Effect of Organic Solvents on the Electrodeposition of Copper from Acidified CuSO4

Using Guerbet tetradecyl alcohol C₁₄GA (synthesized by Guerbet reaction using 1-heptanol as raw material) as intermediate, sodium Guerbet tetradecyl polyoxyethylene ether sulfates [C₁₄GA(EO)_nS, n = 1, 2, 4] were obtained through following steps: synthesizing Guerbet tetradecyl polyoxyethylene ether alcohols [C₁₄GA(EO)_nH, n = 1, 2, 4] by Williamson reaction, then esterifying with chlorosulfonic acid so as to form Guerbet tetradecyl polyoxyethylene ether alcohol sulfates [C₁₄GA(EO)_nSO₃H, n = 1, 2, 4], and finally neutralizing with sodium hydroxide; while sodium Guerbet tetradecyl sulfate(C₁₄GAS) was synthesized only through esterifying and neutralizing reactions. The structures of these anionic surfactants were determined by infrared, nuclear magnetic resonance, and element analysis. The surface activity of these surfactants was studied by means of surface tension. The results have shown that these surfactants possess higher surface activity than the common surfactant C₁₂H₂₅OSO₃Na. Branched-tail structure coming from Guerbet alcohol makes the anionic surfactant (C₁₄GAS) have higher critical micelle concentration (CMC) and better effectiveness in lowering the interface tension between air and water than their linear counterpart (C₁₄H₂₉OSO₃Na). Introducing oxyethyene group into the place between head group and tail group of the surfactant molecule with branched tail can lower the CMC, γ_cmc, and Krafft point. And the effectiveness for reducing the CMC, γ_cmc, Γ_max, and Krafft point of surfactant increased with the increase of oxyethylene group number (n = 1, 2, 4). The relationship between the molecular structure and surface activity of surfactant is discussed.     

Adsorption and Corrosion Inhibition Behavior of L-Cystine and Synergistic Surfactants Additives on Mild Steel in 0.1 M H2SO4

The adsorption and corrosion inhibition behavior of mild steel in 0.1 M H₂SO₄ in presence of L-cystine and L-cystine in combination with surfactants sodium dodecyl sulfate and cetyltrimethyl ammonium bromide at 30–60°C was investigated using weight loss and potentiodynamic polarization measurements. Inhibition efficiency of L-cystine is synergistically enhanced on addition of surfactants. Surface morphology of corroded steel samples was evaluated using scanning electron microscopy and atomic force microscopy, which further confirmed the existence of an adsorbed protective film on the mild steel surface. Calculated thermodynamic parameters reveal that adsorption process is spontaneous and obey Langmuir adsorption isotherm.     

Effect of Ionic Surfactants on the Adsorption of Quercus infectoria Natural Dye on Cotton Fiber: A Kinetic Study

The adsorption kinetics of Quercus infectoria natural dye on cotton in the absence and presence of the cationic (cetyl trimethyl ammonium bromide; CTAB) and anionic (sodium lauryl sulfate; NaLS) surfactants has been investigated at three temperatures, namely, 40°C, 50°C, and 60°C. On increasing the surfactant content in the surfactant-dye mixture, the initial rate of adsorption (h _i) and the adsorption capacity at equilibrium (q _e) were found to increase while pseudo-second-order rate constant (k ₂) was found to decrease. The retarding effect of surfactant on k ₂ was in order of CTAB > NaLS. The activation parameters for adsorption process have been evaluated in each case, and the mechanism of adsorption process has been discussed.     

Striking differences between alkyl sulfate and alkyl sulfonate when mixed with cationic surfactants

The properties of alkyl sulfate and alkyl sulfonate are similar except for their Krafft points. However, alkyl sulfate and alkyl sulfonate behave quite differently when they are mixed with cationic surfactants and show some totally unexpected results. In this work sodium alkyl sulfate (C_nH_2n+1SO₄Na,C_nSO₄)–alkyl quaternary ammonium bromide [C_nH_2n+1N(C_mH_2m+1)₃Br, C_nN, m=1–4] mixtures and sodium alkyl sulfonate (C_nH_2n+1SO₃Na, C_nSO₃)–C_nN mixtures were studied. It was found that, in contrast to the single surfactants, C_nSO₃–C_nN mixtures were much more soluble than C_nSO₄–C_nN mixtures. Besides, the two kinds of catanionic surfactant mixtures were quite different in their phase behavior and aggregate properties. The results were interpreted in terms of the interactions between surfactant molecules, which were very different in the two kinds of mixed systems owing to the distinction between alkyl sulfate and alkyl sulfonate in the molecular charge distribution.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

