equal weights inO(n ³) time. We formulate a certain scaled problem and show that our dynamic programming algorithm applied to this scaled problem provides a fully polynomial approximation scheme for the original problem. Each algorithm of this scheme has a time requirement ofO(n ³/ +n ³ logn). A side result is anO(n logn) algorithm for the problem of minimizing the maximum weight of late jobs.Supported by INTAS Project 93-257.     

Scheduling start time dependent jobs to minimize the total weighted completion time

This paper deals with a single machine scheduling problem with start time dependent job processing times. The job processing times are characterized by decreasing linear functions dependent on their start times. The problem is to find a schedule for which the total weighted completion time is minimized. It is proved that the problem is NP-hard. Some properties of special cases of the general problem are also given. Based on these results, two heuristic algorithms are constructed and their performance is compared.     

工件可自由下线最小化总完工时间的平行分批排序问题

考虑工件可自由下线最小化总完工时间的有界平行分批排序问题. 在该问题中, 一台平行批机器可以同时处理 b 个工件作为一个平行批, 这里b 是批容量, 一个批的加工时间等于分配给这个批的工件的最大加工时间. 关于可自由下线工件, 每一个工件的完工时间等于包含这个工件的批的开工时间与工件的加工时间的和. 也就是, 如果一个批B 有一个开工时间S, 那么包含在批B 中的每一个工件J_j 的开工时间定义为S, 而它的完工时间定义为S+p_j, 这里p_j 是工件J_j 的加工时间. 对此问题, 首先研究最优排序的一些性质. 然后, 基于这些性质, 给出一个运行时间为O(n^{b (b-1)})的动态规划算法.     

An efficient heuristic based on machine workload for the flowshop scheduling problem with setup and removal

We are concerned in this paper with solving ann jobs,M machines flowshop scheduling problem where the objective function is the minimization of the makespan. We take into account setup, processing and removal times separately. After drawing up a synthesis of existing work which addresses this type of problems, we propose a new heuristic algorithm which is based on the machine workload to find an efficient permutation schedule. Computational experiences show that our algorithm yields excellent results, particularly when bottleneck machines are present.     

Single-machine scheduling to minimize total absolute differences in waiting times with deteriorating jobs

In this paper we consider a single-machine scheduling problem with simple linear deterioration. By simple linear deterioration, we mean that the processing time of a job is a simple linear function of its execution starting time and its deterioration rate. The objective is to find a schedule that minimizes total absolute differences in waiting times. We show that the optimal schedule is V-shaped: jobs are arranged in descending order of their deterioration rates if they are placed before the job with the smallest deterioration rate, but in ascending order of their deterioration rates if placed after it. We prove other several properties of an optimal schedule, and introduce two efficient heuristic algorithms that are tested against a lower bound. We also provide computational results to evaluate the performance of the heuristic algorithms.     

A fast ant-colony algorithm for single-machine scheduling to minimize the sum of weighted tardiness of jobs

The problem of scheduling on a single machine is considered in this paper with the objective of minimizing the sum of weighted tardiness of jobs. A new ant-colony optimization (ACO) algorithm, called fast ACO (FACO), is proposed and analysed for solving the single-machine scheduling problem. By considering the benchmark problems available in the literature for analysing the performance of algorithms for scheduling on a single machine with the consideration of weighted tardiness of jobs, we validate the appropriateness of the proposed local-search schemes and parameter settings used in the FACO. We also present a comparison of the requirements of CPU time for solving the single-machine total-weighted tardiness problem by the FACO and the existing algorithms.     

工件具有加工位置上限最小化加权总误工量的单机排序问题

考虑工件具有加工位置上限最小化总加权误工量的单机排序问题.在此排序问题中,每个工件J_j都具有一个加工位置上限k_j.也就是说,如果工件J_j是一个可行排序中的第x个工件,那么就需要满足x ≤ k_j.证明了（i）当工件具有相同工期时,该排序问题是二元NP-难的并且是拟多项式时间可解的,（ii）当工件具有单位权重时,该排序问题是一元NP-难的.     

