NaHSO4.H2O Catalyzed Multicomponent Synthesis of 1-(Benzothiazolylamino) Methyl-2-Naphthols Under Solvent-Free Conditions

A one-pot, efficient three-component condensation of aldehydes, 2-naphthol, and 2-aminobenzothiazole in the presence of sodium hydrogen sulfate as an effective catalyst for the synthesis of 1-(benzothiazolylamino)methyl-2-naphthol derivatives under thermal and solvent-free conditions is described. These products involve two biologically active parts, Betti's base and benzothiazole. The present methodology offers several advantages, such as good yields, short reaction times, and easy work-up.     

Congeners of Troeger's base as chiral ligands

(S)-(+)-Troeger's base can be deprotonated and alkylated without loss of stereochemical integrity. An examination of the ability of Troeger's base and several derivatives prepared in this fashion to effect asymmetric induction in the addition of diethylzinc to aromatic aldehydes was conducted. Enantiomeric excesses as high as 86% were achieved, providing evidence that Troeger's base represents a chiral framework which can be modified to produce ligands for catalytic asymmetric synthesis.     

Validated Chiral LC Method for the Enantiomeric Separation of Palonosetron Hydrochloride

A new and accurate chiral liquid chromatographic method has been developed for the separation of palonosetron hydrochloride (PALO) and its (R,R)-enantiomer in bulk drug samples with an elution time of about 20 min. The chromatographic separation was carried out by normal phase chromatography using an immobilized cellulose based chiral stationary phase (Chiralpak-IC) with a mobile phase composed of n-hexane:ethanol:1,4 dioxane:trifluoroacetic acid:diethylamine (65:30:5:0.3:0.3, v/v) pumped at a flow rate of 1.0 mL min⁻¹. The resolution (R _s ) between the enantiomers was found to be greater than 3.0 and interestingly the (R,R)-enantiomer was eluted prior to the (S,S)-enantiomer (PALO) in the developed method. Mobile phase additives, trifluoroacetic acid and diethylamine played a key role in achieving chromatographic resolution between the enantiomers and also in enhancing chromatographic efficiency. The limit of detection (LOD) and limit of quantification (LOQ) of the (R,R)-enantiomer were found to be 0.03 and 0.1 μg respectively for 10 μL injection volume. The developed method shows excellent linearity (r ² > 0.999) over a range of LOQ to 0.3% for the (R,R)-enantiomer. The percentage recovery of the (R,R)-enantiomer in bulk drug samples ranged from 97.2 to 102.3 revealing good sensitivity of the developed method. Robustness studies were also carried out on the developed method.

     

Resolution of albuterol acetonide

The (R)-enantiomer of albuterol has been isolated via resolution of albuterol acetonide with (2S,3S)-di-O-benzoyl- or (2S,3S)-di-O-toluoyltartaric acid. The absolute configuration of the resolved acetonide was assessed by ¹H NMR analysis of its (R)-Mosher's ester, and confirmed by an X-ray crystal structure determination of the (R)-phenylethylurea derivative of the (S)-enantiomer.     

A Convenient Method of Synthesis of Bis-Indolylmethanes: Indium Trichloride Catalyzed Reactions of Indole with Aldehydes and Schiff's Bases

Anhydrous indium trichloride (InCl₃) is found to catalyze the electrophilic substitution reaction of indole with aromatic aldehydes and Schiff's bases which resulted in an efficient synthesis of bis-indolylmethanes in good to excellent yield.     

