Kinetic Studies on the Reaction of Sodium Hexa-cyanoferrate(II) Complex with Peroxydisulfate Anion

Introduction In the previous studies on the oxidation reaction,peroxydisulfate was widely used as an oxidizingagent.1-5 One of the advantages of this oxidant lies in itsstability in a wide range of pH values. The reaction be-tween Fe(CN)5L3- (L=N-aromatic heterocyclic li-gands) and S2O8 2- has been proved to proceed throughan outer-sphere electron transfer mechanism.5 For a re-action [(Eq. (1)] to be under an outer-sphere mechanismthe steps involved are the formation of a reactant …     

Interaction of Metal–Dipeptide Complex with Ninhydrin in the Absence and Presence of Conventional CTAB Surfactant

The present work is aimed at studying the interaction between copper-glycyltyrosine [(Cu(II)-Gly-Tyr)]⁺ and ninhydrin in water and in micelles formed by cetyltrimethylammonium bromide (CTAB) using spectrophometric measurements at 80°C and pH 5.0. The order of reaction remains the same in the two systems, that is, first- and fractional-order kinetics with respect to [Cu(II)-Gly-Tyr]⁺ and [ninhydrin], respectively, in the excess of ninhydrin over [Cu(II)-Gly-Tyr]⁺. It was observed that the product formed is same in both the media. The reaction is catalyzed by CTAB, and the maximum rate enhancement is about three fold. Quantitative kinetic analysis of k_ψ–[CTAB] data was explained in terms of pseudo-phase of the micelles (assuming the association/incorporation of both the reactants at the micellar surface).     

Kinetic Studies on Interaction of Platinum(II) Complexes with an ‘S’ Containing Ligand in Aqueous Medium

The kinetics of the substitution reactions of [Pt(dach)(H₂O)₂]²⁺ and [Pt(en)(H₂O)₂]²⁺ (where ‘dach’ and ‘en’ are cis-1,2-diaminocyclohexane and ethylenediamine, respectively) with excess N,N′-diethylthiourea have been studied in aqueous solution by UV–Vis spectrophotometry. The effect of different N–N spectator ligands on the reactivity of platinum(II) complexes was investigated by studying the water lability of the reactant complexes. The kinetic study has been substantiated by product isolation, IR, NMR and ESI-MS spectral analysis and DFT calculations. The reactions follow normal square-planar substitution mainly in an associative way. Rate parameters have been evaluated under different conditions. The substitution rates of the complexes studied can be tuned through the nature of the N–N chelates, which is important in the development of new active compounds for cancer therapy.     

Properties and Extraction for [Ni(NH3)6]2+ of ATPS-a Formed by Aqueous Cationic–Anionic Surfactant Mixtures

The properties and extraction for [Ni(NH₃)₆]²⁺ of anionic aqueous two-phase systems (ATPS-a) that formed in mixtures of cetyltrimethylammonium bromide (CTAB) and excess sodium dodecyl sulfate (SDS) aqueous solutions were investigated. The results showed that the properties and extraction effects were strongly affected by the surfactant concentration, the temperature of system, and the mole fraction of surfactants. The increase of temperature induces narrower phase region and larger phase volume ratio. In addition, [Ni(NH₃)₆]²⁺ was extracted into the surfactant-rich phase with higher distribution coefficient when the liquid crystal had the birefringent properties. Moreover, the distribution coefficient can be improved through reducing the concentration of surfactant from 0.15 to 0.05 mol · L^?1 or increasing mole fraction of CTAB from 21.9% to 23.1%. The results showed that ATPS of cationic–anionic surfactants was efficient for [Ni(NH₃)₆]²⁺ extraction with distribution coefficients of 13.5 when the total surfactant concentration was 0.05 mol · L^?1, mole fraction of CTAB was 21%, and temperature was 34°C.     

Studies on Thermodynamics of Micellization and Solvophobic Interactions of Novel Surfactant–Cr(III) Complexes in Non-aqueous Solvents

The critical micelle concentration (CMC) of surfactant–Cr(III)–dodecylamine complexes of the type cis-α-[Cr(trien)(C₁₂H₂₅NH₂)X]²⁺ (where trien = triethylenetetramine; X = F⁻, Cl⁻, Br⁻) has been studied in n-alcohol and in formamide at different temperatures, by electrical conductivity measurements. From the CMC values as a function of temperature, various thermodynamic properties have been evaluated: standard Gibbs energy changes (Δ_mic G ⁰), standard enthalpy changes (Δ_mic H ⁰) and standard entropy changes (Δ_mic S ⁰) for micellization. Critical micelle concentrations have also been measured as a function of the percentage composition of alcohol added. The solvent composition dependences of these thermodynamic parameters were determined. It is suggested that alcohol addition leads to an increase in formamide penetration into the micellar interface that depends on the alcohol’s chain length. The results are discussed in terms of an increased hydrophobic effect, dielectric constant of the medium, the chain length of the alcohols, and the surfactant in the solvent mixture.     

