Crystal structure,optical properties,and theory study of a 1-D bromoplumbate stabilized by in situ generated N-alkylated DABCO cation

We report the exploration of the stabilization effect of the in situ generated N-alkylated DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) cation in the family of bromoplumbates and a 1-D bromoplumbate, (Et₂DABCO)_2n(Pb₃Br₁₀)_n (1), has been prepared by solvothermal conditions. Optical diffuse reflectance determination shows the band gap of 1 is 3.69 eV, which manifests that 1 is a wide band gap semiconductor. Compared with the band gap of bulk PbBr₂ (3.84 eV), 1 exhibits 0.15 eV red shift of absorption edge. While for the reported iodo analogs of this compound, (MPDA)_2n(Pb₃I₁₀)_n and (Et₂DABCO)_2n(Pb₃I₁₀)_n, they exhibit 0.53 and 0.47 eV blue shift of the energy gaps compared with the measured value of 2.30 eV for bulk PbI₂, respectively. The photoluminescent study of 1 shows that it exhibits a broad emission band centered at 697 nm upon photoexcitation by 345 nm (amount to 3.59 eV). The calculated density of states manifests the theoretical value of the band gap of 1 is 3.422 eV and the origination of photoluminescence can be ascribed to the transition of bonding electrons of Br^– anion to the empty orbits of Pb(II) ion.     

Multipurpose selenophene containing conjugated polymers for optoelectronic applications

In this study, two new conjugated polymers were synthesized including benzotriazole (BTz) as the acceptor unit and selenophene as the π bridge donor segment. These acceptors were coupled with fluorene and carbazole via Suzuki condensation reactions. Electrochemical band gaps were calculated as 2.45 eV for P1 and 2.40 eV for P2. Electrochemical and optical studies of polymers indicate that both polymers are promising candidates for organic solar cell (OSC) and polymer organic light emitting diode (PLED) applications since they have suitable HOMO-LUMO energy levels and appropriate absorption and emission band ranges. Light emitting properties of synthesized polymers were investigated and the highest luminance value was found as 6608cd/m² for P1 at 8 V. Photovoltaic properties of polymers were investigated and the optimized device based on P2 showed 1.75% power conversion efficiency for P2 under AM 1.5 G illumination at 100 mW/cm².     

Synthesis and Characterization of Novel Poly(Arylene Ether)s from 4,4′‐Thiodiphenol

Four novel perfluoroalkylated poly(arylene ether)s have been synthesized successfully using four perfluoroalkyl‐activated bisfluoro monomers. These polymers are synthesized through nucleophilic displacement of the fluorine atoms on the benzene ring with 4,4′‐thiodiphenol and are named as 1a, 1b, 1c and 1d, respectively. The polymers obtained by displacement of the fluorine atoms exhibit weight‐average molar masses up to 3.9×10⁴ g · mol^?1 in Gel permeation chromatography. These poly(arylene ether)s showed very high thermal stability up to 548°C for 10% weight loss in TGA under nitrogen and high glass transition temperature (T_g) up to 178°C in DSC depending on the repeat unit structures. The glass transition temperatures taken as peak in tan δ in DMA measurements are in good agreement with the DSC T_g values. All the polymers synthesized are soluble in a wide range of organic solvent such as CHCl₃, CHCl₂, THF, NMP, DMF and toluene. Transparent thin films of these polymers cast from THF exhibited tensile strengths up to 72 MPa, modulus up to 1.69 GPa with low elongation at break depending on their exact repeating unit structures. Rheological properties showed ease of processability of these polymers with no change in melt viscosity with temperature.     

Facile synthesis of ortho‐Phenylene‐based conjugated polymers through transformation of cross‐conjugated poly(2,3‐diaryl[2]dendralene)s and their optical properties

We studied the facile synthesis of ortho‐phenylene‐based conjugated polymers through transformation of cross‐conjugated polymers having [2]dendralene moiety, poly(2,3‐diaryl[2]dendralene)s ( P1 s), and demonstrated the sequential synthesis of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers from P1 s. P1 s were transformed into cyclohexa‐1,4‐diene‐containing conjugated polymers ( P2 s) through a Diels–Alder reaction. Aromatization of the cyclohexa‐1,4‐diene skeleton was achieved by using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to give the ortho‐phenylene‐containing conjugated polymers ( P3 s). The ultraviolet–visible and fluorescence spectra of the cross‐conjugated polymers P1 s, and the conjugated polymers P2 s and P3 s indicated that the π–π interactions between the arylene moieties in P2 s were stronger than those in P1 s and P3 s. The synthetic method for P2 s and P3 s offers an effective synthesis of various types of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 827–832     

