Efficient Synthesis of Pyrrolo[1,2-f]phenanthridine Derivatives via Dipolar Cycloaddition of Phenanthridine,Activated Acetylenes,and Ethyl Bromopyruvate

The three-component reactions of phenanthridine, activated acetylenes, and ethyl bromopyruvate through both of simultaneous and stepwise process are surveyed. The reactions afforded the corresponding pyrrolo[1,2-f]phenanthridine derivatives in good yields without using any catalyst and activation.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Pd-Catalyzed Cross-Coupling of Acyl Chlorides with In Situ–Generated Alkynylzinc Derivatives for the Synthesis of Ynones

A mild and operationally simple procedure by Pd-catalyzed cross-coupling of acyl chlorides with in situ–generated alkynylzinc derivatives was developed, giving the corresponding ynones in good yields.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® full experimental and spectral details.     

Copper bis(2,2,6,6-Tetramethyl-3,5-heptanedionate)–Catalyzed Coupling of Sodium Azide with Aryl Iodides/Boronic Acids to Aryl Azides or Aryl Amines

This work reports an efficient protocol for the coupling reaction of aryl iodides/boronic acids with sodium azide to aryl azides/amines in the presence of copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate) Cu(TMHD)₂ catalyst. The Cu(TMHD)₂ catalyst is a structurally well-defined, O-containing, air- and moisture-stable, transition-metal complex and works at mild reaction conditions. It was observed that aryl azides can be reduced further to corresponding aniline derivatives using the same catalyst under basic reaction conditions for a prolonged period.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Immobilization of 1,4-Diazabicyclo[2.2.2]Octane (DABCO) over Mesoporous Silica SBA-15: An Efficient Approach for the Synthesis of Functionalized Spirochromenes

Immobilized 1,4-diazabicyclo[2.2.2]octane (DABCO) over mesoporous silica SBA-15 has been found to be an efficient heterogeneous base catalyst for the synthesis of biologically active functionalized spirochromene derivatives via three-component reaction of isatins/acenaphthoquinone, activated methylene reagents, and 1,3-dicarbonyl compounds in aqueous media. This ecofriendly protocol offers several advantages such as a cost-effective procedure with excellent yield, short reaction time, simple workup, recovery and reusability of catalyst, good functional group tolerance, and broad scope of usable substrates.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Ferrocenoyl Benzotriazole,IV: Microwave-Assisted Synthesis of Novel 1,1′-Bis-ferrocenamides

An easily applicable microwave-assisted novel 1,1′-bis-ferrocenoylbenzotriazole-mediated synthesis of novel derivatives for 1,1′-bis-ferrocenamides was applied. This is a cheap, easy, and green method because of microwave irradiation and recovery of benzotriazole.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Vilsmeier Reagent: An Efficient Reagent for the Transformation of 2-Aminobenzamides into Quinazolin-4(3H)-one Derivatives

Clean and easy preparation of quinazolin-4(3H)-one derivatives using 2-aminobenzamides and Vilsmeier reagent is described. 2-Aminobenzamides were converted into the corresponding quinazolinones under mild and efficient conditions, in good yields without undesirable by-products.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

C-S Bond-Forming Reactions of Barbiturylbromide with Isothiocarbamides in Aqueous Media

The C-S cross coupling of pharmaceutically active barbituric acid derivatives has been achieved by the interaction of selective monobromobarbituric acid with thioureas in an aqueous medium. This method is applicable for simple thiourea as well as monosubstituted thioureas, and corresponding products are obtained in good yield.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Role of Additives in Chiral Amine-Catalyzed Direct Aldol Reaction

A systematic study of chiral adducts derived from amines as catalysts for aldol reaction revealed that enantioselective outcome depends on the chiral enamine intermediate and not the face-selective activation of aldehyde. A simple addition compound of proline and 8-hydroxy quinoline was found to be a good catalyst.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Solvent-Free Synthesis of Dihydropyridines and Acridinediones via a Salicylic Acid–Catalyzed Hantzsch Multicomponent Reaction

A multicomponent Hantzsch synthesis of 1,4-dihydropyridines and acridinediones from commercially available aldehydes, ammonium acetate, and ethyl acetoacetate or dimedone, in the presence of salicylic acid as an efficient catalyst, in good yield and short reaction time is reported.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

AgF-Mediated Homocoupling Reaction of Trialkoxy Aryl Silanes

In this article, we present the direct homocoupling reaction of trialkoxy aryl silanes mediated by AgF in moderate to excellent yields in very mild conditions. It is an important complement for the synthesis of symmetrical biaryls by using homocoupling of trialkoxy silanes. In this reaction, no other catalyst such as Pd or Cu was necessary.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for full experimental and spectral details.     

