Microwave-Assisted Synthesis and Characterization of Poly(itaconic acid) Grafted Gellan Gum

Poly(itaconic acid) was grafted on GG in aqueous medium under microwave irradiation using a catalytic amount of BPO. Grafted copolymers (GG-g-PIA) were characterized by FT-IR, TGA, and SEM techniques. The influence of microwave power, exposure time, and composition of the reaction mixture on extent of grafting was studied. Conditions for obtaining the highest extent of grafting were optimized. The rate of grafting was determined from weight measurements. The overall activation energy for grafting is found to be to be 28.3 kJ/mol, indicating the possibility of occurrence of the grafting process with absorption of low thermal energy.     

Synthesis and characterization of original 2-(dimethylamino)ethyl methacrylate/poly(ethyleneglycol) star-copolymers

Novel synthetic transfection vectors with linear triblock and star-shaped diblock copolymer architectures have been synthesized by atom transfer radical polymerization (ATRP). Based on 2-(dimethylamino)ethyl methacrylate (DMAEMA) and copolymerization with poly(ethyleneglycol) α-methoxy, ω-methacrylate (MAPEG), the synthesis was realized using CuBr ligated with 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) as catalytic complex and either ethyl 2-bromoisobutyrate (EBⁱB) or bis(α-bromoisobutyryl) N-methyl diethanolamine (DEA) or tris(α-bromoisobutyryl) triethanolamine (TEA) as (multifunctional)initiator. The polymers were characterized by GPC and NMR. The solution properties of these homopolymers and palm-tree-like copolymers were investigated by viscometry either in pure water or in buffered aqueous solutions. Interestingly, all the synthesized polymers show polyelectrolyte effect in Millipore water (25 °C) and in Hepes (20 mM) buffer solution (pH 7.4, NaCl 155 mM, 25 °C). Fitting of these viscometric data according to either Fuoss or Fedors equation allows for calculating the intrinsic viscosity of the polymers. These results are compared with dynamic light scattering (DLS) experiments to determine absolute masses. Finally, DEA based palm-tree-like copolymer is investigated to AFM measurement and micelles were observed at pH 8.     

Synthesis and characterization of amphiphilic star copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Effects of architecture and composition

Six amphiphilic star copolymers comprising hydrophilic units of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and hydrophobic units of methyl methacrylate (MMA) were prepared by the sequential group transfer polymerization (GTP) of the two comonomers and ethylene glycol dimethacrylate (EGDMA) cross-linker. Four star-block copolymers of different compositions, one miktoarm star, and one statistical copolymer star were synthesized. The molecular weights (MWs) and MW distributions of all the star copolymers and their linear homopolymer and copolymer precursors were characterized by gel permeation chromatography (GPC), while the compositions of the stars were determined by proton nuclear magnetic resonance (¹H NMR) spectroscopy. Tetrahydrofuran (THF) solutions of all the star copolymers were characterized by static light scattering to determine the absolute weight-average MW () and the number of arms of the stars. The of the stars ranged between 359,000 and 565,000 g mol⁻¹, while their number of arms ranged between 39 and 120. The star copolymers were soluble in acidic water at pH 4 giving transparent or slightly opaque solutions, with the exception of the very hydrophobic DMAEMA₁₀-b-MMA₃₀-star, which gave a very opaque solution. Only the random copolymer star was completely dispersed in neutral water, giving a very opaque solution. The effective pKs of the copolymer stars were determined by hydrogen ion titration and were found to be in the range 6.5-7.6. The pHs of precipitation of the star copolymer solutions/dispersions were found to be between 8.8-10.1, except for the most hydrophobic DMAEMA_10-b-MMA₃₀-star, which gave a very opaque solution over the whole pH range.     

