Molecular hybrids of azobenzene polymer and liquid crystal molecule. A new approach for understanding the command surface system

Langmuir-Blodgett (LB) films consisting of the hybrid of a polymer having the azobenzene (Az) side chain and 4î-pentyl-4-cyanobiphenyl (5CB) are prepared. Microscopic observations and spectroscopic data both indicate that the Az side chain and 5CB are homogeneously mixed at a molecular level without phase separation in the layer. This provides a satisfactory model of the command surface system. Time course accumulation of spectroscopic data for multilayered hybrid films reveals the cooperative nature of the photo-motivated molecular motions.     

Porous and electrically conductive polypyrrole-poly(vinyl alcohol) composite and its applications as a biomaterial

Bulk modification of polypyrrole (PPY) with poly(vinyl alcohol) (PVA) was carried out by the electropolymerization of pyrrole in the presence of PVA in the reaction solution, with tetraethylammonium perchlorate (TEAP) as the electrolyte. The surface morphology of the as-synthesized PPY-TEAP-PVA film was investigated using scanning electron microscopy, and the film was further characterized using X-ray photoelectron spectroscopy, electrical conductivity, the water contact angle, and BET surface area measurements. The PPY-TEAP-PVA composite is electrically conductive, hydrophilic, and microporous with a high surface area. Its potential as a biomaterial was investigated with respect to its blood compatibility and function as a substrate for biosensor fabrication and cell culture. The presence of PVA in the film attenuates blood protein adsorption, and the porous nature of the PPY-TEAP-PVA film results in a 10-fold increase in the amount of glucose oxidase covalently immobilized on the film over that on a nonporous PPY film. PC12 cell attachment and growth on the PPY-TEAP-PVA film was also shown to be enhanced compared with that on tissue culture polystyrene. The attached cells proliferated and formed a monolayer on the film surface after 48 h of seeding.     

Light Induced Electron Transfer and Charge Separation of Porphyrin Compounds for Photoelectric Conversion

A series of artificial photosynthesis porphyrin compounds consisting of electron donor and electron acceptor (compounds 1-6) were synthesized. Their spectroscopic behaviors in solution were investigated and the synthetic molecular devices were prepared with these molecules by using LB technique. It was indicated that multistep electron transfer and charge separation for these compounds actually occur, which is of great advantage to their photoelectric conversion. An efficient energy transfer process takes place for compound 6. A mechanism involving photoinduced electron transfer and multistep charge separation for these compounds was suggested. With only one monolayer of tetrad 1 LB film on the surface of Sn0₂ conductive glass, high photo-driven voltage and current were obtained.     

Ideal spread monolayer and multilayer formation of fully hydrophobic polythiophenes via liquid crystal hybridization on water

The spread monolayer formation of hydrophobic poly(3-alkylthiophene)s (P3ATs), regioregular poly(3-hexylthiophene) ( HT-P3HT), regioregular poly(3-dodecylthiophene) ( HT-P3DT), and regioirregular poly(3-hexylthiophene) ( RI-P3HT), were attained on the water surface via cospreading with a liquid-crystal molecule, 4'-pentyl-4-cyanobiphenyl (5CB). The spread monolayers were characterized by pi- A isotherms, Brewster angle microscopy (BAM), and atomic force microscopy (AFM). The molecular area for the cospread mixtures of P3ATs and 5CB expanded more than that of pure P3ATs as shown from the pi-A isotherms. BAM revealed that the mixed film forms the monomolecularly uniform and flat films on water. AFM elucidated that the spread monolayer of the hydrophobic P3ATs formed on the top of the 5CB monolayer on water with thicknesses of ca. 1.6 and ca. 2.6 nm for the two P3HTs and HT-P3DT, respectively. The P3AT/5CB hybrid monolayers could be fully transferred onto a solid substrate, and pure P3AT monolayers were obtained after volatilization of 5CB by gentle heating. The multilayer formation of pure P3AT monolayers was prepared by layer-by-layer deposition involving repeating horizontal deposition and successive volatilization of 5CB. Grazing angle incidence X-ray diffraction measurements showed that the lamella plane of the P3ATs is perfectly oriented parallel to the substrate plane in the resulting thin films. This shows a marked contrast with those obtained by spin casting using the identical polymer, where both in-plane and out-of-plane lamellae are involved. These thin films with perfectly controlled lamella orientation should be of great significance as the model system for evaluating the charge mobility for organic polymer electric devices.     

