Organometallic Reactions and Syntheses : Volume 6, E. I. Becker and M. Tsutsui,ed., Plenum Publishing Corporation., New York/ London, 1977, xii + 314 pages $47.40

The (Me₃Si)₃C group causes very large steric hindrance to nucleophilic displacement at a silicon atom to which it is attached, and (Me₃Si)₃CSiMe₂Cl is even less reactive than t-Bu₃SiCl towards base. The compounds (Me₃Si)₃CSiMe₂X (X = Cl, Br, or I) are cleaved by MeOH/MeONa to give (Me₃Si)₂CHSiMe₂OMe, possibly via the silaolefin (Me₃Si)₂ CSiMe₂, and the correspondLug (Me₃Si)₃ CSiPh₂X compounds undergo the analogous reaction even more readily. The halides (Me₃Si)₃CSiR₂X (X = Cl or Br) and (Me₃Si)₃CSiCl₃ do not react with boiling alcoholic silver nitrate, but the iodides (Me₃Si)₃CSiR₂I are rapidly attacked.     

Bildung und Reaktionen P-funktioneller Phosphane

Formation and Reaction of P-functional Phosphanes The reaction of (me₃Si)₂PLi · 2 THF a (me = CH₃) with PCl₃ b at ?78°C via the intermediate (me₃Si)₂P? PCl₂ 1 yields [(me₃Si)₂P]₂PCl 2 and [(me₃Si)₂P]₂P? P(Sime₃)₂ 3 . By addition of me₃CLi c to the reaction mixture of a and b (molar ratio a:b:c (molar ratio a:b:c = 1:1:1) at ?60°C, 2 is formed as a main product, which reacts on to yield [(me₃Si)₂P]₂PH 4 (white crystals, mp = 73°C). By reactions of a:b:c in a molar ratio of 1:1:2 the cyclotetraphosphane (me₃C)₃ (me₃Si)P₄ 7 is accessible, and the additional formation of (me₃Si)₂PLi · 2 THF, (me₃Si)₃P and Li₃P₇ · 3 THF 13 was detected. Warming (me₃Si)₂P? PCl(Cme₃) 5 to 20°C produces cis- and trans-cyclotetraphosphanes (me₃Si)₂(me₃C)₂P₄. By running the reaction of a and b at ?78°C and adding me₃CLi only after 24 h, additionally to (me₃Si)₂P? PH Cme₃) and (me₃Si)₃P also (me₃Si)₂P? P(Cme₃)? P(Cme₃)? P (Sime₃)₂ is obtained, which is formed by metallation of (me₃Si)₂P? PCl(Cme₃) with me₃CLi and by further reaction of the intermediate (me₃Si)₂P? PLi(Cme₃) with (me₃Si)₂P? PCl(Cme₃). The reaction of (me₃Si₃)P with PCl₃ at ?78°C only yields (me₃Si)₂P? PCl₂ 1 and me₃SiCl. On addition of me₃CLi (?78°C, molar ratio = 1:1:1) preferrably 2 and (me₃Si)₂P? PCl(Cme₃) are formed, whereas after warming the mixture to 20°C, 4 and (me₃Si)₂P? PH(Cme₃) are found to be the main products. These reactions are induced by the cleavage of 1 by means of me₃CLi, and by the formation of (me₃Si)₂PLi and me₃C? PCl₂.     

Anhydrous Nitrates and Nitrosonium Nitratometallates of Manganese and Cobalt,M(NO3)2, NO[Mn(NO3)3], and (NO)2[Co(NO3)4]: Synthesis and Crystal Structure

Crystalline NO[Mn(NO₃)₃] ( I ) and (NO)₂[Co(NO₃)₄] ( II ) were synthesized by reaction of the corresponding metal and a liquid N₂O₄/ethylacetate mixture. I is orthorhombic, Pca2₁, a = 9.414(2), b = 15.929(3), c = 10.180(2) Å, Z = 4, R₁ = 0.0286. II is monoclinic, C2/c, a = 14.463(3), b = 19.154(4), c = 13.724(3) Å, β = 120.90(3), Z = 12, R₁ = 0.0890. Structure I consists of [Mn(NO₃)₃]^– sheets with NO⁺ cations between them. Two types of Mn atoms have CN_Mn = 7 and 8. Structure II is ionic containing isolated [Co(NO₃)₄]‐anions and NO⁺ cations with CN_Co = 8. Crystals of Mn(NO₃)₂ ( III ) and Co(NO₃)₂ ( IV ) were obtained by concentration of metal nitrate hydrate solutions in 100% HNO₃ in a desiccator with P₂O₅. III is cubic, Pa 3, a = 7.527(2) Å, Z = 4, R₁ = 0.0987. IV is trigonal, R 3, a = 10.500(2), c = 12.837(3) Å, Z = 12, R₁ = 0.0354. The three dimensional structure III is isotypic to the strontium and barium dinitrates. Structure IV contains a three dimensional network of interconnected Co(NO₃)_6/3 units with a distorted octahedral coordination environment of Co atoms. General correlations between central atom coordination and coordination modes of NO₃ groups are discussed.     

