A "turn-off" luminescence resonance energy transfer aptamer sensor based on near-infrared upconverting NaYF4:Yb3+,Tm3+ nanoparticles as donors and gold nanorods as acceptors

Near-infrared upconverting NaYF₄:Yb^3*,Tm^3* nanophosphors modified with poly（acrylic acid） were prepared and characterized by transmission electron microscopy and luminescence spectroscopy.Based on the observed overlap between the emission spectrum of the NaYF₄:Yb^3*,Tm^3* nanophosphors and the absorption spectrum of the gold nanorods,we believe that a new "turn-off luminescence resonance energy transfer aptamer sensor was constructed for sensing thrombin in near-infrared region.     

Aptamer‐Based Luminescence Energy Transfer from Near‐Infrared‐to‐Near‐Infrared Upconverting Nanoparticles to Gold Nanorods and Its Application for the Detection of Thrombin

A new luminescence energy transfer (LET) system has been designed for the detection of thrombin in the near‐infrared (NIR) region by utilizing NIR‐to‐NIR upconversion lanthanide nanophosphors (UCNPs) as the donor and gold nanorods (Au NRs) as the acceptor. The use of upconverting NaYF₄:Yb³⁺,Tm³⁺ nanoparticles with sharp NIR emission peaks upon NIR excitation by an inexpensive infrared continuous wave laser diode provided large spectral overlap between the donor and the acceptor. Both the Au NRs and carboxyl‐terminated NaYF₄:Yb³⁺,Tm³⁺ UCNPs were first modified with different thrombin aptamers. When thrombin was added, a LET system was then formed because of the specific recognition between the thrombin aptamers and thrombin. The LET system was used to monitor thrombin concentrations in aqueous buffer and human blood samples. The limits of detection for thrombin are as low as 0.118 nM in buffer solution and 0.129 nM in human serum. The method was also successfully applied to thrombin detection in blood samples.     

基于NaYF4:Yb3+,Er3+上转换发光纳米晶的复合微球组装及其光动力活性研究

采用微乳液法,以NaYF₄:Yb³⁺,Er³⁺纳米晶为发光基元,肽菁锌(ZnPc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF₄-ZnPc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF₄可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化ZnPc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

Synthesis and characterization of nanoporous NaYF4:Yb3+, Tm3+@SiO2 nanocomposites

Novel upconversion nanocomposites with nanoporous structure were presented in this paper. Silica-coated cubic NaYF₄:Yb³⁺, Tm³⁺ nanoparticles were first prepared. After annealing, monodisperse cubic/hexagonal mixed phases NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles were obtained, and the NaYF₄:Yb³⁺, Tm³⁺ cores became nanoporous. To the best of our knowledge, the nanoporous structure in NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanocomposites was observed for the first time. They demonstrate increased upconversion emission compared with unannealed dense NaYF₄:Yb³⁺, Tm³⁺ nanoparticles due to the appearance of the hexagonal NaYF₄:Yb³⁺, Tm³⁺. The silica shell not only makes the nanocomposites possess bio-affinity but also protects the NaYF₄:Yb³⁺, Tm³⁺ cores from aggregating and growing up. Thus the upconversion, nanoporous and bio-affinity properties were combined into one single nanoparticle. The nanocomposites have been characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small angle X-ray diffraction (SAXRD) and emission spectroscopy. These multifunctional nanocomposites are expected to find applications in biological fields, such as biolabels, drug storage and delivery.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

基于NaYF_4∶Yb~(3+),Er~(3+)上转换发光纳米晶的复合微球组装及其光动力活性

采用微乳液法,以NaYF4∶Yb3+,Er3+纳米晶为发光基元,肽菁锌(Zn Pc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF4-Zn Pc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF4可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化Zn Pc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