Efficient Synthesis,Characterization, In Vitro Antibacterial and Antifungal Activity Study and Computational Tool for Prediction of Molecular Properties of Some Novel Schiff's Base via Betti's Protocol and Azetidinones

Series of new substituted pyrazolone derivatives via Betti's condensation reaction of pyrazolone and different aldehydes has been reported successfully under ambient reaction conditions. The structural elucidation of newly synthesized compounds was done using analytical and spectroscopic tools such as elemental analysis, ¹H NMR, ¹³C NMR, and mass spectroscopy. Physicochemical parameters, toxicity profiles and drug likeness properties were studied using various bioinformaticals tools like Osiris and molinspiration. These results viz., the good correlations between the inhibitory activities and the computational values make the molecules available for future protein–ligand interaction studies. It further provided useful information in understanding the structural and chemical features of the drug in designing and finding new potential inhibitors.     

Molecular Design of Calixarene 5. Syntheses and Cation Selectivities of Novel Schiff's Base p‐tert‐Butylcalix[4]arenes

Five novel Schiff's bases p‐tert‐butylcalix[4]arenes have been synthesized in high yields by the reaction of 1,3‐distally disubstituted p‐tert‐butylcalix[4]arene amine (1) with the corresponding aromatic aldehydes, and their cation binding abilities and selectivities with alkali and heavy metal ions have been evaluated by solvent extraction of aqueous metal picrates to show the highest Ag⁺ extractability for Schiff's base p‐tert‐butylcalix[4]arene (6) and the best Na⁺/Li⁺ and Ag⁺/Ti⁺ selectivities for Schiff's base p‐tert‐butylcalix[4]arene (4 and 2) over any other calix[4]arene derivatives, respectively.     

Highly Enantiopure (tert-Butyldiphenylsilyloxymethyl)Oxiranes from Barium Carbonate

The synthesis of (2R)-(tert-butyldiphenylsilyloxymethyl)oxirane and the (2S)-enantiomer from barium carbonate was developed. Methyl glycolate or the hydroxamate analog was prepared and in turn reacted with (S)-(-)-methyl p-tolylsulfoxide or the (R)-enantiomer to make β-keto sulfoxides. From the sulfoxides, we made the diastereoisomeric alcohols in a highly selective sulfoxide group directed hydride reduction, and a Pummerer rearrangement reaction followed by deprotection yielded the enantiomeric diols. (2R)-(tert-Butyldiphenylsilyloxymethyl)oxirane and its (2S)-enantiomer were derived from these diols in an overall yield of 56% from barium carbonate. This method was developed to provide a convenient access to isotope-labeled analogs of these compounds.     

Enantioselective synthesis of (S)- and (R)-6-hydroxy-8-nonene-carboxylates by asymmetric catalysis: a formal synthesis of (R)-α-lipoic acid and its (S)-antipode

A short and efficient enantioselective synthesis of (S)- and (R)-configured 6-hydroxy-8-nonene-carboxylates — precursors to (R)-α-lipoic acid and its (S)-enantiomer — by allylation of alkoxycarbonyl substituted aldehydes with allyltrimethylstannane and BINOL/Ti(OiPr)₄ catalyst is described. The best results in terms of enantiomeric purity and yield are obtained employing 10 mol% of the titanium-species without molecular sieves.     

Biocatalytic Deracemization of 1,4-Benzodiazepines in the Synthesis of Enantiomerically Pure Serine

An efficient stereocontrolled synthesis of (S)-N-Cbz-serine (Cbz = benzyloxycarbonyl; 12 ) and of its (R)-enantiomer is reported. Kinetic resolution of the easily available racemic 3-(hydroxymethyl)-1,4-benzodiazepin-2-ones is performed in the key step via acetylation by the immobilized Mucor miehei lipase (Lipozyme IM) at 60°. This method is characterized by high enantiomer purity (ee's ges; 99%) of the intermediary alcohols (+)- 8 and (+)- 9 and acetates (?)- 10 and (?)- 11 , as well as of the final products (S)- and (R)-N-Cbz-serine, simple recycling of the biocatalyst, complete recovery of 2-aminobenzophenones ( 3 and 4 ) and their recycling into production of 1,4-benzodiazepines, and possibility to selectively racemize ‘wrong’ enantiomers of the alcohols 8 and 9 in the presence of Amberlite CG 400.     

