Non-Darcy buoyancy driven flows in a fluid saturated porous medium: the use of asymptotic computational fluid dynamics (ACFD) approach

Natural convection in a fluid saturated porous medium has been numerically investigated using a generalized non-Darcy approach. The governing equations are solved by using Finite Volume approach. First order upwind scheme is employed for convective formulation and SIMPLE algorithm for pressure velocity coupling. Numerical results are presented to study the influence of parameters such as Rayleigh number (10⁶ ≤Ra ≤10⁸), Darcy number (10⁻⁵ ≤ Da ≤ 10⁻²), porosity (0.4 ≤ ɛ ≤ 0.9) and Prandtl number (0.01 ≤ Pr ≤ 10) on the flow behavior and heat transfer. By combining the method of matched asymptotic expansions with computational fluid dynamics (CFD), so called asymptotic computational fluid dynamics (ACFD) technique has been employed to generate correlation for average Nusselt number. The technique is found to be an attractive option for generating correlation and also in the analysis of natural convection in porous medium over a fairly wide range of parameters with fewer simulations for numerical solutions.     

Heat transfer by laminar flow in a vertical and horizontal pipe with twisted-tape inserts

 This article presents the results of laboratory research on heat exchange while heating water in horizontal and vertical tubes with twisted-tape inserts. The scope of the research: 70 ≤ Re ≤ 4000 3.6 ≤ Pr ≤ 5.9 8.6 ≤ Gz ≤ 540 The research was held for three cases: – horizontal experimental tube – vertical experimental tube, the direction of flow according to the free convection vector – vertical experimental tube, the direction of flow not in accordance with the free convection vector For such cases the correlation equation was defined Nu_T=f(Gz; y), Nu = f(Gz) and the proportion Nu_T/Nu was analysed. Received on 30 March 2000     

Numerical investigation of natural convection of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanofluid in vertical annuli

This paper presents the numerical study of internal free convection of Al₂O₃ water nanofluid in vertical annuli. Vertical walls are maintained at constant temperatures and horizontal walls are adiabatic. Results are validated by experimental data. Effect of nanofluids on natural convection is investigated as a function of geometrical and physical parameters and particle fractions for aspect ratio of 1 ≤ H/L ≤ 5, Grashof number of 10³ ≤ Gr ≤ 10⁵ and concentration of 0 ≤ ϕ ≤ 0.06. More than 330 different numerical cases are investigated to develop a new correlation for the Nusselt number. This correlation is presented as a function of Nusselt number of base fluid and particle fraction which is a linear decreasing function of particle fraction. The developed correlation for annuli is also valid for the natural convection of Al₂O₃ water nanofluid in a square cavity. Furthermore, the effect of the viscosity and conductivity models on the Nusselt number of nanofluids in cylindrical cavities are discussed.     

Lattice Boltzmann simulation of heat transfer and fluid flow in a microchannel with nanofluids

Mathematical modeling is performed to simulate forced convection flow of 47 nm- Al₂O₃/water nanofluids in a microchannel using the lattice Boltzmann method (LBM). Single channel flow and conjugate heat transfer problem are taken into consideration and the heat transfer rate using a nanofluid is examined. Simulations are conducted at low Reynolds numbers (2 ≤ Re ≤ 16). The computed average Nusselt number, which is associated with the thermal conductivity of nanofluid, is in the range of 0.6 ￡ [`(Nu)] ￡ 13 0.6 \le \overline{Nu} \le 13 . Results indicate that the average Nusselt number increases with the increase of Reynolds number and particle volume concentration. The fluid temperature distribution is more uniform with the use of nanofluid than that of pure water. Furthermore, great deviations of computed Nusselt numbers using different models associated with the physical properties of a nanofluid are revealed. The results of LBM agree well with the classical CFD method for predictions of flow and heat transfer in a single channel and a microchannel heat sink concerning the conjugate heat transfer problem, and consequently LBM is robust and promising for practical applications.     

Average and extremal properties of heat transfer and shear stress on a wall surface in Rayleigh–Bénard convection

In this study surface-averaged and extremal properties of heat transfer and shear stress on the upper wall surface of Rayleigh–Bénard convection are numerically examined. The Prandtl number was raised up to 10³, and the Rayleigh number was changed between 10⁴ and 10⁷. As a result, average Nusselt number Nu and shear rate τ/Pr depends on Pr, Ra, and the entire numerical results are distributed between two correlation equations corresponding to small and large Pr. The small and large Pr equations are closely related to steady and unsteady flow regimes, respectively. Nevertheless, a single relation τ/Pr ~ Nu ^3.0 exists to explain the entire results. Similarly the change of local maximal properties Nu _max and τ _max/Pr depends on Pr, Ra, and these values are also distributed between two correlation equations corresponding to small and large Pr cases. Despite such complicated dependence we can obtain a correlation equation as a form of τ _max/Pr ~ Nu _max^2.6, which has not been obtained theoretically.     

