Determination of organic and inorganic mercury species in water and sediment samples by HPLC on-line coupled with ICP-MS

This paper describes a preconcentration method for Hg²⁺ and MeHg⁺ in water samples using sodium diethyldithiocarbamate immobilized in polyurethane foam (PU-NaDDC) and an extraction method for several mercury species in sediment samples, including MeHg⁺, EtHg⁺ and PhHg⁺, which is simple, rapid, and uses a single organic solvent. Separation and measurement were done by high-performance liquid chromatography on-line with inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Initially, the test of recovery was applied using procedures compatible with HPLC. Under the optimum extraction conditions, recoveries of 96.7, 96.3 and 97.3% were obtained for MeHg⁺, EtHg⁺, and PhHg⁺, respectively, from n = 4 spiked sediment samples. This study also demonstrates that the combination of solid-phase extraction on PU-NaDDC with HPLC separation and ICP-MS detection is an effective preconcentration procedure for simultaneous measurement of Hg²⁺ and MeHg⁺ at ultra-trace levels in water samples. The application of the proposed procedure to the determination of mercury species in drinking water sample was investigated. The proposed method clearly gave satisfactory average recoveries between 93.7 and 101.5%.     

Rapid IC-ICP/MS method for simultaneous analysis of iodoacetic acids, bromoacetic acids, bromate, and other related halogenated compounds in water

Haloacetic acids (HAAs) and bromate are toxic water disinfection by-products (DBPs) that the U.S. Environmental Protection Agency has regulated in drinking water. Iodoacetic acids (IAAs) are the emerging DBPs that have been recently found in disinfected drinking waters with higher toxicity than their corresponding chloro- and bromo-acetic acids. This study has developed a new rapid and sensitive method for simultaneous analysis of six brominated and four iodinated acetic acids, bromate, iodate, bromide, and iodide using ion chromatography-inductively coupled plasma-mass spectrometry (IC-ICP-MS). Mono-, di- and tri-chloroacetic acids are not detected by this method because the sensitivity of ICP-MS analysis for chlorine is poor. Following IC separation, an Elan DRC-e ICP-MS was used for detection, with quantitation utilizing m/z of 79, 127, and 74 amu for Br, I, and Ge (optional internal standard) species, respectively. Although the primary method used was an external standard procedure, an internal standard method approach is discussed herein as well. Calibration and validation were done in a variety of natural and disinfection-treated water samples. The method detection limits (MDLs) in natural water ranged from 0.33 to 0.72 μg L⁻¹ for iodine species, and from 1.36 to 3.28 μg L⁻¹ for bromine species. Spiked recoveries were between 67% and 123%, while relative standard deviations ranged from 0.2% to 12.8% for replicate samples. This method was applied to detect the bromine and iodine species in drinking water, groundwater, surface water, and swimming pool water.     

沉积物样品中痕量元素汞的形态分析研究进展

归纳总结了沉积物中汞形态分析研究进展,内容包括沉积物汞的赋存形态,样品的预处理和不同形态汞的原子光谱法、色谱法、电感耦合等离子体质谱法及联用技术等分析方法,指出了存在的问题和未来的发展方向。     

Mercury speciation by CE: a review

CE methods for the speciation of inorganic and organomercury compounds are reviewed. Sample preparation, separation conditions and detection modes are discussed. Efficient separation and sensitive determination of mercury species by CE typically involves complexation with various thiols, chromogenic and other chelating agents; however, some methods do not require complexation. Spectrophotometric detection based on UV-visible absorption is by far the most commonly used. Hyphenated techniques, such as CE/inductively coupled plasma (ICP)-MS, hydride generation coupled to ICP-MS or atomic fluorescence spectrometry and CE/atomic absorption spectrometry are gaining popularity due to their high sensitivity and selectivity. Last, but not least, the potential and applications of electrochemical methods for detection of separated mercury species are outlined.     

Uranium pollution of water in the western part of Uzbekistan

Summary Water and phosphorous fertilizer samples from Karakalpakstan in the Republic of Uzbekistan were analyzed by inductively coupled plasma mass spectrometry, (ICP-MS) to demonstrate the water quality in drinking water, rivers and canals. Uranium concentrations exceeded the WHO (2004) guideline levels for drinking water at some sampling points. Since uranium can also have a toxic effect on kidneys, the effect of uranium from drinking water on people in these areas is significant. One of the main pollutant sources is the phosphate fertilizer leached from agriculture land.     

