Hydrothermal synthesis, crystal structure and luminescence of four novel metal-organic frameworks

Using the principle of crystal engineering, four novel metal-organic coordination polymers, {[Cd₁(nic)2(H₂O)]2[Cd₂(nic)2(H₂O)2]}_n (1), [Cd₂(fma)2(phen)2]_n (2), [Cd(fma)(bipy)(H₂O)]_n (3) and [Zn(mal)(bipy)·3H₂O]_n (4) (nic=nicotinate, fma=fumarate, mal=malate, phen=phenanthroline, bipy=2,2′-bipyridine) have been synthesized by hydrothermal reaction of M(CH₃COO)2·2H₂O (M=Zn, Cd) with nicotinic acid, fumaric acid and cooperative L (L=phen, bipy), respectively. X-ray analysis reveals that complex 1 possesses an unprecedented two-dimensional topology structure constructed from three-ply-like layers, complex 2 is an infinite 2D undulating network, complex 3 is a 1D zigzag chain and complex 4 belongs to a 1D chain. The results indicate a transformation of fumarate into malate during the course of hydrothermal treatment of complex 4. The photophysical properties have been investigated with luminescent excitation and emission spectra.     

Synthesis and luminescence properties of novel red-emitting phosphor InNbO4:Eu3+ for white-light emitting diodes

Red-emitting phosphor InNbO₄:Eu³⁺ was synthesized by the solid-state reaction. Its crystal structure, particle size distribution, and luminescence properties were studied. The powder X-ray diffraction pattern shows that pure InNbO₄:Eu³⁺ was obtained. According to the spectra obtained, this phosphor can efficiently be excited with the light at wavelengths of 394 and 466 nm to emit the strong red radiation at 612 nm due to the ⁵ D ₀→⁷ F ₂ transition of Eu³⁺. The best results were obtained at the concentration of the Eu³⁺ dopant equal to 4 mol.%. The chromaticity parameters of InNbO₄:0.04Eu³⁺ are close to standards of the National Television Standard Committee. Thus, InNbO₄:Eu³⁺ is a promising red-emitting phosphor for white-light emitting diodes.     

Ba3LaNa(PO4)3F:Tm3+, Dy3+: A tunable blue-white color emitting phosphor via energy transfer for UV white LEDs

A series of Tm^3+/Dy^3+co-doped Ba3 LaNa(PO4)3 F(BLNPF) phosphors were synthesized successfully via a high-temperature solid-reaction,and luminescence properties were investigated.Upon near violet excitation,BLNPF:Tm^3+,Dy^3+ phosphors exhibit Tm^3+:^1D2-^3 F4 and Dy^3+:^4 F(9/2)-^6 HJ(J=15/2,13/2,11/2)transitions with diffe rent luminescence intensity.The emitting color of the obtained products was found to shift from blue to white as a result of efficient energy transfer(ET) from Tm^3+to Dy^3+ions.According to photoluminescence emission intensity,the positive effect of activator on ET efficiency was calculated and the maximum ET efficiency was found around 72.6% with Dy^3+ concentration was 0.04.By means of Dexter's theoretical model,furthermore,dipole-dipole interaction was confirmed as the mechanism of energy transfer from Tm^3+ to Dy^3+ ions.The results suggested that BLNPF:Tm^3+,Dy^3+ phosphor might be a promising single-phased white-light-emitting phosphor for UV white-light LED.     

A series of novel metal-ferrocenedicarboxylate coordination polymers: crystal structures, magnetic and luminescence properties

Novel two-dimensional layered lanthanide(III)-ferrocenedicarboxylate coordination polymers {[M(η²-O₂CFcCO₂-η²)(μ₂-η²-O₂CFcCO₂-η²-μ₂)_0.5(H₂O)₂]·mH₂O}_n (Fc=(η⁵-C₅H₄)Fe(η⁵-C₅H₄), M=Tb³⁺, m=2, 1; M=Eu³⁺, m=2, 2; M=Y³⁺, m=1, 3) with trapezium-shaped units and one-dimensional wave-shaped Cd(II)-ferrocenedicarboxylate polymer {[Cd(η²-O₂CFcCO₂-η²)(H₂O)₃]·4H₂O}_n (4) have been prepared and structurally characterized by single crystal diffraction. In polymers 1-3, each central metal ion (Tb(III), or Eu(III) or Y(III)) is located in a pseudo-capped-tetragonal prism coordination geometry, and ferrocenedicarboxylate anion ligands have two coordination modes (bidentate-chelating mode and tridentate-bridging mode). The magnetic behaviors for 1 and 2 are studied in the temperature range of 5.0-300 K. The results show that the paramagnetic behavior of 2 is mainly due to the effective spin-orbital coupling between the ground and excited states through the Zeeman perturbation, and the weak magnetic interaction between Eu³⁺ centers can be observed. In addition, compared with sodium ferrocenedicarboxylate, the fluorescent intensities of the polymers 1-4 are enhanced in the solid state.     

