过渡金属催化不饱和烃与二氧化碳的羧化反应研究与进展

CO₂是一种无毒、廉价易得、储量丰富的可再生资源,通过化学方法将其转化为具有高附加值的化学品已成为实现可持续发展的战略性课题。其中,以CO₂作为羧化试剂合成羧酸及其衍生物的研究已成为CO₂催化活化领域的研究热点。本文按照不同过渡金属催化的不饱和烃与CO₂的羧化反应,分类归纳了近些年来的羧化反应研究进展。     

CO2 anion-radical in organic carboxylations

This letter shows a first approximation to the use of CO₂ anion-radical in the obtention of α-methyl and α-ethylcyanoacetic acids from propionitrile and butyronitrile, respectively, through a paired electrochemical reaction with CO₂. The electrosynthesis of α-chloro-phenylacetic acid from benzyl chloride and phenylacetic acid from toluene by another proposed pathway is also discussed.     

氮杂环卡宾催化二氧化碳羧化反应的研究进展

二氧化碳是一种来源丰富的可再生资源,科研工作者一直致力于开发能够高效转化二氧化碳的催化体系。氮杂环卡宾在有机化学中是一类非常重要的催化剂,利用氮杂环卡宾-过渡金属配合物催化实现二氧化碳的高效化学转化受到了人们的广泛关注。本文主要根据氮杂环卡宾-过渡金属配合物进行分类,总结归纳了近年来氮杂环卡宾-过渡金属配合物催化二氧化碳羧化反应的研究进展。     

可见光促进二氧化碳参与的羧基化反应

二氧化碳是众所周知的温室气体, 也是重要的C1资源, 利用二氧化碳合成高附加值化合物具有重要意义. 其中, 羧酸类化合物广泛存在于天然产物、 药物、 日化品及工业原料中, 是一类非常重要的化合物. 因此, 利用二氧化碳合成羧酸类化合物是一个重要的研究方向; 另一方面, 由于二氧化碳反应活性低, 其转化通常需要高温等苛刻条件. 为解决该问题, 人们利用可见光作为能量来源, 可以在温和条件下实现二氧化碳的高效转化. 鉴于该方向近年来的蓬勃发展, 本文主要对可见光促进二氧化碳参与的羧基化反应进行介绍和总结, 按烯烃、 炔烃、 醛酮、 亚胺和(类)卤代物等重要的化工原料分类阐述, 并将各个反应的特点和机理将作为阐述的重点. 本文也对该领域的未来发展方向进行了展望, 希望为该领域的进一步发展提供参考.     

Reductive carboxylation of alkyl halides with CO2 by use of photoinduced SmI2/Sm reduction system

Upon visible-light irradiation, reductive carboxylation of alkyl halides takes place by using a SmI₂/Sm mixed system under atmospheric CO₂ to afford the corresponding carboxylic acids in good to excellent yields.     

Photochemistry of perfluoroacyl halides in the presence of O2 and CO

Photolyses of CF₃C(O)X and C₂F₅C(O)X (X=Cl, F) at 254 nm in the presence of O₂ yield the perfluorinated radicals C₂F₅O (C₂) and CF₃O (C₁), respectively. The C₂ radicals decompose to give CF₃ radicals:

C₂F₅O→CF₃+CF₂O

which, in turn, react with O₂ leading to the formation of C₁ radicals. When in addition to O₂, CO is present, the C₁ radicals react with it leading to its catalytic oxidation to CO₂. The trioxide CF₃OC(O)O₃C(O)OCF₃ was observed following the photolysis of all four halides in the presence of O₂ and CO.

The other radical partners coming from the initial step in the photolysis (XC(O)) as well as the products of their reaction with O₂ (XC(O)O_y, y=1, 2) do not react with CO but when X=F they lead to the formation of a new stable peroxy molecule with the formula CF₃OC(O)O₂C(O)F. Some of the properties of this new molecule, its stability and its IR features are presented in this work.     

