Carbonization of Chitosan in Palladium-Chitosan/ Montmorillonite Composites to Prepare Novel Heterogeneous Catalysts for Heck Reactions

Palladium-carbon/montmorillonite (Pd-C/MMT) heterogeneous catalysts were prepared by carbonization of chitosan in palladium-chitosan/montmorillonite (Pd-CS/MMT) composites under a N₂ atmosphere. The main purpose of this study was to determine the effects of the carbonization temperature (250, 450, and 650°C) on the material microstructure and its catalytic performance. X-ray diffraction patterns revealed that the formation of an intercalation of the carbonaceous material between the clay mineral layers which was also confirmed by Fourier transform infrared spectra results. The N content of the Pd-C/MMT catalyst decreased as the carbonization temperature was increased. Thermogravimetry curves revealed that the thermal stability of the Pd-C/MMT catalyst increased obviously as the carbonization temperature was increased. Pd nanoparticles, sized at about 20 nm, were mainly dispersed on the surface of the MMT, as observed by high-resolution transmission electron microscopy (HR-TEM). The prepared Pd-C/MMT catalysts had good catalytic activity when applied in Heck coupling reactions of aromatic halides and alkenes to produce aryl olefins. The relations between the recyclability and the material composition are discussed.     

Theories of surface elasticity for nanoscale objects

The emergence of nanotechnology has driven recent interest in systems having surface atoms as a significant fraction of all atoms present, in particular nano-sheets (ultra-thin slabs), nano-wires, and nano-particles. In these systems, the bulk (i.e. non-surface region or interior) is typically strained in response to the stress of the surface. This elastic strain of the bulk in turn changes the surface lattice constants. Since the bulk and the surface are coupled, the problem must be solved self-consistently. Solving this problem requires a quantitative model of the surface elastic properties which are different from the bulk. In this paper we consider various models that have been proposed for surface elasticity. Our goal is to elucidate the relationship between two contrasting approaches: (1) the Shuttleworth equation which defines a surface stress based on the strain derivative of the surface energy and (2) the Gurtin-Murdoch (GM) theory which considers the surface layer as a membrane with residual strain and with elastic constants different from the bulk. The GM theory is analogous to the 2-D Frenkel-Kontorova (FK) model and can be used to obtain quantitative parameters for the FK model. We present an embedded atom method calculation of the surface elastic constants of Cu(1 1 1) using the GM theory with the surface represented by a membrane one atomic layer thick. This quantitative approach describes the elastic properties of surfaces in a physically appealing way. Just as the bulk elastic constants provide direct information regarding the stress/strain relationship in a bulk material, the surface elastic constants provide similar information for a surface monolayer. This theory will allow elasticity analysis and atomistic calculations of properties of nano-scale objects.     

Effect of Surfactant Concentration on Thermal and Mechanical Properties of Poly(Butylene Succinate)/Organoclay Composites

Composite materials consisting of poly(butylene succinate) (PBS) and montmorillonite (MMT), modified to various extents using trihexyltetradecylphosphonium chloride (THTDP) cations, were prepared using a simple melt intercalation technique. The surfactant contents were varied, i.e. 0.4, 0.6, 0.8, 1.0, and 1.2 times the cation exchange capacity (CEC) of the MMT. The intercalation of the surfactant molecules into MMT layers, confirmed by the increase in interlayer spacing and significant changes in the morphology of the modified MMT, facilitated the dispersion of the clay in the PBS matrix. The properties of the PBS-based composites were changed with increasing surfactant content. The melting and crystallization temperatures increased and the degree of crystallinity (χ_c) decreased. The storage modulus was significantly enhanced below the glass transition temperature (Tg), and Tg shifted to a higher temperature, with a maximum at a surfactant loading of 0.6 CEC. The mechanical properties, including tensile strength, flexural strength, flexural modulus and impact strength, increased and then decreased with surfactant loading, with the maximum observed also at a surfactant loading of 0.6 CEC. In conclusion, an ideal balance between thermal and mechanical properties can be obtained at a surfactant quantity equivalent to 0.6 times the clay CEC. Moreover, all the composites exhibited obvious improvement in thermal and mechanical properties as compared to those of neat PBS.     

