Bi(OTf)3-catalyzed allylation of epoxides: a facile synthesis of homoallylic alcohols

Epoxides react smoothly with tetraallyltin in the presence of 2 mol% of Bi(OTf)₃ under mild reaction conditions to afford the corresponding homoallylic alcohols in excellent yields with high regioselectivity while aryl aziridines produce exclusively allyl amines in good yields under similar conditions.     

Cooperative Catalysis by Palladium and a Chiral Phosphoric Acid: Enantioselective Amination of Racemic Allylic Alcohols

Cooperative catalysis by [Pd(dba)₂] and the chiral phosphoric acid BA1 in combination with the phosphoramidite ligand L8 enabled the efficient enantioselective amination of racemic allylic alcohols with a variety of functionalized amines. This catalytic protocol is highly regio‐ and stereoselective (up to e.r. 96:4) and furnishes valuable chiral amines in almost quantitative yield.     

Bi(OTf)3-catalyzed allylation of quinones with allyltrimethylsilane

p-Quinones react smoothly with allyltrimethylsilane in the presence of 2 mol% of Bi(OTf)₃ under mild reaction conditions to afford the corresponding allyl substituted benzene derivatives, p-allylquinols and allyl substituted 1,4-naphthoquinones in excellent yields with high regioselectivity. This method is very useful for the direct introduction of an allyl functionality onto a quinone moiety.     

Polystyrene-Supported,Al(OTf)3-Catalyzed Chemoselective Synthesis of Acylals from Aldehydes

Cross-linked polystyrene-supported aluminium triflate [Ps-Al(OTf)₃] has been shown to be a mild, efficient, and chemoselective heterogeneous Lewis acid catalyst for acetylation of aldehydes with acetic anhydride. The catalyst can be recovered simply and reused efficiently at least five times without any noticeable loss of catalytic activity.     

FeCl_3催化吲哚烯丙醇Nazarov环化合成新型稠环吲哚

以吲哚-2-甲醛和取代苯乙酮为原料,经3步反应合成了10个吲哚烯丙基醇(5a~5j);以Fe Cl3·6H2O为催化剂,二氯甲烷为溶剂,5于40℃经分子内Nazarov环化反应,合成了10个新型稠环吲哚(6a~6j),其结构经1H NMR,13C NMR和HR-ESI-MS表征。     

Copper‐Catalyzed Cyanomethylation of Allylic Alcohols with Concomitant 1,2‐Aryl Migration: Efficient Synthesis of Functionalized Ketones Containing an α‐Quaternary Center

A copper‐catalyzed alkylation of allylic alcohols by alkyl nitriles with concomitant 1,2‐aryl migration was developed. Formation of the alkyl nitrile radical was followed by its intermolecular addition to alkenes and the migration of a vicinal aryl group with the concomitant generation of a carbonyl functionality to complete the domino sequence. Mechanistic studies suggested that 1,2‐aryl migration proceeded through a radical pathway (neophyl rearrangement). The protocol provided an efficient route to functionalized ketones containing an α‐quaternary center.     

Simple,Copper(I)-Catalyzed Oxidation of Benzylic/Allylic Alcohols to Carbonyl Compounds: Synthesis of Functionalized Cinnamates in One Pot

An environmentally benign [Cu(I)]-catalyzed oxidation of activated (benzylic/allylic) alcohols to the corresponding carbonyl compounds is presented. Interestingly, the reaction was also compatible with benzylic alcohols containing ortho-bromo substituents on the aromatic ring without competing with the expected intermolecular Buchwald coupling. Significantly, the catalytic system enables the synthesis of cinnamate-esters in a sequential domino one-pot fashion via oxidation followed by Wittig–Horner protocol.     

Ruthenium Complexes with Dendritic Ferrocenyl Phosphanes: Synthesis,Characterization, and Application in the Catalytic Redox Isomerization of Allylic Alcohols

An efficient system for the catalytic redox isomerization of the allylic alcohol 1‐octen‐3‐ol to 3‐octanone is presented. The homogeneous ruthenium(II) catalyst contains a monodentate phosphane ligand with a ferrocene moiety in the backbone and provides 3‐octanone in quantitative yields. The activity is increased by nearly 90 % with respect to the corresponding triphenyl phosphane ruthenium(II) complex. By grafting the catalyst at the surface of a dendrimer, the catalytic activity is further increased. By introducing different spacers between ferrocene and phosphorus, the influence on the electronic properties of the complexes is shown by evaluating the electrochemical behavior of the compounds.     

Chiral Primary Amine/Palladium Dual Catalysis for Asymmetric Allylic Alkylation of β‐Ketocarbonyl Compounds with Allylic Alcohols

An efficient dual catalytic system composed of a chiral primary amine and a palladium complex was developed to promote the direct asymmetric allylic alkylation (AAA) of β‐ketocarbonyl compounds. In particular, the synergistic dual catalytic system enabled the AAA reaction of challenging acyclic aliphatic ketones, such as β‐ketocarbonyl compounds and 1,3‐diketones.     

Cu(OTf)_2-catalyzed ring-opening of epoxides with anilines:A convenient synthesis of β-amino alcohols

The regioselective ring-opening of epoxides with aniline and p-chlorop niline catalyzed by copper(Ⅱ) triflate provides the corresponding β-amino alcohols in excellent yields.     

A Novel Approach to the Stereoselective Synthesis of (E)-1-(1-Alkenyl)Benzotriazoles

The Horner-Wadsworth-Emmons olefination of diethyl-(1-benzotri-azolmethyl)phosphonate by means of aldehydes was found to be a convenient method for the stereoselective preparation of (E)-1-(1-Alkenyl)benzotriazoles.     