Poly(2-(dimethylamino)ethyl methacrylate) brushes fabricated by surface-mediated RAFT polymerization and their response to pH

In this study, well-defined, high density poly(2-(dimethylamino)ethyl methacrylate) [poly(DMAEMA)] brushes were fabricated by the combination of the self-assembly of a monolayer of RAFT agent and surface-mediated RAFT polymerization. The whole fabrication process of the poly(DMAEMA) was followed by water contact angles, grazing angle-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Kinetic studies revealed a linear increase in poly(DMAEMA) film thickness with polymerization time, indicating that the chain growth from the surface was a controlled process. Characterization of the poly(DMAEMA) brushes, such as molecular weight and thickness determination, were measured by gel permeation chromatography, and ellipsometry, and the grafting density was estimated. The pH response of the poly(DMAEMA) brushes was further investigated and the results verified the “brush-like” to “mushroom-like” transition of the poly(DMAEMA) chains due to the reversible protonation/deprotonation upon changing the solution pH.     

温度/pH敏感性接枝共聚物水凝胶P(DMAEMA-g-NIPAM)的 合成及性质研究

利用大分子单体技术, 采用自由基溶液聚合合成了温度/pH敏感性聚甲基丙烯酸-N,N-二甲氨基乙酯接枝聚N-异丙基丙烯酰胺[P(DMAEMA-g-NIPAM)]水凝胶. 用红外光谱及扫描电镜对凝胶的组成及形貌进行了表征. 凝胶的去溶胀和溶胀动力学研究表明, 所合成的凝胶具有温度和pH敏感性. 与传统的聚丙烯酸系水凝胶相比, P(DMAEMA-g- NIPAM)具有相反的pH敏感性; P(DMAEMA-g-NIPAM)凝胶在55 ℃时具有较快的去溶胀速率, 随着凝胶中接枝链PNIPAM量的增加, 凝胶的去溶胀速率加快.     

Target grafting of poly(2-(dimethylamino)ethyl methacrylate) to biodegradable block copolymers

A series of copolymers composed of methoxy poly(ethylene glycol) and a hydrophobic block of poly(ɛ-caprolactone-co-propargyl carbonate) grafted with poly(2-[dimethylamino]ethyl methacrylate) was synthesized by combining ring opening polymerization, azide-alkyne click reaction, and atom transfer radical polymerization (ATRP). Well-defined copolymers with a target composition and a tailored structure were achieved via the grafting from approach by using a single catalytic system for both click reaction and ATRP. Kinetic studies demonstrated the controlled/living character of the employed polymerization methods. The thermal properties and self-assembly in aqueous medium of the graft copolymers were dependent on their composition. The resulting polymeric materials showed low cytotoxicity toward L929 cells, demonstrating their potential for biomedical applications. This type of materials containing cationic side chains tethered to biocompatible and biodegradable segments could be the basis for promising candidates as drug and gene delivery systems.     

Solution properties of well-defined 2-(dimethylamino)ethyl methacrylate-based (co)polymers: A viscometric approach

Well-defined poly(2-(dimethylamino)ethyl methacrylate)-based (co)polymers with various molar masses were synthesized by atom transfer radical polymerization (ATRP) using CuBr ligated with 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) as catalyst, and ethyl 2-bromoisobutyrate (EBiB) or α-methyl, ω-(2-bromoisobutyrate) poly(ethylene glycol) (mPEG_x-BiB) as (macro)initiator. The solution properties of these (co)polymers were investigated by viscometry either in pure water or in concentrated buffer solutions. It comes out that reduced viscosity in pure water is strongly affected by the molar mass of poly(2-(dimethylamino)ethyl methacrylate) block but also by the quaternization degree of tertiary amino groups. In fact, a polyelectrolyte effect can only be detected when the charge density per macromolecule reaches a critical value either in terms of molar mass or quaternization degree. Fitting of viscometry data according to either Huggins or Fuoss and Fedors equation also allows calculating the intrinsic viscosity and approaching the overlap concentration.     