Photoinduced phase separation and miscibility in the condensed phase of a mixed Langmuir monolayer

We report our studies on the mixed Langmuir monolayer of mesogenic molecules, p-(ethoxy)-p-phenylazo phenyl hexanoate (EPPH) and octyl cyano biphenyl (8CB), employing the techniques of surface manometry and Brewster angle microscopy. Our studies show that the mixed monolayer exhibits higher collapse pressures for certain mole fractions of EPPH in 8CB as compared to individual monolayers. Also, a considerable reduction in the area per molecule is seen in the mixed monolayer, indicating a condensed phase. We have also studied the photostability of the mixed monolayer at different initial surface pressures. The mixed monolayer, under alternate cycles of UV and visible illumination, exhibits changes in surface pressures. This is due to the photoinduced transformation of EPPH isomers in the mixed monolayer. Our in-situ Brewster angle microscope studies for 0.5 mole fraction of EPPH in 8CB show a phase separation in the UV and a miscible phase in the visible, at low surface pressures ( approximately 5 mN/m). At higher surface pressures ( approximately 10 mN/m), under UV illumination, we find a phase separation which does not revert to a miscible phase under visible illumination.     

Charge separation from the bursting of bubbles on water

Film droplets formed from the bursting of 2.4 mm diameter bubbles on the surface of pure water are predominantly negatively charged. The charge generated per bubble varies chaotically; a few bubbles generate more than -3 × 10(6) elementary charges (e) but the vast majority generate much less. The average is -5 × 10(4)e/bubble, and it is not significantly affected by bubbling rate or temperature. The charge diminishes with increasing salt concentration and vanishes for concentrations above 10(-3) M. We propose a mechanism consistent with the observed charge separation. The model relies on the assumption that the surface of pure water has a slight excess of hydroxide ions. The charge separation results when water with entrained counterions (H(3)O(+)) flows out of the thinning film of the bubble cap, leaving behind the excess OH(-) on the surface. Addition of salt reduces the Debye length, and the charge separation mechanism becomes less effective as the Debye length becomes small compared with the film thickness. The excess charge near the surface of pure water is very small, around -4 nC/m(2).     

Preparation and characterization of monodisperse superparamagnetic poly(vinyl alcohol) beads by reverse spray suspension crosslinking

A novel protocol for preparing magnetic poly(vinyl alcohol) (PVA) beads by reverse spray suspension crosslinking was reported. The hydrophilic Fe₃O₄ nanoparticles were mixed with PVA, glutaraldehyde, and water to form aqueous phase. Then the aqueous phase was sprayed into vegetable oil by a pressure of nitrogen gas to form water in oil (W/O) suspension. The magnetic PVA beads were obtained in the presence of hydrochloric acid catalyst. It was found that the magnetic PVA beads obtained good properties when the PVA concentration was 10%, and the oil phase temperature was controlled at 40 °C. The mechanical stirring has little impact on the size of magnetic PVA beads in the process of reverse spray suspension crosslinking. The Cibacron Blue (CB) was coupled on the surface of magnetic PVA beads by surface chemical reaction. The morphology, size, and magnetic properties of the magnetic PVA beads were examined by scanning electron microscopy, laser diffraction, and vibrating sample magnetometer, respectively. Compared with the stirring method, it was found that the size of magnetic PVA beads was monodisperse and their saturation magnetization was much higher. Fourier transform infrared and X‐ray photoelectron spectroscopy experimental results proved that CB molecules were covalently immobilized onto the surface of the magnetic PVA beads. Meanwhile, the protein affinity separation experiments demonstrated that the magnetic PVA beads can potentially be used as a carrier for large‐scale protein separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 203–210, 2008     

Thermal and Photochemical Control of Molecular Orientation of Azo‐Functionalized Polymer Liquid Crystals and Application for Photo‐Rewritable Paper

A photo‐responsive multi‐bilayered film consisting of azobenzene polymer liquid crystals (PA6Az1) and poly(vinyl alcohol) (PVA) has been prepared on a glass substrate by alternate spin coating of the polymer solutions. The reflectivity of the multi‐bilayered film disappears by annealing at 80 °C. The disappearance of the reflection by the annealing is related to the thermal out‐of‐plane molecular orientation of PA6Az1 even in the multi‐bilayered film, which leads to a very small difference in refractive indices between PA6Az1 and PVA. The reflectance of the multi‐bilayered film is increased again by UV irradiation because of the transformation from the out‐of‐plane orientation to an in‐plane random orientation. In this way, on–off switching of the reflection is achieved by combination of the thermally spontaneous out‐of‐plane molecular orientation and following photoisomerization of PA6Az1 comprising the multi‐bilayered film.