Proton‐Assisted Hydrogen Activation on Polyhedral Cations

The treatment of [1,1‐(PR₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] (PR₃=PMe₃ ( 2 ) or PPh₃ and PMe₃ ( 3 ); Py=pyridine) with triflic acid (TfOH) affords [1,3‐μ‐(H)‐1,1‐(PR₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ (PR₃=PMe₃ ( 4 ) or PMe₃ and PPh₃ ( 5 )). These products result from the protonation of the 11‐vertex closo‐cages along the Rh(1)? B(3) edge. These unusual cationic rhodathiaboranes are stable in solution and in the solid state and they have been fully characterized by multinuclear NMR spectroscopy. In addition, compound 5 was characterized by single‐crystal X‐ray diffraction. One remarkable feature in these structures is the presence of three {Rh(PPh₃)(PMe₃)}‐to‐{ηⁿ‐SB₉H₈(Py)} (n=4 or 5) conformers in the unit cell, thus giving an uncommon case of conformational isomerism. [1,1‐(PPh₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] ( 1 ), that is, the bis‐PPh₃‐ligated analogue of compounds 2 and 3 , is also protonated by TfOH, but, in marked contrast, the resulting cation, [1,3‐μ‐(H)‐1,1‐(PPh₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ ( 6 ), is attacked by a triflate anion with the release of a PPh₃ ligand and the formation of [8,8‐(OTf)(PPh₃)‐9‐(Py)‐nido‐8,7‐RhSB₉H₉] ( 9 ). The result is an equilibrium that involves cationic species 6 , neutral OTf‐ligated compound 9 , and [HPPh₃]⁺, which is formed upon protonation of the released PPh₃ ligand. The resulting ionic system reacts readily with H₂ to give cationic species [8,8,8‐(H)(PPh₃)₂‐9‐(Py)‐nido‐8,7‐RhSB₉H₉]⁺ ( 7 ). This reactivity is markedly higher than that previously found for compound 1 and it introduces a new example of proton‐assisted H₂ activation that occurs on a polyhedral boron‐containing compound.     

Synthese und Strukturen neuer Ringverbindungen des Bismuts mit Tris(trimethylsilyl)silyl und ‐stannylresten – [(Me3Si)3Si]4Bi4 und [(Me3Si)3Sn]6Bi8

Synthesis and Structures of Novel Ring Compounds of Bismuth with Tris(trimethylsilyl)silyl and ‐stannyl Substituents – [(Me₃Si)₃Si]₄Bi₄ and [(Me₃Si)₃Sn]₆Bi₈ A bicyclo[3.3.0]octane‐like core consisting of eight bismuth atoms is found in the novel octabismuthane Bi₈[Sn(SiMe₃)₃]₆. It is prepared like Bi₄[Si(SiMe₃)₃]₄ by reduction of BiBr₃ with Li(thf)₃E(SiMe₃)₃ (E = Si, Sn) together with (Me₃Si)₆E₂. Both bismuth ring compounds have been characterized by single crystal X‐ray crystallography.     