Characterization of PEO/PVP/GO nanocomposite solid polymer electrolyte membranes: microstructural,thermo-mechanical,and conductivity properties

Poly (ethylene oxide) (PEO)/polyvinylpyrrolidone (PVP) blended nanocomposite polymers, incorporating graphene oxide (GO) nano-sheets and embedded with NaIO₄ salt, were prepared using solution casting technique. The as-prepared nanocomposite electrolyte membranes were characterized by SEM, TEM, XRD, and Raman vibrational spectroscopic techniques to confirm the dispersion of GO nano-sheets and to understand the synergistic properties of GO/polymer interactions as a function of GO nano-sheets concentration. GO fillers incorporated electrolyte membranes demonstrated distinctive surface morphology composed of circular-shaped protuberances of different dimensions. The decrease of Raman intensity ratio (I_D/I_G) and in-plane crystallite size (L_a) values of the nanocomposites suggested the good dispersion and confinement of the GO nano-sheets. The optical properties of blend electrolyte films were studied as a function of GO filler concentration using optical absorption and diffuse reflectance spectra. In reference to PEO/PVP/NaIO₄, the resultant PEO/PVP/NaIO₄/GO (0.4% in weight) electrolyte membrane demonstrated both an increase in tensile strength of ca. 42% and in Young’s modulus of ca. 40%, improvements coupled with a maximum fractured elongation of 3%. Through impedance spectroscopy analysis, the role of the GO nano-sheets onto the room temperature conductivity properties of the prepared electrolyte membranes has been probed.     

超高强块体非晶合金的研究进展

研制具有极限力学性能的金属材料一直是材料研究人员的梦想.超高强块体非晶合金是一类具有极高断裂强度(4 GPa)、高热稳定性(玻璃化转变温度通常高于800 K)和高硬度(通常高于12 GPa)的新型先进金属材料,其代表合金材料Co-Ta-B的断裂强度可达6 GPa,为目前公开报道的块体金属材料的强度记录值.本文系统地综述了该类超高强度块体非晶合金的组分、热学性能、弹性模量及力学性能,阐述了该类材料的研发历程;以弹性模量为联系桥梁,阐明了该类超高强块体非晶合金材料各物理性能的关联性,并揭示了其高强度、高硬度的价键本质.相关内容对于材料工作者了解该类超高强度金属材料的性能和特点,并推进该类材料在航空航天先进制造、超持久部件、机械加工等领域的实际应用有着重要意义.     

Organometal Halide Perovskites: Bulk Low‐Dimension Materials and Nanoparticles

Organometal halide perovskites (hybrid perovskites) contain an anionic metal–halogen‐semiconducting framework and charge‐compensating organic cations. As hybrid materials, they combine useful properties of both organic and inorganic materials, such as plastic mechanical properties and good electronic mobility related to organic and inorganic material, respectively. They are prepared from abundant and low cost starting compounds. The perovskite stoichiometry is associated with the dimensionality of its inorganic framework, which can vary from three to zero, 3D consisting of corner‐sharing MX₆ octahedra, and 0D consisting of isolated octahedra. Small‐sized organic cations can fit into the MX₆ octahedra of the 3D framework and in all dimensions organic cations surround the inorganic framework. Regarding the low dimensionality in the material, this refers to at least one of its dimensions being shorter than approximately 100 nanometers. These materials should be considered as genuine nanomaterials or as bulk materials depending on whether they have three or less than three dimensions on the nanoscale, respectively. In principle, hybrid perovskite nanoparticles can be prepared with different shapes and with inorganic framework dimensionalities varying from 0D to 3D, and this also applies to the bulk material. This report is mainly focused on the unique properties of organometal halide perovskite nanoparticles.     

Interface transport properties in ion-gated nano-sheets

Recent advances in atomic-scale preparation of ultrathin nano-sheets and efficient field-effect gating mediated by movement of ions have provided a prolific paradigm for creating exotic states at interfaces of a new-type of device called electric-double layer transistors (EDLTs). We present a short review on these liquid/solid interfaces formed on nano-sheets prepared by micro cleaving a bulk layered single crystal, which can be electrostatically doped to a high carrier density of ～10¹⁴ cm^?2. Atomically flat surfaces prepared on various layered materials allowed ideal transport when they acted as transistor channels after accumulating dense carriers. The unique system combining these two advantages enabled observations of novel transport phenomena showing quantum phase transition of charge and spin states controlled by electric field. Examples include gate-induced metal-insulator transition, opening of new transport channels, and field-induced interface superconductivity, which present a rapidly growing field with emerging opportunities for science and technology.     