Non-catalytic pyrolysis of ethane to ethylene in the presence of CO2 with or without limited O2

Influence of the presence of CO₂, which is a mild oxidant, on the performance of the thermal cracking of ethane to ethylene in the absence or presence of limited O₂ at different temperatures (750–900‡C), space velocities (1500–9000 h^-1) and CO₂/C₂H₆ and O₂/C₂H₆ mole ratios (0–2.0 and 0–0.3 respectively) has been investigated. In both the presence and absence of limited O₂, ethane conversion increases markedly because of the presence of CO₂, indicating its beneficial effect on the ethane to ethylene cracking. The increased ethane conversion is, however, not due to the oxidation of ethane to ethylene by CO₂; the formation of carbon monoxide in the presence of CO₂ is found to be very small. It is most probably due to the activation of ethane in the presence of CO₂.     

Butyl lithium (BuLi)-mediated carboxylation of vinylidenecyclopropanes with CO2

A novel butyl lithium (ⁿBuLi)-mediated carboxylation of vinylidenecyclopropanes with CO₂ in THF at −78 °C followed by the further transformation has been realized to afford the corresponding carboxylic adducts in moderate to good yields under normal conditions. The scope and limitations as well as the plausible reaction mechanism have been also discussed in this paper.     

InBr3/Cu(OTf)2-catalyzed C-alkylation of pyrroles and indoles with α-diazocarbonyl compounds

Pyrroles and indoles react smoothly with α-diazocarbonyl compounds in the presence of 10 mol% of InBr₃ under mild conditions to afford the corresponding 2- and 3-alkyl pyrrole and 3-alkyl indole derivatives, respectively, in good yields with high selectivity.     

Et3B-Mediated radical alkylation of pyrroles and indoles

An efficient Et₃B-mediated oxidative radical substitution of substituted pyrroles and indoles using xanthate based radical chemistry in the presence of iron(II) sulfate is described. Unsubstituted indole gave only low yield or failed in the process. 2-Cyanofuran and 2-benzoylthiophene did not afford the corresponding alkylated products under these conditions.     

CO/H2 and CO2/H2 reactions with amorphous carbon-metal catalysts

By metal impregnation of selected naturally occurring organic materials followed by controlled carbonization, metal semicoke catalysts can be readily prepared. These catalysts have been tested in the synthesis of hydrocarbons and alcohols from CO/H₂ and CO₂/H₂ mixtures. Fe and Co preparations have been used. Relatively high temperatures are required when using these catalysts, which are quite active for synthesis using CO₂ and H₂. The pressure (5150 kPa) is very favorable both for the synthesis of liquid hydrocarbons (C₅–C₃₀) and alcohols (C₁–C₅).

---

. CO/H₂ CO₂/H₂. Fe Co. , CO₂ H₂. 5150 ) (C₅–C₃₀) (C₁–C₅).

     

TiO2纳米管阵列覆盖Si薄膜光催化还原CO2性能的研究

本工作采用CVD法在阳极氧化TiO2纳米管阵列膜表面沉积一层非晶Si膜,通过退火后得到晶化了的Si膜/TiO2纳米管阵列的复合结构,并初步就其光催化还原CO2制备碳氢化合物的活性进行研究。拉曼光谱(Raman)、X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、高分辨透射电子显微镜(TEM)等微结构表征结果表明所制备的TiO2纳米管阵列的厚度为270 nm左右,管直径约为70 nm,管壁厚度约为16 nm。覆盖的Si膜已晶化,其厚度约为300 nm。通过高效液相色谱(HPLC)及总有机碳(TOC)来检测光催化还原液相产物中的甲酸及总有机碳含量,发现负载Si膜后的TiO2纳米管阵列光催化性能有所提高,在装有400cut滤光片氙灯照射2 h下TOC含量从21.2 mg.L-1增长到29.5 mg.L-1,表明Si与TiO2的复合可有效的提高光催化还原CO2的活性,这可能与该异质结结构可增加对光的吸收并且可降低光生空穴-电子对复合有关。光催化循环实验表明所制得的催化剂在循环5次后仍可保持91.6%的催化活性。     

Hydrogenation of CO2

The hydrogenation of CO₂ has been studied on three different series of catalysts: Fe/MgO, Ni/Ti, Cr/Zn doped with potassium. Reaction was carried out in a conventional flow microreactor system at 15 bar at 250–350°C. Three independent competing reactions: Reverse gas-water shift (RGWS), Fischer-Tropsch (FT) and methanol synthesis were observed.