Übergangsmetall-Silyl-Komplexe, 44. Darstellung der zweikernigen Silyl-Komplexe (CO)3(R3Si)Fe(μ-PR′R′′)Pt(PPh3)2 durch oxidative Addition von (CO)3(R′R′′HP)Fe(H)SiR3 an (C2H4)Pt(PPh3)2

Transition Metal Silyl Complexes, 44. — Preparation of the Binuclear Silyl Complexes (CO)₃(R₃Si)Fe(μ-PR′R′′)Pt(PPh₃)₂ by Oxidative Addition of (CO)₃(R′R′′HP)Fe(H)SiR₃ to (C₂H₄)Pt(PPh₃)₂ The complexes (CO)₃(R′R′′HP)Fe(H)SiR₃ ( 1 ) [PHR′R′′ = PHPh₂, PH₂Ph, PH₂Cy; SiR₃ = SiPh₃, SiPh₂Me, SiPhMe₂, Si(OMe)₃] react with Pt(C₂H₄)(PPh₃)₂ to give the dinuclear, silyl-substituted complexes (CO)₃(R₃Si)Fe(μ-PR′R′′)Pt(PPh₃)₂ ( 2 ) in high yields. Upon reaction of 2 (R = R′ R′′ = Ph) with CO, the PPh₃ ligand at Pt being trans to the PPh₂ bridge is exchanged, and (CO)₃(Ph₃Si)Fe(μ-PPh₂)Pt(PPh₃)CO ( 3 ) is formed. Complex 3 is characterized by an X-ray structure analysis. The rather short Fe — Si distance [233.9(2) pm] and the infrared spectrum of 3 indicate that the Fe — Pt bond is quite polar.     

Three rare heteromultinuclear 3d-4f salamo-like complexes constructed from auxiliary ligand 4,4′-bipy: Syntheses,structural characterizations,fluorescence and antimicobial properties

Three rare heteromultinuclear complexes, _∞[NiL(4,4′-bipy)Pr (NO₃)₃]·(CH₃)₂CHOH ( 1 ), [{CuLSm (NO₃)₃}₂(4,4′-bipy)]·CH₃OH ( 2 ) and [{CuL (CH₃CH₂OH)Eu (NO₃)₃] ( 3 ) with a symmetrical salamo-like hexadentate ligand H₂L have been synthesized, and characterized by FT-IR, UV–vis and X-ray crystallography. Complex 1 is a 1D coordination polymer constructed from heterobimetallic [Ni(L)Pr (NO₃)₃] units which are connected by the exo-dentate ligand 4,4′-bipy bearing nitrogen-donor atoms. Complex 2 is a heterotetranuclear dimer based on [Cu(L)Sm (NO₃)₃] moieties which are linked through the exo-dentate 4,4′-bipy hasing nitrogen-donor atoms. Complex 3 is a heterodinuclear structure, Cu (II) atom is five-coordinate possessing a distorted square pyramidal geometry, and Eu (III) atom is a deca-coordinate adopting a distorted bicapped square antiprism. In addition, fluorescence and antimicobial properties of the ligand H₂L and its complexes 1 – 3 have also been discussed.     

Synthese und Koordinationsverhalten von (Ph3SnO)3As. Die Kristallstrukturen von (Ph3SnO)3As und [{(Ph3SnO)3As}Fe(CO)4]

Synthesis and Coordination Behaviour of (Ph₃SnO)₃As. The Crystal Structures of (Ph₃SnO)₃As and [{(Ph₃SnO)₃As}Fe(CO)₄] (Ph₃SnO)₃As ( 1 ) was obtained from the reaction of Ph₃SnOH with As₂O₃ in a dichloromethane/water mixture as solvent. Upon recrystallization from DMF 1 forms orthorhombic crystals, space group P2₁2₁2₁, with a = 977.3(2), b = 1903.5(3) and c = 2600.9(5) pm (at 220 K). In 1 the As atom is bound to three OSnPh₃ groups with As–O distances of 171.9(3)–174.9(3) pm. Reaction of 1 with Fe₂(CO)₉ gives [{(Ph₃SnO)₃As}Fe(CO)₄] ( 2 ). 2 crystallizes monoclinic, space group P2₁/n with a = 2242.3(5), b = 1112.6(2), c = 2353.0(5) pm and β = 111,46(2)° (at 220 K). In 2 the iron atom exhibits a trigonal bipyramidal coordination with the (Ph₃SnO)₃As ligand in an axial position. The Fe–As bond length is 230.5(1) pm.     