A numerical study of the steady forced convection heat transfer from an unconfined circular cylinder

Forced convection heat transfer from an unconfined circular cylinder in the steady cross-flow regime has been studied using a finite volume method (FVM) implemented on a Cartesian grid system in the range as 10 ≤ Re ≤ 45 and 0.7 ≤ Pr ≤ 400. The numerical results are used to develop simple correlations for Nusselt number as a function of the pertinent dimensionless variables. In addition to average Nusselt number, the effects of Re, Pr and thermal boundary conditions on the temperature field near the cylinder and on the local Nusselt number distributions have also been presented to provide further physical insights into the nature of the flow. The rate of heat transfer increases with an increase in the Reynolds and/or Prandtl numbers. The uniform heat flux condition always shows higher value of heat transfer coefficient than the constant wall temperature at the surface of the cylinder for the same Reynolds and Prandtl numbers. The maximum difference between the two values is around 15–20%.     

Radiation effect on mixed convection over an isothermal cone in porous media

The radiation effect on the mixed convection flow of an optically dense viscous fluid adjacent to an isothermal cone embedded in a saturated porous medium with Rosseland diffusion approximation is numerically investigated. The entire regime of the mixed convection is included, as the mixed convection parameter of χ varies from 0 (pure free convection) to 1 (pure forced convection). The transformed nonlinear system of equations is solved by using an implicit finite difference method. Numerical results are given for the dimensionless temperature profiles and the local Nusselt number for various values of the mixed convection parameter χ, the cone angle parameter m, the radiation-conduction parameter R _d and the surface temperature parameter H. The local Nusselt number decreases initially, reaches a minimum in the intermediate value of χ and then increases gradually. It is apparent that increasing the cone angle parameter m enhances the local Nusselt number. The local Nusselt number is significantly increased for the large values of the radiation-conduction parameter R _d and the surface temperature parameter H, i.e., radiation effect becomes pronounced. Received on 25 October 1999     

Nusselt-Rayleigh correlations for free convection in 2D air-filled parallelogrammic enclosures with isothermal active walls

In the present study Nu-Ra-α correlations are proposed to calculate the steady-state natural convection heat transfer taking place in 2D air-filled cavities of parallelogrammic section. The thermal conditions and the dimensions of the enclosures permit to cover a large range of Rayleigh numbers, 1.7 × 10³  ≤ Ra ≤ 3.0 × 10⁹, suitable for diverse engineering applications. The two active walls of the cavities are kept vertical and isothermal at hot and cold temperatures T _h and T _c respectively. Separated by a horizontal distance H, they have the same height H and are connected by a closed adiabatic channel whose upper and lower walls can be inclined at an angle α with respect to the horizontal, varying between −60° to +60°. That gives rise to a conducting or insulating cavity, in the convective sense of the term (diode cavity). A computational model based on the finite volume method is used to solve the governing equations. The large number of treated configurations led to propose Nu-Ra-α correlations for large ranges of Ra and α which can be applied to many engineering areas. The results of this numerical study have been successfully compared with calculated and measured available data.     

Effects of solid and slotted baffles on the convection characteristics of backward-facing step flow in a channel

This study investigates the enhancement of the laminar forced convection characteristics of backward-facing step flow in a two-dimensional channel through the installation of solid and slotted baffles onto the channel wall. The effects of the height of baffle H _b, inclination of baffle installation ϕ_b, height of slot in baffle H _t, inclination of slot in baffle ϕ_t, and distance between the backward-facing step and baffle D on the flow structure, temperature distribution and Nusselt number variation for the system at various Re are numerically explored. Results show that a slotted baffle can enhance the average Nusselt number for the heating section of channel plate by the maximum 190% when Pr=0.7, H _s=0.5, L=5, H _b ≤ 0.3, W _b ≤ 0.2, 0.1 ≤ D ≤ 0.5, 0° ≤ ϕ_b ≤ 45°, H _t ≤ 0.1, 0° ≤ ϕ_t ≤ 45° and 50 ≤ Re ≤ 400. As for the solid baffle, the enhancement may be up by 230%. The solid baffle might cause the re-separation of main stream, and consequently result in poor local heat transfer coefficient in the end region of heating section. This disadvantage can be obviously improved as the baffle is slotted. Besides the penalty of increase in pressure drop due to the baffle installation is much higher for the situation with solid baffle.     