Luminescence Tuning of Upconversion Nanocrystals

Upconversion luminescence tuning of β‐NaYF₄ nanorods under 980 nm excitation has successfully been achieved by tridoping with Ln³⁺ ions with different electronic structures. The effects of Ce³⁺ ions on NaYF₄:Yb³⁺/Ho³⁺ as well as Gd³⁺ ions on NaYF₄:Yb³⁺/Tm³⁺(Er³⁺) have been studied in detail. By tridoping with Ce³⁺ ions, not only were unusual ⁵G₅→⁵I₇ and ⁵F₂/³K₈→⁵I₈ transitions from Ho³⁺ ions and 5d→4f transitions from Ce³⁺ ions observed in NaYF₄:Yb³⁺/Ho³⁺ nanorods, but also an increase in the intensity of ⁵F₅→⁵I₈ relative to ⁵S₂/⁵F₄→⁵I₈ with increasing Ce³⁺ concentration, which can be attributed to efficient energy transfers of ⁵I₆ (Ho)+²F_5/2 (Ce)→⁵I₇ (Ho)+²F_7/2 (Ce) and ⁵S₂/⁵F₄ (Ho)+²F_5/2 (Ce)→⁵F₅ (Ho)+²F_7/2 (Ce). Interestingly, with increasing pump power density, the luminescence of NaYF₄:Yb³⁺/Ho³⁺ nanorods is always dominated by the ⁵S₂/⁵F₄→⁵I₈ transition, whereas the luminescence of Ce³⁺‐tridoped NaYF₄:Yb³⁺/Ho³⁺ nanorods is dominated by the ⁵S₂/⁵F₄→⁵I₈ and ⁵G₅→⁵I₇ transitions in turn. These observations are discussed on the basis of a rate equation model. Furthermore, Gd³⁺‐tridoped NaYF₄:Yb³⁺/Tm³⁺(Er³⁺) nanorods can emit multicolor upconversion emissions spanning from the UV to the near‐infrared under 980 nm excitation. ⁶P_5/2→⁸S_7/2 (≈306 nm) and ⁶P_7/2→⁸S_7/2 (≈311 nm) transitions from Gd³⁺ ions were observed. In addition to the aforementioned luminescence properties, these Gd³⁺‐tridoped nanorods also exhibit paramagnetic behavior at room temperature and superparamagnetic behavior at 2 or 5 K.     

Comparative investigation on structure and luminescence properties of fluoride phosphors codoped with Er/Yb

This paper reports on comparative investigation of structure and luminescence properties of tetragonal LiYF₄ and BaYF₅, and hexagonal NaYF₄ phosphors codoped with Er³⁺/Yb³⁺ by a facile hydrothermal synthesis. The products were characterized by X-ray diffractometer, scanning electron microscope, and photoluminescence spectroscopy. Intense visible emissions centered at around 525, 550 and 650 nm, originated from the transitions of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 of Er³⁺, respectively, have been observed in all the samples upon excitation with a 980 nm laser diode, and the involved mechanisms have been explained. Based on the green up-conversion emission performance, the Yb³⁺ concentrations of Er³⁺/Yb³⁺-codoped LiYF₄, BaYF₅, and NaYF₄ phosphors have been optimized to be 10, 20, and 20 mol.%, respectively. The quadratic dependence of fluorescence on excitation laser power has confirmed that two-photon contribute to up-conversion of the green–red emissions.     

Controllable Multicolor Upconversion Luminescence by Tuning the NaF Dosage

Multicolor upconversion (UC) luminescence of NaYF₄:Yb³⁺/Er³⁺ nanoparticles (NPs) was successfully tuned by simply controlling the NaF dosage. Unlike UC nanocrystals previously reported in the literature with multicolor emission obtained by varying the rare‐earth dopants, the current work developed a new approach to tune the UC emission color by controlling the NaF concentration without changing the ratio and dosage of rare‐earth ions. TEM and powder XRD were used to characterize the shape, size, and composition of the UC luminescent nanocrystals. The luminescence images, emission spectra, and multicolor emission mechanism of the NPs have also been demonstrated. As a result of the excellent ability of this new method to manipulate color emission, this will open up new avenues in the areas of bioprobes, light‐emitting devices, color displays, lasers, and so forth. To demonstrate their biological applications, the water‐stable, biocompatible, and bioconjugatable NaYF₄:Yb³⁺/Er³⁺@poly(acrylic acid) NPs were synthesized by this developed strategy and applied in targeted‐cell UC luminescence imaging.     