Two- and three-dimensional coordination polymers of lanthanide tartrate: synthesis,crystal structures and luminescence

Several new coordination polymers of lanthanide tartrate with three types of topological structures, namely [Ln₂(DL-tart)₃(H₂O)₃] · 1.5H₂O [Ln = La (1), Nd (2), and Sm (3)], [Ln₂(D-tart)₃(H₂O)₂] · 3H₂O [Ln = Eu (4), Tb (5), and Dy (6)], and [Lu(C₄H₄O₆)(C₄H₅O₆)] · 2.5H₂O (7), have been synthesized by hydrothermal synthesis. X-ray crystallographic analysis reveals that 1 is a unique 3-D network, whereas 5 with a 3-D network and 7 with a 2-D network are isomorphous with their analogs. All lanthanide ions are nine-coordinate through oxygen donors. Four different coordination modes of tartrate occur in these complexes. Luminescence spectra reveal that 4, 5, and 6 emit characteristic luminescence of corresponding lanthanide ions.     

Structural and electronic features important to nπ-ππ inversion sensors: synthesis, luminescence, and electrochemical properties of sulfur and chlorine-containing macrocycles. Part 3

The synthesis and structural characterization of anthraquinone-based luminescence macrocycles containing sulfur and chlorine is reported. Luminescence is dependent on both electronic contributions of the substituted quinone and structural features of the binding site, which effect the inversion of nπ^* and ππ^* states. X-ray crystallographic results of different 1,8-oxybis(ethyleneoxyethyleneoxy)-anthracene-9,10-dione structures is also compared.     

Electronic structure,morphology-controlled synthesis,and luminescence properties of YF3: Eu3+

Journal of Sol-Gel Science and Technology - Studying electronic structure plays a key role in improving the photoluminescence (PL) properties of materials. Therefore, the electronic structure of...     

Homogeneous one-dimensional structured Tb(OH)3:Eu nanorods: Hydrothermal synthesis, energy transfer, and tunable luminescence properties

Nearly monodisperse, homogeneous and well-defined one-dimensional Tb_(1−x)(OH)₃:xEu³⁺ (x=0-3 mol%) nanorods have been prepared through hydrothermal method. The size of the Tb(OH)₃:Eu³⁺ rods could be modulated from nano- to micro-scale by using different amount of ammonia solution. They present highly crystallinity in spite of the moderate reaction temperature. Under ultraviolet excitation into the f→f transition of Tb³⁺ at 382 nm, Tb(OH)₃ samples show the characteristic emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions; whereas Tb(OH)₃:Eu³⁺ samples mainly exhibit the characteristic emission of Eu³⁺ corresponding to ⁵D₀→⁷F_{1, 2, 4} transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺. The PL colors of Tb(OH)₃:xEu³⁺ phosphors can be easily tuned from green, yellow, orange, to red by changing the doping concentration (x) of Eu³⁺.     

Promising oxonitridosilicate phosphor host Sr3Si2O4N2: synthesis, structure, and luminescence properties activated by Eu2+ and Ce3+/Li+ for pc-LEDs

