Surface characterizations of spin-coated films of ethylcellulose and hydroxypropyl methylcellulose blends

Films of pure ethylcellulose (EC) and hydroxypropyl methylcellulose (HPMC) polymers and EC/HPMC blends were prepared from solutions by spin coating where isopropyl alcohol (IPA), water, and IPA/water cosolvent were used as solvents. Surface structures of the films were investigated using optical microscopy, atomic force microscopy (AFM), and Raman mapping and spectroscopy. For the films prepared from EC/HPMC blend solutions using the IPA/water cosolvent, different domain structures such as islands or pits and phase separation between EC and HPMC were observed by optical microscopy and AFM. The nature of the polymer components on the surface of the films was identified by Raman mapping and spectroscopy. Experimental results also indicated that polymer composition, solvent, and temperature during spin coating had significant impacts on surface structures of the films.     

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems

The polymerization-induced phase-separation process of polyethersulfone (PES)-modified epoxy systems was monitored in situ continuously on a single sample throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), scanning electronic microscopes (SEM), and a rheometry instrument. At specific PES content a viscoelastic transformation process of phase inversion morphology to bicontinuous was found with an optical microscope. The rheological behavior during phase separation corresponds well with the morphology development. Light-scattering results monitoring the phase-separation process of systems with final phase inversion morphology show a typical exponential decay procedure of scattering vector qm. The characteristic relaxation time of phase separation can be described well by the WLF equation.     

Time-resolved light scattering studies of Spin-coated titanium dioxide

Spin coating of titanium alkoxides is a fast and straightforward method of forming compact and durable titanium dioxide thin films. In this report, an optical interference technique is used to understand the dynamics of titanium dioxide thin film formation during the spin coating process of titanium (IV) ethoxide sols, and a 4-stage thinning model is proposed. Optical monitoring of interference fringes as a function of time enables determination of the time-dependent film thickness through measurement of the interference fringe separation while the sol to gel transition can be monitored by analyzing the fringe visibility. For films that are spun at 2,000 rpm or faster, a spin duration of 5 s is sufficient for the film to reach its final thickness. At a given spin speed, spin times longer than 5 s do not affect the final film thickness. However, thinner final film thicknesses can be achieved by increasing the spin speed. All films were found to densify on annealing with an annealed thickness approximately 0.4 times that of the pre-anneal thickness regardless of spin speed. Spin-coated titanium dioxide films are expected to play an important role in low-cost and scalable next generation solar cells employing dyes and quantum dots as the light harvesting agents.     

Polymerization-induced phase separation in polyether-sulfone modified epoxy resin systems: effect of curing reaction mechanism

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.     

聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混相分离过程的标度行为与逾渗结构

本文用激光光散射和光学显微镜方法研究了聚甲基丙烯酸甲脂/聚醋酸乙烯酯共混体系不稳相分离过程最大散射强度I_m(t,T)和相应波矢q_m(t,T)随时间变化规律及相区的逾渗结构。实验结果表明:I_m(t,T)和q_m(t,T)与时间t满足简单的标度关系I_m(t,T)～t~β,q_m(t,T)～t~(-a)。且标度关系β=3α成立,首次揭示了相态结构的分维特征,给出了计算相态结构分维数的简便方法,其分维数D值约为1.68±0.03,与逾渗模型给出的D值接近。     

Interactions between cellulose nanocrystals and anionic and neutral polymers in aqueous solutions