Approximability of single machine scheduling with fixed jobs to minimize total completion time

We consider the single machine scheduling problem to minimize total completion time with fixed jobs, precedence constraints and release dates. There are some jobs that are already fixed in the schedule. The remaining jobs are free to be assigned to any free-time intervals on the machine in such a way that they do not overlap with the fixed jobs. Each free job has a release date, and the order of processing the free jobs is restricted by the given precedence constraints. The objective is to minimize the total completion time. This problem is strongly NP-hard. Approximability of this problem is studied in this paper. When the jobs are processed without preemption, we show that the problem has a linear-time n-approximation algorithm, but no pseudopolynomial-time (1 − δ)n-approximation algorithm exists even if all the release dates are zero, for any constant δ > 0, if P ≠ NP, where n is the number of jobs; for the case that the jobs have no precedence constraints and no release dates, we show that the problem has no pseudopolynomial-time (2 − δ)-approximation algorithm, for any constant δ > 0, if P ≠ NP, and for the weighted version, we show that the problem has no polynomial-time 2^q(n)-approximation algorithm and no pseudopolynomial-time q(n)-approximation algorithm, where q(n) is any given polynomial of n. When preemption is allowed, we show that the problem with independent jobs can be solved in O(n log n) time with distinct release dates, but the weighted version is strongly NP-hard even with no release dates; the problems with weighted independent jobs or with jobs under precedence constraints are shown having polynomial-time n-approximation algorithms. We also establish the relationship of the approximability between the fixed job scheduling problem and the bin-packing problem.     

Local search methods for the flowshop scheduling problem with flowtime minimization

Flowshop scheduling is a very active research area. This problem still attracts a considerable amount of interest despite the sheer amount of available results. Total flowtime minimization of a flowshop has been actively studied and many effective algorithms have been proposed in the last few years. New best solutions have been found for common benchmarks at a rapid pace. However, these improvements many times come at the cost of sophisticated algorithms. Complex methods hinder potential applications and are difficult to extend to small problem variations. Replicability of results is also a challenge. In this paper, we examine simple and easy to implement methods that at the same time result in state-of-the-art performance. The first two proposed methods are based on the well known Iterated Local Search (ILS) and Iterated Greedy (IG) frameworks, which have been applied with great success to other flowshop problems. Additionally, we present extensions of these methods that work over populations, something that we refer to as population-based ILS (pILS) and population-based IG (pIGA), respectively. We calibrate the presented algorithms by means of the Design of Experiments (DOE) approach. Extensive comparative evaluations are carried out against the most recent techniques for the considered problem in the literature. The results of a comprehensive computational and statistical analysis show that the presented algorithms are very effective. Furthermore, we show that, despite their simplicity, the presented methods are able to improve 12 out of 120 best known solutions of Taillard’s flowshop benchmark with total flowtime criterion.     

Scheduling a hybrid assembly-differentiation flowshop to minimize total flow time

This study considers a hybrid assembly-differentiation flowshop scheduling problem (HADFSP), in which there are three production stages, including components manufacturing, assembly, and differentiation. All the components of a job are processed on different machines at the first stage. Subsequently, they are assembled together on a common single machine at the second stage. At the third stage, each job of a particular type is processed on a dedicated machine. The objective is to find a job schedule to minimize total flow time (TFT). At first, a mixed integer programming (MIP) model is formulated and then some properties of the optimal solution are presented. Since the NP-hardness of the problem, two fast heuristics (SPT-based heuristic and NEH-based heuristic) and three hybrid meta-heuristics (HGA-VNS, HDDE-VNS and HEDA-VNS) are developed for solving medium- and large-size problems. In order to evaluate the performances of the proposed algorithms, a lower bound for the HADFSP with TFT criteria (HADFSP-TFT) is established. The MIP model and the proposed algorithms are compared on randomly generated problems. Computational results show the effectiveness of the MIP model and the proposed algorithms. The computational analysis indicates that, in average, the HDDE-VNS performs better and more robustly than the other two meta-heuristics, whereas the NEH heuristic consume little time and could reach reasonable solutions.     

Preemptive scheduling of jobs with agreeable due dates on a single machine to minimize total tardiness

We consider the problem of scheduling n preemptive jobs on a single machine to minimize total tardiness, subject to agreeable due dates, i.e., a later release date corresponds to a later due date. We prove that the problem is -hard in the ordinary sense by showing that it is -hard, and deriving a pseudo-polynomial algorithm for it.