A novel oxonitridosilicate phosphor host Sr(3)Si(2)O(4)N(2) was synthesized in N(2)/H(2) (6%) atmosphere by solid state reaction at high temperature using SrCO(3), SiO(2), and Si(3)N(4) as starting materials. The crystal structure was determined by a Rietveld analysis on powder X-ray and neutron diffraction data. Sr(3)Si(2)O(4)N(2) crystallizes in cubic symmetry with space group Pa ?3, Z = 24, and cell parameter a = 15.6593(1) ?. The structure of Sr(3)Si(2)O(4)N(2) is constructed by isolated and highly corrugated 12 rings which are composed of 12 vertex-sharing [SiO(2)N(2)] tetrahedra with bridging N and terminal O to form three-dimensional tunnels to accommodate the Sr(2+) ions. The calculated band structure shows that Sr(3)Si(2)O(4)N(2) is an indirect semiconductor with a band gap ≈ 2.84 eV, which is close to the experimental value ≈ 2.71 eV from linear extrapolation of the diffuse reflection spectrum. Sr(3-x)Si(2)O(4)N(2):xEu(2+) shows a typical emission band peaking at ~600 nm under 460 nm excitation, which perfectly matches the emission of blue InGaN light-emitting diodes. For Ce(3+)/Li(+)-codoped Sr(3)Si(2)O(4)N(2), one excitation band is in the UV range (280-350 nm) and the other in the UV blue range (380-420 nm), which matches emission of near-UV light-emitting diodes. Emission of Sr(3-2x)Si(2)O(4)N(2):xCe(3+),xLi(+) shows a asymmetric broad band peaking at ~520 nm. The long-wavelength excitation and emission of Eu(2+) and Ce(3+)/Li(+)-doped Sr(3)Si(2)O(4)N(2) make them attractive for applications in phosphor-converted white light-emitting diodes.     

In situ[2 + 3] cycloaddition synthesis,crystal structures,strong SHG responses and fluorescence properties of three novel Zn coordination polymers

We report on the synthesis of two acentric and one centrosymmetric Zn metal-organic complexes with 3-tetrazolenethyl pyridine spacers obtained in situ by hydrothermal routes.X-ray diffraction structural analysis reveals that they have the same equivalent nodes but with dissimilar topologies.The two acentric frameworks[Zn(Tzmp)Cl]n(1)and([Zn(Tzmp)Br]n(2),HTzmp=3-tetrazolemethyl pyridine)are isomorphism which exhibit an acentric 3D framework with(10,3)-b net called"ths",while the centro symmetric complex([Zn(Tzmp)N3]n(3))features a distinctive 2D sheet with Shubnikov hexagonal plane net.Photo-luminescent studies suggest the ligand-field strength of coordinated negative ions(Cl^->Br^->N3^-)has ordered adjusting effects on the emission redshift.The second harmonic generation(SHG)measurement shows that compounds 1 and 2 are nonlinear optically active,with SHG responses being 2/3 and half of the standard potassium dihvdrogen phosphate(KDP),respectively.     

YF3:Ln3+ (Ln = Ce, Tb, Pr) submicrospindles: hydrothermal synthesis and luminescence properties

YF(3):Ln(3+) (Ln = Ce, Tb, Pr) microspindles were successfully fabricated by a facile hydrothermal method. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), lifetimes, photoluminescence (PL) and low-voltage cathodoluminescence (CL) were used to characterize the resulting samples. The lengths and diameters of YF(3):0.02Ce(3+) microspindles are around 760 nm and 230 nm, respectively. Adding dilute acid and trisodium citrate (Cit(3-)) are essential for obtaining YF(3) microspindles. A potential formation mechanism for YF(3) microspindles has been presented. PL spectroscopy investigations show that YF(3):Ce(3+) and YF(3):Tb(3+) microcrystals exhibit the characteristic emission of Ce(3+) 5d → 4f and Tb(3+ 5)D(4)→(7)F(J) (J = 6-3) transitions, respectively. In addition, the energy transfer from Ce(3+) to Tb(3+) was investigated in detail for YF(3):Ce(3+), Tb(3+) microspindles. Under the excitation of electron beams, YF(3):Pr(3+) show quantum cutting emission and YF(3):Ce(3+), Tb(3+) phosphors exhibit more intense green emission than the commercial phosphor ZnO:Zn.     

Low temperature synthesis and luminescence investigations of YAG:Ce,Eu nanocomposite powder for warm white light-emitting diode

The preparation of the cerium and europium co-doped YAG materials as well as the study for their synthesis and emitting mechanism of the energy transfer between Ce³⁺ and Eu³⁺ were investigated in the present study. YAG:Ce³⁺, Eu³⁺ powders were synthesized using a high-energy ball milling method in different sintering temperature and atmosphere: air and H₂/N₂. The effects of the synthesis procedure on the crystallinity, morphology, structure, and luminescence spectra were examined by X-ray diffraction, field emission-scanning electron microscopy, and photoluminescence spectroscopy. The europium co-doped YAG:Ce³⁺ phosphors is improved the chromaticity coordinates.     