Enantioselective cyanoformylation of aldehydes mediated by BINOLAM–AlCl as a monometallic bifunctional catalyst

BINOLAM–AlCl's, binaphthoxide aluminium chloride species generated in situ from either (R)- or (S)-3,3′-bis(diethylaminomethyl)-2,2′-dihydroxy-1,1′-binaphthalene (BINOLAM) behave as Lewis acid–Lewis base (LA-LB) catalysts in the enantioselective addition of methyl cyanoformate to aldehydes at room temperature, thereby leading to the asymmetric synthesis of (S)- or (R)-O-methoxycarbonyl cyanohydrins, respectively.     

A Facile and Clean Synthesis of Pyrimidine Derivatives via Three-component Reaction in Aqueous Media

A series of 5‐benzylidenepyrimidine‐2,4,6(1H,3H,5H)‐trione and 5,5′‐(arylmethylene) bis[6‐aminopyrimidine‐ 2,4(1H,3H)‐dione] derivatives were synthesized via the three‐component reactions of aromatic aldehyde, 6‐aminopyrimidine‐2,4‐dione and Medrum's acid in aqueous media in the presence of triethylbenzylammonium chloride. The structures of the products were affected by substituents of aromatic aldehydes.     

A Validated LC Method for Determination of the Enantiomeric Purity of Darifenacin in Bulk Drug and Extended Release Tablets

A new and accurate chiral liquid chromatographic method has been developed for the determination of enantiomeric purity of darifenacin [(S)-enantiomer] in bulk drugs and extended release tablets. Normal phase chromatographic separation was performed on an immobilized cellulose based chiral stationary phase (Chiralpak-IC) with n-hexane:ethanol:diethylamine (50:50:0.3, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹. The elution time was ~15 min. The resolution (R _s ) between the enantiomers was greater than four and interestingly the (R)-enantiomer was eluted prior to darifenacin in the developed method. The limit of detection (LOD) and limit of quantification (LOQ) for the (R)-enantiomer were 0.02 μg and 0.07 μg, respectively, for a 10 μL injection volume. The method was extensively validated in terms of linearity, precision and accuracy and satisfactory results were obtained. Robustness studies were also conducted. The sample solution stability of darifenacin was determined and the compound was found to be stable for a study period of 48 h.

     

Rhodium-Catalyzed Deuterioformylation of 3-Methyl-1-pentene

3-Methyl-1-pentene was deuterioformylated in the presence of rhodium-catalyst. The extent of attack on each face of the olefin was evaluated from the diastereomeric composition of both positional isomers obtained as the products. An overall preferred attack on the si-si face of the (S)-enantiomer, and on the re-re face of the (R)-enantiomer was found.     

Synthesis of Primary Amines by One-Pot Reductive Amination of Aldehydes

We report here a novel, one-pot, two-step reductive amination of aldehydes for the atom-economical synthesis of primary amines. The amination step has been carried out with hydroxylammonium chloride and does not require the use of a base. In the subsequent reduction step, a metal zinc/hydrochloride acid system has been used. This method is applicable to both aliphatic and aromatic aldehydes. The operational simplicity, the short reaction times, and the mild reaction conditions add to the value of this method as a practical alternative to the reductive amination of aldehydes.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Baker's yeast: improving the d-stereoselectivity in reduction of 3-oxo esters

The stereoselectivity of baker's yeast in the reduction of ethyl 3-oxopentanoate was shifted towards the corresponding (R)-hydroxy ester by sugar, heat treatment and allyl alcohol. The highest enantiomeric excesses obtained with baker's yeast with a good reduction capacity, 92–97%, were achieved by combining allyl alcohol and sugar; heat treatment did not increase the stereoselectivity further. With the use of this technique, ethyl (R)-3-hydroxyhexanoate, >99% ee, and ethyl (S)-4-chloro-3-hydroxybutanoate, 82–90% ee, were produced from the corresponding esters, and for the first time an excess of the (R)-enantiomer of ethyl 3-hydroxybutanoate was obtained with ordinary baker's yeast.     

