Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

Zur Trennung von H2, O2, N2, NO, CO, N2O, CO2, C2H6, C2H4, C2H2, NO2(N2O4) und Feuchtigkeit

Ohne Zusammenfassung     

Ionization gauge sensitivities of N2, O2, N2O, NO, NO2, NH3, CClF3 and CH3OH

A Bayard-Alpert (BA) gauge was used to determine apparent relative sensitivites S_rel,X for O₂, N₂O, NO, NO₂, NH₃, CClF₃ and CH₃OH from gauge calibration measurements in the range 1.3×10^–1 Pap1.3·10^–3Pa. Nitrogen was used as a calibration standard.     

The geometry, vibrational frequencies, thermochemistry, quadrupole moments and electronic structure of C2Na2: Comparison with C2Li2, C2H2, C2F2 and C2Cl2

The electronic structure of Na₂C₂ is studied using ab initio electronic structure methods and is compared to the companion molecule Li₂C₂. Both the linear D_∞h and planar structures are minima on the ground state potential surface with the planar D_2h conformation being the lowest energy form, similar to Li₂C₂. At the CCSD(t) level the planar form is more stable that the linear by 11.2 kcal/mol as compared with 7.34 kcal/mol for Li₂C₂. Both molecules are significantly ionic. The vibrational frequencies, atomization energy at 0 K, D₀, and the standard enthalpy of formation, are calculated and compared to those of Li₂C₂ as well as HCCH, FCCF and ClCCCl. We find D₀ and to be 331.1 and 84.92 kcal/mol for Li₂C₂ and 298.3 and 93.25 kcal/mol for Na₂C₂. We calibrate these by calculating the same quantities for HCCH, FCCF and ClCCCl.     

High temperature crystal structures and superionic properties of SrCl2, SrBr2, BaCl2 and BaBr2

The structural properties of the binary alkaline-earth halides SrCl₂, SrBr₂, BaCl₂ and BaBr₂ have been investigated from ambient temperature up to close to their melting points, using the neutron powder diffraction technique. Fluorite-structured SrCl₂ undergoes a gradual transition to a superionic phase at 900–1100 K, characterised by an increasing concentration of anion Frenkel defects. At a temperature of 920(3) K, the tetragonal phase of SrBr₂ undergoes a first-order transition to a cubic fluorite phase. This high temperature phase shows the presence of extensive disorder within the anion sublattice, which differs from that found in superionic SrCl₂. BaCl₂ and BaBr₂ both adopt the cotunnite crystal structure under ambient conditions. BaCl₂ undergoes a first-order structural transition at 917(5) K to a disordered fluorite-structured phase. The relationship between the (disordered) crystal structures and the ionic conductivity behaviour is discussed and the influence of the size of the mobile anion on the superionic behaviour is explored.     

Walsh's rules and the geometries of BH2, CH2, NH2 and OH2

Walsh's rules for first-row triatomic dihydrides are found to have significant quantitative validity.     

Vapour-liquid equilibrium data for the systems C2H6 + N2, C2H4 + N2, C3H8 + N2, and C3H6 + N2

High pressure vapour-liquid equilibrium data for the C₂H₆ + N₂, C₂H₄ + N₂, C₃H₈ + N₂, and C₃H₆ + N₂ systems are presented. The data are obtained isothermally in the range from 200 K to 290 K. For each point of data, temperature, pressure and liquid and vapour phase mole fractions are measured.Values for the vapour phase mole fractions are calculated from the obtained pressure, temperature and liquid phase mole fractions. The calculated values are compared with the experimental results, and it is found that the average mean deviation between calculated and experimental mole fractions is less than 0.009 for the systems considered in this work.     

Spuren von Fremdgasen (H2, N2, O2, CO2) in Chlor

Ohne Zusammenfassung     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Lithium intercalation into PbNb2S5, PbNbS3, SnNb2Se5, BiVS3, SnVSe3, and PbNb2Se5 misfit layer chalcogenides

The intercalation of lithium into various misfit layer chalcogenides of two different stoichiometries was performed by using n-butyl lithium on powders. The reaction was found to proceed topochemically, and a greater expansion in the c direction and higher lithium contents were observed in the lithiated phases with “MM′₂X₅” approximate stoichiometries compared to “MM′X₃” stoichiometries. This behaviour difference is assigned to the different stacking sequence of the slices of the two sublattices formed by double layers of MX and sandwiches of M′X₂. Lattice distortions are induced during lithiation, leading to changes in the relative orientation of MS-type bilayers and to complete amorphization after long reaction times. The synthesis and partial characterization of a new misfit layer selenide of nominal composition “PbNb₂Se₅” is also reported. The value of the c-dimension (c = 37.3₇ Å) suggests a stacking sequence PbSe---NbSe₂---NbSe₂---PbSe---NbSe₂---NbSe₂, etc. This material becomes highly unstable on lithium intercalation and decomposes to its constituents after a few hours of lithiation.     