Infrared Spectroscopic and Gravimetric Studies on the Dicyclopentylaminemetal(II) Tetracyanonickellate(II) Host–Aromatic Guest Systems

The host complexes M(Cyclopentylamine)₂Ni(CN)₄ (M=Co or Cd) havebeen prepared in powder form. The spectral data suggest that the structures of thesecompounds are similar to those of the Hofmann-dma-type hosts. The absorptionand the liberation processes of the aromatic guests (benzene, toluene, 1,2-, 1,3-,1,4-dichlorobenzene, 1,4-dibromobenzene o-, m-, p-xylene, naphthalene)in these hosts have been examined at room temperature by gravimetric and spectroscopicmeasurements. The desorption of the benzene guest against time has been measured. Thehost structures do not change on inclusion and liberation of the guests. The host compoundshave been suggested as sorbents for isomeric separations.     

Effect of alkyl group on the structure of heterodinuclear Zn(II)–Cu(II) and Zn(II)–Ni(II) complexes derived from unsymmetrical phenol-based dicompartmental macro-acyclic ligands

A series of mono- and heterodinuclear macro-acyclic complexes of [ZnLCu(II)]²⁺ and [ZnLNi(II)]²⁺ were synthesized by a stepwise procedure. The phenol-based macro-acyclic dicompartmental ligands (L^2?) possess contagious hexadentate (N₄O₂) and tetradentate (N₂O₂) coordination sites, where in the mononuclear complexes [ZnL(H⁺)₂]²⁺ the latter site containing two alkyl-imine donor groups (ethyl or isopropyl) is attached to the azomethine moieties. The alkyl group(s) is eliminated upon introduction of the second metal (II) ion into N₂O₂ coordination site as a result of steric crowding of the alkyl groups along with the lack of flexibility associated with the imine groups. When the second metal ion is Cu(II) and R = isopropyl, the both of them are eliminated but when R = Et only one ethyl group is removed. However, in case of Ni(II) as the second metal ion, the both alkyl groups are eliminated regardless of the nature of the alkyl group. The origins of the structural variations are discussed. The prepared complexes were characterized by elemental analysis, molar conductance measurements, X-ray crystallography, IR, NMR and UV–Vis spectroscopies.     

Reactivity of Inorganic α-Nucleophiles in Acyl Group Transfer Processes in Water and Surfactant Micelles: II.1 Alkaline Hydrolysis of Ethyl 4-Nitrophenyl Ethylphosphonate in Systems Based on Dimeric Cationic Surfactants

Russian Journal of Organic Chemistry - Alkaline hydrolysis of ethyl 4-nitrophenyl ethylphosphonate in organized nanosized systems based on dimeric surfactants and co-micelles [with...     

Highly Selective and Stable Zn (II)-Based Metal–Organic Frameworks for the Detections of Tetracycline Antibiotic and Acetone in Aqueous System

Tetracycline (TC) is one of the most widely used antibiotics in aquaculture, and its good water solubility makes it a major contaminant in seawater. Therefore, it is very necessary and challenging to develop an efficient detection method. In this work, two novel metal–organic frameworks [Zn (bpydb)(bimmb)_0.5]_n ( 1 ), {[Zn₂(bpydb)₂(bimb)]·[Zn (bpydb)(bimb)]·H₂O}_n ( 2 ), (bimb = 1,4-bis (lmidazol) butane, H₂bypdb = 4,4′-(4,4’-Bipyridine-2,6-diyl)dibenzoic acid, bimmb = 1,4-bis (imidazol-1-ylmethyl)benzene) were successfully synthesized under solvothermal conditions. Zn-MOF 1 – 2 were characterized by X-ray powder diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). As expected, 1 – 2 have excellent fluorescence properties, thermal stability and good structural stability in water. TC in water can be detected by fluorescence quenching with high selectivity. At the same time, the fluorescence quenching efficiency remains unchanged in the presence of other interfering antibiotics and in aqueous solutions of different pH values (pH = 3–10). The detection ability of 1 in real seawater has not changed substantially, showing considerable practical application prospects. Interestingly, 1 – 2 also efficiently detected traces of acetone in solution with detection limits of 0.07 μM (4.38 ppb) and 0.18 μM (10.85 ppb), respectively. In addition, the mechanism of fluorescence quenching is further discussed.     