Temperature-dependent six-photon upconversion fluorescence of Er

Yb³⁺/Er³⁺ codoped β-NaYF₄ microcrystals were synthesized through a facile EDTA-assisted hydrothermal method. Under 980 nm excitation, 244, 256, and 276 nm upconversion (UC) emissions were observed in NaYF₄:Yb³⁺/Er³⁺ microcrystals, which were assigned to the ²I_11/2 → ⁴I_15/2, ⁴D_7/2 → ⁴I_15/2, and ⁴G_9/2 → ⁴I_15/2 transitions of Er³⁺ ions, respectively. Successive energy transfers (ETs) from Yb³⁺ to Er³⁺ played crucial roles in populating the high-energy states of Er³⁺ ions. Power dependence analysis exhibited that 244 and 256 nm UC emissions came from six-photon processes. Temperature-dependent UC emissions of ⁴D_7/2 → ⁴I_15/2 and ²I_11/2 → ⁴I_15/2 transitions of Er³⁺ were discussed and the nonradiative relaxation (NR) process of ²I_11/2 → ⁴D_7/2 was confirmed.     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al₂O₃-SiO₂系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho³⁺/Yb³⁺共掺以ZnAl₂O₄为主晶相的ZnO-Al₂O₃-GeO₂-SiO₂系玻璃陶瓷。因[GeO₄]四面体和[SiO₄]四面体都是玻璃网络形成体,讨论了GeO₂取代SiO₂对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO₂的取代量为10.55%（w/w）时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色（546 nm）和弱的红色（650 nm）上转换发光,并研究了不同Ho³⁺/Yb³⁺掺杂比对样品上转换发光的影响,最终结果表明当Ho³⁺/Yb³⁺掺杂比为1：11（n/n）时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Er3+-Tm3+-Yb3+ tri-doped CaMoO4 upconverting phosphors in optical devices applications

The structural and optical properties of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphors prepared by chemical route have been explored. The crystalline structures of the prepared phosphors have been investigated with the help of X-ray diffraction analysis. The presence of different vibrational modes and absorption bands arising due to the transitions from the ground state to different excited states of rare earth ions have been identified using the Raman and UV-VIS-NIR absorption spectra of the developed phosphor, respectively. The concentration quenching effect on the luminescence property of the prepared materials has been explained in detail. The upconversion luminescence property of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphor annealed at different temperatures under 980 nm and 808 nm excitations have been reported. The energy transfer Er³⁺ → Tm³⁺, Yb³⁺ → Er³⁺ and Tm³⁺ has been found to be responsible for efficient UC emission. The dipole-dipole interaction is observed to be responsible for the concentration quenching of the luminescence intensity. The effect of annealing temperature on the upconversion luminescence property has been explained in detail. The results suggest that the developed tri-doped phosphor may be suitable in making the efficient NIR to visible upconverter and lighting based optical devices.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

Confining Excitation Energy in Er3+‐Sensitized Upconversion Nanocrystals through Tm3+‐Mediated Transient Energy Trapping

A new class of lanthanide‐doped upconversion nanoparticles are presented that are without Yb³⁺ or Nd³⁺ sensitizers in the host lattice. In erbium‐enriched core–shell NaErF₄:Tm (0.5 mol %)@NaYF₄ nanoparticles, a high degree of energy migration between Er³⁺ ions occurs to suppress the effect of concentration quenching upon surface coating. Unlike the conventional Yb³⁺‐Er³⁺ system, the Er³⁺ ion can serve as both the sensitizer and activator to enable an effective upconversion process. Importantly, an appropriate doping of Tm³⁺ has been demonstrated to further enhance upconversion luminescence through energy trapping. This endows the resultant nanoparticles with bright red (about 700‐fold enhancement) and near‐infrared luminescence that is achievable under multiple excitation wavelengths. This is a fundamental new pathway to mitigate the concentration quenching effect, thus offering a convenient method for red‐emitting upconversion nanoprobes for biological applications.     

