Effect of Phosphorus Compounds on Flame Retardancy and Thermal Degradation of Polycarbonate and Acrylonitrile–Butadiene–Styrene

Phosphorus flame retardants, bis(2,6-dimethylphenyl) phenyl phosphonate (BDMPP) and poly(bisphenol S phenyl phosphonate) (PBSPP), were synthesized and their structures were characterized with Fourier transform infrared spectroscopy, and ¹H and ³¹P nuclear magnetic resonance. The phosphorus compounds were used to impart flame retardancy to polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS). Combustion behaviors and thermal degradation properties of the systems were assayed by limiting oxygen index (LOI), vertical burning test (UL-94), and thermogravimetric analysis. PC/7 wt.% BDMPP and PC/5 wt.% PBSPP pass UL-94 V-0 rating; their LOI values were 32.7% and 33.6% respectively. ABS/35 wt.% BDMPP and ABS/30 wt.% PBSPP also pass the UL-94 V-0 rating and their LOI values were 28.9% and 28.3% respectively. Scanning electron microscopy revealed that the char properties had direct effects on flame retardancy.     

Chemical Analysis of Historic Art and Painting Conservation Materials (19th and 20th Centuries) from the National Museum in Krakow by Gas Chromatography–Mass Spectrometry and Fourier Transform Infrared Spectroscopy

Chemical composition of varnishes Vernis a Tableaux Vibert by Lefranc & Cie, Schutzfirnis für Oelgemalde Schmincke's Retuschier-Firnis by Schmincke & Co. Düsseldorf, Tempera-Firnis by Schmincke & Co. Düsseldorf, Bernstein-Gemaldefirniss für Ludwig'sche Petroleumfarben by Dr. Schoenfeld Düsseldorf, and Vernis Martin Pour Laquer by Lefranc & Cie Paris; oil medium Copal en pâte by Duroziez; essential oils Oleum Cupressi by Polak & Schwarz and Oleum Calami by Polak & Schwarz; fixative for charcoal, crayons, and pastels Nr 840/4 by Iskra & Karmański; and restoring medium for paintings Prof. Dr. Büttner's Phobus by Schmincke Düsseldorf were analyzed with gas chromatography–mass spectrometry. The analyses were conducted to obtain information about the exact composition of these products, which are stored at the National Museum in Krakow and were used by conservators. The results of research facilitate understanding of processes used in paintings and planning methods for their conservation.     

Fourier‐Transform Near‐Infrared Spectroscopy as a Tool for Olive Fruit Classification and Quantitative Analysis

Abstract

The potential of diffuse reflectance near‐infrared spectroscopy combined with pattern recognition to discriminate between olives (Olea europaea L.) of different qualities has been tested. The sample set was formed of sound olive fruits and those showing the most common alterations of olives, which lead to decreased oil quality, namely freeze damages, harvest after falling on the ground, fermentation due to prolonged storage time, and olive tree diseases. Near‐infrared (NIR) spectra were recorded between 9900 and 4100 cm^?1. Preliminary studies of the data set structure were performed using hierarchical cluster analysis and principal component analysis. Discriminant analysis provided prediction abilities of 100% for sound, 79% for frostbite, 96% for ground, and 92% for fermented olives using a leave‐a‐fourth‐out cross‐validation procedure. Quantification of oil and water content in the olives was also approached by using partial least squares (PLS) regression. Results, in terms of predictive ability using a leave‐one‐out cross‐validation, were compared for calibration using the whole sample set and calibrations for the sound and damaged samples separately. Relative errors of prediction using all samples were 7.2% and 3.4% for oil content and humidity, respectively. Using only sound samples, relative errors of prediction of 3.8% and 2.8% for oil and water content, respectively, were obtained. Thus, better accuracy could be achieved when classification of the olive samples prior to quantitative analysis was performed. These results demonstrate the utility of NIR spectroscopy to differentiate olives of different qualities. Using NIR, a fast selection of sound olives in a quality‐orientated production facility becomes feasible.     

Determination of the Heat of Adsorption and Desorption of a Volatile Organic Compound Under Dynamic Conditions Using Fourier‐Transform Infrared Spectroscopy

Quantitative Fourier‐transform infrared spectroscopic analysis was used for the determination of adsorption capacity of a model volatile organic compound (VOC) under dynamic conditions. The analytical method used also offers the possibility of distinguishing between reversible and irreversible adsorption as well as further detection of adsorbed VOC transformation. The obtained adsorbed amounts have been used for the determination of the heat of adsorption and the activation energy of desorption using, respectively, isosteric and temperature programmed desorption methods. The approach has been applied to explore the potential use of local clay as an adsorbent material for VOC pollutants.     