Experimental and Computational Mechanistic Studies of the β-Diketiminatoiron(II)-Catalysed Hydroamination of Primary Aminoalkenes

A comprehensive mechanistic study by means of complementary experimental and computational approaches of the exo-cyclohydroamination of primary aminoalkenes mediated by the recently reported β-diketiminatoiron(II) complex B is presented. Kinetic analysis of the cyclisation of 2,2-diphenylpent-4-en-1-amine ( 1 a ) catalysed by B revealed a first-order dependence of the rate on both aminoalkene and catalyst concentrations and a primary kinetic isotope effect (KIE) (k_H/k_D) of 2.7 (90 °C). Eyring analysis afforded ΔH^≠=22.2 kcal mol⁻¹, ΔS^≠=−13.4 cal mol⁻¹ K⁻¹. Plausible mechanistic pathways for competitive avenues of direct intramolecular hydroamination and oxidative amination have been scrutinised computationally. A kinetically challenging proton-assisted concerted N−C/C−H bond-forming non-insertive pathway is seen not to be accessible in the presence of a distinctly faster σ-insertive pathway. This operative pathway involves 1) rapid and reversible syn-migratory 1,2-insertion of the alkene into the Fe−N_amido σ bond at the monomer {N^N}Fe^II amido compound; 2) turnover-limiting Fe−C σ bond aminolysis at the thus generated transient {N^N}Fe^II alkyl intermediate and 3) regeneration of the catalytically competent {N^N}Fe^II amido complex, which favours its dimer, likely representing the catalyst resting state, through rapid cycloamine displacement by substrate. The collectively derived mechanistic picture is consonant with all empirical data obtained from stoichiometric, catalytic and kinetics experiments.     

Direct Electron Transfer Reactivity of Hemoglobin in Cationic Gemini Surfactant–Poly (Allylamine) Hydrochloride Composite Film on Glassy Carbon Electrode

A new composite film comprising cationic gemini surfactant butane-α,ω-bis(dimethyl dodeculammonium bromide) (BDDA, C₁₂-C₄-C₁₂) and poly (allylamine) hydrochloride(PAH) have been prepared. The composite film showed good biocompatibility and could promote the direct electron transfer between hemoglobin (Hb) and glassy carbon (GC) electrode. The immobilized Hb exhibited a pair of well-defined, quasi-reversible, and stable redox peaks with a formal potential of ?0.158 V (vs. SCE) in 0.10 M pH 7 phosphate buffer solutions, and showed high affinity to hydrogen peroxide. The cathodic peak current of the electrode was linear with increasing concentration of H₂O₂ in the range of 5.14 to 200 μM.     

Micellar and Mixed-Micellar Effects on Alkaline Hydrolysis of tris(1,10–phenanthroline)iron(II): Kinetic Exploration

The kinetics of alkaline hydrolysis of tris(1,10–phenanthroline)iron(II) has been studied in the presence of nonionic and mixed nonionic–ionic micellar media at 308 K. The effects of mixed-micellar environments of nonionic with ionic surfactants (C₁₂E₂₃/ATABs and C₁₂E₂₃/SDS) on the hydrolytic rate have been studied. The rate decreases monotonically with an increment of [C₁₂E₂₃]_T (total Brij 35 concentration) at constant [^?OH]₀ and has been discussed with the pseudo-phase micellar model. The rate also decreases with [C₁₂E₂₃]_T at a continuous addition of ionic surfactants (ATABs and SDS). The observed rate constant k_obs follows the empirical relation: k_obs = (k₀ + θK [C₁₂E₂₃]_T)/(1 + K [C₁₂E₂₃]_T) (where θ and K are empirical constants). The values of θ remain unaffected, whereas K decreases nonlinearly with [ATABs]_T in a mixed C₁₂E₂₃?ATAB micellar system. But the k_obs in a mixed C₁₂E₂₃–SDS micellar system is much lower than that of the C₁₂E₂₃–ATAB system and do not comply with any micellar kinetic models.     

UV–Spectral Study on the Effects of Inert Salts on the Nonionic Micellar Solubilization of Phenyl Salicylate in the Absence and Presence of a Cationic Surfactant Under Alkaline Aqueous Medium

The values of the fraction of ionizes phenyl salicylate, f_PS-, obtained from initial absorbance measurement of phenyl salicylate at 350 nm, remain unchanged with the increase in [CH₃CO₂Na] from 0.0 to 0.7 M at 0.01 M NaOH (f_PS- ≈ 0.70) and 0.02 M NaOH (f_PS- ≈ 0.93). The values of f_PS- decrease from ～ 1.0 to 0.90 and ～ 1.0 to 0.84 with the increase in respective [CH₃CO₂Na] and [NaBr] from 0.0 to 0.6 M at 0.01 M NaOH, 0.02 M C₁₂E₂₃(=C₁₂H₂₅(OCH₂CH₂)₂₃OH) and 0.01 M CTABr (=C₁₆H₃₃NMe₃Br).     