Vacuum ultraviolet and near-infrared excited luminescence properties of Ca3(PO4)2:RE, Na (RE=Tb, Yb, Er, Tm, and Ho)

Tb³⁺, Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped Ca₃(PO₄)₂ were synthesized by solid-state reaction, and their luminescence properties were studied by spectra techniques. Tb³⁺-doped samples can exhibit intense green emission under VUV excitation, and the brightness for the optimal Tb³⁺ content is comparable with that of the commercial Zn₂SiO₄:Mn²⁺ green phosphor. Under near-infrared laser excitation, the upconversion luminescence spectra of Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped samples demonstrate that the red, green, and blue tricolored fluorescence could be obtained by codoping Yb³⁺-Ho³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Tm³⁺ in Ca₃(PO₄)₂, respectively. Good white upconversion emission with CIE chromaticity coordinates (0.358, 0.362) is achieved by quadri-doping Yb³⁺-Tm³⁺-Er³⁺-Ho³⁺ in Ca₃(PO₄)₂, in which the cross-relaxation process between Er³⁺ and Tm³⁺, producing the ¹D₂-³F₄ transition of Tm³⁺, is found. The upconversion mechanisms are elucidated through the laser power dependence of the upconverted emissions and the energy level diagrams.     

Confining Excitation Energy in Er3+-Sensitized Upconversion Nanocrystals through Tm3+-Mediated Transient Energy Trapping

A new class of lanthanide-doped upconversion nanoparticles are presented that are without Yb³⁺ or Nd³⁺ sensitizers in the host lattice. In erbium-enriched core–shell NaErF₄:Tm (0.5 mol %)@NaYF₄ nanoparticles, a high degree of energy migration between Er³⁺ ions occurs to suppress the effect of concentration quenching upon surface coating. Unlike the conventional Yb³⁺-Er³⁺ system, the Er³⁺ ion can serve as both the sensitizer and activator to enable an effective upconversion process. Importantly, an appropriate doping of Tm³⁺ has been demonstrated to further enhance upconversion luminescence through energy trapping. This endows the resultant nanoparticles with bright red (about 700-fold enhancement) and near-infrared luminescence that is achievable under multiple excitation wavelengths. This is a fundamental new pathway to mitigate the concentration quenching effect, thus offering a convenient method for red-emitting upconversion nanoprobes for biological applications.     

Quest to enhance up-conversion efficiency: a comparison of anhydrous vs. hydrous synthesis of NaGdF4: Yb3+ and Tm3+ nanoparticles

A major challenge in the field of up-converting (UC) nanomaterials is to enhance their efficiencies. The –OH defects on the surface of the nanoparticles are thought to be the main cause of luminescence quenching, but there are no comparative studies in the literature showing the impact of anhydrous vs. hydrous synthesis on up-conversion efficiency. In this article, we present the synthesis of up-converting NaGdF₄: Yb⁺³, Tm⁺³ nanoparticles by two different methods: thermal decomposition of single source metal-organic anhydrous precursors [NaLn(TFA)₄(diglyme)] (Ln = Gd, Tm, Yb; TFA = trifluoroacetate) and room temperature co-precipitation using hydrated inorganic salts Ln(NO₃)₃·5H₂O (Ln = Gd, Tm, Yb), NaNO₃ and NH₄F in ethylene glycol. After a detailed study on the influence of solvents and the percentage of lanthanide dopant on the crystal phase of the up-converting nanoparticles (NPs) and their complete characterization, a comparative up-conversion study was carried out which revealed that the uniform nanospheres (av. size ～13 nm) obtained from the anhydrous SSP had significantly higher up-conversion efficiency than agglomerated nanorods (～197 nm in length and ～95 nm in width) produced from hydrated inorganic salts. An enhanced up-conversion quantum yield of 1.8% for the anhydrous sample validates the anhydrous precursor approach as a strategy to obtain small but highly emitting up-converting particles without requiring a silica or undoped matrix surface passivation layer.     

Luminescent Hybrid Ionogels Functionalized with rare Earth fluoride Up‐conversion Nanocrystals Dispersing in Ionic Liquid

Rare earth doped fluorides (BaMgF₄, aYF₄ and BaYF₅/BaLuF₅) have been synthesized and dispersed in an ionic liquid compound, (3‐triethoxysilyl) propyl‐3‐methylimidazolium chloride (denoted as IM⁺Cl ^? ). Through the cohydrolysis and copolycondensatoin reaction between the alkoxy group (3‐triethoxysilyl) of IM⁺ and tetraethoxysilane in the presence of carboxylic acids (formic acid) as catalyst and water source, luminescent hybrid ionogels form subsequently. ¹H NMR spectroscopy, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy and especially up‐conversion (UC) luminescence spectroscopy are used to characterize the precursors and the resulted hybrid ionogels. These hybrid ionogels exhibit the UC luminescence properties of immobilized rare earth fluoride nanocrystals (BaMgF₄, NaYF₄ and BaYF₅/BaLuF₅) doped Er³⁺/Tm³⁺, Yb³⁺.     