Non-Darcian and Anisotropic Effects on Free Convection in a Porous Enclosure

The free convective flow and heat transfer, within the framework of Boussinesq approximation, in an anisotropic fluid filled porous rectangular enclosure subjected to end-to-end temperature difference have been investigated using Brinkman extended non-Darcy flow model. The studies involve simultaneous consideration of hydrodynamic and thermal anisotropy. The flow and temperature fields in general are governed by, Ra, the Rayleigh number, AR, the aspect ratio of the slab, K*, the permeability ratio and k*, the thermal conductivity ratio, and Da, Darcy number. Numerical solutions employing the successive accelerated replacement (SAR) scheme have been obtained for 100 ≤ Ra ≤ 1000, 0.5 ≤ AR ≤ 5, 0.5 ≤ K* ≤ 5, 0.5 ≤ k* ≤ 5, and 0 ≤ Da ≤ 0.1. It has been found that [`(Nu)]{\overline {Nu}}, average Nusselt number increases with increase in K* and decreases as k* increases. However, the magnitude of the change in [`(Nu)]{\overline {Nu}} depends on the parameter Da, characterizing the Brinkman extended non-Darcy flow.     

Interaction of turbulent natural convection and surface thermal radiation in inclined square enclosures

Two-dimensional numerical studies of flow and temperature fields for turbulent natural convection and surface radiation in inclined differentially heated enclosures are performed. Investigations are carried out over a wide range of Rayleigh numbers from 10⁸ to 10¹², with the angle of inclination varying between 0° and 90°. Turbulence is modeled with a novel variant of the k–ε closure model. The predicted results are validated against experimental and numerical results reported in literature. The effect of the inclination of the enclosure on pure turbulent natural convection and the latter’s interaction with surface radiation are brought out. Profiles of turbulent kinetic energy and effective viscosity are studied to observe the net effect on the intensity of turbulence caused by the interaction of natural convection and surface radiation. The variations of local Nusselt number and average Nusselt number are presented for various inclination angles. Marked change in the convective Nusselt number is found with the orientation of enclosure. Also analyzed is the influence of change in emissivity on the flow and heat transfer. A correlation relevant to practical applications in the form of average Nusselt number, as a function of Rayleigh number, Ra, radiation convection parameter, N _RC and inclination angle of the enclosure, φ is proposed.     

Convection in a Lid-Driven Heat-Generating Porous Cavity with Alternative Thermal Boundary Conditions

Mixed convection flow in a two-sided lid-driven cavity filled with heat-generating porous medium is numerically investigated. The top and bottom walls are moving in opposite directions at different temperatures, while the side vertical walls are considered adiabatic. The governing equations are solved using the finite-volume method with the SIMPLE algorithm. The numerical procedure adopted in this study yields a consistent performance over a wide range of parameters that were 10⁻⁴ ≤ Da ≤ 10⁻¹ and 0 ≤ Ra _I ≤ 10⁴. The effects of the parameters involved on the heat transfer characteristics are studied in detail. It is found that the variation of the average Nusselt number is non-linear for increasing values of the Darcy number with uniform or non-uniform heating condition.     

Influence of inclination angle on buoyancy-driven convection in triangular enclosure filled with a fluid-saturated porous medium

The present investigation deals with the numerical analysis of steady-state laminar buoyancy-driven convection in an inclined triangular enclosure filled with fluid saturated porous media using the Darcy law equation. One wall of the enclosure is isothermally heated and the other is cooled, while the remaining wall is adiabatic. The effect of inclination angle on natural convection is investigated by varying the angle of inclination (φ) between 0° and 360°. The governing transformed equations are solved numerically using a finite-difference method. Obtained results are shown in the form of streamlines, isotherms, mean Nusselt numbers and dimensionless stream function for different values of the Rayleigh number Ra in the range 100 ≤ Ra ≤ 1,000. It is found that the values of the maximum and minimum mean Nusselt number are reached for φ = 330° and φ = 210° , respectively. However, the lowest flow strength is formed at φ = 240° for all values of Ra.     