Comparison of methods with respect to efficiencies, recoveries, and quantitation of mercury species interconversions in food demonstrated using tuna fish

Eight different analytical extraction procedures commonly used to extract mercury species from biological samples were evaluated by analyzing Tuna Fish Tissue Certified Reference Material (ERM-CE464) certified for the content of total mercury and methylmercury. Speciated isotope dilution mass spectrometry (SIDMS; US Environmental Protection Agency’s method 6800) was utilized to evaluate and effectively compensate for potential errors during measurement and accurately quantify mercury species using all the extraction methods. SIDMS was used to accurately evaluate species transformations during sample pretreatment, preparation and analysis protocols. The extraction methods tested in this paper were based on alkaline extraction with KOH or tetramethylammonium hydroxide; acid leaching with HCl, HNO₃ or CH₃COOH; extraction with l-cysteine hydrochloride; and enzymatic digestion with protease XIV. Detection of total mercury and mercury species from all extraction methods was carried out by inductively coupled plasma mass spectrometry (ICP-MS) and high-performance liquid chromatography–ICP-MS, respectively. Microwave-assisted extraction and ultrasound-assisted extraction were found to be the most efficient alkaline digestion protocols that caused the lowest levels of transformation of mercury species (6% or less). Extraction with 5 M HCl or enzymatic digestion with protease resulted in the second-highest extraction efficiency, with relatively lower transformation of methylmercury to inorganic mercury (3 and 1.4%, respectively). Despite frequent use of acid leaching for the extraction of mercury species from tuna fish samples, the lowest extraction efficiencies and the highest mercury species transformation were obtained when microwave-assisted extraction with 4 M HNO₃ or CH₃COOH was used. Transformations as high as 30% were found using some literature protocols; however, all the extractions tested produced accurate quantitation when corrected in accordance with the SIDMS method standardized in the US Environmental Protection Agency’s method 6800. Figure Determinative CRM Tuna Fish Tissue Methylmercury Calibration vs. Determinative Calculation.     

Comparison of three methods for measuring 222Rn in drinking water

Three techniques were used to measure ²²²Rn in drinking water: the degassing method followed by counting in an ionisation chamber (IC); gamma spectrometry (GS); and liquid scintillation counting (LSC). Environmental samples were measured in the field using the IC, and the same samples were measured in the laboratory using GS and LSC. The results obtained using the three techniques are compared and discussed in the context of the new Euratom Drinking Water Directive (2013/51/Euratom), which sets out general principles for monitoring radioactive substances such as radon.

     

活性炭富集-电热塞曼原子吸收光谱法测定水中痕量的汞

建立了一种水中痕量汞的测定方法。通过活性炭定量吸附水中痕量汞,采用电热塞曼原子吸收光谱法测定活性炭富集的汞。与目前水中总汞测定方法相比,本方法避免了消解等步骤,减少了汞污染和汞损失,操作更加简单。考察了活性炭粒度、酸处理方法、酸介质和富集时间对富集效率的影响,以及热解温度和干扰离子对方法测定结果的影响。通过空白活性炭加标、空白溶液加标和环境水样加标3种方法制作标准曲线,三者的相关系数达0.9999,经统计检验,3条标准曲线的斜率无差异,表明了在此实验条件下环境水样中的共存物不干扰汞的测定,同时也表明可直接用空白活性炭加标的方法进行标准曲线的绘制。采用本方法对含5和50 ng/L汞的水样进行测定,其相对标准偏差分别为7.2%和4.2%(n=11)。本方法测定下限达到1.2 ng/L。地表水和自来水样中添加10 ng/L汞的加标回收率在92.0%~103.0%之间。用 ICP-MS作对照,二者分析结果相符合,相对误差在2.9%~ 3.4%之间,表明本方法准确可靠、精密度好。     

Method development for the analysis of N-nitrosodimethylamine and other N-nitrosamines in drinking water at low nanogram/liter concentrations using solid-phase extraction and gas chromatography with chemical ionization tandem mass spectrometry

N-nitrosodimethylamine (NDMA) is a probable human carcinogen of concern that has been identified as a drinking water contaminant. U.S. Environmental Protection Agency Method 521 has been developed for the analysis of NDMA and 6 additional N-nitrosamines in drinking water at low ng/L concentrations. The method uses solid-phase extraction with coconut charcoal as the sorbent and dichloromethane as the eluent to concentrate 0.50 L water samples to 1 mL. The extracts are analyzed by gas chromatography-chemical ionization tandem mass spectrometry using large-volume injection. Method performance was evaluated in 2 laboratories. Typical analyte recoveries of 87-104% were demonstrated for fortified reagent water samples, and recoveries of 77-106% were demonstrated for fortified drinking water samples. All relative standard deviations on replicate analyses were < 11%.     