Wide bandgap conjugated polymers based on bithiophene and benzotriazole for bulk heterojunction solar cells: Thiophene versus thieno[3,2-b]thiophene as π-conjugated spacers

Two wide bandgap (WBG) conjugated polymers, P2T-DTTTAZ and P2T-DTTAZ, with donor-π-acceptor (D-π-A) structures was designed and synthesized, utilizing thieno[3,2-b]thiophene (TT) and/or thiophene (T) units as π-bridge in conjugated polymer backbone. And, the wider optical band gap (E_g) of approximately 1.98 eV for P2T-DTTTAZ and 2.09 eV for P2T-DTTAZ were observed. Obviously, replacing T unit with larger conjugated plane TT unit as π-bridges, P2T-DTTTAZ resulted in the red shifted absorption and the reduced band gap, compared with these of P2T-DTTAZ. The polymer solar cells (PSCs) with an inverted device structure based on P2T-DTTTAZ or P2T-DTTAZ as donor and [6,6] phenyl-C₆₁ butyric acid methyl ester (PC₆₁BM) as acceptor were assembled and the photovoltaic properties were also investigated. The power conversion efficiencies (PCEs) of 1.57% for P2T-DTTTAZ and 1.25% for P2T-DTTAZ were obtained.     

Linear and Hyperbranched Poly(arylene ether)s from a New Semifluorinated AB Monomer

A new trifluoromethyl-activated AB monomer has been successfully synthesized by Pd-initiated coupling of 4-bromo anisole with 4-fluoro-3-trifluoromethylphenylboronic acid followed by demethylation. The monomer leads to a semifluorinated poly(arylene ether) by nucleophilic displacement polymerization reaction. The AB monomer has been further copolymerized with a corresponding AB ₂ monomer to form the corresponding semifluorinated hyperbranched (hb) poly(arylene ether). The resulting linear and hb poly(arylene ether)s exhibited weight average molecular weight of 75700 and 144100 g/mol, respectively. The hb copolymer exhibited better solubility in different organic solvents compared to the linear poly(arylene ether). The polymers showed excellent thermal stability up to 522°C at 10% wt loss in air and glass transition temperatures as high as 187°C. The mechanical properties of the linear poly(arylene ether) film 1a exhibited tensile strength at break of 89 MPa, elongation at break of up to 3% and a Young’s modulus value of 2.66 GPa. The films of the polymers were hydrophobic in nature and showed water contact angle as high as 93.6°.     

Syntheses,electrochemical and spectroelectrochemical characterization of benzothiadiazole and benzoselenadiazole based random copolymers

Three novel donor-acceptor-donor type random copolymers based on benzothiadiazole (BTh) and benzoselenadiazole (BSe) were synthesized via Pd (0) catalyzed Suzuki polycondensation reaction. The two acceptor units were coupled with electron rich moieties which are carbazole (CZ), fluorene (FL) and silafluorene (SiFL). Monomers were characterized using ¹H and ¹³C-NMR spectroscopy. The number and weight average molecular weights of the polymers were calculated using gel permeation chromatography (GPC). All three polymers were electrochemically and spectroelectrochemically characterized. PBThBSeCZ, PBThBSeFL and PBThBSeSiFL showed only p-dopable character and their doping/dedoping potentials were determined as 1.4 V/1.2 V, 1.53 V/1.27 V and 1.8 V/1.3 V, respectively. Corresponding HOMO energy levels were calculated as ?5.85 eV, ?6.05 eV and ?6.15 eV whereas LUMO energy levels were found to be ?3.67 eV, ?3.84 eV and ?3.77 eV, respectively. PBThBSeCZ had lower HOMO level and band gap than PBThBSeFL and PBThBSeSiFL due to its increased electron donating capability of nitrogen atom in carbazole unit.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Blue-luminescent poly(p-phenylenevinylene) derivatives: Synthesis and effect of side-group size on the optical properties