Heat transfer and flow behavior around four staggered elliptic cylinders in cross flow

Experimental and numerical studies were carried out to investigate forced convection heat transfer and flow features around the downstream elliptic cylinder in four staggered cylinders in cross flow. The elliptic cylinders examined had an axis ratio (b/c) of 1:2, and they were arranged with zero angle of attack to the upstream flow. The present heat transfer measurements were obtained by heating only the downstream elliptic cylinder (test cylinder) under the condition of constant heat flux. The testing fluid was air and the Reynolds number based on the major axis length (c) was ranged from 4,000 to 45,570. The tested longitudinal spacing ratio (S_x/c) and the transversal spacing ratio (S_y/b) were in the ranges of 1.5 ≤ S_x/c ≤ 4.0 and 1.5 ≤ S_y/b ≤ 4.0, respectively. The air flow pattern and temperature fields around the four staggered elliptic cylinders were predicted by using CFD software package. Also, a flow visualization study was made to show the flow features around the elliptic cylinders. It was observed that Nu_m of the downstream elliptic cylinder in four staggered cylinders was higher than that of three in-line cylinders for all tested spacing ratios and Reynolds numbers except for Re = 4,000. It was clear that, at lower Reynolds number values (Re < 14,100), the average Nusselt number of the downstream elliptic cylinder in three staggered arrangement was higher than that of the downstream cylinder in four staggered arrangement for all tested spacing ratios. On the other hand, at Re > 14,100, the tested elliptic cylinder in four staggered arrangement had the higher values of the average Nusselt number. Moreover, in four staggered arrangement, the maximum average Nusselt number enhancement ratio (average Nusselt number of the tested downstream cylinder/average Nusselt number of a single elliptic cylinder) was found to be about 2.0, and was obtained for spacing ratios of S_x/c = 2.5, S_y/b = 2.5 and at Re = 32,000. Finally, the average Nusselt number of the tested cylinder in four staggered arrangement was correlated in terms of Reynolds number and cylinder spacing ratios.     

Momentum and heat transfer from an asymmetrically confined circular cylinder in a plane channel

Unsteady momentum and heat transfer from an asymmetrically confined circular cylinder in a plane channel is numerically investigated using FLUENT for the ranges of Reynolds numbers as 10≤Re≤500, of the blockage ratio as 0.1≤β≤0.4, and of the gap ratio as 0.125≤γ≤1 for a constant value of the Prandtl number of 0.744. The transition of the flow from steady to unsteady (characterized by critical Re) is determined as a function of γ and β. The effect of γ on the mean drag and lift coefficients, Strouhal number (St), and Nusselt number (Nu _w ) is studied. Critical Re was found to increase with decreasing γ for all values of β. and St were found to increase with decreasing values of γ for fixed β and Re. The effect of decrease in γ on was found to be negligible for all blockage ratios investigated.     

Numerical study of transient laminar natural convection heat transfer over a sphere subjected to a constant heat flux

Transient laminar natural convection over a sphere which is subjected to a constant heat flux has been studied numerically for high Grashof numbers (10⁵ ≤ Gr ≤ 10⁹) and a wide range of Prandtl numbers (Pr = 0.02, 0.7, 7, and 100). A plume with a mushroom-shaped cap forms above the sphere and drifts upward continuously with time. The size and the level of temperature of the transient cap and plume stem decrease with increasing Gr and Pr. Flow separation and an associated vortex may appear in the wake of the sphere depending on the magnitude of Gr and Pr. A recirculation vortex which appears and grows until “steady state” is attained was found only for the very high Grashof numbers (10⁵ ≤ Gr ≤ 10⁹) and the lowest Prandtl number considered (Pr = 0.02). The appearance and subsequent disappearance of a vortex was observed for Gr = 10⁹ and Pr = 0.7. Over the lower hemisphere, the thickness of both the hydrodynamic (δ_H) and the thermal (δ_T) boundary layers remain nearly constant and the sphere surface is nearly isothermal. The surface temperature presents a local maximum in the wake of the sphere whenever a vortex is established in the wake of the sphere. The surface pressure recovery in the wake of the sphere increases with decreasing Pr and with increasing Gr. For very small Pr, unlike forced convection, the ratio δ_T/δ_H remains close to unity. The results are in good agreement with experimental data and in excellent agreement with numerical results available in the literature. A correlation has also been presented for the overall Nusselt number as a function of Gr and Pr.     