Darstellung und Eigenschaften von Chromtricarbonyl-Komplexen strukturisomerer Borazin-Derivate

The new hexaalkylborazine chromium tricarbonyls (n-Pr)₃B₃N₃Me₃Cr(CO)₃ (V), Me₃B₃N₃(n-Pr)₃Cr(CO)₃ (VI), (i-Pr)₃B₃N₃Me₃Cr(CO)₃ (VII) and Me₃B₃N₃(i-Pr)₃Cr(CO)₃ (VIII) have been prepared from fac-Cr(CO)₃(MeCN)₃ and the corresponding borazine in dioxane or without solvent. They are much more labile than the isomeric complex Et₃B₃N₃Et₃Cr(CO)₃ (IV) which can be readily obtained from Et₃B₃N₃Me₃Cr(CO)₃ and Et₃B₃N₃Et₃ by ring ligand exchange. The NMR., IR., UV. and Mass spectroscopic data of the complexes IV–VIII will be briefly discussed. The preparation of the borazine derivatives (n-Pr)₃B₃N₃Me₃ (IX) and Me₃B₃N₃(n-Pr)₃ (X) is also reported.     

Synthese und Eigenschaften teilsilylierter Tri- und Tetraphosphane. Reaktionen lithiierter Diphosphane mit Chlorphosphanen

Synthesis and Properties of Partially Silylated Tri- and Tetraphosphanes. Reaction of Lithiated Diphosphanes with Chlorophosphanes The reactions of Li(Me₃Si)P? P(SiMe₃)(CMe₃) 1 , Li(Me₃Si)P? P(CMe₃)₂ 2 , and Li(Me₃C)P? P(SiMe₃)(CMe₃) 3 with the chlorophosphanes P(SiMe₃)(CMe₃)Cl, P(CMe₃)₂Cl, or P(CMe₃)Cl₂ generate the triphosphanes [(Me₃C)(Me₃Si)P]₂P(SiMe₃) 4 , (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)₂ 6 , [(Me₃C)₂P]₂P(SiMe₃) 7 , and (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)Cl 8 . The triphosphane (Me₃C)₂P? P(SiMe₃)? P(SiMe₃)₂ 5 is not obtainable as easily. The access to 5 starts by reacting PCl₃ with P(SiMe₃)(CMe₃)₂, forming (Me₃C)₂ P? PCl₂, which then with LiP(SiMe₃)₂ gives (Me₃C)₂ P? P(Cl)? P(SiMe₃)₂ 11 . Treating 11 with LiCMe₃ generates (Me₃C)₂P? P(H)? P(SiMe₃)₂ 16 , which can be lithiated by LiBu to give (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 13 and after reacting with Me₃SiCl, finally yields 5 . 8 is stable at ?70°C and undergoes cyclization to P₃(SiMe₃)(CMe₃)₂ in the course of warming to ambient temperature, while Me₃SiCl is split off. 7 , reacting with MeOH, forms [(Me₃C)₂P]₂PH. (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 18 , which can be obtained by the reaction of 5 with LiBu, decomposes forming (Me₃C)₂P? P(Li)(SiMe₃), P(SiMe₃)₃, and LiP(SiMe₃)₂, in contrast to either (Me₃C)₂P? P(Li)? P(SiMe₃)(CMe₃) 19 or [(Me₃C)₂P]₂PLi, which are stable in ether solutions. The Li phosphides 1 , 2 , and 3 with BrH₂C? CH₂Br form the n-tetraphosphanes (Me₃C)(Me₃Si)P? [P(SiMe₃)]₂? P(SiMe₃)(CMe₃) 23 , (Me₃C)₂P? [P(SiMe₃)]₂? P(CMe₃)₂ 24 , and (Me₃C)(Me₃Si)P? [P(CMe₃)]₂? P(SiMe₃)(CMe₃) 25 , respectively. Li(Me₃Si)P? P(SiMe₃)₂, likewise, generates (Me₃Si)₂P? [P(SiMe₃)]₂? P(SiMe₃)₂ 26 . Just as the n-triphosphanes 4 , 5 , 6 , and 7 , the n-tetraphosphanes 23 , 24 , and 25 can be isolated as crystalline compounds. 23 , treated with LiBu, does nor form any stable n-tetraphosphides, whereas 24 yields (Me₃C)₂P? P(Li)? P(SiMe₃)? P(CMe₃)₂, that is stable in ethers. With MeOH, 24 , forms crystals of (Me₃C)₂P? P(H)? P(SiMe₃)? P(CMe₃)₂.     