Syntheses, structures, optical properties, and theoretical calculations of Cs2Bi2ZnS5, Cs2Bi2CdS5, and Cs2Bi2MnS5

Three new compounds, Cs₂Bi₂ZnS₅, Cs₂Bi₂CdS₅, and Cs₂Bi₂MnS₅, have been synthesized from the respective elements and a reactive flux Cs₂S₃ at 973 K. The compounds are isostructural and crystallize in a new structure type in space group Pnma of the orthorhombic system with four formula units in cells of dimensions at 153 K of a=15.763(3), b=4.0965(9), c=18.197(4) Å, V=1175.0(4) Å³ for Cs₂Bi₂ZnS₅; a=15.817(2), b=4.1782(6), c=18.473(3)  Å, V=1220.8(3)  ų for Cs₂Bi₂CdS₅; and a=15.830(2), b=4.1515(5), c=18.372(2) Å, V=1207.4(2) Å³ for Cs₂Bi₂MnS₅. The structure is composed of two-dimensional _∞²[Bi₂MS₅²⁻] (M=Zn, Cd, Mn) layers that stack perpendicular to the [100] axis and are separated by Cs⁺ cations. The layers consist of edge-sharing _∞¹[Bi₂S₆⁶⁻] and _∞¹[MS₃⁴⁻] chains built from BiS₆ octahedral and MS₄ tetrahedral units. Two crystallographically unique Cs atoms are coordinated to S atoms in octahedral and monocapped trigonal prismatic environments. The structure of Cs₂Bi₂MS₅, is related to that of Na₂ZrCu₂S₄ and those of the AMM′Q₃ materials (A=alkali metal, M=rare-earth or Group 4 element, M′= Group 11 or 12 element, Q=chalcogen). First-principles theoretical calculations indicate that Cs₂Bi₂ZnS₅ and Cs₂Bi₂CdS₅ are semiconductors with indirect band gaps of 1.85 and 1.75 eV, respectively. The experimental band gap for Cs₂Bi₂CdS₅ is ≈1.7 eV, as derived from its optical absorption spectrum.     

High-pressure modifications of CaZn2, SrZn2, SrAl2, and BaAl2: Implications for Laves phase structural trends

High-pressure forms of intermetallic compounds with the composition CaZn₂, SrZn₂, SrAl₂, and BaAl₂ were synthesized from CeCu₂-type precursors (CaZn₂, SrZn₂, SrAl₂) and Ba₂₁Al₄₀ by multi-anvil techniques and investigated by X-ray powder diffraction (SrAl₂ and BaAl₂), X-ray single-crystal diffraction (CaZn₂), and electron microscopy (SrZn₂). Their structures correspond to that of Laves phases. Whereas the dialuminides crystallize in the cubic MgCu₂ (C15) structure, the dizincides adopt the hexagonal MgZn₂ (C14) structure. This trend is in agreement with the structural relationship displayed by sp bonded Laves phase systems at ambient conditions.     

Bond function parameter transferability in SO2, SF2 and SO2F2

Ab initio MO studies of the use of gaussian bond functions in the molecules SO₂,SF₂ are presented. It is shown that optimization of bond function exponent and position parameters in the small molecules is a good approximation to the optimum parameter set for SO₂F₂,     

Composition of gas hydrates of CHClF2, CCl2F2 and SF6

Gas hydrates are forms of ice stabilized by the presence of molecules of gas occupying cavities in the solid water lattice. There are two common forms: structure I and structure II. The mean free diameters of the two types of cavities in structure I are about 5.0 and 5.8 angstroms. Very small gas molecules such as Xe or H₂S can occupy both. In the past it has been considered that gas molecules of larger diameter than 5.0 angstroms could not occupy the smaller cavities. It has now been shown through measurement of hydration numbers of CHClF₂ (diameter about 5.4 angstroms) under various pressures at 0°, that some of the small cavities are filled. This state of affairs also exists for CH₃Br. In structure II, the mean diameters of the two types of cavities are about 5.0 and 6.6 angstroms. Hydration numbers of SF₆ (diameter about 5.8 angstroms) and CCl₂F₂ (about 6.2 angstromsm) show that nearly all of the large cavities but essentially none of the small cavities are occupied.     