Effect of Conduction in Bottom Wall on Darcy–Bénard Convection in a Porous Enclosure

Conjugate natural convection-conduction heat transfer in a square porous enclosure with a finite-wall thickness is studied numerically in this article. The bottom wall is heated and the upper wall is cooled while the verticals walls are kept adiabatic. The Darcy model is used in the mathematical formulation for the porous layer and the COMSOL Multiphysics software is applied to solve the dimensionless governing equations. The governing parameters considered are the Rayleigh number (100 ≤ Ra ≤ 1000), the wall to porous thermal conductivity ratio (0.44 ≤ K _r ≤ 9.90) and the ratio of wall thickness to its height (0.02 ≤ D ≤ 0.4). The results are presented to show the effect of these parameters on the heat transfer and fluid flow characteristics. It is found that the number of contrarotative cells and the strength circulation of each cell can be controlled by the thickness of the bottom wall, the thermal conductivity ratio and the Rayleigh number. It is also observed that increasing either the Rayleigh number or the thermal conductivity ratio or both, and decreasing the thickness of the bounded wall can increase the average Nusselt number for the porous enclosure.     

Nonsimilarity solutions for non-Darcy mixed convection from horizontal surfaces in a porous medium

Non-Darcy mixed convection in a porous medium from horizontal surfaces with variable surface heat flux of the power-law distribution is analyzed. The entire mixed convection regime is divided into two regions. The first region covers the forced convection dominated regime where the dimensionless parameter ζ _f =Ra^* _x /Pe² _x is found to characterize the effect of buoyancy forces on the forced convection with K ^′ U _∞/ν characterizing the effect of inertia resistance. The second region covers the natural convection dominated regime where the dimensionless parameter ζ _n =Pe _x /Ra^*1/2 _x is found to characterize the effect of the forced flow on the natural convection, with (K ^′ U _∞/ν)Ra^*1/2 _x /Pe _x characterizing the effect of inertia resistance. To obtain the solution that covers the entire mixed convection regime the solution of the first regime is carried out for ζ _f =0, the pure forced convection limit, to ζ _f =1 and the solution of the second is carried out for ζ _n =0, the pure natural convection limit, to ζ _n =1. The two solutions meet and match at ζ _f =ζ _n =1, and R ^* _h =G ^* _h . Also a non-Darcy model was used to analyze mixed convection in a porous medium from horizontal surfaces with variable wall temperature of the power-law form. The entire mixed convection regime is divided into two regions. The first region covers the forced convection dominated regime where the dimensionless parameter ξ _f =Ra _x /Pe _x ^3/2 is found to measure the buoyancy effects on mixed convection with Da _x Pe _x /ɛ as the wall effects. The second region covers the natural convection dominated region where ξ _n =Pe _x /Ra _x ^2/3 is found to measure the force effects on mixed convection with Da _x Ra _x ^2/3/ɛ as the wall effects. Numerical results for different inertia, wall, variable surface heat flux and variable wall temperature exponents are presented. Received on 8 July 1996     

Friction and forced convective heat transfer in a sintered porous channel with obstacle blocks

This work experimentally studies the flow characteristics and forced convective heat transfer in a sintered porous channel that filled with sintered copper beads of three average diameters ( 0.830, and 1.163 mm). The pressure drop and the local temperature measurements can be applied to figure out the distributions of the friction coefficient and the heat transfer coefficient. Three sintered porous channels differ in the arrangement of obstacle blocks. Model A has no obstacle. Models B and C have five obstacle blocks facing down and up, respectively, in a sintered porous channel. The range of experimental parameters, porosity, heat flux, and effect of forced convection are 0.370 ≤ ɛ ≤ 0.385, q=0.228, 0.872, 1.862 W/cm², and 200 ≤ Re _d ≤ 800. The permeability and inertia coefficient of each of the three sintered porous channels are analyzed. The results for Model A agree with those obtained by previous investigations in C _f distribution. The heat transfer of Model C exceeds that of Model A by approximately 20%. Finally, a series of empirical correlation equations were obtained for practical applications and engineering problems.     

Opposing mixed convection and its interaction with radiation inside eccentric horizontal cylindrical annulus

In the present investigation, the coupled phenomenon of opposing mixed convection and radiation within differentially heated eccentric horizontal cylindrical annulus has been numerically simulated. The radiation transfer contributed from the participating medium is obtained by solving the nonlinear integro‐differential radiative transfer equation using discrete ordinate method. The participating gray medium is considered to be emitting, absorbing and isotropically scattering. The walls of the annulus are considered to be opaque, diffuse and gray. In the study it has been observed that the Richardson number ‘Ri’ has a small effect on the total Nusselt number ‘Nu’ in mixed convection heat transfer with or without radiation. From the present investigation it is found that substantial changes occur in isotherms as well as in flow patterns, when the Richardson number is allowed to vary in the range of 0.01–1. The influence of radiative parameters on the interaction phenomenon has been delineated through isotherm and streamline pattern. Copyright © 2008 John Wiley & Sons, Ltd.