A Validated Chiral LC Method for the Enantiomeric Separation of Repaglinide on Amylose Based Stationary Phase

A simple, isocratic, normal phase chiral HPLC method was developed and validated for the enantiomeric separation of repaglinide, (S)-(+)-2-ethoxy-4-N [1-(2-piperidinophenyl)-3-methyl-1-butyl] aminocarbonylmethyl] benzoic acid, an antidiabetic in bulk drug substance. The enantiomers of repaglinide were resolved on a ChiralPak AD-H (amylose based stationary phase) column using a mobile phase consisting of n-hexane: 2-propanol:trifluoroacetic acid (95:5:0.2 v/v/v) at a flow rate of 1.0 mL min⁻¹. The resolution between the enantiomers was found to be not >3.5 in optimized method. The presence of trifluoroacetic acid in the mobile phase played an important role, in enhancing chromatographic efficiency and resolution between the enantiomers. The developed method was extensively validated and proved to be robust. The calibration curve for (R)-enantiomer showed excellent linearity over the concentration range of 900 ng mL⁻¹ (LOQ) to 6,000 ng mL⁻¹. The limit of detection and limit of quantification for (R)-enantiomer were 300 and 900 ng mL⁻¹, respectively. The percentage recovery of the (R)-enantiomer ranged between 98.3 and 101.05% in bulk drug samples of repaglinide. Repaglinide sample solution and mobile phase were found to be stable up to 48 h. The developed method was found to be enantioselective, accurate, precise and suitable for quantitative determination of (R)-enantiomer in bulk drug substance.     

Practical Synthesis of 4-Benzylidene-2-phenyl-5(4H)-oxazolones

A simple and alternative method has been developed for the synthesis of 4-benzylidene-2-phenyl-5(4H)-oxazolones via reactions of hippuric acid with various aldehydes in the presence of 2-chloro-4,6-dimethoxy-1,3,5-triazine/N-methylmorpholine at 75 °C.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Enantioselective HPLC analysis of escitalopram oxalate and its impurities using a cellulose-based chiral stationary phase under normal- and green reversed-phase conditions

Normal-phase and reversed-phase high-performance liquid chromatography methods for the separation of the active pharmaceutical ingredient escitalopram from its (R)-enantiomer impurity have been developed on the cellulose-based Chiralcel OJ-H chiral stationary phase. Both methods share two features: they use ethanol as a cosolvent and are able to give a complete enantioseparation without interference from other associated chiral impurities. With the green eluent mixture ethanol–water–diethylammine 70:30:0.1 (v/v/v), the resolution between escitalopram and (R)-enantiomer was 2.09 at 30°C. The limits of quantification for the (S) and (R) enantiomers were 4.5 and 3.8 μg mL⁻¹, respectively.     

Chiral separation of amide conjugates of jasmonic acid by liquid chromatography

Summary Synthetic amide conjugates of (−)-jasmonic acid and its (+)-enantiomer were resolved by means of chiral liquid chromatography. The diastereomeric pairs prepared by chemical reaction of (±)-jasmonic acid with a series of (S)- or (R)-amino acids and with some (S)-amino acid alcohols were completely separated on Chiralpak AS using a mixture of n-hexane/2-propanal as mobile phase. The retention data indicate that the (−)-jasmonic acid conjugates eluted faster than those of the (+)-enantiomer, independent on the configuration of the bound amino acid. Likewise, enantiomeric derivatives of (±)-jasmonic acid and non-chiral amino acids were completely separated on the chiral stationary phase and showed the same elution sequence. The resolution factors,Rs, were found to range between 1.13 and 6.64. The separated compounds were chiropatically analyzed by measurement of the circular dichroism. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996