A Novel Potential Ecomaterial Based on Poly(p-Dioxanone)/Montmorillonite Nanocomposite With Improved Crystalline,Processing, and Mechanical Properties

Poly(p-dioxanone) (PPDO) is a useful biomaterial and potential ecomaterial due to its biodegradability and good mechanical properties. Like other aliphatic polyesters, however, it has a low crystallization rate and low melt strength; it is difficult to produce thin films from it by blown film processing. In this work, poly(p-dioxanone)/montmorillonite (MMT) nanocomposites have been prepared successfully by in situ ring-opening polymerization of p-dioxanone and MMTs. The novel, biodegradable nanocomposites have a remarkably increased crystallization rate and melt strength; moreover, they can be blown into thin films, which have excellent mechanical properties. A typical sample showed a tensile strength of 59.2 MPa and elongation at break 605%.     

Preparation and Characterization of Silicon-containing Polyarylacetylene/montmorilloite Nanocomposites

Dimethylphenylpropargyl ammonium bromide (DMPPAB) was synthesized and used to modify pristine montmorillonite (MMT) by a cation exchange process. The organically modified montmorillonite (OMMT) was verified and used to mix with a silicon-containing polyarylacetylene (PSA) as well as MMT. The PSA/MMT and PSA/OMMT nanocomposites were prepared by solution under sonication and melting intercalation processes, respectively, and then cured by a step heating process. The thermal and flexural properties of the cured PSA and nanocomposites were studied by thermogravimetric and dynamic mechanical analysis. The results showed that the intercalation of DMPPAB into the MMT galleries made the d-spacing enlarge. During PSA curing, the cure heat of PSA caused the MMT and OMMT to delaminate and exfoliate in the PSA matrix. The glass transition temperature of the cured PSA and nanocomposites were higher than 500?°C. The inner acetylenic groups in the PSA resin could further crosslink above 300?°C. The temperature at 5% mass loss of the cured PSA decreased by 4.6% with 3% mass fraction of OMMT loading, and the char yield of the cured PSA changed only slightly. The flexural strength of the cured PSA was augmented with addition of MMT or OMMT, but the flexural modulus of the cured PSA decreased slightly. The flexural strength of the cured nanocomposite increased from 20.1?MPa to 30.1?MPa when 3% mass fraction of OMMT was added into the PSA matrix.     

Effect of melt compounding temperature on dielectric relaxation and ionic conduction in PEO–NaClO<Subscript>4</Subscript>–MMT nanocomposite electrolytes

Polymer nanocomposite electrolytes (PNCEs) of poly(ethylene oxide) and sodium perchlorate monohydrate complexes with montmorillonite (MMT) clay up to 20 wt.% MMT concentration of poly(ethylene oxide) (PEO) are synthesized by melt compounding technique at melting temperature of PEO (∼70 °C) and NaClO₄ monohydrate (∼140 °C). Complex dielectric function, electric modulus, alternating current (ac) electrical conductivity, and impedance properties of these PNCEs films are investigated in the frequency range 20 Hz to 1 MHz at ambient temperature. The direct current conductivity of these materials was determined by fitting the frequency-dependent ac conductivity spectra to the Jonscher power law. The PNCEs films synthesized at melting temperature of NaClO₄ monohydrate have conductivity values lower than that of synthesized at PEO melting temperature. The complex impedance plane plots of these PNCEs films have a semicircular arc in upper frequency region corresponding to the bulk material properties and are followed by a spike in the lower frequency range owing to the electrode polarization phenomena. Relaxation times of electrode polarization and ionic conduction relaxation processes are determined from the frequency values corresponding to peaks in loss tangent and electric modulus loss spectra, respectively. A correlation is observed between the ionic conductivity and dielectric relaxation processes in the investigated PNCEs materials of varying MMT clay concentration. The scaled ac conductivity spectra of these PNCEs materials also obey the ac universality law.     

