Synthesis and binding properties of calix[4]arene telomers

Two calix[4]arene derivatives (5 and 8) and their telomers are synthesized to estimate selective extraction of alkali and transition metal cations from the aqueous to the organic phase (chloroform). Compound 5 shows selectivity toward Hg²⁺. Compound 8 and telomers 6 and 9 are not selective but are good extractants for all used transition metal ions. The observations suggest that ethylene glycol bridges are efficient for carrying transition metal cations in a two-phase solvent system. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4351–4355, 1999     

Compensation of steric demand by cation-pi interactions,cobaltocenium cations as guests in tetraurea calix[4]arene dimers

The affinities of ferrocene (2) and the cobaltocenium cation (3+), which have roughly the same size and differ in their charge, towards the inner cavity of the dimeric capsule formed by tetraurea calix[4]arene (1) were studied in C2D4Cl2 solutions. While 3+, which occupies more than 75% of the internal volume of the dimer, is readily encapsulated this is not the case for 2. This is probably due to cation-pi interactions, which operate only between 3+ and the aromatic rings of the calix[4]arene dimer. We found that the affinity of the cobaltocenium cation is higher than that of the tropylium cation (4+) and is only 2-3 times less than that of the tetraethylammoniun cation (5+). From the variable temperature 1H NMR spectra of this capsule, the free energy of activation at 298 K (deltaGdouble dagger(298K)) for the reorientation of the hydrogen bonded belt between the two parts of the dimer could be determined by total line shape analysis for the aromatic protons of the calixarene. The value of 14.3 +/- 0.2 kcal mol(-1) for the dimeric capsules of 3+ PF6- is very similar to the free activation energy found for dimeric capsules of 1 with 4+ PF6- and 5+ PF6- in C2D4Cl2. It becomes significantly lower, if PF6- is replaced by BF4-. We also found that ten times more DMSO is needed to disrupt the capsule 1 x 3+ x 1 than the corresponding 1 x 1 dimer containing benzene as guest. This demonstrates again the importance of the cation-pi interactions for the stability of such hydrogen-bonded dimeric capsules.     

Syntheses and spin-spin exchange interactions of calix[4]arene biradicals

Three novel paramagnetic calix[4]arenes (2, 3 and 4) with two opposite nitroxide radicals on the upper rims were synthesized and characterized. The through-space spin-spin exchange interactions of these calixarene biradicals were investigated, and found to be affected by many factors, such as molecular conformational flexibility, steric hindrance, temperature, solvent effect and complexation of silver ion.     

Energetics of guest binding to calix[4]arene molecular containers

The synthesis of calix[4]arene-based molecular containers 1 and 2 along with the thermodynamic behaviors of cation binding are reported. The containers encapsulated N-methylpicolinium salts to form 1:1 host-guest complexes in chloroform. The thermodynamic investigations of the containers provide contrastive pictures for the process of their guest encapsulations. The encapsulation of 1 with the N-methylpicolinium cations, bearing a series of counter anions, was primarily enthalpy-driven. The enthalpic difference among the host-guest complexes of the salts was directly related to the total electrostatic stability of the ion-pairs. When 2 encapsulated a series of the N-methylpicolinium cations within its cavity, negative heat capacity changes were observed. This suggests that the changes in the solvation spheres of the container and its guest before and after the formation of the host-guest complex depend on temperature.     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Nanoencapsulation of calix[4]arene inclusion complexes

A hexameric resorcinarene nanocapsule in wet CDCl3 forms inclusion complexes of calix[4]arene with tetramethylammonium and trimethylsulfoxonium cations to give highly stable Russian-doll-type multicomponent assemblies. The 2D NOESY experiments revealed the size of the assembly, the close proximity of the encapsulated calix[4]arene molecule to the resorcinarene molecules of the capsule, and the inclusion of the tetramethylammonium cation in the calix[4]arene cavity.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).     

Sterically and guest-controlled self-assembly of calix[4]arene derivatives

In solvents such as chloroform or benzene, tetraurea calix[4]arenes 1 form dimeric capsules in which one solvent molecule is usually included as guest. To explore the structural requirements for the formation of such hydrogen-bonded dimers we replaced one p-tolylurea residue by a simple acetamide function. The resulting calix[4]arene 2 a, substituted at its wide rim with one acetamide and three p-tolylurea functions, assumes a C(1)-symmetrical conformation in apolar solvents as shown by (1)H NMR, which is not compatible with the usual capsule. In the crystalline state, four molecules of 2 a, adopting a pinched cone conformation, assemble into a quasi S(4)-symmetrical tetramer stabilized by a cyclic array of 24 NH.O==C hydrogen bonds and four NH.pi interactions. Four acetamide groups are hydrogen-bonded to each other and pack tightly in the center of the assembly. All polar residues are buried inside the tetramer, the surface of which is lipophilic. Extensive NMR studies revealed similar structures in apolar solvents such as [D]chloroform or [D(6)]benzene for calixacetamides 2 a-c. The formation of these tetramers in solution is critically dependent on the size of the amide fragment, so that propionamide 2 d, butyramide 2 e, and p-tolylamide 2 f form only ill-defined aggregates. This is caused by steric crowding inside the tetrameric assembly. The tetramers persist during molecular dynamics simulations, and the optimized average structure of the MD run is similar to that found in the crystalline state. Theoretical studies revealed that cooperation of hydrogen bonds with multiple NH.pi, C--H.pi, and pi.pi attractions make the tetramer more stable than the capsular dimer with the solvent as guest. In the presence of tetraethylammonium salts, however, compounds 2 a-e form dimeric capsular assemblies, each incorporating a single ammonium cation. Only one of two possible regioisomeric dimers is formed, in which both acetamide groups are surrounded by two urea residues. These examples give striking evidence of how self-assembly in solution can be strongly dependent on subtle structural factors and of how the formation of dimeric capsules can be induced by the presence of an appropriate guest.     

Synthesis of upper rim calix[4]arene carcerands

The synthesis of novel tetra-olefinic calix[4]arene carcerands is described using a synthetic strategy involving palladium catalysed Heck coupling followed by imine formation.     

Electrochemical oxidation of a tetraester calix[4]arene

The electrochemical oxidation of tetraethyl ester p-tert-butyl calix[4]arene 1 was observed in acetonitrile solution at a platinum electrode, using either cyclic or square wave voltammetry. The oxidation occurred in a number of processes, with the lowest, process I at a peak potential of 1.10 V vs. Ferrocene, being the best defined response. This was attributed to the one-electron oxidation of the aryl ether functionality present in the calixarene and so should provide a route to the electrochemical detection of calixarenes in non-aqueous mixtures. The oxidation behaviour was dependent on the presence of alkali metal cations in solution. Shifts in the oxidation potentials observed were in good agreement with the order of selectivity for the alkali metal cations.     

Helical aquatubes of calix[4]arene di-methoxycarboxylic acid

Two trimeric units of calix[4]arene di-methoxycarboxylic acid form a six-pointed star architecture that, in turn, generates triple helical aquatubes which intermesh between themselves by aromatic-aromatic interdigitation of the macrocycle.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

四乙氧羰基甲氧基杯[4]芳烃的合成与性质

配位作用;液膜传递;四乙氧羰基甲氧基杯[4]芳烃的合成与性质     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.