Thermodynamics of Protonated Amine–Hexacyanoferrate(II) Complex Formation in Aqueous Solution

Thermodynamic parameters, G°, H° and TS° are reported for the formation of proton amine–hexacyanoferrate(II) complexes, in aqueous solution, at 25°C. H° were determined by the temperature dependence of formation constants and/ or by direct calorimetry in aqueous solution, at T = 25°C. Enthalpy changes for the reaction H_iAⁱ⁺ + H_j Fe(CN) ₆ ^j-4 = AFe (CN)₆H _i+j ^i+j-4 (where A = methylamine, ethylenediamine, and tetraethylenepentamine) are quite low and the main contribution to the stability of these complexes arises from the entropic term, as expected for electrostatic interactions. When j = 0, the formation entropy is linearly dependent on i according to the simple equation TS° = 13.4 i kJ-mol^–1.     

Studies on the CMC and Thermodynamic Functions of a Cationic Surfactant in DMF/Long-Chain Alcohol Systems Using a Microcalorimetric Method

The power-time curves of the micelle formation process were determined at four temperatures for a cationic surfactant [cetyltrimethylammonium bromide (CTAB)] in a non-aqueous solvent [N,N-dimethylformamide (DMF)] by titration microcalorimetry. From the data of the minimum of the titration point and the area of the power-time curves, values of their CMC and ΔH _m ^θ were obtained. Values of ΔG _m ^θ and ΔS _m ^θ were also calculated according to standard thermodynamic relations. For the cationic surfactant CTAB, the relationships involving the carbon numbers of the alcohols, the alcohol’s concentration, and the temperature on the CMC, and also the thermodynamic functions for micellization are discussed. For systems containing an identical concentration of various alcohols, values of the CMC, ΔH _m ^θ and ΔS _m ^θ increased whereas those of ΔG _m ^θ decreased with increasing temperature. For systems containing identical alcohol concentrations at the same constant temperature, values of the CMC, ΔH _m ^θ ,ΔG _m ^θ and ΔS _m ^θ decreased with increasing carbon number of the alcohol. For systems containing the same alcohol at the same temperature, the CMC and ΔG _m ^θ values increased whereas ΔH _m ^θ and ΔS _m ^θ decreased with increasing alcohol concentration.     

Electroreduction of Dy(III) assisted by Zn and its co-deposition with Zn(II) in LiCl–KCl molten salt

To recover dysprosium (Dy) from LiCl–KCl molten salt, the electrochemical mechanism of Dy(III) on liquid Zn electrode and co-deposition of Dy(III) and Zn(II) on W electrode were studied using electrochemical methods. Cyclic voltammetry results demonstrated that the redox process of Dy on liquid Zn electrode is reversible and controlled by diffusion. Reverse chronopotentiograms showed that the transition time ratio of reduction and oxidation is ~3:1, revealing the redox of Dy on liquid Zn electrode is a kind of soluble–soluble system: Dy(III) + 3e⁻ = (Dy–Zn)_solution. The half-wave potential of Dy(III) was almost constant with the increase in scanning rate. The electrochemical separation of metallic Dy from the molten salt was performed using constant potential electrolysis, and the product characterized using X-ray diffraction and scanning electron microscopy–energy-dispersive X-ray spectroscopy was the thermodynamic unstable compound DyZn₅. Also, the co-deposition mechanism of Dy(III) and Zn(II) was explored, indicating that Dy(III) could deposit on pre-deposited Zn and form Dy–Zn compounds: Zn(II) + 2e⁻ = Zn and xDy(III) + yZn + 3xe⁻ = Dy_xZn_y. Moreover, the effect of Dy(III) concentration on the formation of Dy–Zn compounds was investigated. The redox peak currents corresponding to different Dy–Zn compounds changed with the increase in Dy(III) concentration. The co-deposition of Dy(III) and Zn(II) was performed using constant current electrolysis at diverse Dy(III) concentrations. The different Dy–Zn compounds were produced by controlling Dy(III) concentration.     

Investigations on the redox behaviour of manganese in manganese(II)–saccharin and manganese(II)–saccharin–1,10-phenanthroline complexes

The redox behaviour of manganese system in Mn–Sac and Mn–Sac–Phen complexes were studied using cyclic voltammetry technique at glassy carbon electrode (GCE) in 0.1 M KCl electrolyte. The CV of Mn–Sac solution is more or less similar to that of uncoordinated Mn (in MnCl₂) accept slight difference in peak position and peak current. The presence of secondary ligand phenanthroline (in Mn–Sac–Phen complex) changes the CV of Mn system largely compared to those of uncoordinated Mn and Mn–Sac. The redox system is irreversible in Mn–Sac and quasi-reversible in Mn–Sac–Phen complex. The effect of concentration and pH on the redox behaviour of Mn system have been studied for both the complexes.