Physical structures of aqueous cellulose nanocrystal (CNC) suspensions in anionic polyelectrolyte carboxymethyl cellulose (CMC) and non-ionic poly(ethylene oxide) (PEO) were investigated by studying their cross polarized, polarized optical microscope (POM) images and dynamic light scattering, zeta potential, ¹H spin–lattice relaxation nuclear magnetic resonance (NMR) data. The presence of anionic CMC and nonionic PEO in CNC suspensions led to two different kind of interactions. Semi-dilute CNC suspensions showed first gel-like behavior then phase separation by adding only semi-dilute un-entangled CMC polymer solutions, whereas the addition of PEO didn’t cause any significant change. POM images showed the phase transitions of CNC suspensions in the presence of CMC solutions from the isotropic state to nematic and chiral nematic phases. Dynamic light scattering, zeta potential and ¹H spin–lattice relaxation NMR data presented further arguments to explain polymer-CNC interactions in CMC and PEO solutions. ¹H NMR solvent relaxation technique determined the adsorption and depletion interactions between polymers and CNC. The minima in spin–spin specific relaxation rate constant showed the depletion of CNC nanoparticles in CMC. It is believed that the depletion flocculation was the case for the effects of CMC polymer chains in CNC suspensions. PEO was adsorbed on CNC surfaces and caused only weak depletion interactions due to the presence of soft particles.     

Kinetics of phase separation by spinodal decomposition in a liquid-crystalline polymer solution

Time-resolved light scattering studies have been undertaken for elucidating the dynamics of phase separation in aqueous HPC (hydroxypropyl cellulose) liquid-crystalline solutions. The HPC/water system phase separates during heating and returns to a single phase upon cooling. The phase diagram of thermally induced phase separation was subsequently established on the basis of cloud point measurements. For kinetic studies, T (temperature) jump experiments of 10 per cent aqueous HPC solutions were undertaken. Phase separation occurs in accordance with the spinodal decomposition mechanism. At low T jumps or in reverse quenched experiments, the scattering maximum remains invariant as predicted by the linearized Cahn-Hilliard theory. However, at large T jumps, the SD is dominated by non-linear behaviour in which scattering peaks move to low scattering angles. The latter process has been identified to be a coarsening mechanism associated with the coalescence of phase separated domains driven by a surface tension. A reduced plot has been established with dimensionless variables Q and t. It was found that the scaling law is not valid over the entire spinodal process. The time evolution of the scattering profiles of 10 per cent HPC solutions, following a Tjump to 49°C, is tested with the scaling law of Furukawa. It seems that the kinetics of phase separation at 10 per cent solution resemble the behaviour of off-critical mixture.     

Rheological behaviors and structural transitions in a polyethersulfone-modified epoxy system during phase separation

The rheological behaviors and gelation transitions in a polyethersulfone (PES)-modified epoxy system during phase separation were studied by rheometry, time-resolved light scattering, and differential scanning calorimetry. Two separate structural transitions in the curing process of the blend were identified as the first one because of phase separation and the second one related to cross-linking reaction of epoxy resin. Both the times of the two structural transition at different temperatures could be described well by the Arrhenius type equation. The complex viscosity exhibits an exponential growing process during phase separation at various temperatures, correlating to the light-scattering results. The exponential behavior of complex viscosity could be attributed to the viscoelastic flow of epoxy-rich escaping from PES-rich during phase separation process.     

Latex-functionalized monolithic columns for the separation of carbohydrates by micro anion-exchange chromatography

A novel stationary phase for micro ion chromatography has been prepared by coating a porous poly(butyl methacrylate-co-ethylene dimethacrylate-co-2-acrylamido-2-methyl-1-propanesulfonic acid) monolith with quaternary amine-functionalized latex particles via simple electrostatic binding. This stationary phase enabled the separation of saccharides in the mobile phase with a high-pH value consisting of aqueous ammonia solution in anion-exchange mode using evaporative light scattering for detection. Effects of both porous properties of the monolithic stationary phase and chromatographic conditions on the separation ability were studied. Under optimized conditions, an efficient separation of seven saccharides was achieved in less than 10 min. The stationary phase also enables the separation of saccharides obtained by the enzymatic hydrolysis of corn starch.     