Synthesis,characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF4:Yb3+/Tm3+ nanoparticles suitable for medical applications

Synthesis, characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (UCLNPs) are reported in the current study. Initially, the synthesized lanthanide trifluoroacetate (Ln(OOCCF₃)₃) precursor was used to fabricate NaLuF₄ nanoparticles doped with Yb³⁺ and Tm³⁺ metal ions. The nanoparticles were coated with calcium carbonate (CaCO₃) after removing the hydrophobic species on them to enhance their biocompatibility. The in vitro methylthiazolyldiphenyl-tetrazoliumbromide (MTT) test was used to evaluate the toxicity of synthesized NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (NLF-5) on L929 mouse fibroblast cell lines. The transmission electron microscopy image showed that the particle size of NaLuF₄:Yb³⁺/Tm³⁺ was 32 nm. The synthesized NLF-5 nanoparticles have both α-cubic and β-hexagonal crystalline structures that provided a superb near-infrared-to-near-infrared upconversion luminescence signal when excited at 980 nm. MTT test results show that the death of L929 fibroblast cells was observed only at concentrations above 250 μg/mL of NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles. In addition, with an increase in patrol time of 24, 48, and 72 hr, cell toxicity increased significantly, while the coated nanoparticles did not have any toxic effects. The synthesized nanoparticles could be used as a suitable material for medical applications due to their small particle size, high photoluminescence emission intensity, and low toxicity.     

Structural and Spectroscopic Effects of Li+ Substitution for Na+ in LixNa1-xCaGd0.5Ho0.05Yb0.45(MoO4)3 Scheelite-Type Upconversion Phosphors

A set of new triple molybdates, Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45, was successfully manufactured by the microwave-accompanied sol–gel-based process (MAS). Yellow molybdate phosphors Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45 with variation of the Li_xNa_1-x (x = 0, 0.05, 0.1, 0.2, 0.3) ratio under constant doping amounts of Ho³⁺ = 0.05 and Yb³⁺ = 0.45 were obtained, and the effect of Li⁺ on their spectroscopic features was investigated. The crystal structures of Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45 (x = 0, 0.05, 0.1, 0.2, 0.3) at room temperature were determined in space group I4₁/a by Rietveld analysis. Pure NaCaGd_0.5Ho_0.05Yb_0.45(MoO₄)₃ has a scheelite-type structure with cell parameters a = 5.2077 (2) and c = 11.3657 (5) Å, V = 308.24 (3) ų, Z = 4. In Li-doped samples, big cation sites are occupied by a mixture of (Li,Na,Gd,Ho,Yb) ions, and this provides a linear cell volume decrease with increasing Li doping level. The evaluated upconversion (UC) behavior and Raman spectroscopic results of the phosphors are discussed in detail. Under excitation at 980 nm, the phosphors provide yellow color emission based on the ⁵S₂/⁵F₄ → ⁵I₈ green emission and the ⁵F₅ → ⁵I₈ red emission. The incorporated Li⁺ ions gave rise to local symmetry distortion (LSD) around the cations in the substituted crystalline structure by the Ho³⁺ and Yb³⁺ ions, and they further affected the UC transition probabilities in triple molybdates Li_xNa_1-xCaGd_0.5(MoO₄)₃:Ho³⁺_0.05/Yb³⁺_0.45. The complex UC intensity dependence on the Li content is explained by the specificity of unit cell distortion in a disordered large ion system within the scheelite crystal structure. The Raman spectra of Li_xNa_1-xCaGd_0.5(MoO₄)₃ doped with Ho³⁺ and Yb³⁺ ions were totally superimposed with the luminescence signal of Ho³⁺ ions in the range of Mo–O stretching vibrations, and increasing the Li⁺ content resulted in a change in the Ho³⁺ multiplet intensity. The individual chromaticity points (ICP) for the LiNaCaGd(MoO₄)₃:Ho³⁺,Yb³⁺ phosphors correspond to the equal-energy point in the standard CIE (Commission Internationale de L’Eclairage) coordinates.