Morphology and Properties of Poly(vinyl alcohol)/MMT Nanocomposite Prepared by Solid-state Shear Milling (S3M)

Poly(vinyl alcohol) (PVA)/montmorillonite (MMT) nanocomposites were prepared by combining solid-state shear milling (S³M) technology with melt intercalation. Compared with the composite obtained by simple melt intercalation, more MMT layers were exfoliated and apparently oriented along the injection molding direction in the nanocomposite prepared by combining S³M technology and melt intercalation, which greatly increased the orientation degree of MMT, resulting in the greater interactions between PVA and MMT layers. Simultaneously, this also promoted the orientation of PVA molecules and produced effective nucleation of the crystallization of PVA. Consequently, the thermal stability and mechanical properties of PVA were obviously improved. For instance, when the MMT content was 3 wt%, the tensile strength and modulus of the nanocomposite with MMT prepared by S³M were 98.9 MPa and 3.1 GPa, respectively, increasing by 52% and 63.2% compared with PVA.     

Preparation and properties of polyurethane/MMT nanocomposite actuators

This study dealt with the electrostrictive response of a polyurethane (PU)/clay nanocomposite film, which was a promising candidate for a material to be used in polymer actuators. The nanocomposites were produced by using three types of montmorillonites (MMTs) such as natural MMT (Cloisite^®Na⁺), hydrophobic MMT (Cloisite^® 20A), and hydrophilic MMT (Cloisite^® 30B). The nanometer-scale silicate layers of organo-clay were completely exfoliated in PU for the cases of 1, 3 and 5 wt% PU/MMT nanocomposites as confirmed by wide X-ray diffraction (WAXD) profiles. Actuation tests indicated that the displacement of PU/MMT nanocomposite actuator was larger than pure PU actuator, caused by an increase in dielectric constant. Especially, PU/MMT nanocomposite actuator with Cloisite^® 30B had the largest displacement and it became possible to operate at low voltage.     

"Ideal" engineering alloys

A newly discovered group of alloys, called Gum Metals, approaches ideal strength in bulk form, exhibits significant plastic deformation prior to failure, and shows no indications of conventional-dislocation activity. Two conditions must be met for a material to exhibit this "ideal" behavior: (1) the stress required to trigger conventional-dislocation plasticity in the material must exceed its ideal strength, and (2) the material must be intrinsically ductile when stressed to ideal strength. Gum Metals satisfy both criteria, explaining their remarkable mechanical properties.     

Ductile Bulk Aluminum-Based Alloy with Good Glass-Forming Ability and High Strength

Based on a new approach for designing glassy alloy compositions, bulk Al-based alloys with good glass-forming ability （GFA） are synthesized. The cast Al86Si0.5Ni4.06Co2.94 Y6Sc0.5 rod with a diameter of i mm shows almost fully amorphous structure besides about 5% fcc-Al nucleated in the center of the rod. The bulk alloy with high Al concentration exhibits an ultrahigh yield strength of 1.18 GPa and maximum strength of 1.27 GPa as well as an obvious plastic strain of about 2.4% during compressive deformation. This light Al-based alloy with good GFA and mechanical properties is promising as a new high specific strength material with good deformability.     

Upright-standing ZnO nano-sheets growth using wet chemistry

Room temperature solution processing is used for cross-linked upright-standing ZnO nano-sheets growth of ∼2–5 μm in length and ∼100–150 nm in width. These nano-sheets are characterized for structural and surface morphological analyses. Energy dispersive X-ray spectrum is preferred to chemical analysis. Confirmation of well defined, cross-linked and distinct ZnO nano-sheets of quoted dimensions is carried out using a scanning electron microscopy. Porous nature of nano-sheets with fine edge boundaries is noted from low resolution transmission electron microscopy.     

Mechanical properties of bulk carbon nanomaterials

Bulk carbon nanomaterials, which open prospects for the development of a new generation of supercapacitors, are actively investigated for recent years, but their mechanical properties and structure remain poorly understood. In connection with this fact, the influence of the hydrostatic and uniaxial compression on mechanical properties and structure of three bulk nanomaterials consisting of (i) bent graphene flakes, (ii) short carbon nanotubes, and (iii) fullerenes C₂₄₀ are investigated by the molecular dynamics method. It is shown that the strength of the material and its stability to graphitization depend on its constituent structural units. At large degrees of deformation, the material consisting of bent graphene sheets has the highest strength, whereas at the material density lower than 2.5 g/cm³, the highest strength is observed in the nanomaterial consisting of fullerene molecules. The differences in mechanical properties of the materials under consideration are explained by their structural features.     

