氧化铜修饰羟基磷灰石负载金对醇类需氧氧化的双金属协同催化

采用均匀沉积-沉淀法制备了氧化铜修饰羟基磷灰石负载金催化剂(Au/CuO-HAP),并用原子吸收光谱、N2吸附脱附、X射线粉末衍射、透射电镜和X射线光电子能谱等方法对催化剂结构和形貌进行了表征.考察了催化剂对醇类液相需氧氧化的催化性能.与单金属Au/HAP或CuO-HAP相比较,双金属Au/CuO-HAP对苯甲醇氧化的催化活性和苯甲醛的选择性有显著提高,120 oC反应1.5 h,苯甲醇的转化率和苯甲醛的选择性分别达到99.7%和98.4%.在Au/CuO-HAP的催化下,其它类型的芳香醇均可高选择性转化为相应的醛或酮. Au/CuO-HAP催化剂有很好的稳定性和可回收性,4次回收后,其催化活性没有明显变化.     

SnO2负载Au和M-Au(M=Pt,Pd)催化剂及其低温催化氧化CO性能

以SnO₂为载体, 采用沉积沉淀法(DP)、共沉淀法(CP)和浸渍法(IM)制备了金负载Au/SnO₂催化剂, 同时采用沉积沉淀法制备了M-Au/SnO₂(M=Pd, Pt)双金属负载催化剂. 通过X射线衍射(XRD)、BET比表面积测定、透射电镜(TEM)和X射线光电子能谱(XPS)等技术对样品进行表征, 并测定其对CO的催化活性. 结果表明: 与CP法和IM 法相比, DP法制备的Au/SnO₂-DP 催化剂, Au 颗粒(<5 nm)较小, 分布均匀; Au/SnO₂-DP 中的Au 是以金属态Au0存在, 而Au/SnO₂-CP 和Au/SnO₂-IM 中, 金以Au⁰和Au³⁺的混合价态存在, 在Au/SnO₂-DP和M-Au/SnO₂中的Au、Pt、Pd和SnO₂之间存在相互作用; Au/SnO₂-DP 催化性能明显优于Au/SnO₂-CP 和Au/SnO₂-IM. Au与Pt 和Pd的双金属复合催化剂催化活性明显提高. 不同方法制备Au/SnO₂催化活性的差别主要是由于Au颗粒大小和Au氧化态的不同而产生. 而M-Au/SnO₂活性提高, 可能是由于Au与Pt 和Pd之间的相互作用.     

Novel tricomponent membranes containing poly(ethylene glycol)/poly(pentamethylcyclopentasiloxane)/poly(dimethylsiloxane) domains

The synthesis and characterization of novel tricomponent networks consisting of well‐defined poly(ethylene glycol) (PEG) and poly(dimethylsiloxane) (PDMS) strands crosslinked and reinforced by poly(pentamethylcyclopentasiloxane) (PD₅) domains are described. Network synthesis occurred by dissolving α,ω‐diallyl PEG and α,ω‐divinyl PDMS prepolymers in a common solvent (toluene), introducing a stoichiometric excess of pentamethylcyclopentasiloxane (D₅H) to the charge, inducing the cohydrosilation of the prepolymers by Karstedt's catalyst and completing network formation by the addition of water. Water in the presence of the Pt‐based catalyst oxidizes the SiH groups of D₅H to SiOH functions that immediately polycondense and bring about crosslinking. The progress of cohydrosilation and polycondensation was followed by monitoring the disappearance of the SiH and SiOH functions by Fourier transform infrared spectroscopy. Because cohydrosilation and polycondensation are essentially quantitative, overall network composition can be controlled by calculating the stoichiometry of the three network constituents. The very low quantities of extractable (sol) fractions corroborate efficient crosslinking. The networks swell in both water and hexanes. Differential scanning calorimetry showed three thermal transitions assigned, respectively, to PEG (melting temperature: 46–60 °C depending on composition), PDMS [glass‐transition temperature (T_g) = ～?121 °C], and PD₅ (T_g = ～?159 °C) and indicated a phase‐separated tricomponent nanoarchitecture. The low T_g of the PD₅ phase is unprecedented. The strength and elongation of PEG/PD₅/PDMS networks can be controlled by overall network composition. The synthesis of networks exhibiting sufficient mechanical properties (tensile stress: 2–5 MPa, elongation: 100–800%) for various possible applications has been demonstrated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3093–3102, 2002     

Aerobic oxidation of alcohols to carbonyl compounds mediated by poly(ethylene glycol)-supported TEMPO radicals

Two poly(ethylene glycol)-supported TEMPO (PEG-TEMPO) has been successfully applied as soluble, recyclable catalysts in the chemoselective oxidation of primary and benzylic alcohols with molecular oxygen in the presence of Co(NO₃)₂ and Mn(NO₃)₂ as co-catalysts (Minisci's conditions). Under those conditions, secondary alcohols are also oxidized to ketones, although usually in lower yields. The insertion of a spacer between the PEG moiety and TEMPO has beneficial effects on both the activity and ease of recovery of the supported catalyst.     