Kinetics of phase separation by spinodal decomposition in a liquid-crystalline polymer solution

Abstract

Time-resolved light scattering studies have been undertaken for elucidating the dynamics of phase separation in aqueous HPC (hydroxypropyl cellulose) liquid-crystalline solutions. The HPC/water system phase separates during heating and returns to a single phase upon cooling. The phase diagram of thermally induced phase separation was subsequently established on the basis of cloud point measurements. For kinetic studies, T (temperature) jump experiments of 10 per cent aqueous HPC solutions were undertaken. Phase separation occurs in accordance with the spinodal decomposition mechanism. At low T jumps or in reverse quenched experiments, the scattering maximum remains invariant as predicted by the linearized Cahn-Hilliard theory. However, at large T jumps, the SD is dominated by non-linear behaviour in which scattering peaks move to low scattering angles. The latter process has been identified to be a coarsening mechanism associated with the coalescence of phase separated domains driven by a surface tension. A reduced plot has been established with dimensionless variables Q and t. It was found that the scaling law is not valid over the entire spinodal process. The time evolution of the scattering profiles of 10 per cent HPC solutions, following a Tjump to 49°C, is tested with the scaling law of Furukawa. It seems that the kinetics of phase separation at 10 per cent solution resemble the behaviour of off-critical mixture.     

Modification of the morphology of P(S-b-EO) templated thin TiO2 films by swelling with PS homopolymer

For the controlled modification of sol-gel-templated polymer nanocomposites, which are transferred to a nanostructured, crystalline TiO2 phase by a calcination process, the addition of a single homopolymer was investigated. For the preparation, the homopolymer polystyrene (PS) is added in different amounts to the diblock copolymer P(S-b-EO) acting as a templating agent. The homopolymer/diblock copolymer blend system is combined with sol-gel chemistry to provide and attach the TiO2 nanoparticles to the diblock copolymer. So-called good-poor solvent-pair-induced phase separation leads to the formation of nanostructures by film preparation via spin coating. The fabricated morphologies are studied as a function of added homopolymer before and after calcination with atomic force microscopy, field emission scanning electron microscopy, and grazing incidence small-angle X-ray scattering. The observed behavior is discussed in the framework of controlling the block copolymer morphologies by the addition of homopolymers. At small homopolymer concentrations, the increase in homopolymer concentration changes the structure size, whereas at high homopolymer concentrations, a change in morphology is triggered. Thus, the behavior of a pure polymer system is transferred to a more complex hybrid system.     

Formation of ordered microphase-separated pattern during spin coating of ABC triblock copolymer

In this paper, the authors have systematically studied the microphase separation and crystallization during spin coating of an ABC triblock copolymer, polystyrene-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) (PS-b-P2VP-b-PEO). The microphase separation of PS-b-P2VP-b-PEO and the crystallization of PEO blocks can be modulated by the types of the solvent and the substrate, the spinning speed, and the copolymer concentration. Ordered microphase-separated pattern, where PEO and P2VP blocks adsorbed to the substrate and PS blocks protrusions formed hexagonal dots above the P2VP domains, can only be obtained when PS-b-P2VP-b-PEO is dissolved in N,N-dimethylformamide and the films are spin coated onto the polar substrate, silicon wafers or mica. The mechanism of the formation of regular pattern by microphase separation is found to be mainly related to the inducement of the substrate (middle block P2VP wetting the polar substrate), the quick vanishment of the solvent during the early stage of the spin coating, and the slow evaporation of the remaining solvent during the subsequent stage. On the other hand, the probability of the crystallization of PEO blocks during spin coating decreases with the reduced film thickness. When the film thickness reaches a certain value (3.0 nm), the extensive crystallization of PEO is effectively prohibited and ordered microphase-separated pattern over large areas can be routinely prepared. When the film thickness exceeds another definite value (12.0 nm), the crystallization of PEO dominates the surface morphology. For films with thickness between these two values, microphase separation and crystallization can simultaneously occur.     

Real time laser interference microscopy for bar‐spread polystyrene/poly(methyl methacrylate) blends

We demonstrate that real‐time laser interference microscopy can be used to directly observe the dynamics of film formation and phase separation processes for a bar‐spread polystyrene/poly(methyl methacrylate) blend. The ability to dynamically image laser interference patterns allows compete drying curves and polymer content to be determined throughout the film formation process. The polymer content at which phase separation structure first is observed in the interference micrograph sequence is in good agreement with calculated spinodal curves. Morphology evolution proceeds from phase separation onward via coarsening and coalescence to arrive at the final domain structure. In comparison, spin coating the same polymer blend results in structure evolution being quenched further from equilibrium due to the faster drying rate. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 985–992     