A comparison study between sodium dodecyl sulfate and sodium dodecyl sulfonate with respect to the thermodynamic properties,micellization, and interaction with poly(ethylene glycol) in aqueous solutions

The density, sound velocity, and conductivity measurements were performed on aqueous solutions of sodium dodecyl sulfate (C₁₂H₂₅SO₄Na) or sodium dodecyl sulfonate (C₁₂H₂₅SO₃Na) in the absence and presence of poly(ethylene glycol) (PEG) at different temperatures. Changes in the apparent molar volumes and isentropic compressibilities upon micellization were derived using a pseudophase-transition approach and the infinite dilution apparent molar properties of the monomer and micellar form of C₁₂H₂₅SO₄Na and C₁₂H₂₅SO₃Na were determined. Variations of the critical micelle concentrations (CMCs) of both surfactants in the solutions investigated with temperature were obtained from which thermodynamic parameters of micellization were estimated. It was found that at low temperature the micelle formation process is endothermic and therefore, this process must be entropically driven. However, upon increasing the temperature, the enthalpic factor becomes more significant and, at temperatures higher than 303.15 K the micellization is enthalpy driven. The interactions between C₁₂H₂₅SO₄Na/C₁₂H₂₅SO₃Na and PEG were studied and it was found that sodium alkyl sulfonates were seen to interact more weakly than their sulfate analogues.     

Surface Activity of Novel Polymerizable Anionic Polyoxyethylene 4-Nonyl-2-Prpylene-Phenyl Ether Ammonium Sulfate Succinate Surfactants

Novel polymerizable surface-active monomers were synthesized by successive treatment of polyoxyethylene 4-nonyl-2-prpylene-phenyl ether ammonium sulfate with maleic anhydride in the presence of hydroquinone at temperature of 180°C. The molecular structures of the polymerizable surfactants were confirmed by ¹H and ¹³C NMR spectroscopy. The surface tension isotherms on the air-water solution interface were obtained. The critical micelle concentrations (cmc) as well as the surface tension at the cmc were determined for these substances. The micellization and adsorption of the prepared anionic surfactants have been investigated by surface tension, and cloud point measurements. Surface parameters such as surface excess concentration (Γ _max), the area per molecule at interface (A _min) and the effectiveness of surface tension reduction (π_CMC) were determined from the adsorption isotherms of the prepared surfactants.      

Effect of anionic and cationic micelles on the oxidation of <Emphasis Type="SmallCaps">D</Emphasis>-glucose by cerium(IV) in presence of H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

The influence of surfactants (anionic and cationic) on the reactivity of the redox couple cerium(IV) and D-glucose was examined spectrophotometerically. Various kinetic parameters have been determined in the absence and presence of surfactants. The kinetics were followed by monitoring the disappearance of the absorbance of cerium(IV) at 385 nm. The reaction obeyed first-order kinetics with respect to [D-glucose] in both media. No effect of anionic micelles of sodium dodecyl sulfate (SDS) was observed due to electrostatic repulsion between the negative head group of SDS and reactive species of cerium(IV) (Ce(SO₄) ₃ ²⁻ ). A twofold increase in the oxidation rate was observed in the presence of cationic micelles of cetyltrimethylammonium bromide (CTAB). The observed catalytic role has been analyzed in terms of the Menger–Portnoy model. The effects of various inorganic salts (Na₂SO₄, NaNO₃ and NaCl) were also studied in micellar media.     

Effects of Surfactant and Salt Species in Reverse Micellar Forward Extraction Efficiency of Isoflavones with Enriched Protein from Soy Flour

Suitability of reverse micelles of anionic surfactant sodium bis(2-ethyl hexyl) sulfosuccinate (AOT) and sodium dodecyl sulfate (SDS), cationic surfactant hexadecyl trimethyl ammonium bromide (CTAB) and nonionic surfactant polyoxyethylene p-t-octylphenol (TritonX-100) in organic solvent isooctane for extraction of soy isoflavone-enriching proteins was investigated. The results showed that the order of combined isoflavone contents was SDS>CTAB>Triton X-100>AOT, while the order of protein recovery was SDS>AOT>TritonX-100>CTAB. As compared with ACN-HCl extraction, the total amount of isoflavones was lower than reverse micellar extraction. Ion strength was one of the important conditions to control extraction of isoflavone-enriching proteins with AOT reversed micelles. For the six salt systems, KNO₃, KCl, MgCl₂, CaCl₂, NaCl, and Na₂SO₄, extracted fraction of isoflavone-enriching proteins was measured. Salt solutions greatly influenced the extraction efficiency of isoflavones in an order of KNO₃>MgCl₂>CaCl₂>KCl>NaCl>Na₂SO₄, while protein in an order of MgCl₂>CaCl₂>NaCl>KNO₃>Na₂SO₄>KCl.     

