Oxidation of Benzaldehydes to Benzoate Esters Using Household Bleach and Sodium Iodide in Alcohol Solvents

Various substituted benzaldehydes were converted into benzoate esters with household bleach and sodium iodide in an alcohol solvent. The reaction works best with methanol. Only 4-chlorobenzaldehyde, 3-nitrobenzaldehyde, and 4-nitrobenzaldehyde reacted completely with 1-propanol under these conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

One-Pot,Catalyst-Free Synthesis of Spirooxindole and 4H-Pyran Derivatives

The synthesis of biologically valuable spirooxindoles and 4H-pyrans is described under catalyst-free conditions through sequential Knoevenagel–Michael–cyclization reactions from isatin or aromatic aldehyde, malononitrile, and 1,3-dicarbonyl compounds. The reaction conditions are very simple, providing excellent yield.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Convenient Synthesis of Monobenzylated Hydrazides via Aqueous Zinc-Mediated Addition Reactions

Addition of substituted benzyl bromides to dialkyl azodicarboxylates under aqueous zinc-mediated addition conditions occurs readily to afford monobenzylated hydrazides in good to excellent yields. The reaction is tolerant of a variety of substituents on the benzyl bromide ring. Several dialkyl azodicarboxylates were successfully tested under the reaction conditions. The limitations of the reaction are also addressed.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Reexamination of the Bromination of 2-Nitrobenzaldehyde with NBS or NaBr-NaIO4 in Sulfuric Acid

Two literature procedures for selective bromination of 2-nitrobenzaldehyde using N-bromosuccinimide (NBS) or NaBr-NaIO₄ in sulfuric acid were examined. In contrast to the reports that 4-bromo-2-nitrobenzaldehyde is formed as a single product in good yield, reactions using NBS gave a number of isomeric mono- and dibrominated products identified by spectroscopical methods and by sodium borohydride reduction to the corresponding benzyl alcohol, and reactions using NaBr-NaIO₄ did not furnish any product.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Evaluation of Baylis–Hillman Routes to 3-(Aminomethyl)coumarin Derivatives

The relative merits of two different Baylis–Hillman approaches toward the preparation of coumarin derivatives, containing peptide-like side chains, have been explored. In one approach, use of methyl acrylate as the activated alkene requires a protecting group strategy, an approach that is not necessary when using tert-butyl acrylate.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Mild,Selective Oxidation of Aromatic Alcohols Using β-Cyclodextrin-Functionalized Glass Microparticles: Characterization,Stability, and Application

The surface of glass microparticle (GMP) was functionalized with β-cyclodextrin (→ GMP-β-CD) and was characterized by x-ray photoelectron spectroscopy (XPS). GMP-β-CD was used to catalyze oxidation of alcohols into aldehydes and katones with excellent yield (86–92%). The modified surface of GMP-β-CD showed no change or degradation after repeated use as confirmed from XPS analysis after 10 cycles.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Simple and Efficient Method for the Synthesis of 1-((Aryl)(2-oxoindolin-3-yl-)methyl)urea and 1-((Aryl)(2-oxoindolin-3-yl-)methyl)thiourea Derivatives

A number of new1-((aryl)(2-oxoindolin-3-yl)methyl)urea and 1-((aryl)(2-oxoindolin-3-yl)methyl)thiourea derivatives have been prepared by simply combining 2-indolinone, aromatic aldehyde, and urea or thiourea in the presence of p-TsOH in EtOH. This new methodology affords the title compounds in good yields and without the use of chromatography.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Bromination of Arenes Using I2O5-KBr in Water

An efficient and environmentally benign bromination of various aromatic compounds using aN aqueous I₂O₅-KBr system at room temperature has been developed in this work. A series of aromatic compounds such as acetophenones, benzaldehydes, benzoic acids, anilines, amides, and aminopyridine have been successfully brominated in excellent regioselectivities and good yields under the typical reaction conditions. The features of KBr as brominating reagent, water as solvent, and mild conditions make this system an attractive synthetic procedure.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Lanthanum Triflate–Catalyzed Rapid Oxidation of Secondary Alcohols Using Hydrogen Peroxide Urea Adduct (UHP) in Ionic Liquid

A convenient and efficient protocol for the oxidation of secondary hydroxyl group to ketone using hydrogen peroxide–urea adduct and catalytic (CF₃SO₃)₃La in ionic liquid has been developed. A number of 1,2-diols, α-hydroxyketones, and other aromatic and aliphatic secondary alcohols have been successfully oxidized to the corresponding ketones using this protocol in good yields and short reaction times.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Facile One-Pot Synthesis of 1,2,3-Triazoles Featuring Oxygen,Nitrogen, and Sulfur Functionalized Pendant Arms

A practical and efficient one-pot synthesis of novel 1,2,3-triazoles featuring nitrogen, oxygen, and sulfur functionalized pendant arms has been developed. The click reaction of mono-propargyl derivatives supported by aniline, thiophenol, and benzyl alcohol, with sodium azide and p-substituted benzyl halogenides, renders a series of N-substituted-1,2,3-triazoles in good yields under mild reaction conditions. The catalyst system was based in Cu(OAc)₂ · H₂O, sodium L-ascorbate, and 1,10-phenanthroline monohydrate, and all reactions were performed in a mixture H₂O–ethanol (4:1 v/v). Additionally, the preparation of bis-1,2,3-triazoles supported by di-propargylated aniline was carried out, demonstrating the versatility of the present methodology.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Pd-Catalyzed Cross-Coupling of Acyl Chlorides with In Situ–Generated Alkynylzinc Derivatives for the Synthesis of Ynones

A mild and operationally simple procedure by Pd-catalyzed cross-coupling of acyl chlorides with in situ–generated alkynylzinc derivatives was developed, giving the corresponding ynones in good yields.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® full experimental and spectral details.     