Mechanistic study of alcohol oxidation by the Pd(OAc)(2)/O(2)/DMSO catalyst system and implications for the development of improved aerobic oxidation catalysts

The Pd(OAc)2/O2/DMSO catalyst system displays impressive versatility in the aerobic oxidation of organic substrates, ranging from alcohols to olefins. This report details mechanistic insights into these reactions. Dimethyl sulfoxide (DMSO) plays no redox role in the chemistry, and kinetic experiments identify the turnover-limiting step as DMSO-promoted oxidation of palladium(0) by molecular oxygen. The "chemical oxidase" pathway characterized for this catalyst system holds great promise for the design of new aerobic oxidation reactions.     

Selective and efficient oxidation of ethylene to ethylene glycol acetates with H2O2 catalyzed by Pd(OAc)2-di(2-pyridyl)ketone-di(2-pyridyl)methanesulfonate system

Novel systems for palladium-catalyzed selective oxidation of ethylene to a mixture of ethylene glycol mono- and di-acetates as the major reaction products (90-95% selectivity) with H₂O₂ in acetic acid solution at ambient pressure and 20 °C were developed. The catalytic reaction is very efficient with up to 90% combined yield of glycol acetates with H₂O₂ as a limiting reagent and 1 mol% catalyst loading. The catalytic systems developed are comprised of a mixture of Pd(OAc)₂, and 6-methyl substituted (2-pyridyl)methanesulfonate and/or di(6-pyridyl)ketone ligands. Compositions of the binary, Pd(OAc)₂-dpk, Pd(OAc)₂-Me-dpms, and ternary, Pd(OAc)₂-dpk-Me-dpms, systems have been studied by means of ¹H NMR spectroscopy and ESI mass spectrometry. Kinetics studies were performed as well and plausible reaction mechanism was suggested, which features facially chelating ligand-enabled facile oxidation of Pd^IIC₂H₄OAc intermediates with H₂O₂ to form Pd^IVC₂H₄OAc transients.     

A responsive poly(N-isopropylacrylamide)/poly(ethylene glycol) diacrylate hydrogel microsphere

A responsive hydrogel microsphere, which is constituted by poly(N-isopropylacrylamide)/poly(ethylene glycol) diacrylate, was fabricated in an aqueous two-phase system based on the polymer–polymer immiscibility. Characteristics of the hydrogel microsphere, such as the particle size and the morphology of freeze-dried or hydrated natural microspheres in water, tetrahydrofuran (THF)/H₂O (1:1 in volume) or acetone/H₂O (1:1 in volume), were investigated. The results showed that the swelling ratio and the particle size of the hydrogel microspheres were highly dependent on solvent composition. In addition, these characteristics were dramatically reduced when THF or acetone was added into the aqueous media. Scanning electron microscopy and environmental scanning electron microscopy micrographs also visually demonstrated that the regular spherical shape of the microspheres in water turned to irregular in shape when the microspheres were immersed in THF/H₂O or acetone/H₂O mixtures instead of pure water.     

Ligand-modulated palladium oxidation catalysis: mechanistic insights into aerobic alcohol oxidation with the Pd(OAc)(2)/pyridine catalyst system

Pd(OAc)(2):pyridine (1:4) is an efficient catalyst system for the oxidation of alcohols with molecular oxygen. A mechanistic study of this reaction reveals that pyridine promotes the aerobic oxidation of palladium(0) but inhibits the oxidation of alcohol by palladium(II). Kinetic results reveal that turnover-limiting substrate oxidation consists of (i) formation of a palladium(II)-alkoxide, (ii) pyridine dissociation, and (iii) beta-hydride elimination. These results provide a framework for the design and/or screening of more effective aerobic oxidation catalysts.     

Highly practical copper(I)/TEMPO catalyst system for chemoselective aerobic oxidation of primary alcohols

Aerobic oxidation reactions have been the focus of considerable attention, but their use in mainstream organic chemistry has been constrained by limitations in their synthetic scope and by practical factors, such as the use of pure O(2) as the oxidant or complex catalyst synthesis. Here, we report a new (bpy)Cu(I)/TEMPO catalyst system that enables efficient and selective aerobic oxidation of a broad range of primary alcohols, including allylic, benzylic, and aliphatic derivatives, to the corresponding aldehydes using readily available reagents, at room temperature with ambient air as the oxidant. The catalyst system is compatible with a wide range of functional groups and the high selectivity for 1° alcohols enables selective oxidation of diols that lack protecting groups.     

Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend

The mechanical, thermal and biodegradable properties of poly(d,l-lactide) (PDLLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ethylene glycol) (PEG) blends were studied. The influence of PEG on the tensile and impact strengths of the blends was investigated. The results showed that the toughness and elongation at break of the PDLLA/PHBV (70/30) blends were greatly improved by the addition of PEG, and the notched Izod impact strength increased about 400% and the elongation at break increased from 2.1% to 237.0%. The thermal and degradation properties of the blends were investigated by differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA), it was found that the thermal stability of PHBV in the presence of PDLLA was improved. The degradation test showed that the addition of PEG could notably accelerate the biodegradation of the blends in the soil at room temperature, and the mass loss is about 20% after 30 days of the storage.     