New conjugated polymers based on separated PPV-type chromophores and incorporating different types of solubilizing side-groups (ethoxy: P1, hexyloxy: P2, dodecyloxy: P3 and benzyloxy: P4) were synthesized via Wittig polycondensation, using a series of bisphenol A-derived di(triphenylphosphonium) salts as starting monomers. The polymers are soluble in common organic solvents and their structures were confirmed by ¹H NMR, ¹³C NMR and FTIR spectroscopies. The optical properties of these materials were investigated by UV–vis absorption and fluorescence spectroscopies. In dilute solution, quasi-identical fluorescence spectra were obtained and all the polymers showed a blue emission (420, 445 nm) and a narrow spectrum. In thin solid films, the polymers show side-group-dependent optical behavior and, whereas the emission remains blue in the case of P2, P3 and P4, a green fluorescence was observed for the ethoxylated polymer P1. From cyclic voltammetry analysis, the electrochemical band gaps were estimated to be 2.99, 3.07, 3.15 and 3.06 eV for P1, P2, P3 and P4, respectively. Single-layer diode devices of the [indium tin oxide/polymer/aluminum] configuration have been fabricated and show relatively low turn-on voltages between 2.6 and 4.9 V.     

Syntheses,structures and photocatalytic degradation of organic dyes for two isostructural copper coordination polymers involving in situ hydroxylation reaction

Two copper(II) coordination polymers, {[Cu₂(btre)(hsuc)Cl(H₂O)]·1.5H₂O}_n (1) and {[Cu₂(btre)(hsuc)Br(H₂O)]·1.5H₂O}_n (2) (btre = 1,2-bis(1,2,4-triazol-4-yl)ethane, H₃hsuc = 2-hydroxysuccinic acid), were synthesized by the hydrothermal method via in situ hydroxylation reaction with fumarate (fum), btre and CuCl₂/CuBr₂, and characterized by elemental analyses, IR, TG and X-ray diffraction. 1 and 2 are isostructural and show a 4-connected 2-D network based on [Cu₂O] dimers. 1 and 2 show good photocatalytic activity for the degradation of organic dyes methylene blue and methyl orange under UV light irradiation.     

Copolymers Containing 1-Methyl-2-phenyl-imidazole Moieties as Permanent Dipole Generating Units: Synthesis,Spectroscopic, Electrochemical,and Photovoltaic Properties

New donor–acceptor conjugated alternating or random copolymers containing 1-methyl-2-phenylbenzimidazole and benzothiadiazole (P1), diketopyrrolopyrrole (P4), or both acceptors (P2) are reported. The specific feature of these copolymers is the presence of a permanent dipole-bearing moiety (1-methyl-2-phenyl imidazole (MPI)) fused with the 1,4-phenylene ring of the polymer main chain. For comparative reasons, polymers of the same main chain but deprived of the MPI group were prepared, namely, P5 with diketopyrrolopyrrole and P3 with both acceptors. The presence of the permanent dipole results in an increase of the optical band gap from 1.51 eV in P3 to 1.57 eV in P2 and from 1.49 eV in P5 to 1.55 eV in P4. It also has a measurable effect on the ionization potential (IP) and electrochemical band gap (E_g^CV), leading to their decrease from 5.00 and 1.83 eV in P3 to 4.92 and 1.79 eV in P2 as well as from 5.09 and 1.87 eV in P5 to 4.94 and 1.81 eV in P4. Moreover, the presence of permanent dipole lowers the exciton binding energy (E_b) from 0.32 eV in P3 to 0.22 eV in P2 and from 0.38 eV in P5 to 0.26 eV in P4. These dipole-induced changes in the polymer properties should be beneficial for photovoltaic applications. Bulk heterojunction solar cells fabricated from these polymers (with PC₇₁BM acceptor) show low series resistance (r_s), indicating good electrical transport properties. The measured power conversion efficiency (PCE) of 0.54% is limited by the unfavorable morphology of the active layer.     

Transition metal coordination complexes based on V-shaped bis-triazole ligand: syntheses,structures, and properties

Hydrothermal reactions of 1,3-bis(1,2,4-triazol-1-yl)benzene (btb) and M(NO₃)₂ (M = Co²⁺ (1), Cu²⁺ (2)) afforded two new coordination polymers, [Co(btb)₂(NO₃)(H₂O)]_n·NO₃·H₂O (1) and [Cu(btb)₂(NO₃)₂]_n (2), respectively. Single-crystal X-ray diffraction reveals that 1 crystallizes in the space group P2₁/m and 2 crystallizes in the space group Pī, both showing a double-stranded chain structure. The 1-D chains are interconnected via π?π interactions to lead to 2-D ladder-like supramolecular architectures. In addition, magnetic behavior and thermal stability of 1 and 2 have been investigated. For 1, weak antiferromagnetic interactions are observed at low temperature, and the data obey the Curie–Weiss law χ_M = C/(T?θ), with C = 3.22 cm³·mol^?1·K and θ = ?10.39 K. For 2, the decrease of the χT vs. T curve at low temperature is the result of intermolecular antiferromagnetic magnetic interactions.     