Zur Oxydation von Nickel(0)-Komplexen mit Halogenverbindungen des Kobalt(II), Kupfer(II) und Zink(II)

Oxidation of Nickel(0) Complexes by Halogen Compounds of Cobalt(II), Copper(II), and Zine(II) In aceton as a solvent Ni(PPh₃)₄ is oxidized by; cobalt(II) complexes of the type (Ph₃P)₂CoX₂ to nickel(I) compounds. In the case of X = Cl (Ph₃P)₃NiCl and (Ph₃P)₃CoCl separately crystallize, while for X = Br the lattice compound CoNi(PPh₃)₆Br₂ and for X = I CoNi(PPh₃)₅I₂ are formed. CuBr₂ and Ni(PPh₃)₄ react to (Ph₃P)₂NiBr and (Ph₃P)_nCuBr. With (Ph₃P)₂ZnCl₂ also (Ph₃P)₃NiCl is formed But in this case the oxidant is hydrogen chloride originating from hydrolysis. The magnetic moments of the new compounds were measured and their vis and fir spectra compared with those of the simple compounds (Ph₃P)_nNiX (n = 2, 3) and (Ph₃P)₃CoX. The M–X stretching frequencies are assigned. The cobalt (I) complexes (Ph₃P)₃CoCl have identical (distorted tetrahedral) structures, but most probably the nickel (I) complexes have not.     

Synthese,Struktur und Photolyse von Isocyanatokomplexen des Rheniums

Synthesis, Structure, and Photolysis of Isocyanato Complexes of Rhenium The Re^III isocyanato complex Re(NCO)₃(PMe₂Ph)₃ yields from the reaction of ReCl₃(PMe₂Ph)₃ with an excess of NaOCN in EtOH. It crystallizes in the triclinic space group P 1 with a = 991.8(6), b = 1180.7(6), c = 1348.8(5) pm, α = 89.85(1)°, β = 94.12(1), γ = 111.56(1)°, Z = 2. In the mononuclear complex with an octahedral coordination of the Re atoms the phosphine and isocyanato ligands exhibit a meridional arrangement. By using a deficient amount of NaOCN the mono isocyanato complex Re(NCO)Cl₂(PMe₂Ph)₃ is formed, and part of the educt is transformed to its isomer [(Me₂PhP)₃Re(μ-Cl)₃Re(PMe₂Ph)₃]Cl₃. The mono isocyanato complex forms monoclinic crystals with the space group P2₁/n and a = 1467.5(7), b = 1310.6(7), c = 1603.2(8) pm, β = 112.08(1)°, Z = 4. The isocyanato ligand is in trans position to a Cl atom, and the phosphine ligands are coordinated in a meridional arrangement. [(Me₂PhP)₃Re(μ-Cl)₃Re(PMe₂Ph)₃]Cl₃ · 2 EtOH crystallizes in the hexagonal space group P6₃/m with a = 1332.6(2), c = 2300.1(7) pm, Z = 2. The dinuclear complex cation occupies with its center a special position with the symmetry C_3h. Photolysis of Re(NCO)Cl₂(PMe₂Ph)₃ results in the cleavage of the isocyanato ligand with release of CO and formation of the nitrido complex ReNCl₂(PMe₂Ph)₃. The reaction of ReNCl₂(PMe₂Ph)₃ with NaOCN affords the complex ReN(NCO)₂(PMe₂Ph)₃. It crystallizes in the space group P2₁/n with a = 943.0(3), b = 2635.2(4), c = 1212.6(5) pm, β = 109.88(1)°, Z = 4. In this nitrido complex, like in the educt, the phosphine ligands form a meridional arrangement. The nitrido ligand is in trans position to an isocyanato group. The distance Re≡N is 165.9(6) pm.     

Introducing a New Naphthoxime‐based Ligand into the ­Chemistry of Triangular [Mn3] Complexes

A new type of naphthoxime‐based ligand, 1‐(1‐hydroxynaphthalen‐2‐yl)ethanone oxime (naphthsaoH₂, 1a ), is introduced into the chemistry of manganese(III) complexes. First triangular [Mn₃] compound with this ligand is presented: [Mn₃O(naphthsao)₃(CH₃OH)₅(CH₂ClCOO)] ( 1 ). Also preliminary structural studies for [Mn₃O(naphthsao)₃(CH₃OH)₅(CH₃COO)] ( A ) and 0.52[Mn₃O(naphthsao)₃(CH₃OH)₅(H₂O)] · 0.48[Mn₃O(naphthsao)₃(CH₃OH)₆] ( B ) are mentioned. Compound 1 was characterized by X‐ray diffraction studies and by a preliminary investigation of the magnetic properties, showing antiferromagnetic coupling of the Mn^III ions. Compound 1 displays a supramolecular motif of hydrogen‐bonded chains.     