     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.     

Association behavior of a nitrilotriacetic-acid-modified dye in a poly(vinyl alcohol) film containing Ni(II)-adsorbed gold nanoparticles.

The association behavior of the dyes 5(6)-carboxyfluorescein and nitrilotriacetic acid (NTA)-modified 5(6)-carboxyfluorescein (F-NTA) in a poly(vinyl alcohol) (PVA) film and in a PVA film containing metal nanoparticles is investigated. Well-dispersed gold nanoparticles (AuNps) and Ni(II)-adsorbed AuNps are formed in the PVA film using in situ photochemical fabrication method. 5(6)-carboxyfluorescein and F-NTA are doped into the films. The F-NTA forms an H-aggregate in the PVA film containing Ni(II)-adsorbed AuNps. It is suggested that the interaction between NTA and Ni(II) adsorbed on the AuNps promotes the formation of the H-aggregate.     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.     

Formation of a highly ordered dot array of surface micelles of a block copolymer via liquid crystal-hybridized self-assembly

A highly ordered dot array pattern of surface micelles on water is formed by a spread monolayer of an amphiphilic block copolymer, polystyrene-block-poly(4-vinylpyridine) (PS-4VP), via hybridization with a liquid crystal molecule, 4'-pentyl-4-cyanobiphenyl (5CB), on water. Simple co-spreading of PS-4VP with 5CB provides a flat homogeneous monolayer of PS-4VP on water without the aggregation of PS blocks. With increasing surface pressure, well-defined dots of the PS blocks start to grow and are arrayed in a highly ordered hexagonal structure. The exact coincidence of the surface pressure-area curves for the hybrid monolayer in the compression and expansion processes confirms that the flat spread monolayer and the dot array are formed on water in the equilibrium state by a self-assembly process.     

The effects of network structure on the resistance of silane coupling agent layers to water-assisted crack growth

Silane adhesion promoters are commonly used to improve the adhesion, durability, and corrosion resistance of polymer-oxide interfaces. The current study investigates a model interface consisting of the natural oxide of(100) Si and an epoxy cured from diglycidyl ether ofbisphenol A (DGEBA) and triethylenetetraamine (TETA). The thickness of (3-glycidoxypropyl)trimethoxysilane (GPS) films placed between the two materials provided the structural variable. Five surface treatments were investigated: a bare interface, a rough monolayer film, a smooth monolayer film, a 5 nm thick film, and a 10 nm thick film. Previous neutron reflection experiments revealed large extension ratios (>2) when the 5 and 10 nm thick GPS films were exposed to deuterated nitrobenzene vapor. Despite the larger extension ratio for the 5 nm thick film, the epoxy/Si fracture energy (Gc) was equal to that of the 10 nm thick film under ambient conditions. Even the smooth monolayer exhibited the same Gc. Only when the monolayer included a significant number of agglomerates did the Gc drop to levels closer to that of the bare interface. When immersed in water at room temperature for 1 week, the threshold energy release rate (Gth) was nearly equal to Gc for the smooth monolayer, 5 nm thick film, and 10 nm thick film. While the Gth for all three films decreased with increasing water temperature, the Gth of the smooth monolayer decreased more rapidly. The bare interface was similarly sensitive to temperature; however, the Gth of the rough monolayer did not change significantly as the temperature was raised. Despite the influence of pH on hydrolysis, the Gth was insensitive to the pH of the water for all surface treatments.     

Cucurbit[10]uril

Melamine diamine 1 is able to displace CB[5] from the CB[10].CB[5] complex resulting in CB[10].12 and precipitated CB[5].1. We were able to isolate free CB[10] by treatment of CB[10].1 with acetic anhydride followed by washing with MeOH, DMSO, and water. The spacious cavity of CB[10] is able to complex large guests, including a cationic calix[4]arene derivative in its 1,3-alternate form (CB[10].1,3-alt-3). The addition of adamantane carboxylic acid (4) to CB[10].3 triggers a conformational change during the formation of termolecular complex CB[10].cone-3.4.     