A novel coordination polymer based on 2,6-naphthalenedicarboxylic acid: synthesis,crystal structure and luminescence sensing

Transition Metal Chemistry - A novel Cd(II)-based coordination polymer, namely {[Cd3L3(dbp)2]}n (1), was solvothermally prepared based on the rigid ligand 2,6-naphthalenedicarboxylic acid (H2L) and...     

A novel self activated K2XV2O7 (X = Mg and Zn) pyrovanadate green phosphor: Systematic characterization and time resolved photoluminescence

Novel self activated green phosphors; K₂ZnV₂O₇ (KZV) and K₂MgV₂O₇ (KMV) have been prepared and characterized in details. Both KZV and KMV were prepared by solid state reaction and systematically characterized by a number of techniques like X-ray diffraction (XRD), Fourier transformed Infrared (FTIR), Raman spectroscopy, Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), diffuse reflectance spectroscopy (DRS) and time resolved photoluminescence spectroscopy (TRPLS). XRD studies confirm tetragonal melilite type layered phase for both of them. The presence of pyrovanadate group in both is supported by FTIR and Raman spectroscopic investigations. Raman bands of KMV are blue shifted w.r.t to KZV which may be due to shorter bond lengths of MgO compared to ZnO and lower atomic weight of magnesium compared to zinc. DRS measurements indicated the optical band gap of KMV and KZV are 3.14 and 3.12 eV, respectively. Optical measurements on these samples show the emission of green color on ultra violet light irradiation. The origin of such emission is attributed to electronic transition (charge transfer) from filled 2p orbital of oxygen ion (O²⁻) to vacant 3d orbital of vanadium ion (V⁵⁺). In KZV there are dual emission band (PL1 and PL2) which are respectively attributed to ³T₂ → ¹A₁ and ³T₁ → ¹A₁transition, and the emission zone varies slightly compared to KMV. KZV emits bluish green (cool green) where KMV emits in yellowish green (warm green) region. This is indeed an important step towards realization of cost effective rare earth free luminescence material. It is also oberved that PL intensity of KZV is very high compared to KMV which is supported by the lifetime measurements.     

Phase controllable synthesis of unusual -Ga2O3 single crystals with promising luminescence property

A new synthetic approach to unusual -Ga₂O₃ with improved luminescence properties was developed by taking advantage of a microwave-assisted synthesis followed by calcinations at appropriate temperatures. Upon control of crystallinities of GaOOH precursors and the followed calcination temperature, the single crystalline -Ga₂O₃ nanorods can be synthesized in a large scale. The resulting products were characterized by transmission electron microscopy, powder X-ray diffraction, and cathodoluminescence. The luminescence property of this unusual Ga₂O₃ phase was investigated for the first time.     

Tune color of single-phase LiGd(MoO4)2-X(WO4)X: Sm3+, Tb3+ via adjusting the proportion of matrix and energy transfer to create white-light phosphor

A series of LiGd(MO₄)₂: Sm³⁺, Tb³⁺ (M = Mo, W) phosphors was prepared by a conventional solid state reaction method. Powder X-Ray diffraction (XRD) analysis reveals that the compounds are of the same structure type. Their luminescent properties have been studied. The optimal doping concentrations are 8% for Sm³⁺ and 18% for Tb³⁺ in the LiGd(MoO₄)₂ host. Sm³⁺ and Tb³⁺ have different sensitivity to the Mo/W ratio. For LiGd(MoO₄)_2-X(WO₄)_X: Sm³⁺ (X = 0, 0.4, 0.8, 1.2, 1.6, 2.0), the strongest emission intensity is 1.766 times than that of the weakest, while 171 times for LiGd(MoO₄)_2-X(WO₄)_X: Tb³⁺. The experimental results show that Mo/W ratio strong influences on the properties of LiGd(MoO₄)_2-X(WO₄)_X: Tb³⁺. With the increasing of WO₄²⁻ groups concentration, the shape of characteristic excitation peaks of Tb³⁺ is almost the same and the excitation intensity gradually increase. Moreover, the energy transfer from Tb³⁺ to Sm³⁺ has been realized in the co-doped phosphors. The experimental analysis and theoretical calculations reveal that the quadrupole–quadrupole interaction is the dominant mechanism for the Tb³⁺→Sm³⁺ energy transfer. Therefore, luminous intensity can be adjusted by different sensitivities to matrix composition and energy transfer from Tb³⁺→Sm³⁺. By this tuning color method, white-light-emitting phosphor has been prepared. The excitation wavelength is 378 nm, and this indicates that the white-light-emitting phosphor could be pumped by near-UV light.     

