Polarographic and voltammetric studies of tetrabutylammonium hexacyanoferrate(III) and tetrabutylammonium hexacyanomanganate(III) in non-aqueous solvents

Tetrabutylammonium hexacyanomanganate(III) [(bu₄N)₃Mn(CN)₆] has been studied by polarography and cyclic voltammetry in formamide, methanol, ethanol, N-methylformamide, dichloromethane, dimethylsulfoxide, acetonitrile, N,N-dimethylformamide, propylenecarbonate, butyrolactone, N-methylthiopyrrolidone(2), N,N-dimethylthioformamide, 1.2-dichloroethane, N-methylpyrrolidone(2) and tetramethylenesulfone. Similar studies have been carried out for tetrabutylammonium hexacyanoferrate(III) [(bu₄N)₃ Fe(CN)₆] in the solvents formamide, N-methylformamide, dichloromethane, butyrolactone, N-methylthiopyrrolidone(2) and tetramethylenesulfone. The half-wave potentials of the reductions (bu₄N)₃Mn(CN)₆ to (bu₄N)₄Mn(CN)₆ and (bu₄N)₃Fe(CN)₆ to (bu₄N)₄Fe(CN)₆ versus bisbiphenylchromium(I)/bisbiphenylchromium(0) as a reference redox system were found to vary with the nature of the solvent. Comparison with data previously obtained for the respective tetraethylammonium salts of hexacyanoferrate(III) and hexacyanomanganate(III) have shown that the redox behaviour of these compounds is influenced by both the solvent and the tetraalkylammonium ions. Correlations exist between the half-wave potentials of (bu₄N)₃Mn(CN)₆ and (bu₄N)₃Fe(CN)₆ and both the acceptor number of the solvents and the free enthalpies of transfer of the chloride ion. The results are discussed in the concept of donor-acceptor interactions.     

Determination of lead by hydride generation inductively coupled plasma mass spectrometry (HG-ICP-MS): On-line generation of plumbane using potassium hexacyanomanganate(III)

A hydride generation (HG) procedure has been described for determination of Pb by ICP-MS using potassium hexacyanomanganate(III), K₃Mn(CN)₆, as an additive to facilitate the generation of plumbane (PbH₄). Potassium hexacyanomanganate(III) was prepared in acidic medium as it was unstable in water. The stability of hexacyanomanganate(III) was examined in dilute solutions of HCl, HNO₃ and H₂SO₄. The solutions prepared in 1% v/v H₂SO₄ were found to be stable for over a period of 24 h. The least suitable medium was 1% v/v HNO₃. For generation of plumbane, acidic hexacyanomanganate(III) and sample solutions were mixed on-line along a 5-cm long tygon tubing (1.14 mm i.d.) and then reacted with 2% m/v sodium borohydride (NaBH₄). A concentration of 0.5% m/v K₃Mn(CN)₆ facilitated the generation of PbH₄ remarkably. In comparison to H₂SO₄, HCl provided broader working range for which optimum concentration was 1% v/v. No significant interferences were noted from transition metals and hydride forming elements, up to 0.5 μg mL⁻¹ levels, except Cu which depressed the signals severely. The depressive effects in the presence of 0.1 μg mL⁻¹ Cu were alleviated by increasing the concentration of K₃Mn(CN)₆ to 2% m/v. Under these conditions, the sensitivity was enhanced by a factor of at least 42 to 48. The detection limit (3 s) was 0.008 μg L⁻¹ for ²⁰⁸Pb isotope. Average signal-to-noise ratio (S/N) ranged between 18 and 20 for 1.0 μg mL⁻¹ Pb solution. The accuracy of the method was verified by analysis of several certified reference materials, including Nearshore seawater (CASS-4), Bone ash (SRM 1400), and Mussel tissue (SRM 2976). The procedure was also successfully applied to the determination of Pb in coastal seawater samples by ICP-MS.     