Synthesis,structural, electrochemical,and spectroscopic studies of some (diimine)ruthenium nitrile complexes

The syntheses of cationic ruthenium(II) complexes [Ru(Me₂-bpy)(PPh₃)₂RR?][PF₆]_x {Me₂-bpy = 4,4?-dimethyl-2,2?-bipyridine, (3) R = Cl, R? = N≡CMe, x = 1, (4) R = Cl, R? = N≡CPh, x = 1, (5) R = R? = N≡CMe, x = 2} and [Ru(Me₂-bpy)(κ²-dppf)RR?][PF₆]_x {dppf = 1,1?-bis(diphenylphosphino)ferrocene, (6) R = Cl, R? = N≡CMe, x = 1, (7) R = Cl, R? = N≡CPh, x = 1, (8) R = R? = N≡CMe, x = 2} are reported, together with their structural confirmation by NMR (³¹P, ¹H) and IR spectroscopy and elemental analysis, and, in the case of trans-[Ru(Me₂-bpy)(PPh₃)₂(N≡CCH₃)Cl][PF₆] (3), by X-ray crystallography. Electronic absorption and emission spectra of the complexes reveal that all complexes except 4 and 6 are emissive in the range 370–400 nm with 8 exhibiting an emission in the blue. Cyclic voltammetry studies of 3–8 show reversible or quasi-reversible redox processes at ca. 1 V, assigned to the Ru(II/III) couple.     

Narrow bandgap semiconducting polymers for solar cells with near-infrared photo response and low energy loss

The alternating diketopyrrolopyrrole (DPP)-Quinoxaline (Qx) based conjugated polymers are synthesized and investigated as electron donors for polymer solar cells (PSCs). Through the substitution of phenyl in Qx unit at para (p) and meta (m) positions with methoxy group, the resultant DPP-pMQx and DPP-mMQx polymers possess narrow optical band gap (1.32 and 1.26 eV) with relatively low-lying highest occupied molecular orbitals. The obtained photovoltaic devices indicate that the combination of DPP with weak acceptor Qx is helpful to develop narrow bandgap polymers with near-infrared photo response and low energy loss (0.58 eV for DPP-mMQx) in PSC devices.     

The synthesis,characterization, and theoretical hydrogen gas adsorption properties of copper(II)-3,3′-thiodipropionate complexes with imidazole derivatives

Three new coordination polymers, [Cu(μ₃-tdp)(im)₂]_n (1), {[Cu(μ₃-tdp)(1-mim)₂]·0.5H₂O}_n (2) and {[Cu₂(μ₃-tdp)₂(4-mim)₄]·H₂O}_n (3) [tdpH₂ = 3,3′-thiodipropionic acid, im = imidazole, 1-mim = 1-methylimidazole and 4-mim = 4-methylimidazole], have been prepared and characterized by spectroscopic techniques (IR and UV–Vis), elemental analyzes, magnetic measurements, thermal analyzes, and single-crystal X-ray diffraction. Complexes 1–3 crystallize in the monoclinic system with space groups of C2/c and P2₁/c, respectively. In 1–3, tdp is a bridging ligand to form 1-D chains, which are extended into a 2-D layer by hydrogen bonding and π···π interactions. The 3,3′-thiodipropionate exhibits an unexpected coordination mode in 1–3. Simulations were used to assess the potential of the complexes in H₂ storage applications.     

Zn(II)-containing metallo-supramolecular polymers: synthesis,photophysical and electrochemical properties

Abstract

Two novel building blocks M1, M2 with different electronic structures, were synthesized based on 2,2′:6′,2″-terpyridine modified with cyano-p-phenylenevinylene (CN-PV) and carbazole moieties through Knoevenagel condensation and Suzuki coupling, respectively. Directed by transition metal ion Zn²⁺, the metallo-homopolymers P1, P2 and metallo-copolymer P3 were obtained via self-assembly polymerization. The structures of the monomers and metallo-supramolecular polymers were fully characterized by MS, ¹H-NMR and ¹³C-NMR. Meanwhile, the UV–vis absorption, photoluminescence (PL) and electrochemical properties of these compounds were systematically investigated. With respect to that of the monomers, both the UV–vis absorption and PL spectra of the polymers are significantly red-shifted. The resulting metallo-supramolecular polymers show similar double absorption peaks (342, 418?nm for P1, 339, 410?nm for P2, and 332, 412?nm for P3), which is caused by the π–π* transition and intramolecular charge transfer (ICT). Further, all the polymers display red-orange emission in toluene and narrow electrochemical energy gaps of 1.46, 1.65 and 1.48?eV for P1, P2, and P3, respectively.     