Bi(OTf)3-catalyzed conjugate addition of indoles to p-quinones: a facile synthesis of 3-indolyl quinones

A wide range of indoles undergo conjugate addition to p-benzoquinones in the presence of 2 mol% bismuth triflate under mild conditions to afford the corresponding 3-indolyl quinones in excellent yields with high selectivity.     

Sn(OTf)2 and Sc(OTf)3: Efficient and versatile catalysts for the controlled polymerization of lactones

A general and novel method for the controlled synthesis of aliphatic polyesters is presented. The evaluation of stannous (II) trifluoromethane sulfonate [Sn(OTf)₂] and scandium (III) trifluoromethane sulfonate [Sc(OTf)₃] as catalysts for the ring‐opening polymerization (ROP) of various lactones is described as a route to polyesters under mild and highly selective polymerization conditions. Size exclusion chromatograms of poly(ϵ‐caprolactone) initiated from ethanol in the presence of either Sn(OTf)₂ or Sc(OTf)₃ demonstrate the facile synthesis of narrowly dispersed products. Predictable molecular weights, typical of a living or controlled polymerization, were obtained with high yields. These catalysts are versatile and applicable toward the ROP of other cyclic (di)esters, including β‐butyrolactone, which produces the synthetic analogue of the biopolymer poly(β‐hydroxybutyrate). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2067–2074, 2000     

Sc(OTf)3-catalyzed alkylation of indoles with propargyl alcohols: an expeditious synthesis of 3-substituted indoles

Indoles undergo smooth alkylation with propargylic alcohols in the presence of 10 mol % of scandium triflate under mild conditions to produce 3-propargylated indoles in excellent yields with high selectivity.     

Highly Efficient Redox Isomerisation of Allylic Alcohols Catalysed by Pyrazole‐Based Ruthenium(IV) Complexes in Water: Mechanisms of Bifunctional Catalysis in Water

The catalytic activity of ruthenium(IV) ([Ru(η³:η³‐C₁₀H₁₆)Cl₂L]; C₁₀H₁₆=2,7‐dimethylocta‐2,6‐diene‐1,8‐diyl, L=pyrazole, 3‐methylpyrazole, 3,5‐dimethylpyrazole, 3‐methyl‐5‐phenylpyrazole, 2‐(1H‐pyrazol‐3‐yl)phenol or indazole) and ruthenium(II) complexes ([Ru(η⁶‐arene)Cl₂(3,5‐dimethylpyrazole)]; arene=C₆H₆, p‐cymene or C₆Me₆) in the redox isomerisation of allylic alcohols into carbonyl compounds in water is reported. The former show much higher catalytic activity than ruthenium(II) complexes. In particular, a variety of allylic alcohols have been quantitatively isomerised by using [Ru(η³:η³‐C₁₀H₁₆)Cl₂(pyrazole)] as a catalyst; the reactions proceeded faster in water than in THF, and in the absence of base. The isomerisations of monosubstituted alcohols take place rapidly (10–60 min, turn‐over frequency=750–3000 h^?1) and, in some cases, at 35 °C in 60 min. The nature of the aqueous species formed in water by this complex has been analysed by ESI‐MS. To analyse how an aqueous medium can influence the mechanism of the bifunctional catalytic process, DFT calculations (B3LYP) including one or two explicit water molecules and using the polarisable continuum model have been carried out and provide a valuable insight into the role of water on the activity of the bifunctional catalyst. Several mechanisms have been considered and imply the formation of aqua complexes and their deprotonated species generated from [Ru(η³:η³‐C₁₀H₁₆)Cl₂(pyrazole)]. Different competitive pathways based on outer‐sphere mechanisms, which imply hydrogen‐transfer processes, have been analysed. The overall isomerisation implies two hydrogen‐transfer steps from the substrate to the catalyst and subsequent transfer back to the substrate. In addition to the conventional Noyori outer‐sphere mechanism, which involves the pyrazolide ligand, a new mechanism with a hydroxopyrazole complex as the active species can be at work in water. The possibility of formation of an enol, which isomerises easily to the keto form in water, also contributes to the efficiency in water.     

1-Oxa-3-azapentalen-2-ones as Precursors of cis-2-Amino Alcohols: Synthesis from Propargyl Alcohols, CO2, and Amines Using an Intramolecular Amidoalkylation Reaction of Oxazolidin-2-ones

The reaction of 5-methyl-5-(4-methyl-3-pentenyl)-4-methylene-1,3-dioxolan-2-one with primary amines gives the corresponding 4-hydroxy-4-methyloxazolidin-2-ones. These undergo an intramolecular amidoalkylation reaction to form 1-oxa-3-azapentalen-2-ones which are potential precursors of cyclopentanyl cis-2-amino alcohols.     

Synthesis of Bi2O3 and Bi4(SiO4)3 Thin Films by the Sol-Gel Method

Bi2O3 thin films were prepared by dipping silica slides in ethanolic solutions of tris(2,2-6,6-tetramethylheptane-3, 5-dionato)bismuth(III) [Bi(dpm)3] [1] and heating in air at temperatures 500°C. Bi4(SiO4)3 homogeneous thin films were obtained from the reaction of the bismuth oxide coating with the silica glass substrate at temperatures higher than 700°C. For heat treatments at temperatures between 600°C and 700°C, Bi2SiO5 coatings were obtained. The composition and microstructure evolution of the films were determined by Secondary Ion-Mass Spectrometry (SIMS), X-Ray Photoelectron Spectroscopy (XPS) and Glancing Angle X-Ray Diffraction (GA-XRD). The synthesis procedure was reproducible and allowed the control of the Bi2O3 phase composition. Moreover, the thin film annealing parameters were correlated with the formation of bismuth silicates, among which Bi4(SiO4)3 (BSO) is very appealing for the production of fast light-output scintillators [2].