Investigation on the Adsorption and Corrosion Inhibition Behavior of Gum Acacia and Synergistic Surfactants Additives on Mild Steel in 0.1 M H2SO4

Adsorption and corrosion inhibition effect of gum acacia alone and in presence of surfactants sodium dodecyl benzene sulphonate and cetyltrimethyl ammonium bromide on mild steel in 0.1 M H₂SO₄ in temperature range of 30 to 60°C was investigated using weight loss method, chemical analysis of solution, scanning electron microscopy, atomic force microscopy and determination of thermodynamic parameters. Inhibiting action of gum acacia is synergistically enhanced on addition of small amount of surfactants. SEM and AFM results confirmed the existence of an adsorbed protective film on the mild steel surface. Thermodynamic parameters reveal that adsorption process is spontaneous and obey Freundlich adsorption isotherm.     

Binding characteristics of ionic surfactants with human hair

Binding isotherms of two types of ionic surfactants, C_mH_{2m +1}SO₄Na (m = 8,10,12) and C_nH_{2n + 1}N⁺(CH₃)₃C1 (n=10, 12), to human hair in aqueous solutions were examined to clarify effects of hydrophobic and electrostatic interaction of ionic surfactants with hair. The binding isotherms of anionic surfactants showed cooperativity with discontinuously increasing shapes, while the binding isotherms of cationic surfactants showed a Langmuir-type, regardless of the difference of a hair condition.The calculated free energy change (— G@#@) for binding, obtained from Klotz' plots, suggests that the binding processes are governed mainly by a hydrophobic interaction, and bound surfactants probably expose their alkyl chains to the aqueous phase, since no-G was observed with the increase of m or n and values of enthalpy change(H) were positive or zero.     

The Self-Association and Mixed Micellization of an Anionic Surfactant,Sodium Dodecyl Sulfate,and a Cationic Surfactant,Cetyltrimethylammonium Bromide: Conductometric,Dye Solubilization,and Surface Tension Studies

In the present study, we investigate the self-association and mixed micellization of an anionic surfactant, sodium dodecyl sulfate (SDS), and a cationic surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of SDS, CTAB, and mixed (SDS + CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), and A_min (the minimum area per surfactant molecule at the air/water interface)) of SDS, CTAB, and (SDS + CTAB) micellar/mixed micellar systems were evaluated. The thermodynamic parameters of the micellar (SDS and CTAB), and mixed micellar (SDS + CTAB) systems were evaluated.

A schematic representation of micelles and mixed micelles.     

Etude par viscosité et autodiffusion de solutions aqueuses de divers n-alkyl-benzènesulfonates

Resumé Les propriétés physico-chimiques de solutions aqueuses de différents alkyl-p-benzènesulfonates de pureté contrôlée ont été déterminées par diverses méthodes: solubilité, viscosité, autodiffusions. Les micelles formées par len-octyl-p-benzènesulfonate de sodium (C₈ SO₃ Na) et len-dodécyl-p-benzènesul-fornate de sodium (C₁₂ Na) sont globulaires dans tout le domaine de concetration exploité; les micelles (C₈ SO₃ Na + C₁₂ SO₃ Na) sont de taille proche de celles de C₈ SO₃ Na.La détermination du nombre de contre-ions liés aux micelles de C₈ SO₃ Na confirme cette structure.

---

Summary Various methods, i. e. solubility, viscosity and self-diffusion have been employed to determine the physico chemical parameters of aqueous solutions of puren-alkyl-p-benzene-sulfonates. Micelles of sodiumn-octyl-p-benzene sulfonate (C₈ SO₃ Na) are of globular shape; mixed micelles formed by these compounds (C₈ SO₃ Na + C₁₂ SO₃ Na) show a very slight swelling compared with C₈ S03 Na micelles.The degree of counter-ion association of C₈ SO₃ Na micelles is in good accordance with a globular shape of the micelles.

---

Zusammenfassung Löslichkeit, Viskosität und Selbst-Diffusion wurden benutzt, um physikalisch-chemische Parameter von wäßrigen Lösungen reinern-Alkyl-p-benzenesulfonate zu bestimmen. Mizellen von Natriumn-Oktylpbenzenesulfonar (C₈ SO₃ Na) haben eine globulare Form; Mischmizelle von C₈ SO₃ Na und C₁₂ SO₃ Na zeigen eine sehr geringe Quellung im Vergleich mit Mizellen von C₈ SO₃ Na.Der Grad von Gegenionenassoziation zu C₈ SO₃-Mizellen ist in guter Übereinstimmung mit einer globularen Form der Mizellen.