Time-resolved simultaneous polarized and depolarized light scattering system with high sensitivity to optical anisotropy: application to phase separation of an optically isotropic liquid mixture

Depolarized light scattering is widely used to probe the spatial correlation of optical anisotropy in crystals, liquid crystals, and viscoelastic materials under stress, and a powerful means to study a non-equilibrium pattern evolution process of such a system. To follow the temporal change in the diagonal and off-diagonal contributions of the dielectric tensor, it is highly desirable to measure two-dimensional (2D) polarized (HH: horizontally transmitted, horizontally received) and depolarized (VH: vertically transmitted, horizontally received) scattering patterns simultaneously in a time-resolved manner. We develop a light scattering system with a video-rate time resolution as well as very high sensitivity to optical anisotropy. To detect extremely weak VH scattering from a sample without suffering from residual birefringence of the optical system itself and leakage of strong HH scattering signals, we use an objective lens specially designed for polarizing microscopy and Glan-laser prisms, respectively. This system enables us to experimentally elucidate the origin of VH scattering: we use the ratio of the VH and HH scattering intensity as a fingerprint for whether a 2D VH scattering pattern is caused by (i) optical anisotropy (intrinsic birefringence) or merely by (ii) spatial inhomogeneity of optically isotropic materials. We verify the validity of this method for a process of phase separation in a binary mixture of isotropic liquids. The simultaneous HH and VH measurement allows us to directly estimate the ratio of VH and HH scattering intensity accurately. The careful comparison of this ratio with a simple theory unambiguously demonstrates that the 2D VH scattering pattern is caused by the scattering angle dependence of the diffraction efficiency of light with the two polarization directions. That is, the origin of VH scattering is due to geometrical effects of the inhomogeneous distribution of the refractive index and not due to optical birefringence, as it should be for the optically isotropic sample. This method using the ratio of VH and HH scattering intensity may be widely used for distinguishing the two types of origins for a VH scattering pattern in an unambiguous manner.     

聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混相分离过程的标度行为与逾渗结构

本文用激光光散射和光学显微镜方法研究了聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混体系不稳相分离过程最大散射强度I_m(t,T)和相应波矢q_m(t,T)随时间变化规律及相区的逾渗结构.实验结果表明:I_m(T,t)和q_m(t,T)与时间t满足简单的标度关系I_m(t,T)～t~β,q_m(t,T)～t~(-α),且标度关系β=3α成立.揭示了相态结构的分维特征.给出了计算相态结构分维数的简便方法,其分维数D值约为1.64±0.03.与逾渗模型给出的D值接近.     

Multivariable structural characterization of semicrystalline polymer blends by small‐angle light scattering

A new multi‐variable‐measurement approach for characterizing and correlating the nanoscale and microscale morphology of crystal‐amorphous polymer blends with melt‐phase behavior is described. A vertical small‐angle light scattering (SALS) instrument optimized for examining the scattering and light transmitted from structures ranging from 0.5 to 50 μm, thereby spanning the size range characteristic of the initial‐to‐late stages of thermal‐phase transitions (e.g., melt‐phase separation and crystallization) in crystal‐amorphous polymer blends, was constructed. The SALS instrument was interfaced with differential scanning calorimetry (DSC), and simultaneous SALS/DSC/transmission measurements were performed. We show that the measurement of transmitted light and SALS under H_V (cross‐polarized) optical alignments during melting can be used to reliably measure the thermodynamic (e.g., crystal melting and melt‐phase separation temperatures) and structural variables (e.g., crystalline fraction within the superstructures and volume fraction of superstructures) necessary for describing the multiphase behavior of crystal‐amorphous blends in one combined measurement. We also evaluate the orientation correlations of crystalline volume elements within the superstructures. Our results indicate that simultaneous measurement of transmitted light can provide a reliable estimate of the total scattering from density and orientation fluctuations and the melt‐phase separation temperature of polymer blends. For solution‐cast poly(?‐caprolactone)/poly(D,L‐lactic acid) blends, our multivariable measurements during melting provide the parameters necessary to generate a crystal–liquid and liquid–liquid phase diagram and characterize the solid‐state morphology. This opens up the challenge to explore use of our vertical SALS instrument as a rapid and convenient method for developing structure–property relationships for crystal‐amorphous polymer blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2714–2727, 2002     