Solution proprieties of dendritic triazine/poly(ethylene glycol)/dendritic triazine block copolymers

Dendritic–linear–dendritic triblock copolymers based on poly(ethylene glycol) (PEG) as the core and dendritic triazine blocks were synthesized. The micellar and aggregation characteristics of the compounds were investigated with NMR and fluorescence spectroscopy. The NMR investigations were carried out in a variety of solvents. In those solvents in which both moieties of the linear–dendritic compounds were completely soluble, the NMR spectra of the linear–dendritic compounds were in the normal form, and all of the signals were as expected. However, in other solvents in which one of the moieties of the compounds was not very soluble, the NMR spectra of the compounds were not in the normal form, and some of the signals were broad or disappeared. The results could be related to the aggregation behavior of the block copolymers with extended or packed conformations of PEG in the solvents, as previously observed in similar systems. Also, fluorescence investigations of some of the isolated compounds in aqueous solutions displayed micellar behavior. The critical micelle concentrations of the copolymers were determined with a fluorescence technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 28–41, 2005     

Preparation and characterization of collagen/chitosan poly (ethylene glycol)/nanohydroxyapatite composite scaffolds

Porous three‐dimensional collagen/chitosan scaffolds combined with poly (ethylene glycol) (PEG) and hydroxyapatite were obtained through a freeze‐drying method. Physical cross‐linking was examined by dehydrothermal treatment. The prepared materials were characterized by different analyses, eg, scanning electron microscopy (SEM), measurements of porosity and swelling, mechanical properties, and resistance to enzymatic degradation. The porosity of scaffolds and their swelling ratio decreased with the addition of hydroxyapatite. Moreover, after exposure to collagenase, the collagen/chitosan matrices containing PEG showed much faster degradation rate than matrices with the addition of hydroxyapatite. The results indicated that the addition of hydroxyapatite led to improvement of stiffness. The highest degree of porosity and swelling were demonstrated by collagen/chitosan/PEG matrices without hydroxyapatite.     

聚谷氨酸苄酯-聚乙二醇-聚谷氨酸苄酯嵌段共聚物的圆二色光谱分析

用三乙胺和双端氨基聚乙二醇分别引发经酯化、环化等处理的谷氨酸开环聚合制备聚谷氨酸苄酯（PBLG）和聚谷氨酸苄酯-聚乙二醇-聚谷氨酸苄酯嵌段共聚物（PBLG-PEG-PBLG,GEG）。采用圆二色光谱对聚合物溶液的旋光性进行分析,以确定共聚物中PBLG嵌段的构型和含量。结果表明,均聚物和共聚物中的PBLG嵌段都以α-螺旋构型存在,中间的PEG不扰乱其构型,通过聚合物的圆二色性（circular dichroism,CD）计算出的PBLG嵌段含量与核磁共振（nuclear magnetic resonance,NMR）所得结果基本一致。     

Protein partitioning in poly(ethylene glycol)/sodium polyacrylate aqueous two-phase systems

The partition of hemoglobin, lysozyme and glucose-6-phosphate dehydrogenase (G6PDH) in a novel inexpensive aqueous two-phase system (ATPS) composed by poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA) has been studied. The effect of NaCl and Na(2)SO(4), pH and PEG molecular size on the partitioning has been studied. At high pH (above 9), hemoglobin partitions strongly to the PEG-phase. Although some precipitation of hemoglobin occurs, high recovery values are obtained particularly for lysozyme and G6PDH. The partitioning forces are dominated by the hydrophobic and electrochemical (salt) effects, since the positively charged lysozyme and negatively charged G6PDH partitions to the non-charged PEG and the strongly negatively charged polyacrylate enriched phase, respectively.     

Pd(0)/C catalyzed efficient Wacker oxidation of functionalized terminal olefins

Wacker oxidation of terminal olefins was carried out at room temperature and atmospheric pressure by using Pd(0)/C in THF/H₂O (9:1). Palladium(0)/C was proven to be highly efficient catalyst for the Wacker oxidation of terminal olefins to the corresponding methyl ketones. The catalyst was reusable while maintaining its activity and selectivity to a high degree.     

温控聚乙二醇两相体系中纳米钯催化肉桂醛选择性加氢反应

将具有“高温混溶、室温分相”功能的聚乙二醇4000(PEG₄₀₀₀)与甲苯-正庚烷组成的两相体系用于纳米钯催化的肉桂醛选择性加氢反应中.在优化的反应条件下,肉桂醛转化率和氢化肉桂醛选择性分别为99%和98%.钯纳米催化剂经简单分相即可与产物分离,且循环使用8次,其活性和选择性基本保持不变.     

Magnetically recoverable magnetite/gold catalyst stabilized by poly(N-vinyl-2-pyrrolidone) for aerobic oxidation of alcohols

Fe(3)O(4):PVP/Au nanocomposite synthesized via a two-step procedure was tested as a quasi-homogenous alcohol oxidation catalyst. It was found that the nanocomposite was able to carry out aerobic oxidation of alcohols in water at room temperature. Studies show rapid magnetic recoverability and reusability characteristics.