Electrochemistry and Electrocatalysis of a Nafion/Nano‐CaCO3/Hb Film Modified Carbon Ionic Liquid Electrode Using BMIMPF6 as Binder

In this paper a room temperature ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was used as binder for the construction of carbon ionic liquid electrode (CILE) and a new electrochemical biosensor was developed for determination of H₂O₂ by immobilization of hemoglobin (Hb) in the composite film of Nafion/nano‐CaCO₃ on the surface of CILE. The Hb modified electrode showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa and E_pc as ?0.265 V and ?0.470 V (vs. SCE). The formal potential (E°′) was got by the midpoint of E_pa and E_pc as ?0.368 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The peak to peak separation was 205 mV in pH 7.0 Britton–Robinson (B–R) buffer solution at the scan rate of 100 mV/s. The direct electrochemistry of Hb in the film was carefully investigated and the electrochemical parameters of Hb on the modified electrode were calculated as α=0.487 and k_s=0.128 s^?1. The Nafion/nano‐CaCO₃/Hb film electrode showed good electrocatalysis to the reduction of H₂O₂ in the linear range from 8.0 to 240.0 μmol/L and the detection limit as 5.0 μmol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) was estimated to be 65.7 μmol/L. UV‐vis absorption spectroscopy and FT‐IR spectroscopy showed that Hb in the Nafion/nano‐CaCO₃ composite film could retain its native structure.     

Electrocatalytic reduction of O2 at pyrolytic graphite electrode modified by a novel copper(II) complex with 2-[bis(2-aminoethyl)amino]ethanol and imidazole ligands

A new complex formed by Cu(II) with 2-[bis(2-aminoethyl)amino]ethanol and imidazole is prepared, and its electrochemical properties are studied. The electrochemical experiments are carried out in deaerated pH 7.0 buffer solution through cyclic voltammetry by scanning the potential from 0.1 to −0.5 V with this copper(II) complex-modified electrode as the working electrode. One redox process is observed, which could be assigned to Cu(II)/Cu(I). The formal potential E _0′ = (E _pa + E _pc)/2, where E _pa and E _pc are anodic and cathodic peak potentials, is −248 mV vs. SCE. A straight line, obtained from the plot of I _pc vs. v, indicated a surface-controlled reaction. The modified electrode is very stable and exhibits catalytic activity for oxygen reduction. The possible mechanism for the catalytic reduction of oxygen is studied by cyclic voltammetry and chronoamperometry. The results show that the dioxygen is reduced via a pathway of four-electron reduction to form water. Chronoamperometric measurements show the potentiality of the use of this working electrode as an amperometric sensor for dissolved dioxygen in aqueous media. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 8, pp. 975–979. The text was submitted by the authors in English.     

Nickel(II) complex with 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane

A nickel(II) complex, [Ni(taetacn)](ClO₄)₂ ? H₂O, where taetacn = 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane was synthesized. The crystal structure was determined by the single-crystal X-ray diffraction method at 293 K. The complex crystallizes in the orthorhombic space group Pna2₁ with a = 16.004(2) Å, b = 10.186(1) Å, c = 13.937(2) Å, V = 2271.9(5) ų, D_x = 1.56 g cm^?3, D_m = 1.59 g cm^?3 (floatation method), and Z = 4. The R₁ [I > 2σ(I)] and wR₂ (all data) values are 0.0636 and 0.1672, respectively, for all 4845 independent reflections. The compound is composed of octahedral nickel(II) cation with three 2-aminoethyl pendant groups of taetacn, tetrahedral ClO ₄ ^? anion, and a water molecule of crystallization. Electronic spectra are consistent with the octahedral geometry. Temperature dependence of the magnetic susceptibility (4.5–300 K) can be interpreted considering the zero-field splitting of the nickel(II) ion (g = 2.14, D = 3.72 cm^?1, and Nα = 300 × 10^?6 cm³ mol^?1). Cyclic voltammetry in DMF showed quasi-reversible and irreversible oxidation waves (E_pa = 0.54 V, E_pc = 0.45 V; E_pa = 1.16 V, E_pc = 0.71 V vs. Ag/Ag⁺).     

Electrochemical behavior of [UO_2Cl_4]~(2-) in 1-ethyl-3-methylimidazolium based ionic liquids