Evaluation of Baylis–Hillman Routes to 3-(Aminomethyl)coumarin Derivatives

The relative merits of two different Baylis–Hillman approaches toward the preparation of coumarin derivatives, containing peptide-like side chains, have been explored. In one approach, use of methyl acrylate as the activated alkene requires a protecting group strategy, an approach that is not necessary when using tert-butyl acrylate.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis of β-Aryl-β-sulfanyl Ketones by a Sequential One-Pot Reaction Using KF/Al2O3 in Glycerol

The title compounds were synthesized by a sequential one-pot reaction of aryl aldehydes, aryl-methyl ketones, and thiols promoted by KF/Al₂O₃. This methodology affords a large number of β-aryl-β-sulfanyl ketone derivatives from aliphatic and aromatic thiols in good yields and is also applicable for solid substrates.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Efficient Deallylation of Allyl Phenyl Ethers by Molecular Iodine in PEG-400 and Their Utility for Flavone Synthesis

Rapid and efficient deallylation of allyl phenyl ethers by molecular iodine (20 mol%) in polyethylene glycol-400 at 60 °C has been reported. This method has short reaction time, readily available catalyst, and reuse of reaction medium with good yield. The utility of this methodology has been extended to flavone synthesis.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Expeditious Synthesis of Aromatic Cyanodienones Using Neutral Alumina as a Versatile Heterogeneous Catalyst

The work described herein employs neutral alumina as an effective catalyst for ring opening of triarylpyrylium perchlorates to corresponding aromatic cyanodienones, which have main roles in biological activities. The present porous catalyst has several advantages, it is inexpensive, thermally and mechanically stable, nontoxic, and highly resistant against organic solvents. It increases the reaction rate many fold when compared with conventional reaction conditions. Moreover, the recovered alumina can be used several times without serious decrease in activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Facile Synthesis of Benzotriazole Derivatives Using Nanoparticles of Organosilane-Based Nitrite Ionic Liquid Immobilized on Silica and Two Room-Temperature Nitrite Ionic Liquids

Nanoparticles of organosilane-based nitrite ionic liquid immobilized on silica, 1-butyl-3-methylimidazolium nitrite, and 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite were used as effective reagents for the preparation of benzotriazole derivatives from 1,2-diaminobenzenes at room temperature under mild solvent-free conditions. These ionic liquids play as nitrosonium sources in this procedure.1,2-Diaminobenzene derivatives have been treated with ionic liquids to give the related diaminobenzenes in very good to excellent yields in short reaction times.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the full experimental and spectral details.     

Aluminium Chloride–Catalyzed Synthesis of 4-Benzyl Cinnolines from Aryl Hydrazones

An efficient synthesis of 4-benzyl cinnolines from aryl phenylallylidene hydrazone is described. In this report aluminium chloride as a Lewis acid catalyst and toluene as a solvent are used for the synthesis. This method is expected to more advantageous than the other reported methods of synthesis of the cinnoline rings because of its low cost, better yield, and benign reaction conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

5-Ethoxymethylidene-4-thioxo-2-thiazolidinone as Versatile Building Block for Novel Biorelevant Small Molecules with Thiopyrano[2,3-d][1,3]thiazole Core

5-Ethoxymethylidene-4-thioxo-2-thiazolidinone was studied as versatile core building block in the synthesis of new thiopyrano[2,3-d]thiazole derivatives relevant for medicinal chemistry purposes under hetero-Diels–Alder reaction conditions. Promising compounds (6, 10) were identified among synthesized series with high antitumor and moderate antiviral activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Green and Reusable Synthetic Procedure for Pyridine N-Oxides Catalyzed by a Lacunary Polyoxometalate

A lacunary Keggin polyoxometalate of K₈[BW₁₁O₃₉H] · 13H₂O was used as an effective and reusable catalyst for pyridine oxidation. Good yields of pyridine N-oxides were obtained in this catalytic system with hydrogen peroxide in water under mild conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Simple and Efficient Method for the Synthesis of 1-((Aryl)(2-oxoindolin-3-yl-)methyl)urea and 1-((Aryl)(2-oxoindolin-3-yl-)methyl)thiourea Derivatives

A number of new1-((aryl)(2-oxoindolin-3-yl)methyl)urea and 1-((aryl)(2-oxoindolin-3-yl)methyl)thiourea derivatives have been prepared by simply combining 2-indolinone, aromatic aldehyde, and urea or thiourea in the presence of p-TsOH in EtOH. This new methodology affords the title compounds in good yields and without the use of chromatography.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Saccharin as an Organocatalyst for Quinoxalines and Pyrido[2,3-b]pyrazines Syntheses

A room-temperature procedure using saccharin as catalyst has been described for the cyclocondensation of different 1,2-arylenediamines with various 1,2-dicarbonyl compounds, yielding either quinoxalines or pyrido[2,3-b]pyrazines. The reactions proceed in very short reaction times in methanol, and the target heterocycles are isolated in quantitative yields after addition of water, filtration, and drying. Substituted pyrido[2,3-b]pyrazines can also be reached regioselectively by reacting α-ketoaldehydes with 2,3-diaminopyridine.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]