---

---

Avec 6 figures et 7 tableaux

---

The Lund Institute of Technology, Lund (Suède).

---

Groupe de Dynamique des phases condensées, USTL.     

Interaction of Novel Anionic Gemini Surfactants with Dodecyl Sodium Sulfate in Aqueous NaCl Medium and the Performance of Their Mixtures

The interaction in two mixtures of two novel anionic gemini surfactants, sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(hexylamino)-1,3,5-triazine-6,2-diyl)bis(azanediyl)diethanesulfonate (C₆-2-C₆) and sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(octylamino)-1,3,5-triazine-6,2-diyl) bis(azanediyl) diethanesulfonate (C₈-2-C₈), and conventional anionic surfactants, sodium dodecyl sulfate (SDS), have been investigated in 0.1 M NaCl aqueous solutions. The mixed systems are C₆-2-C₆/SDS and C₈-2-C₈/SDS, and the mole factions (α_G) of geminis are 0.1, 0.3, 0.5, 0.7, and 0.9, respectively. Mixtures of both C₆-2-C₆/SDS and C₈-2-C₈/SDS exhibit synergism in surface tension reduction efficiency and mixed micelle formation. But, all mixtures except C₆-2-C₆/SDS (α_G = 0.7), C₆-2-C₆/SDS (α_G = 0.9), and C₈-2-C₈/SDS (α_G = 0.1) don't exhibit synergism in surface tension reduction effectiveness. The performances, such as wetting, emulsification, and dispersion were measured and the results showed all mixtures posses application properties.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Synthesis and Properties of Aromatic Side Chained N‐Acyltaurate Surfactants

A series of anionic N‐acyltaurate surfactants, side chain containing aromatic nucleus (abbreviated as SAATT), were synthesized via Williamson reaction, hydrolyzation, and acylation. Krafft temperatures and surface properties of these surfactants at 30°C, that is, critical micelle concentration, cmc, surface excess concentration, Γ_max, surface area demand per molecule, A _min, efficiency in surface tension reduction, pC₂₀, effectiveness in surface tension reduction, π_cmc, and cmc/C₂₀ parameter were determined. It was shown that these surfactants exhibit good solubility which was confirmed by measuring Krafft temperature. The cmc of SAATT was much smaller than that of conventional surfactants with similar effective carbon numbers, and shifted to lower concentration with increasing hydrocarbon chain length. In addition, the γ_cmc decreased with decrease in Γ_max. The pC₂₀ and the cmc/C₂₀ got larger with the increase in hydrocarbon chain length. From the fluorescence intensity ratios of I ₁ (373 nm) and I ₃ (384 nm) using pyrene as a probe, it was indicated that the molecules of SAATT formed loose micelles with a broad size distribution.     

Conformational phase diagram of poly(l-lysine) in sodium alkanesulfonate aqueous solutions at various temperatures

The conformation of poly(l-lysine) (PLL) was investigated in sodium alkanesulfonate C_nSO₃Na (n=8, 7) at various temperatures by circular dichroism spectrum measurements. C₈SO₃Na induced a double-step conformational change from a coil, to a β-sheet, and then to an α-helix, in which C₇SO₃Na induced a single-step coil-to-helix conformational change. Binding isotherms of C₈SO₃Na by PLL were constructed from the potentiometry of equilibrium concentration of the surfactant using a surfactant ion-selective electrode. The curves indicated the cooperative binding characteristic and were analyzed by a linear lattice model using the Bethe approximation. The thermodynamic parameters obtained from the model revealed that the binding of C₈SO₃Na by PLL was an entropy-driven process. The conformational change was observed at nearly full binding, presumably due to the surfactant clustering of the ordered conformation.     

Micellar effects upon the reaction of hydroxide ion with 2-phenoxyquinoxaline

Cationic micelles of alkyltrimethylammonium chloride and bromide (alkyl = n? C₁₂H₂₅, n? C₁₄H₂₉, and n? C₁₆H₃₃) catalyze and anionic micelles of sodium dodecyl sulfate inhibit the reaction of hydroxide ion with 2-phenoxyquinoxaline (1). Inert anions such as chloride, nitrate, mesylate, and n-butanosulfonate inhibit the reaction in CTABr by competing with OH^? at the micellar surface. The overall micellar effects on rate in cationic micelles and dilute electrolyte can be treated quantitatively in terms of the pseudo-phase ion-exchange model. The determined second-order rate constants in the micellar pseudo-phase are smaller than the second-order constants in water. © 1994 John Wiley & Sons, Inc.