In order to examine the chemical form of uranyl species in 1-ethyl-3-methylimidazolium(EMI) based ionic liquids,UV-visible absorption spectra of solutions prepared by dissolving [EMI] 2 [UO2Cl4] into a mixture of EMICl and EMIBF 4(50:50 mol%) were measured.As a result,it was confirmed that uranyl species in the mixture of EMICl and EMIBF 4 existed as [UO2Cl4]2-.Cyclic voltammograms(CVs) of [UO2Cl4]2-in the mixture were measured at 25 ℃ using a Pt working electrode,a Pt wire counter electrode,and an Ag/Ag + reference electrode(0.01 M AgNO 3,0.1 M tetrabutylammonium perchlorate in acetonitrile) in a glove box under an Ar atmosphere.Peaks corresponding to one redox couple were observed around-1.05 V(Epc) and-0.92 V(Epa) vs.ferrocene/ferrocenium ion(Fc/Fc +).The potential differences between two peaks(Ep) increased from 101 to 152 mV with an increase in the scan rate from 50 to 300 mV s-1,while the(Epc+Epa)/2 value was constant,-0.989 V vs.Fc/Fc + regardless of the scan rate.Furthermore,the diffusion coefficient of [UO2Cl4]2-and the standard rate constant were estimated to be 3.7 × 10-8 cm 2 s-1 and(2.7-2.8) × 10-4 cm s-1 at 25 oC.By using the diffusion coefficient and the standard rate constant,the simulation of CVs was performed based on the reaction,[UO2Cl4]2-+ e = [UO2Cl4]3-.The simulated CVs were found to be consistent with the experimental ones.From these results,it is concluded that [UO2Cl4]2-in the mixture of EMICl and EMIBF 4 is reduced to [UO2Cl4]3-quasi-reversibly at-0.989 V vs.Fc/Fc +.     

Voltammetric Characterization of Grafted Polymer Modified with ZnO Nanoparticles on Glassy Carbon Electrode

In this study, a grafted polymer (GP) with ZnO nanoparticles (GP/ZnO NPs) was attached on the surface of glassy carbon electrode (GCE), in order to produce a new modified electrode (GP/ZnO NPs-GCE). The gamma irradiation method was used to grafted polystyrene (polymer) with acrylonitrile (monomer), while slow evaporation process was used to prepare the new modified electrode. The cyclic voltammetry (CV) of K₄[Fe(CN)₆] was used to study the electrochemical properties GP/ZnO NPs-GCE. The peak separation (ΔE_pa-c) was 500 mV between the redox peaks of Fe(II)/Fe(III) in an aqueous solution of 1 M KCl and the current ratio of redox current peaks (I_pa/I_pc) was ≈ 1 for the modified electrode. This indicated that the modified electrode has s good reversibility and conductivity, wherefore; it was applied in the voltammetric filed. It was found that the modified electrode GP/ZnO NPs-GCE have a reasonable solubility and stability at various pH medium. Additionally, the sensitivity of the electrochemical analysis by cyclic voltammetric (CV) method is extensively subjected to the pH medium and the scan rate (SR). A couple of redox current peaks of K₄[Fe(CN)₆] in KCl solution was observed with a reversible process: Fe³⁺/Fe²⁺. Finally a good diffusion coefficient of electroactive species (D) for the new modified electrode was found in this study by chronoamperometry method using Cottrell equation.     

A Single‐Chain Magnet Tape Based on Hexacyanomanganate(III)

The tape‐like chain {[(tptz)Mn^II(H₂O)Mn^III(CN)₆]₂Mn^II(H₂O)₂}_n?4n MeOH?2n H₂O based on the anisotropic building block hexacyanomanganate(III) exhibits long‐range magnetic ordering below 5.1 K as well as single‐chain magnetic behavior at lower temperatures with an effective energy barrier of 40.5(7) K.     

Voltammetric Studies of Cadmium‐ and Zinc‐Containing Metallothioneins at Nafion‐Coated Mercury Thin Film Electrodes

Voltammetric studies of rabbit liver metallothioneins (MTs, containing both Zn and Cd ions) and Zn₇‐MT were carried out at Nafion‐coated mercury film electrodes (NCMFEs). The accumulation of MT molecules into the NCMFEs enhances the voltammetric signals and the electrostatic interaction between the Nafion membrane and MT facilitates facile electron transfer reactions. Two well‐defined redox waves, with reduction potential (E_pc) values at ?0.740 and ?1.173 V, respectively, were observed. The peak at E_pc =?0.740 V is attributable to the reduction of the Cd‐MT complex, whereas that at E_pc=?1.173 V was assigned to the reduction of the Zn‐MT complex. Zn₇‐MT exhibits only one redox wave with E_pc=?1.198 V. The NCMFE was found to be more advantageous than thin mercury film electrode (MFE), because the pristine metal ions in MTs (e.g., Cd²⁺ and/or Zn²⁺) are not significantly replaced by Hg²⁺. The NCMFE is also complementary to Nafion‐coated bismuth film electrode in that it has a greater hydrogen overpotential, which allows the reduction of the Zn‐MT complex to be clearly observed. Moreover, intermetallic compound formation between Cd and Zn appears to be less serious at NCMFEs. Consequently, the amounts of Cd and Zn deposited into the electrode upon the reduction reactions can be quantified more accurately.     