New High-Resolution Analysis of the ν7 and ν9 Fundamental Bands of trans-Formic Acid by Fourier Transform Infrared and Millimeter-Wave Spectroscopy

The high-resolution (0.002 cm⁻¹) spectrum of the ν₇ (OCO scissor mode) and ν₉ (COH torsion mode) fundamental bands of trans-formic acid (HCOOH) at 15.8 μm was recorded by Fourier transform infrared spectroscopy. In addition, millimeter-wave transitions within the 7¹ and 9¹ vibrational states were measured in the spectral range 340-600 GHz. Using these new experimental data, an extensive analysis of the ν₇ and ν₉ bands was performed. The model we have used accounts for the strong A- and B-type Coriolis interactions which couple the 7¹ and 9¹ vibrational states and which were already pointed out in the literature [J. C. Deroche, J. Kauppinen and E. Kyrö, J. Mol. Spectrosc.78, 379-394 (1979); E. Willemot, J. Mol. Spectrosc.120, 246-275 (1986)]. The observed levels are fit to within the experimental accuracy leading to the determination of a precise set of band centers of ν₇ and ν₉ at 686.1656 cm⁻¹ and 640.7251 cm⁻¹, respectively, and rotational and Coriolis constants.     

Analysis of Glasses Coated with Zn–Cr–Sn–O Thin Films by Picosecond Laser-Induced Breakdown Spectroscopy and Transmission Spectroscopy

Journal of Applied Spectroscopy - Glasses coated with different thin fi lm layers exhibit different optical properties. Thus, ZnO thin films with Sn and Cr admixture (ZCTO) were deposited on the...     

Optical Observation of Lung Cancer With Attenuated Total Reflectance–Fourier Transform Infrared Microscope (ATR-FTIR) and Confocal Raman Microscope

ABSTRACT

Optical observation of lung cancer tissues using attenuated total reflectance–Fourier transform infrared microscope (ATR-FTIR) and confocal Raman microscope were performed. A total of six malignant tissues, seven tissues adjacent to cancer, and nine normal tissues from nine patients with known lung cancer were studied. High-quality spectra from human tissues were obtained only in a few seconds. The results revealed that some of the spectral characteristics varied significantly between normal and malignant tissues, that is, IR peak positions, Raman shift, and the spectral intensities. Differences in positions of 10 main peaks in IR shifts and 13 main peaks in Raman shifts were listed, and the intensity changes were also studied between the malignant and normal tissues. The ratios of 1453-cm^?1/1645-cm^?1 intensity in IR spectrum and 1245-cm^?1/1571-cm^?1 intensity in Raman spectrum were found with the most significant difference (p < 0.0001 and p < 0.05 separately) in statistics and may be used in combination to differentiate the normal and malignant tissues. ATR-FTIR spectrum and Raman spectrum were mutually complementary in the observation of many materials and were both found with high sensitivities and spatial resolutions in the observation of human tissues. This study will be helpful to developing rapid and accurate cancer detection techniques in future clinical diagnosis.     

Automated Online Preconcentration System for the Determination of Trace Amounts of Lead Using Pb‐Selective Resin and Inductively Coupled Plasma–Atomic Emission Spectrometry

Abstract

An automated sequential‐injection online preconcentration system was developed for the determination of lead by inductively coupled plasma–atomic emission spectrometry (ICP‐AES). The preconcentration of lead was performed with a minicolumn containing a lead‐selective resin, Analig Pb‐01, which was installed between a selection and a switching valve. In an acidic condition (pH 1), lead could be adsorbed on the resin. The concentrated lead was afterward eluted with 25 µL of 0.06 M nitrilotriacetic acid (NTA) solution (pH 9) and was subsequently transported into the nebulizer of ICP‐AES for quantification. The selectivity of the resin toward lead was examined using a solution containing a mixture of 61 elements. When a sample volume of 5 mL was used, the quantitative collection of lead (≥97%) was achieved, along with an enrichment factor of 19, a sampling frequency of 12 samples hr^?1, a detection limit of 70 pg mL^?1, and a lowest quantification limit of 100 pg mL^?1. The linear dynamic range was 0.1 to 5 ng mL^?1, and the relative standard deviation (n=9) was 0.5% at a 5 ng mL^?1 Pb level. The detection limit of 30 pg mL^?1 and lowest quantification limit of 50 pg mL^?1 could be achieved when 10 mL of sample volume was used. The accuracy of the proposed method was validated by determining lead in the standard reference material of river water (SLRS‐4), and its applicability to the determination of lead in environmental river water samples was demonstrated.     

Monitoring the pH-Dependent Oximation of Methyl Ethyl Ketone and Benzaldehyde by in situ Fourier Transform IR Spectroscopy in a Heterogeneous Liquid–Liquid Two-Phase System

In situ Fourier transform IR spectroscopy was a useful tool in monitoring the pH-dependent and two-step oximation of methyl ethyl ketone and benzaldehyde in a liquid–liquid two-phase system, one phase of which was water. Carrying out the oximations at pH 8, the oximation was complete within 45 min and the corresponding carbonyl compound–hydroxylamine adduct (2) could be detected as an intermediate, but at pH 10, the corresponding oxime (3) was formed faster, practically without the appearance of the intermediate. At pH ～ 2.5 using methyl ethyl ketone, the protonated form of the corresponding oxime (3'a) developed gradually without the transient appearance of the intermediate (2). pH dependence of the 3a → 3'a and 3'a → 3a interconversions were studied in separate experiments.