Reactions of C2(a 3πu) with CH4, C2H2, C2H4, C2H6, and O2 using multiphoton UV excimer laser photolysis

C₂(a ³π_u) disappearance rate constants of 1.44, 0.96, 0.0296, 0.0130 and < 10^?6(x10^?10cm³s^?1) are reported for reactions with C₂H₄, C₂H₂, O₂, C₂H₆, and CH₄, respectively at 298 K. C₂(a ³π_u) fragments are generated by multiphoton ArF excimer laser photodissociation at C₂H₂, and monitored by dye laser induced fluorescence. Arguments are presented which favor chemical reactions over the C₂(a ³π_u) → (X ¹σ⁺_g) quenching channel. C₂ + C₂H₂ represents the one possible exception to the reactive channel.     

Magnetic properties of Fe2P-type Tb6FeTe2, Tb6CoTe2, Tb6NiTe2 and Er6FeTe2 compounds

The magnetic ordering of the Fe₂P-type Tb₆FeTe₂, Tb₆CoTe₂ Tb₆NiTe₂ and Er₆FeTe₂ phases (space group P6¯2m) has been investigated through magnetization measurement and neutron powder diffraction. Tb₆FeTe₂, Tb₆CoTe₂ and Tb₆NiTe₂ demonstrate high-temperature ferromagnetic and low-temperature spin reorientation transitions, whereas Er₆FeTe₂ shows antiferromagnetic transition, only.The Tb₆FeTe₂ and Tb₆NiTe₂ phases show same high-temperature collinear ferromagnetic structure, whereas Tb₆FeTe₂ is the commensurate non-collinear ferromagnet and Tb₆NiTe₂ is the canted ferromagnetic cone with K₁=[0, 0, ±3/10] and K₂=[±2/9, ±2/9, 0] wave vectors at 2 K. The magnetic structure of Er₆FeTe₂ is a flat spiral with K₁=[0, 0, ±1/10] at 2 K. The magnetic entropy change for Tb₆NiTe₂ is ΔS_m=−4.86 J/kg K at 229 K for the field change Δμ₀H=0-5 T.In addition, novel Fe₂P-type Gd₆FeTe₂, Zr₆FeTe₂, Hf₆FeTe₂, Dy₆NiTe₂, Zr₆NiTe₂ and Hf₆NiTe₂ phases have been obtained.     

Sulfation of CuO,Fe2O3, MnO2, and NiO with (NH4)2SO4

An attempt has been made to calculate the free energy values for possible reactions utilising the available thermodynamic data in order to study the sulfation of CuO, Fe₂O₃, MnO₂ and NiO with (NH₄SO₄, and further trials have been made to determine the exact reaction through differential thermal analysis. There is no real correlation between the theoretical value of ΔH° and that calculated from the DTA peak, which may be due to some uncertainty in the thermodynamic values and the possibility of some side reactions.     

Syntheses, crystal structures, and properties of three new metal selenites Na2Co2(SeO3)3, Na2Co1.67Ni0.33(SeO3)3, and Na2Ni2(SeO3)3

Three new sodium cobalt (nickel) selenite compounds, namely, Na₂Co₂(SeO₃)₃, Na₂Co_1.67Ni_0.33(SeO₃)₃, and Na₂Ni₂(SeO₃)₃ have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO₃] pillared by the [SeO₃]²⁻ groups. The two different types of Na⁺ ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds.     

Infrared studies of the diatomic molecules O2, N2, NO and H2 adsorbed on Fe2O3

An infrared spectroscopic study of the diatomic molecules O₂, N₂, NO and H₂ adsorbed under different conditions on Fe₂O₃ has been performed.Complex patterns of absorption on both α-Fe₂O₃ and γ-Fe₂O₃ activated in O₂ at high temperature are assigned to vibrations of two different chemisorbed O₂ species.N₂ molecules do not interact with “oxygen rich” α-Fe₂O₃ surfaces, but give N₂O^? and N₂O₂^2? species when chemisorbed on evacuated surfaces.NO molecules give complex patterns of absorption, depending on the gas pressure. Three different types of nitrate structures can be identified, as well as NO, NO^? and cis-N₂O₂ chemisorbed species. Chemisorbed water molecules are formed by contact of H₂ with Fe₂O₃ surfaces even at room temperature.     

Slow energy transfer between vibrational models of CH2Cl2, CD2Cl2, CH2ClBr and CH2Br2

Inefficient vibrational energy exchange between the lowest vibrational mode and the higher lying vibrational modes of CH₂Cl₂, CD₂Cl₂, CH₂ClBr and CH₂Br₂ was investigated by ultrasonic absorption experiments. Breathing sphere theory is used to interpret the data available for VV and VR, T transfer in methylene halides.