Solvent effects on the redox potential of cis-tetracarbonyl-bis-(1,3 dimethylimidazolidin-2-ylidene) chromium(0)

Polarography and cyclic voltammetry have been performed on cis-tetracarbonyl-bis-(1,3 dimethylimidazolidin-2-ylidene) chromium(0) [cis(imidine)₂Cr(CO)₄] in dichloromethane, 1,2-dichloroethane, methanol, ethanol, nitromethane, 2,2′ thiodiethanol, acetonitrile, formamide, N-methylformamide, N,N-dimethylformamide, N,N-dimethylthioformamide, acetone, propylene carbonate, N-methylpyrrolidone(2), N-methylthiopyrrolidone(2), tetramethylene sulfone, butyrolactone, N,N,N′,N′-tetramethylurea, N,N-diethylacetamide, N,N-dimethylacetamide, trimethylphosphate, dimethylsulfoxide and hexamethylene phosphoric acid triamide.A reversible oxidation to the [cis(imidine)₂Cr(CO)₄]⁺ cation has been observed in the solvents mentioned. The half-wave and 1/2(E_pa+E_pc) potentials recorded vs. bisbiphenylchromium(I)/bisbiphenylchromium(0) as a reference redox system were found to shift to more positive values with increasing electron-pair donor properties of the solvents. The polarographic and voltammetric behaviour of ferrocene and bisbiphenylchromium tetraphenyloborate has been studied in N,N-diethylacetamide, N,N-dimethylacetamide, formamide, trimethylphosphate, N,N,N′,N′-tetramethylurea and hexamethylene phosphoric acid triamide.     

Sorption of [Fe(CN)6]3− and [Fe(CN)6]4− ions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels from aqueous solutions

The sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels at various pH values of hydrogel precipitation from solutions without a support electrolyte and from NaCl and Na₂SO₄ solutions with an ionic strength of 0.5 was studied. It was found that isotherms of sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions from solutions without a support electrolyte and from NaCl solutions and those of sorption of [Fe(CN)₆]^4? from Na₂SO₄ solutions are described by the Langmuir equation. It was established that the sulfate background suppresses the sorption of [Fe(CN)₆]^3? on Fe(III) and Zr(IV) oxyhydroxides. Both anions are sorbed only when the surface of the oxyhydroxides is charged positively; the Langmuir equation parameters A _max and K tend to decrease to the point of zero charge as the pH value of oxyhydroxide precipitation increases. An electrostatic mechanism of the sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions was suggested.     

Cyan-Blue Luminescence and Antiferromagnetic Coupling of CN-Bridged Tetranuclear Complex Based on Manganese(III) Schiff Base and Hexacyanoferrate(III)

A new tetranuclear cyanide-bridged Mn^III–Fe^III complex based on manganese(III) Schiff base and hexacyanoferrate(III) units, [Mn(L)(MeOH)₂][{Mn(L)}{Fe(CN)₆}{Mn(L)(MeOH)}].2MeOH, [H₂L?=?N,N′-bis(2-hydroxy-1-naphthalidenato)-1,2-diaminopropane] (1), has been synthesized and characterized by elemental analysis, UV–Vis, FT-IR, PXRD, single crystal X-ray analyses, magnetic and photoluminescence measurements. Complex 1 consist of one trinuclear cyanido-bridged anion, in which [Fe(CN)₆]^3? anion bridge [Mn(L)]⁺ and Mn(L)(MeOH)}]⁺ cations via two C≡N groups in the cis positions, and also one isolated manganese [Mn(L)(MeOH)₂]⁺ cation. DC magnetic susceptibility and magnetization studies showed that complex 1 indicates an antiferromagnetic coupling between low-spin Fe(III) and high-spin Mn(III) through the cyanide bridges. In addition, the complex 1 displays a strong cyan-blue luminescence emission in the solid state condition at room temperature. This behavior might be seen easily from the chromaticity diagram. Thus, the complex may be a good promising cyan-blue OLED developing electroluminescent materials for flatted or curved panel display applications due to the fact that it has such features.     