Ruthenium(II) carbonyl complexes of P,P and P,O donor diphosphine ligands,Ph2P(CH2)nPPh2 and Ph2P(CH2)nP(O)Ph2, n = 2, 3 and their activities in catalytic transfer hydrogenation reactions

The polymeric precursor [RuCl₂(CO)₂]_n reacts with the ligands, P∩P (a, b) and P∩O (c, d), in 1:1 M ratio to generate six-coordinate complexes [RuCl₂(CO)₂(?²-P∩P)] (1a, 1b) and [RuCl₂(CO)₂(?²-P∩O)] (1c, 1d), where P∩P: Ph₂P(CH₂)_nPPh₂, n = 2(a), 3(b); P∩O: Ph₂P(CH₂)_nP(O)Ph₂, n = 2(c), 3(d). The complexes are characterized by elemental analyses, mass spectrometry, thermal studies, IR, and NMR spectroscopy. 1a–1d are active in catalyzed transfer hydrogenation of acetophenone and its derivatives to corresponding alcohols with turnover frequency (TOF) of 75–290 h^?1. The complexes exhibit higher yield of hydrogenation products than catalyzed by RuCl₃ itself. Among 1a–1d, the Ru(II) complexes of bidentate phosphine (1a, 1b) show higher efficiency than their monoxide analogs (1c, 1d). However, the recycling experiments with the catalysts for hydrogenation of 4-nitroacetophenone exhibit a different trend in which the catalytic activities of 1a, 1b, and 1d decrease considerably, while 1c shows similar activity during the second run.     

BLUE LIGHT EMITTING COPOLY-(ARYLENE ETHER)S CONTAINING A 3,6- DIALKOXYPHTHALIMIDE GROUP

ABSTRACT

Four new bisphenols containing 3,6-dialkoxyphthalimide moieties were prepared in high yields. They were copolymerized with BPA or 2,5-bis(4-hydroxyphenyl)oxadiazole by reaction with decafluorobiphenyl and with NaH as base to give novel copoly(arylene ether)s. The resulting copolymers have glass-transition temperatures (Tg) ranging from 153 to 235°C and very good thermal stabilities with 5% wt loss temperatures (TGA) ranging from 378 to 499°C. These polymers show strong blue light emission in wavelengths ranging from 420 to 430 nm, while their UV absorption peaks vary from 368 to 383 nm. They have excellent solubility in common organic solvents.     

Syntheses,crystal structures and luminescent properties of two new Zn(II) coordination polymers based on a dicarboxylate and different imidazole-containing ligands

To investigate the effect of different imidazole-containing ligands on the structure of coordination polymers, two new Zn(II) coordination polymers based on 1,4-cyclohexanedicarboxylic acid (H₂cda) and two different imidazole-containing ligands, [Zn(cda)(bib)_0.5]_n (1) and [Zn(cda)(bmib)_0.5]_n (2) (bib = 1,4-bis(imidazol-1-yl)benzene and bmib = 1,4-bis(2-methylimidazol-3-ium-yl)benzene), have been synthesized and characterized by single-crystal X-ray diffraction. Complex 1 shows a 3-D structure with point symbol (4.8².10³).(4.8²). Complex 2 displays a 2-D layer structure with an –AB– stacking sequence.     

Synthesis,crystal structures and photoluminescent properties of two Cd(II)/Zn(II) coordination polymers with rarely 8-/2-fold interpenetrated based on 4,4′-stilbenedicarboxylic acid and imidazole ligands

Two coordination polymers, [Cd(sbdc)(bmib)]_n (1) and {[Zn(sbdc)(tib)]·0.5H₂O}_n (2) (H₂sbdc = 4,4′-stilbenedicarboxylic, bmib = 1,4-bis(2-methylimidazol-1-yl)butane, tib = 1,3,5-tris(1-imidazolyl)benzene), have been synthesized under solvothermal conditions, characterized by elemental analysis, infrared spectra, thermogravimetric analysis, and single-crystal X-ray diffraction. Single-crystal X-ray diffraction analysis reveals that 1 and 2 show 8-fold and 2-fold interpenetrating 3-D frameworks, respectively. Complexes 1 and 2 display a 4-connected (6⁶) sqc6 and a 4-connected (4⁴·6²) sql topology, respectively. Photoluminescent and thermal properties of 1 and 2 have also been investigated.