Modification of nanosized natural montmorillonite for ultrasound-enhanced adsorption of Acid Red 17

This work aims to modify montmorillonite (MMT) via dodecyltrimethylammonium bromide (DTMA) and investigate its ability in ultrasound (US) assisted decolorization of a polluted solution. BET surface area of MMT was increased from 19.76 to 42.57 m²/g and basal spacing of MMT structural layers was increased from 1.13 to 1.69 nm by DTMA modification. The application of DTMA–modified MMT (DTMA–MMT) and US for the decolorization of Acid Red 17 (AR17) showed that US could improve the ability of DTMA–MMT on decolorization of AR17 solution due to simultaneous adsorption and sonocatalysis. The ability of US assisted DTMA–MMT was slightly decreased with pH, the initial dye concentration and the presence of inorganic anions.     

Ultrastiff cubic TiO2 identified via first-principles calculations

The crystal structures and compressibilities of fluorite- and pyrite-structured TiO2 under varying hydrostatic pressures are calculated using gradient-corrected density functional as well as hybrid density functional-Hartree-Fock formulations. The results suggest that fluorite TiO2 is a highly incompressible solid with a large bulk modulus value (K(0) approximately 395 GPa), approaching that of ultrahard cotunnite TiO2 (K(0)=431 GPa). The bulk modulus obtained for pyrite TiO2 is considerably smaller (K(0) approximately 220-260 GPa), nonetheless larger than the value determined experimentally for cubic TiO2. Calculated shear modulus values indicate that fluorite TiO2 has the potential to be an ultrahard material, if it could be stabilized under ambient conditions.     

铽配合物——蒙脱土新型复合发光材料的插层组装、表征和发光性能

合成了铽的配合物[TbL] (ClO₄)₃(L: 2, 2, 2', 2'-四[N-苯基-N-苄基(乙酰胺)-2-氧甲基]丁醚), 通过离子交换反应将配离子[TbL]³⁺插层组装到蒙脱土(MMT)层板间, 制备出了新型复合发光材料 [TbL]³⁺-MMT．用元素分析、X射线衍射、傅氏变换红外光谱和紫外-可见光谱对材料进行了表征, 对其荧光性质进行了研究．结果表明, 复合发光材料保持了蒙脱土良好的层柱结构特征和[TbL]³⁺离子的笼状结构特征, [TbL]³⁺离子以单层形式分布于蒙脱土层板间．在紫外光激发下, 复合发光材料发出较强的绿色荧光, 其发射光谱与相应配合物的发射光谱相似．与相应纯配合物比较, 复合发光材料单位质量Tb³⁺的相对荧光强度、荧光单色性和光稳定性有显著改善, 其激发波长向可见光区发生明显位移, 说明插层组装对相应配合物的激发波长有一定的调制作用.     

Preparation, characterization and properties of amino-functionalized montmorillonite and composite layer-by-layer assembly with inorganic nanosheets

An amino-functionalized montmorillonite (APTMS-MMT) was prepared by the grafting of 3-aminopropyltrimethoxysilane (APTMS) on the surface of MMT via the ultrasonic synthesis process and characterized by a variety of techniques: FT-IR, thermogravimetic analysis (TGA), particles size analysis and ζ-potential measurement. The results showed the size and size distribution of APTMS-MMT particles were decreased, and the ζ-potential of particles was increased obviously via the ultrasonic synthesis process. The particles of 30% APTMS-MMT_US (MMT modified with 30 wt% APTMS with ultrasonic synthesis process) had a z-average diameter of about 500 nm and a polydispersity index of 0.2. The resultant 30% APTMS-MMT_US was dispersed uniformly and stably in water. The poly(acrylic acid) (PAA)/APTMS-MMT multilayer films were grown through layer-by-layer (LBL) deposition of PAA and APTMS-MMT. SEM results indicated that the ultrasonic synthesis of APTMS-MMT increased dispersability of clay sheets at high loadings. The thermal stability and mechanical properties of PAA/APTMS-MMT composites were investigated by TGA and tensile test respectively. The results showed the ultrasonic synthesis of APTMS-MMT enhanced the thermal stability and mechanical properties of PAA/APTMS-MMT composites significantly. PAA/30% APTMS-MMT_US composite displayed 3 times higher strength and 6 times higher Young's modulus when compared with pure PAA polymer.