Solvent-Free Synthesis of Dihydropyridines and Acridinediones via a Salicylic Acid–Catalyzed Hantzsch Multicomponent Reaction

A multicomponent Hantzsch synthesis of 1,4-dihydropyridines and acridinediones from commercially available aldehydes, ammonium acetate, and ethyl acetoacetate or dimedone, in the presence of salicylic acid as an efficient catalyst, in good yield and short reaction time is reported.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

C-S Bond-Forming Reactions of Barbiturylbromide with Isothiocarbamides in Aqueous Media

The C-S cross coupling of pharmaceutically active barbituric acid derivatives has been achieved by the interaction of selective monobromobarbituric acid with thioureas in an aqueous medium. This method is applicable for simple thiourea as well as monosubstituted thioureas, and corresponding products are obtained in good yield.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Unexpected Transformation of Aldehydes into Benzoins with Copper(I)/Samarium

The reductive coupling of aldehydes to afford pinacolic alcohols using all kinds of reducing agents involving samarium is well known. In this report, however, treatment of aromatic aldehydes with Cu(I)/Sm system produces benoins and/or benzils in good yields. A possible mechanism is proposed where Cu(I) not only activates the Sm metal but also promotes the dehydrogenation of the intermediates, during which a Cu(III) species may be involved.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Pd-Catalyzed Reduction of Aldehydes to Alcohols Using Formic Acid as the Hydrogen Donor

Facile and selective reduction of aromatic aldehydes as well as aliphatic aldehydes to alcohols was achieved using formic acid as the hydrogen donor in the presence of a catalytic amount of Pd(OAc)₂ and Cy₃P. It was found that both hydrogen atoms in the formic acid molecule can serve as the hydride source.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

One-Pot Esterification and Amide Formation via Acid-Catalyzed Dehydration and Ritter Reactions

Esterification of carboxylic acid is achieved using acetonitrile as a water trap. Water liberated during esterification is consumed in cyanide hydrolysis, thereby driving the esterification to completion. Substrates having carboxylic acid and nitrile groups undergo intramolecular dehydration and rehydration to amido esters in the absence of acetonitrile. Cyano acids also undergo esterification and Ritter reaction in one pot when excess alcohol is used. For the first time, we have observed an interesting Ritter reaction of primary alcohols, leading to ester amide product in one pot.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Efficient Room-Temperature Synthesis and Antimicrobial Study of Novel 2-Aroylbenzofuran-3-ols from Substituted Methyl Salicylates and Phenacyl Bromides

The article describes a convenient and efficient synthetic route for the construction of 2-aroylbenzofuran-3-ols from readily available diverse methyl salicylates and phenacyl bromides using K₂CO₃ as catalyst in dimethylformamide as solvent at room temperature. The reaction involves two steps, which occur in quick succession within 1 h to deliver the product with reasonably high yields. All the synthesized 2-aroylbenzofuran-3-ols (4a–u) were subjected for their antimicrobial studies, and some of these have shown prominent activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis and CuAAC Reactions of Azidoalkylethoxysilanes: Grafting CuAAC Products onto Silica Surface

One-pot synthetic protocols of novel azido functionalized silane coupling agents from corresponding terminal mesylated or tosylated 1-olefins were developed. Azido groups were successfully converted to the corresponding 1,2,3-triazol ring by the copper-catalyzed azido alkyne coupling (CuAAC) reaction without alkoxysilane decomposition. The CuAAC product was readily grafted onto the silica surface in good yield.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Efficient Deallylation of Allyl Phenyl Ethers by Molecular Iodine in PEG-400 and Their Utility for Flavone Synthesis

Rapid and efficient deallylation of allyl phenyl ethers by molecular iodine (20 mol%) in polyethylene glycol-400 at 60 °C has been reported. This method has short reaction time, readily available catalyst, and reuse of reaction medium with good yield. The utility of this methodology has been extended to flavone synthesis.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Aluminium Chloride–Catalyzed Synthesis of 4-Benzyl Cinnolines from Aryl Hydrazones

An efficient synthesis of 4-benzyl cinnolines from aryl phenylallylidene hydrazone is described. In this report aluminium chloride as a Lewis acid catalyst and toluene as a solvent are used for the synthesis. This method is expected to more advantageous than the other reported methods of synthesis of the cinnoline rings because of its low cost, better yield, and benign reaction conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]