Design of the ultimate behavior of tetrafunctional epoxies modified with polysulfone by controlling microstructure development

The reaction-induced phase separation in a tetrafunctional epoxy–cyclic anhydride system modified with polysulfone (PSF) was followed by optical microscopy (OM), light scattering (LS), and scanning electron microscopy (SEM). The selected system was N,N,N′,N′-tetraglycidyl-4,4′-diamino diphenylmethane cured with methyl tetrahydrophthalic anhydride, in the presence of variable PSF concentrations. The different experimental techniques allow us to establish the phase separation mechanism. For modifier concentrations close to the critical point, 10 and 15 wt % PSF, phase separation proceeded by spinodal demixing (SD). For a modifier concentration much lower than the critical point, 5 wt % PSF, phase separation occurred via the nucleation and growth (NG) mode. For 7.5 wt % PSF, depending on the cure temperature, SD or NG was observed. Dynamic mechanical behavior of the resulting materials had been discussed based on fractionation of different species during the phase separation process. The fracture toughness increased significantly when bicontinuous (10 wt % PSF) or phase-inverted (15 wt % PSF) structures were generated. For mixtures containing 15 wt % PSF, the dependence of fracture toughness on the stoichiometric ratio (anhydride groups/epoxy groups) was analyzed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2711–2725, 1999     

Direct observation of morphological development during the spin‐coating of polystyrene–poly(methyl methacrylate) polymer blends

We present results of the direct observation, in real‐space, of the phase separation of high molecular weight polystyrene and poly(methyl methacrylate) from ortho‐xylene using our newly developed technique of high speed stroboscopic interference microscopy. Taking a fixed concentration (3 wt % in o‐xylene) at a fixed composition (1:4 by weight) and by varying the rotational rate during the spin‐coating process, we are able to observe the formation of a range of phase separated bicontinuous morphologies of differing length‐scales. Importantly, we are able to show that the mechanism by which the final phase separated structure is formed is through domain coarsening when rich in solvent, before vitrification occurs and fixes the phase separated structure. The ability to directly observe morphological development offers a route toward controlling the length‐scale of the final morphology through process control and in situ feedback, from a single stock solution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B Polym. Phys. 2013, 51, 875–881     

环氧化聚丁二烯-聚苯乙烯嵌段共聚物对聚苯醚/环氧体系反应诱导 相分离行为的影响

采用扫描电镜、光学显微镜和光散射仪研究了环氧化聚丁二烯-聚苯乙烯嵌段共聚物(EBS)对聚苯醚(PPO)/双酚A型环氧树脂(DGEBA)/4,4’-二(2,6-二甲基苯胺基)甲烷(DIM-DDM)体系反应诱导相分离行为的影响. 实验结果表明, EBS的加入对PPO/DGEBA/DIM-DDM体系反应诱导相分离的演化过程有阻滞作用. 随着EBS加入量的增加, 体系形成双连续相结构所需的PPO含量范围变宽, 而对于相同PPO含量、形成双连续相的体系则相结构尺寸减小.     

Reaction-induced phase separation in rubber-modified epoxy resin

The phase separation mechanism,and structure development during curing of epoxy with a novel liquid rubber-ZR were investigated by time-resolved light scattering,optical microscope and differential scanning calonmetry (DSC) The mixture loaded with curing agent was a single-phase system in the early stage of curing.When the cure reaction proceeded,phase separation took place via the spinodal decomposition induced by polymerization of epoxy resin.This was supported by the characteristic change of light scattering profile with curing time.Cure reaction plays an important role in the progress of phase separation.The bigger the cure reaction rate is,the longer periodic distance will be.The overall two-phase structure was basically locked in when the conversion approached 80% estimated by DSC,and finally the co-continuous two-phase structure was successfully obtained.