Non-covalent interactions of coumarin dyes with cucurbit[7]uril macrocycle: modulation of ICT to TICT state conversion

Non-covalent interaction of coumarin laser dyes, namely coumarin-1 (C1), coumarin-481 (C481) and coumarin-6H (C6H), with a versatile macrocyclic host molecule cucurbit[7]uril (CB7), has been investigated in aqueous solution using photophysical methods. Steady-state and time-resolved fluorescence studies illustrate significant enhancements/modifications in the fluorescence yields, lifetimes and spectral features of C1, C481 and C6H on interaction with CB7, and are assigned to 1 : 1 complex formation between the dyes and the CB7 host. The complex formation is mainly driven by charge-dipole interaction, as evident from the binding constant values (K ~ 10(4)-10(5) M(-1)). The large changes in the excited state behaviour of C1 and C481 as compared to C6H in the presence of CB7 indicate that CB7 binds C1 and C481 through the encapsulation of the 7-N,N'-diethylamino group of the dyes and the structural rigidity imposed by this interaction dramatically alters the excited state properties of the dyes by preventing the conversion of their emissive intramolecular charge transfer (ICT) state to the non-radiative twisted intramolecular charge transfer (TICT) state. The present results direct towards the probable supramolecular approach using water soluble macrocyclic CB7, in the development of aqueous dye laser systems in the blue-green region.     

葫［7］环联脲作为毛细管电泳分离介质的研究

以葫［7］环联脲(CB［7］)作为毛细管电泳添加剂,成功地分离了6种硝基苯类化合物。考察了pH值对电渗流的影响,初步评价了其基本的电泳性能,结果表明在所考察的pH值范围内(pH 2~6.5),葫［7］环联脲是质子化的,且吸附到毛细管内壁上,这使得毛细管内壁带上正电荷,电渗流反向;初步考察了葫［7］环联脲的浓度对分离的影响,证明了用葫［7］环联脲作为添加剂可完全分离对硝基乙苯、对硝基甲苯、对氯硝基苯、间二硝基苯、2,4-二硝基氯苯和硝基苯这6种物质,最佳的缓冲液为10 mmol/L Na2HPO4（用盐     

Abrupt interfacial transitions of hydrophobic polysilanes as probed via liquid crystal-assisted stepwise deposition

The Langmuir-Blodgett deposition was applied for the first time for fully hydrophobic polysilanes, poly(di-n-hexylsilane) (PDHS) and poly(methyl-n-octylsilane) (PMOS). The monolayer formation of such hydrophobic polysilanes was achieved by cospreading with a liquid crystal molecule, 4'-pentyl-4-cyanobiphenyl (5CB). The UV-visible absorption spectra showed that the backbone conformations of the polysilanes are completely different from that in the bulk. The layer-by-layer deposition allowed for the nanometer level evaluation of the thickness profile on the conformational changes. It is found that the conformational change of these hydrophobic polysilanes abruptly occurs at a monolayer level thickness boundary.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4'-cyano'biphenyl (8CB) or 4-pentyl-4"-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4'-cyanophenyl)cyclohexane (8PCH) or 4-octyl4'-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.     

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.     

Acceleration of laser-induced formation of gold nanoparticles in a poly(vinyl alcohol) film

Gold nanoparticles (AuNps) were fabricated in a poly(vinyl alcohol) (PVA) film using the photochemically generated benzophenone ketyl radical and PVA radical by laser irradiation as a reducing agent. The measurements of the surface plasmon band of AuNps indicated that AuNps continued growing in the PVA film for several hours or days after the laser irradiation. The formation process of AuNps in the PVA film was investigated by using laser flash photolysis and UV-vis absorption spectroscopy. Additive doping (formic acid or sodium 2-mercaptoethanesulfonate) in the PVA film dramatically accelerated or inhibited the formation rate of the AuNps, respectively. The doping of formic acid accelerated the formation rate of the AuNps by a factor of 10-20. On the contrary, doping of 2-mercaptoethanesulfonate inhibited the formation of AuNps. The mechanisms of the acceleration and inhibition were investigated by using laser flash photolysis. The effects of additives on the formation process of AuNps are discussed.