Tricarbonyl Complexes of Rhenium(I) with Acetylpyridine Benzoylhydrazone and Related Ligands

Novel rhenium(I) tricarbonyl complexes have been prepared by reactions of (Et₄N)₂[Re(CO)₃Br₃] with acetylpyridine benzoylhydrazone, Hapbhyd, di(2‐pyridyl)ketone benzoylhydrazone, Hpy₂bhyd, bis(2‐pyridine)ketone, py₂CO, and pyridinealdehyde terephtalaldehydebishydrazone, pytehyd. The ligands remain protonated when no supporting base is added and the following complexes have been isolated: [Re(CO)₃Br(Hapbhyd)], [Re(CO)₃Br(Hpy₂bhyd‐py, hyd)], [Re(CO)₃Br(Hpy₂bhyd‐py¹, py²)], [Re(CO)₃Br(py₂CO‐N, N)] and [Re(CO)₃Br(pytehyd)]. Addition of triethyl amine results in deprotonation of Hapbhyd and the formation of [Re(CO)₃(OH₂)(apbhyd)], whereas Hpy₂bhyd is hydrolysed and a rhenium complex with the monoanionic bis(2‐pyridyl)hydroxymethanolato ligand, {py₂C(OH)O}^‐, is formed. The same compound, [Re(CO)₃{py₂C(OH)O}], is obtained when triethyl amine and water are added to a mixture of (Et₄N)₂[Re(CO)₃Br₃] and py₂CO. The air‐stable products have been studied by spectroscopic methods and X‐ray crystallography.     

Novel Copolymers of 4-Fluorostyrene. 8. Some Ring-Trisubstituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₂CH=C(CN)₂ (where R is 2,4-(CH₃O)₂-3-CH₃, 2,3,4-(CH₃O)₃, 2,4,5-(CH₃O)₃, 2,4,6-(CH₃O)₃, 3,4,5-(CH₃O)₃, 6-Br-3,4-(CH₃O)₂), 2,3,5-Cl₃, 2,3,6-Cl₃ and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3,4,5-(CH₃O)₃(10.6) > 2,4,6-(CH₃O)₃(9.3) > 2,4,5-(CH₃O)₃ (5.4) > 2,3,4-(CH₃O)₃ (4.4) > 6-Br-3,4-(CH₃O)₂ (3.2) > 2,3,5-Cl₃ (1.5) > 2,3,6-Cl₃ (1.0) > 2,4-(CH₃O)₂-3-CH₃ (0.7). High T _g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–400°C range with residue, which then decomposed in the 400–800°C range.     

F3SiSH and (F3Si)2S: Conflicting Observations Resolved by Unambiguous Syntheses

The reaction between liquid F₃SiI and red HgS mainly yields the disilylsulfane (F₃Si)₂S and, in smaller amounts, hitherto unknown (F₃SiS)₂SiF₂. These fluorosilylsulfanes have different thermal stabilities. (F₃Si)₂S is a versatile precursor for F₃Si derivatives, and at ambient temperature it is stable, while (F₃SiS)₂SiF₂ decomposes rapidly. F₃SiSH has been obtained, along with F₃SiBr, by selective cleavage of one of the Si–S bonds in (F₃Si)₂S with HBr in the liquid phase and was for the first time unambiguously characterized. Contrary to previous reports, (F₃Si)₂O rather than (F₂SiS)₂ is formed when SiF₄ is passed over SiS₂ at 1298 K in a quartz tube. Raman and infrared spectra of (F₃Si)₂S, F₃SiSH and its deuterated derivative F₃SiSD have been measured and assigned to vibrational fundamentals. Multinuclear NMR spectra have been recorded.     