Solvent and salt effects on the redox behaviour of trisacetylacetonato manganese(III)

The polarographic and voltammetric behaviour of trisacetylacetonato manganese(III) [Mn(acac)₃] has been studied in methanol, ethanol, tetrahydrofurane, butyrolactone, propylenecarbonate, N,N-dimethylformamide, acetonitrile, nitromethane, N-methylpyrrolidone(2), 1,2-dichloroethane, dichloromethane, dimethylsulfoxide and acetic acid, Mn(acac)₃ was found to undergo a reversible one-electron reduction to Mn(acac)₃^? in most of the solvents mentioned. A further reduction at very negative potentials has been also observed in several solvents. The oxidation of Mn(acac)₃ to Mn(acac)₃⁺ has been studied by cyclovoltammetry in dichloromethane, nitromethane, acetonitrile, propylenecarbonate, N-methylpyrrolidinone(2), N,N-dimethylformamide and dimethylsulfoxide. The polarographic behaviour of NaMn(acac)₃ and Mn(acac)₂ has been investigated in the seven solvents listed above as well as in methanol. The half-wave potentials and the peak potentials referred to bisbiphenylchromium(I)/bisbiphenylchromium(0) as a reference redox system were found to vary with the nature of the solvent. Conductivity studies of Mn(acac)₃ and NaMn(acac)₃ have been carried out in these solvents. U.v.-visible and near i.r. spectra have been recorded of Mn(acac)₃, NaMn(acac)₃, Mn(acac)₂ and Na(acac) in the solvents mentioned. It has further been observed that the half-wave potentials for the polarographic reduction of Mn(acac)₃ shifted to more positive values by the addition of alkali metal ions and to more negative values by the addition of halide ions. The interactions of the solvent with Mn(acac)₃ and the variation of redox potentials with both the solvent and the added electrolytes will be discussed.     

The electrochemical Peltier effect observed with electrode reactions of Fe(II)/Fe(III) redox couples at a gold electrode

The electrochemical Peltier effect was studied at a gold electrode in solutions containing some Fe(II)/Fe(III) redox couples by measuring the local temperature change in the electrode/solution interphase under controlled-potential and controlled-current polarization. Relative values of the electrochemical Peltier coefficient for the cathodic process at equilibrium potential, which is denoted by (Π_c)_I=0, were determined by analyzing the observed temperature change as a function of current. The values of (Π_c)_I=0 were found to be positive for the Fe(H₂O)₆²⁺/Fe(H₂O)₆³⁺ systems in HClO₄ (1 M), HNO₃ (1 M), H₂SO₄ (0.5 M), and HCl (1 M), their magnitudes being very similar in the first three acid solutions, but smaller in the HCl solution. On the other hand, a negative value of (Π_c)_I=0 was obtained in the case of a Fe(CN)₆^4?/Fe(CN)₆^3? couple in a H₂SO₄ (0.5 M) solution. Such a difference in the Peltier coefficient is considered to be due to the difference in the ionic species of iron involved in the electrode reaction.     

Electrochemical Investigation of Potassium Heptacyanorhenate(III) in Aqueous Solution

The electrochemistry of potassium heptacyanorhenate(III) in aqueous solution was studied by cyclic and by rotating disk voltammetry at planar microelectrodes. The results are consistent with a single, reversible electron transfer: Re(CN)^3?₇ + e?Re(CN)^4?₇ with E′₀ = 643 mV vs. NHE. A single protonation equilibrium is observed: Re(CN)^4?₇ + H⁺? Re(CN)₇H^3? with pK = 1.31 determined from combined voltammetric and pH data. The Re–CN bond appears to be kinetically inert, and none of the cyano complexes in other oxidation states of Re claimed in the literature was found in the potential range ? 2 V to + 1 V.     