---

CO₂ : Fe/MgO, Ni/Ti, Cr/Zn . 15 250–350°C. : RGWS, F.T. .

     

CO2在纳米SiO2/TiO2悬浮体系中的光催化还原

用水热法合成了氧化硅改性的具有高比表面积、高催化活性的锐钛型二氧化钛, 并在其悬浮体系中将CO₂光催化还原合成甲醇. 采用XRD, TEM, 物理吸附, UV-Vis吸收光谱和FTIR等表征手段对催化剂结构特征进行了研究. 结果表明: 添加氧化硅后, 氧化硅和二氧化钛之间形成Si—O—Ti键, 抑制了TiO₂晶粒生长, 提高了锐钛型TiO₂的比表面积, 且随着含硅量的增加, SiO₂/TiO₂的UV吸收逐步蓝移, 禁带宽度增加. 还原反应结果表明: SiO₂/TiO₂具有光催化还原活性, 且随着含硅量的增加先增加后减小, 当SiO₂质量分数为3.5%时, SiO₂/TiO₂复合催化剂反应活性最强, 5 h内甲醇产量可达到21.0 mg/L, 并有少量甲醛生成.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

The reaction of (SO2)2 and (CO2)2 with Ba

The reactions of (CO₂)₂ and (SO₂)₂ with Ba have been investigated using a crossed beam arrangement and the laser-induced fluorescence technique. Internal energy in the BaO product was probed in order to study differences between monomeric and dimeric reactions. The reaction cross section for the dimers of CO₂ was found to be between four and eightfold larger than that of the monomers. This can be explained by the change in the reaction mechanism due to the positive electron affinity of the dimers versus the negative electron affinity of the monomers. The product BaO from the dimeric reactions is much colder rotationally than in the monomeric case. This phenomenon can be explained based on the kinematics.     

Improvement of stability of a Fe/Mg/Al2O3 catalyst for the decomposition of methane in the presence of O2/CO2

The stability of an Fe/Al₂O₃ catalyst in the methane decomposition in the presence of O₂/CO₂ was found to be improved by the addition of Mg into the catalyst (Mg/Fe=1/1 wt ratio), probably due to suppression of carbon deposition even under CH₄/ O₂/CO₂ (80/10/5 vol. ratio) conditions. This revised version was published online in June 2006 with corrections to the Cover Date.     

Preparation of COF2 using CO2 and F2 in the electrochemical cell with PbSnF4 as a solid electrolyte

Tetragonal PbSnF₄ was prepared by precipitation method with Pb(NO₃)₂ and SnF₂ aqueous solutions. The product was characterized using X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XFS), and the other chemical analyses. Tetragonal PbSnF₄ exhibited the highest electric conductivity of 3.2 Sm⁻¹ at 473 K in air as a fluoride ion conductor. We have investigated the possibility of COF₂ formation using CO₂ and F₂ in an electrochemical cell with PbSnF₄ as a solid electrolyte. At same time, we tried to produce an electric power from an electrochemical cell. This CO₂/F₂ electrochemical cell was constructed with a tetragonal PbSnF₄ disk having Au electrodes. The electromotive force was about 0.9 V at room temperature for 0.1 MPa CO₂/(0.01 MPa F₂ + 0.09 MPa Ar). However, the short circuit current density was 0.24 A m⁻², which was quite small. This current density was so small that no fluorocarbon compound was detected after 3 h discharge using FT-IR.