Intense white light luminescent Dy3+ doped lithium borate glasses for W-LED: A correlation between physical,thermal, structural and optical properties

In this article the physical, thermal structural and optical properties of Dy³⁺ doped lithium borate glasses have been studied for white LED application. The emission spectra shows two intense emission bands at around 483 nm and 574 nm corresponds to the ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transitions along with one feeble band at 663 nm corresponds to ⁴F_9/2 → ⁶H_11/2 transition. The average lifetime <τ> of Dy³⁺ were found to be about 2.95 and 4.94 ns for blue and yellow emission bands respectively. CIE chromaticity diagram shows glass LBD-4 containing 0.5 mol% Dy₂O₃ with colour co-ordinates x = 0.33 and y = 0.37 have highest emission intensity. These glasses having emission in the white region and thus can be used for bright white LED's and modern white LED bulbs.     

Solvothermal synthesis and luminescence properties of monodisperse Gd2O3:Eu and Gd2O3:Eu@SiO2 nanospheres

A series of uniform, monodispersed Gd(OH)³:Eu³⁺ nanospheres less than 100 nm were successfully synthesized with iron ions as catalyst and DMF as solvent under the solvothermal condition. Cetyltrimethyl ammonium bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as co-surfactant during this facile procedure should be changed as A series of uniform, monodisperse Gd(OH)³:Eu³⁺ nanospheres less than 100 nm in diameter were successfully synthesized with solvothermal method. Iron ion was used as catalyst and Dimethylformamide (DMF) as solvent, Cetyltrimethyl Ammonium Bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as surfactants. Further calcination process was applied to prepare Gd₂O₃:Eu³⁺ nanoshpheres during this facile procedure.     

Cd(II) complexation with 1,1-dithiolate and nitrogen donors: synthesis,luminescence, crystal structure,and antifungal activity study

A new luminescent complex of Cd(II) with 1,1-dicyanoethylene-2,2-dithiolate [i-MNT^2? = {S₂C : C(CN)₂}^2?] with 1,3-diaminopropane (tn) and 4-methyl pyridine (γ-picoline) as secondary ligands has been synthesized and characterized on the basis of spectroscopy and single-crystal X-ray diffraction analysis. Single-crystal X-ray diffraction analysis reveals that cadmium(II) is five coordinate in a 1-D polymer. Biological screening effects in vitro of the synthesized complex has been tested against five fungi Synchytrium endobioticum, Pyricularia oryzae, Helminthosporium oryzae, Candida albicans (ATCC10231), and Trichophyton mentagrophytes by the disk diffusion method. A comparative study of inhibition zone values of K₂i-MNT·H₂O and {[Cd(tn)(iMNT)(4-MePy)]·4H₂O}_n (1) indicates that the complex exhibits antifungal activity, whereas K₂i-MNT·H₂O became silent on S. endobioticum, P. oryzae, H. oryzae, C. albicans (ATCC10231), and T. mentagrophytes.     

Eu2+掺杂MgY2Al3Si2O11N青光荧光粉的制备和发光性能

采用高温固相法合成了一系列Eu²⁺掺杂的Mg Y₂Al₃Si₂O₁₁N(MYASON)青光荧光粉。详细探讨了不同制备方法对荧光粉的物相结构和发光强度的影响,利用X射线衍射精修和X射线光电子能谱实验证明Si⁴⁺-N^3-离子对成功掺入石榴石晶格中。通过荧光光谱、寿命衰减曲线和变温光谱研究了发光性能,研究结果表明,用365 nm紫外光激发MYASON∶Eu²⁺荧光粉时,在青光区域呈现不对称宽带发射,峰值为490 nm,可以为紫外芯片激发的白光发光二极管有效提供青光成分。