Investigations on adsorption potentiometry Part I. Derivative adsorption chronopotentiometry of the iron(III)-2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol system

An electroanalytical method, based on derivative chronopotentiometry of the iron complex with 2-(5′-bromo-2′- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) accumulated adsorptively on the surface of a hanging mercury drop electrode, for determining trace iron in food has been developed. The dependences of the peak height on the dt/dE vs. E curve on the preconcentration time, preconcentration potential and electrode area are discussed. Optimum experimental conditions include 0.005 mol 1^?1 NH₃NH₄Cl, 2 × 10^?7 mol 1^?1 5-Br-PADAP and a preconcentration potential of ?0.40 V (vs. SCE). Under these conditions, the detection limit and the linear range are 2 × 10^?9 and 6.7 × 10^?9?1.7 × 10^?7 mol 1^?1, respectively. The relative standard error of the method is 1.5% for 6.7 × 10^?8 mol 1^?1 Fe(III). The method was applied to samples of microwave digested food.     

Solution and single crystal raman spectra of potassium hexacyanochromate(III)

Some inconsistency has existed in the assignment of the vibrational spectra of the Cr(CN)₆^3? ion, and the crystal structure of K₃Cr(CN)₆ has been described both as monoclinic C_2h⁵ and as orthorhombic D_2h¹⁴. The solution and single crystal Raman spectra were recorded at room temperature. On the basis of these data a new assignment was made and the crystal structure was determined to be orthorhombic.     

Kalium-μ-dithio-bis(pentacyanokobaltat(III)) und Kalium-μ-diseleno-bis(pentacyanokobaltat(III))

Potassium-μ-dithio-bis(pentacyanocobaltate(III)) and Potassium-μ-diseleno-bis(pentacyanocobaltate(III)) The oxidation of [Co(CN)₅]^3? by sulfur or selenium leads to the complexes [Co₂S₂(CN)₁₀]^6? and [Co₂Se₂(CN)₁₀]^6?, respectively, which have been isolated as potassium salts K₆[Co₂S₂(CN)₁₀] · 4 H₂O and K₆[Co₂Se₂(CN)₁₀] · 5 H₂O. The μ-dithio complex has also been formed from [Co(CN)₅]^3? with polysulfide, from [CoOH(CN)₅]^3? with H₂S + O₂ and from [Co₂O₂(CN)₁₀]^6? with H₂S. As shown by their vibrational spectra the new complexes contain bridges Co? S? S? Co and Co? Se? Se? Co, respectively.     

Crystallization method controlled trinuclear or ion-pair Manganese(III)-porphyrin-based heterobimetallic complexes: Synthesis,spectra characterization,and crystal structure

Cyanide-bridged trinuclear heterometallic Ag(I)-Mn(III) complex {[Mn(TClPP)(H₂O)]₂[Ag(CN)₂]}₂ · 2Br · 2C₃H₆O · 3H₂O (I) and ion-pair complex {[Mn(TClPP)(CH₃OH)₂][Ag(CN)₂]} · 0.5H₂O (II) have been synthesized with [Mn(TClTPP)(H₂O)₂]Br (H₂TClTPP = meso-tetra(4-chlorophenyl)porphyrin) as assembling segment and K[Ag(CN)₂] as building block by using different crystallization method. These two complexes have been characterized by elemental analysis, IR spectroscopy and X-ray structure determination. In the trinuclear complex I, [Ag(CN)₂]^? as bidentate ligand coordinates with the two central Mn(III) atom of [Mn(TClPP)(H₂O)₂]⁺ through its two trans cyanide groups to form the complex cation of [Mn(TClPP)(H₂O)]₂[Ag(CN)₂]⁺, which further constructs the neutral complexes with the help of one Br^? as balanced anion. For the ion-pair complex II composed by free [Mn(TClPP)(CH₃OH)₂]⁺ cation and free [Ag(CN)2]^? anion, it can be linked into one-dimensional supramolecular structure with the dependence of the intermolecular O-H...N and O-H...O hydrogen bond interactions.     

Electrochemical Behavior of a Glassy Carbon Electrode Chemically Modified with Nickel Pentacyanonitrosylferrate in Presence of Sulfur Compounds

The glassy carbon electrode was modified with a nickel pentacyanonitrosylferrate film by electrodeposition of Ni and subsequent derivatization with NaPCNF. The film was characterized by XPS and electrochemical methods. Cyclic voltammetry of the NiPCNF onto the GC shows a redox couple (Fe^III/Fe^II) with E°′ of 538 mV (I_pa/I_pc around 1) and ΔE_p of 93 mV in 0.5 mol L^?1 KNO₃, with a diffusion‐controlled process. There was a decrease of anodic peak currents of the film in the presence of sulfide and 2‐propanethiol due to a precipitation reaction on the film surface by nucleophilic attack.