Synthesis and Characterization of Poly(Methyl Methacrylate) Grafted from Acacia Gum

Graft polymerization of methyl methacrylate onto acacia gum has been studied in detail. The grafting was found to be optimal under the following reaction conditions: gum at 0.4 g/dL, monomer at 7.52 × 10^?;2 mol/dL, ceric ammonium sulfate at 15.81 × 10^?;4 mol/dL, H₂SO₄ at 0.037 mol/dL, temperature at 50 °C and time at 3.0 h. Fourier transform infrared spectroscopy was sed for the confirmation of grafting. Thermal and physical properties of the copolymer were studied. A probable mechanism of polymerization has been suggested based on reaction kinetics.     

Preparation and Characterization of pH-Sensitive Microgels of Poly((2-dimethylamino) ethyl methacrylate)

Summary: pH-sensitive microgels of poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared by dispersion polymerization of 2-dimethylamino ethyl methacrylate in a mixed solvent of water/ethanol. ¹HNMR, FTIR and SEM were used to confirm the chemical structure and morphological properties of the resulting microgels. Dynamic Light Scattering (DLS) was used to measure the hydrodynamic diameter of the particles. SEM micrographs showed that the microgel particles have a diameter of about 100–200 nm in dry state. Mean hydrodynamic diameter of the particles at their collapsed state at pH = 9.5 was found to be about 150 nm. DLS measurements at various pH values showed that the prepared microgels have a volume phase transition around pH = 8 at which the hydrodynamic diameter decreased from about 470 nm to around 150 nm corresponding to a 32 fold change in the mean volume of a microgel particle.     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

Thermal and pH dual responsive polyurethane/2-(diisopropylamino)ethyl methacrylate hybrids: Synthesis,characterization, and swelling behavior

This article describes the synthesis and characterization of stimuli-sensitive hybrid films using 2-(diisopropylamino)ethyl methacrylate (DPA), and a polyurethane (PU) base on isophorone diisocyanate. Hybrid films with different amounts of DPA present good film and physicochemical properties. Characterization techniques such as Fourier transform infrared, UV–visible, modulate differential scanning calorimetry, and thermogravimetric analysis reveal chemical interactions between PU and DPA groups. Swelling behavior of films shows a dependence on DPA content, pH, and temperature and different mechanisms of water uptake in response to pH and temperature variations. Hybrid systems would allow controlling water absorption not only through pH or temperature but also from the chosen PU/DPA proportion.     

Synthesis of Comblike Poly（methyl methacrylate） by Atom Transfer Radical Polymerization with Poly（ethyl 2-bromoacrylate） as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and ^1H NMR.     

甲基丙烯酸N,N-二甲氨基乙酯/丙烯酸N,N-二甲氨基乙酯的可逆加成断裂链转移聚合研究

合成了二硫代苯甲酸2- (乙氧基羰基)异丙酯(ECPDB)、二硫代苯甲酸异丙苯酯(CDB)、二硫代苯甲酸1 苯基乙酯(PEDB) 3种二硫代苯甲酸酯链转移剂.以这3种转移剂为基础,用凝胶渗透色谱和核磁共振测试了甲基丙烯酸N ,N 二甲氨基乙酯(DMAEMA)和丙烯酸N ,N 二甲氨基乙酯(DMAEA)两种碱性单体的可逆加成断裂链转移(RAFT)聚合的聚合物分子量、分子量分布和结构.发现有的聚合体系聚合物分子量分布较窄,但实验数均分子量与理论数均分子量相差较大;有的体系则转化率很低,聚合物分子量很小.这些可能是由聚合体系中单体活性和链转移剂链转移能力之间的匹配不太协调,使可逆加成断裂链转移快速平衡反应发生偏移或破坏造成的.因此,可通过更换单体或链转移剂来调节这种匹配,从而使可逆加成断裂链转移快速平衡保持稳定,达到聚合更可控,实验分子量与理论分子量更接近,分子量分布更窄的目的.     

