Inhibition Effect of N-(Pyridin-2-yl-Carbamothioyl) Benzamide on the Corrosion of C-Steel in Sulfuric Acid Solutions

N-(Pyridin-2-yl-carbamothioyl)benzamide (PCMB) was newly synthesized and tested as a corrosion inhibitor for C-steel in 0.5 M H₂SO₄ using chemical and electrochemical techniques. Polarization measurements showed that the synthesized compound acted as a mixed inhibitor. The inhibition efficiencies obtained from the different methods were in good agreement. The inhibitive action of this compound is discussed in terms of blocking the electrode surface by adsorption of the inhibitor according to the Langmuir isotherm. The effect of temperature on the corrosion behavior in the absence and presence of 2.5 × 10^?5 M of PCMB was studied (283–308 K). The associated activation energies (E _a) and the thermodynamic parameters (ΔH*, ΔS*, K _ads, ΔG°_ads) for the adsorption process were determined. The ΔG°_ads value is ?36.55 kJ/mol, which indicated that the adsorption mechanism of PCMB on C-steel in 0.5 M H₂SO₄ solution was combined between physisorption and chemisorption processes.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Photocatalytic Degradation of Styrene in Aqueous Solution: Central Composite Design Optimization

In this study, the response surface methodology was first applied to optimize the photocatalytic degradation of styrene in aqueous phase under UV/TiO₂ system. Twenty experiments were done by adjusting three parameters (styrene concentration, TiO₂ dose, and pH) at five levels. Optimal experimental conditions for arbitrary aqueous styrene concentration (115 mg L^?1) were found: initial pH 7 and TiO₂ loading 2 g L^?1 with photocatalytic degradation efficiency of 79.2%. Furthermore, the main degradation intermediate produced was identified by GC/MS. The total organic carbon results revealed that the photocatalysis process could be effectively mineralized. Kinetics of the photocatalytic reaction followed a pseudo-first-order model.     

Adsorptive Removal of Thorium(IV) from Aqueous Solutions Using Synthesized Polyamidoxime Chelating Resin: Equilibrium,Kinetic, and Thermodynamic Studies

In this study, an amidoximated chelating ion exchange resin was prepared by poly-acrylonitrile (PAN) grafted potato starch. The adsorbent characterizations such as specific surface area, pore volume, average pore radius, and Fourier transform infrared (FTIR) spectrum of the resin were measured. The effects of pH, adsorbent dosage, contact time, initial concentration of thorium ion, and temperature on adsorption of thorium ion from aqueous solutions were investigated. Four isotherm models including Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin were applied to analyze the equilibrium isotherm data. The results showed that Langmuir and Temkin models had a good agreement with experimental data. The maximum capacity of the adsorbent using the Langmuir isotherm model was 227.27 mg · g^?1. The kinetic models like pseudo-first-order, pseudo-second-order, Elovich, and intraparticle were examined to describe the adsorption process. The kinetics of the adsorption process was found to follow the pseudo-second-order kinetic model. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) were also calculated using equilibrium constant values at various temperatures (25, 35, 45, 55°C) and the positive value for ΔH° showed an endothermic adsorption process. The study suggests that the prepared adsorbent has promising potential for the removal of thorium from wastewaters.      

Surface and Structural Properties of Gold Nanoparticles and Their Biofunctionalized Derivatives in Aqueous Electrolytes Solution

Gold nanoparticles reduced by sodium citrate (d ～ 10 nm) and purchased gold colloid particles (d ～ 500 nm) were examined and compared. The properties of both gold particles and their biofunctionalized derivatives with L-cysteine and L-glutathione were studied in the presence of sodium nitrate. The structural investigations indicated an aggregated inner structure.

The isoelectric points of pure gold, citrate reduced gold, and functionalized gold were measured and compared. The low isoelectric point of pure gold/water interface was explained by considering the distribution and accumulation of H⁺ and OH^? ions within the interfacial water layer, being more pronounced for OH^? ions.      

Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction

Molecular imprinted polymer for determination of malachite green (MG) and fuchsine basic (FU) dyes by spectrophotometry has been used, to develop a novel simultaneous extraction and preconcentration method. Molecularly imprinted layer-coated nano-alumina (MIP@Nano-Al₂O₃) as adsorbent was prepared by surface molecular imprinting technique, and characterised by FTIR spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis (EDAX) and thermogravimetric analysis (TGA). The method is based on simultaneous extraction of MG and FU dyes from aqueous solution by using molecularly imprinted polymer and measuring the absorbance at 617 and 546 nm for MG and FU, respectively. Parameters which affect the extraction efficiency such as pH, volume of eluent and amount of adsorbent were investigated and optimised. Linear calibration curves were obtained in the range of 2–750 ng mL^?1 for MG and 1–240 ng mL^?1 for FU under optimum conditions. Detection limit based on three times the standard deviation of the blank (3S_b) was 0.655 and 0.245 ng mL^?1 (n = 10) for MG and FU, respectively. The relative standard deviation (RSD) for 100 ng mL^?1 of MG and FU was 2.35 and 3.06% (n = 7), respectively. The method was applied to the simultaneous determination of the dyes in different seafood and environmental water samples.     

The Kinetics of Oxidation of L-Tryptophan by Water-Soluble Colloidal Manganese Dioxide

The kinetics of the oxidation of L-tryptophan by water-soluble colloidal MnO₂ (prepared from potassium permanganate and sodium thiosulfate solutions) has been carried out in aqueous perchloric acid medium at different temperatures. Monitoring the disappearance of the MnO₂ spectrophotometrically at 390 nm was used to follow the kinetics. The first-order kinetics with respect to [L-tryptophan] at low concentrations shifted to zero-order at higher concentrations. The reaction followed first-order with respect to [MnO₂] but fractional-order with respect to [HClO₄]. Adding trapping agents enhanced the rate of the reaction. The Arrhenius and Eyring equations were found valid for the reaction between 35°C and 55°C and different activation parameters (E_a, ΔH^#, ΔS^#) have been evaluated. On the basis of various observations and product characterization a plausible mechanism has been envisaged for the reaction taking place at the colloid surface. The results suggest formation of an adsorption complex between L-tryptophan and MnO₂. The complex decomposes in a rate-determining step, leading to the formation of free radical, which again reacts with the colloidal MnO₂ in a subsequent fast step to yield products. Freundlich isotherm is used to explain the adsorption of L-tryptophan on the colloidal MnO₂.     

Supramolecular inclusion of a pillared double-layered host by an anion-directed second-sphere coordination

In this paper, we have illustrated the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with varieties of guest molecules. A flexible molecule N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine (L1) bearing doubly protonated H-bond donors was designed, capable of forming N–H…Cl hydrogen bonds with a crystallographically unique chloride anion, to construct an anion-directed ligand. The pillared double-layered host framework was constructed by an anion-directed ligand and primary coordination sphere [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interactions. A variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of novel supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2).

We have presented herein the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with a variety of guest molecules. A novel type of a pillared double-layered host framework was constructed by a second-sphere coordination between the anion-directed ligand (L1 = N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine) and [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interaction, and a variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2)

     

Prediction of Density,Surface Tension,and Viscosity of Quaternary Ammonium-Based Ionic Liquids ([N222(n)]Tf2N) by Means of Artificial Intelligence Techniques

In this work, thermophysical properties of quaternary ammonium-based ionic liquids (ILs) including density, surface tension, and viscosity are produced by two powerful artificial intelligence techniques: genetic function approximation (GFA) and artificial neural network (ANN). In proposed GFA and ANN models, the critical temperature and water content of studied ILs ([N_222(n)]Tf₂N with n = 5, 6, 8, 10, and 12) as well as operation temperature were given as the input parameters and the density, surface tension, and viscosity were predicted as the output results. The obtained results reveal that the selected input parameters are appropriate for prediction of thermophysical properties of quaternary ammonium-based ILs. In addition, the high statistical quality represented by various criteria and the low prediction errors of the presented models indicate that they can accurately predict the density, surface tension, and viscosity of new ILs without recourse to experimental data.     

Chemoselective Reduction and Transesterification of α-Keto Propargylic Esters Mediated by NaBH4 and CeCl3 · 7H2O

An efficient one-pot synthesis of α -hydroxy propargylic esters by chemoselective reduction followed by transesterification using NaBH₄ in combination with CeCl₃ · 7H₂O is described.