Übergangsmetall-substituierte phosphane,arsane und stibane : XXIX. Metallierte arsane und stibane mit chiralem eisen-substituenten

The reaction of Cp(CO)₂FeEMe₂ (E  As, Sb, Bi) with Me₃P, Et₃P, Me₂PhP and (MeO)₃P leads to a CO/R₃P exchange and formation of the chiral derivatives Cp(CO)(R₃P)FeEMe₂. Cp(CO)[(MeO)₃P]FeEMe₂ rearranges already at room temperature to Cp(CO)[(Me₃E]FeP(O)(OMe)₂ which is transformed by (MeO)₃P to Cp(CO)[(MeO)₃P]FeP(O)(OMe)₂. The high nucleophilicity of the new organometallic Lewis bases is established by the easy conversion of Cp(CO)(Me₃P)FeSbMe₂ to [Cp(CO)(Me₃P)Fe(SbMe₃)]I with MeI, or to [Cp(CO)(Me₃P)FeSbMe₂Fe(CO)LCp]Hal (L  CO, Hal  Cl; L  Me₃P, Hal  Br) with Cp(CO)LFe-Hal, respectively. The new compounds are characterized by spectroscopy and elementary analyses.     

Neue metallorganisch substituierte Indium–Stickstoff-Verbindungen. Synthese und Kristallstrukturen von [{Cp(CO)3Mo}2InN(SiMe3)2] und [{Cp(CO)3Mo}In{N(SiMe3)2}2]

New Organometallic Indium Nitrogen Compounds. Synthesis and Crystal Structures of [{Cp(CO)₃Mo}₂InN(SiMe₃)₂] and [{Cp(CO)₃Mo}In{N(SiMe₃)₂}₂] The reaction of [{Cp(CO)₃Mo}₂InCl] with LiN · (SiMe₃)₂ leads to the formation of [{Cp(CO)₃Mo}₂InN · (SiMe₃)₂] ( 1 ). 1 is monomeric and it contains an indium atom which is coordinated in a trigonal planar manner by two {Cp(CO)₃Mo} fragments and a N(SiMe₃)₂ group. The corresponding bis-amide [{Cp(CO)₃Mo}In{N(SiMe₃)₂}₂] ( 2 ) is prepared by the reaction of [{Cp(CO)₃Mo}InCl₂] with two equivalents of LiN(SiMe₃)₂. In analogy to 1, 2 is monomeric and it contains an indium atom in a trigonal planar coordination.     

Metal-thiophen derivatives. Organometallic compounds of palladium and platinum

Thienylmercury(II)chloride reacts with [Pd(PPh₃)₂Cl₂], [Pd(PPh₃)₄] and [Pt(PPh₃)₄] to afford new compounds containing a metal-2-thienyl linkage. The compound [Pd(PPh₃)₂(2-C₄H₃S)Cl] probably has trans stereochemistry.2-Bromothiophen undergoes oxidative addition with [Pd(PPh₃)₄] and [Pt(PPh₃)₄], probably via a radical mechanism. With [Pd(CO)(PPh₃)₃], a carbonyl inserted product is obtained. The bromo-metal(II) complexes have trans stereochemistry. The course of the reaction between 3-methyl-2-bromothiophen and Pd(PPh₃)₄ is more complex. Thus, there is evidence of some cis bromopalladium(II) compounds amongst the products, also there is good evidence to support the view that some isomerisation of 3-methyl-2-thienyl to 4-methyl-2-thienyl occurs during the reaction, thus giving greater molar quantities of [Pd(PPh₃)₂(4-CH₃-2-C₄H₂S)Br] than can be accounted for from any initial 4-methyl-2-bromothiophen impurity.The metallation of the thiophen ring, probably in the 4-position, with palladium(II) is described for 3-theylidene-4-methylaniline.     

Tripodal Thiols as Ligands for Molecular Magnets: Very Strong Antiferromagnetic Exchange Interactions in Vanadium(III) Clusters

The synthesis, structural and magnetic characterisation of [V^III₃O(tmme)₂(diimine)₂Cl] [diimine=2,2′‐bipyridine ( 1 ) or 1,10‐phenanthroline ( 2 )] and (HNEt₃)₂[V^III₄O(tmme)₄] ( 3 ) is reported, in which H₃tmme is tris(mercaptomethyl)ethane, MeC(CH₂SH)₃, the thiol analogue of the famous tripodal alcohol ligands typified by H₃thme [tris(hydroxymethyl)ethane, MeC(CH₂OH)₃]. Complexes 1 and 3 have “T‐shaped” and square topologies, respectively, and the latter is centred on a rare example of a square‐planar oxide. The tri‐thiolate ligands bind the periphery of the clusters and provide such strong antiferromagnetic exchange pathways that in both cases only a single total spin state is occupied up to room temperature, in the absence of metal–metal bonding. Magnetic data, electronic structure calculations and electrochemical data are reported.