Graft Copolymerization of (Dimethylamino)Ethyl Methacrylate onto Chitosan Initiated by Ceric Ammonium Nitrate

Abstract

(Dimethylamino)ethyl methacrylate (DMAEMA) was grafted onto chitosan using ceric ammonium nitrate as initiator in acetic acid solution. The effects of reaction variables on the grafting percentage and efficiency percentage were investigated, including the amounts of monomer and initiator, reaction time and reaction temperature. The grafted copolymers were confirmed by FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results of TGA and DSC indicated the improvement of thermal stability for chitosan‐g‐poly(PDMAEMA). Solubility test revealed the improved hydrophilicity of grafted chitosan in aqueous acetic acid solution, and its swelled behavior in mixtures of glacial acetic acid and anhydrous ethanol (the ratios of 1:1 and 1:2, v/v). The grafted copolymer possessed amphiphilic structure and exhibited properties of polymeric surfactant.     

N-[1-(取代苯基)乙基]-2-羟基苯甲酰肼的合成、表征及抑菌活性

依据邻羟基二苯醚及芳香肼类化合物的抗菌特性, 以邻羟苯基为分子核心, 酰肼键为桥基, 设计合成了7种未见报道的N-(取代苯基)乙基-2-羟基苯甲酰肼类化合物. 以水杨酸甲酯为原料, 经肼解反应后与取代苯乙酮缩合, 再与硼氢化钠反应制得目标化合物, 化合物结构经IR, ¹H NMR和元素分析等证实. 抗菌活性测试结果表明, 该类化合物对不同菌株的抑菌活性具有明显的选择性和特异性. 当质量浓度为1×10^-4 g/mL时, 化合物3b和3e对大肠杆菌和白色念珠菌的抑菌率高达100%, 有极强的抑菌活性; 所有化合物对金黄色葡萄球菌的抑菌率均大于70%, 有一定的抑菌活性. 构效关系分析结果表明, 苯基中引入Cl或Br等卤原子能显著增强化合物的抑菌活性, 而引入-NO₂及-CH₃基团则会降低其抑菌活性.     

氧阴离子引发甲基丙烯酸-2-(N,N-二甲氨基)乙酯聚合制备Y型大分子单体

氧阴离子聚合(Oxyanion－initiated Polymerization)是一类新型的聚合方法[‘,’‘．利用个乙烯基苦醇钾作为功能性引发剂,引发甲基丙烯酸－2－(NJ－二乙氨基)乙酯聚合,形成末端带可聚合官能团的大分子单体‘”“．氧阴离子引发剂通常难以引发甲基丙烯酸烷基酯单体聚合,但却能引发甲基丙烯酸氨基酯类单体发生聚合．由于氨基乙酯基7位上氮原子的供电子性,它能与钾离子形成螫合物,使氧阴离子的亲核性增加,从而更具有活性,引发单体聚合．氧阴离子聚合具有速度快、活性高、反应温度接近室温和产物的单分散性好等特点．尽管目前还不清楚这种反…     

Synthesis,Crystal Structure and Antitumor Activities of N-(2-(1H-indol-3-yl)ethyl)-2-nitroaniline

The title compound, N-(2-(1H-indol-3-yl)ethyl)-2-nitroaniline(C16H15N3O2, Mr = 281.31), has been synthesized by the multicomponent reaction of milder Ullmann, and its structure was characterized by 1H NMR, 13 C NMR, IR, H RMS(ESI) and single-crystal X-ray diffraction. It crystallizes in monoclinic, space group I2/c with a = 15.0212(10), b = 9.4911(6), c = 20.3075(13) A, β = 100.776(7)o, V = 2844.1(3)A3, Z = 8, Dc = 1.314 g/cm3, F(000) = 1184.0, μ = 0.089 mm-1, the final R = 0.0574 and w R = 0.1688 for 1701 observed reflections(I 2σ(I)). X-ray analysis indicates three major N(2)–H(2)···O(2), C(13)–H(13)···O(2), N(2)–H(2)···N(3) hydrogen bonds and π-π stacking interactions in the crystal structure. The preliminary biological test shows that the title compound has a good antitumor activity against A549 in vitro with the IC50 value of 35 μmol/L.     

聚甲基丙烯酸甲酯-丙烯酸酰胺嵌段共聚物的合成与表征

引发剂;苯胺;聚甲基丙烯酸甲酯-丙烯酸酰胺嵌段共聚物的合成与表征