Determination of trace-level haloacetic acids in drinking water by ion chromatography-inductively coupled plasma mass spectrometry

A new method for the determination of nine haloacetic acids (HAAs) with ion chromatography (IC) coupled to inductively coupled plasma mass spectrometry (ICP-MS) was developed. With the very hydrophilic anion-exchange column and steep gradient of sodium hydroxide, the nine HAAs could be well separated in 15 min. After suppression with an ASRS suppressor that was introduced in between IC and ICP-MS, the background was much decreased, the interference caused by sodium ion present in eluent was removed, and the sensitivities of HAAs were greatly improved. The chlorinated and brominated HAAs could be detected as 35ClO and 79Br without interference of the matrix due to the elemental selective ICP-MS. The detection limits for mono-, di-, trichloroacetic acids were between 15.6 and 23.6 microg/l. For the other six bromine-containing HAAs, the detection limits were between 0.34 and 0.99 microg/l. With the pretreatment of OnGuard Ag cartridge to remove high concentration of chloride in sample, the developed method could be applied to the determination of HAAs in many drinking water matrices.     

Characterization of mercury species in soils by HPLC-ICP-MS and measurement of fraction removed by diffusive gradient in thin films

The properties and behaviour of Hg depend on both the oxidation state and the chemical form: the bioavailability, toxicity, persistence and accumulation of mercury in the food web are strongly influenced by chemical speciation. The present work aims to determine the chemical forms of mercury present in soil and to evaluate the fraction of mercury in soil solution available to plants. In order to do this, we analyzed eight samples of contaminated soils with Hg concentrations ranging from 1.31 to 21.7 mg kg⁻¹, collected from different depths (0–10 and 40–50 cm) close to an abandoned industrial site in Val Basento (southern Italy). Two innovative analytical techniques were used: HPLC–ICP-MS and diffusive gradient in thin films (DGT). The analytical procedure was validated using ERM 580-certified sediment and spiked samples in the case of HPLC–ICP-MS, and by a performance test in the case of DGT. In all samples, the only species found in soil and soil solution was MeHg⁺ and Hg²⁺. In soil, the MeHg⁺/Hg_tot ratio ranged from 0.05% to 0.82%; total mercury in soil solution was less than 0.01% of total mercury in soil. The percentage of MeHg⁺ in soil solution varied considerably (from 0% to 50%), with a maximum concentration of 0.02 mg L⁻¹. The root available concentration evaluated by DGT is comparable to the total mercury content of the soil solution measured by HPLC–ICP-MS. The DGT results suggest that all mercury in solution is available for uptake in DGT, and that mercury is supplied from soil to solution. However, for all samples the soluble and root available (DGT-labile) fractions of mercury are generally very low with respect to the total mercury concentration. This study confirmed that both HPLC–ICP-MS and DGT techniques are suitable tools for the estimation of Hg root availability and in assessing the risk from contaminated soils.     

Detoxification of mercury species—an in vitro study with antidotes in human whole blood

To investigate the effects of mercury species intoxication and to test the efficiency of different commonly applied antidotes, human whole blood and plasma surrogate samples were spiked with inorganic mercury (Hg²⁺) and methylmercury (MeHg⁺, CH₃Hg⁺) prior to treatment with the antidotes 2,3-dimercaptopropan-1-ol (British Anti Lewisite), 2,3-dimercaptosuccinic acid (DMSA), and N-acetylcysteine (NAC). For mercury speciation analysis in these samples, liquid chromatography was coupled to either inductively coupled plasma mass spectrometry (ICP-MS) or electrospray ionisation time-of-flight mass spectrometry (ESI-TOF-MS). Adduct formation between mercury species and physiological thiols (cysteine and glutathione) was observed as well as the release of glutathione under treatment with the antidotes DMSA and NAC.     

Determination of mercury in ambient water samples by anodic stripping voltammetry on screen-printed gold electrodes

The applicability of commercial screen-printed gold electrodes (SPGEs) for the determination of Hg(II) in ambient water samples by square wave anodic stripping voltammetry has been demonstrated. Electrode conditioning procedures, chemical and instrumental variables have been optimized to develop a reliable method capable of measuring dissolved mercury in the low ng mL⁻¹ range (detection limit 1.1 ng mL⁻¹), useful for pollution monitoring or screening purposes. The proposed method was tested with the NIST 1641d Mercury in Water Standard Reference Material (recoveries 90.0–110%) and the NCS ZC 76303 Mercury in Water Certified Reference Material (recoveries 82.5–90.6%). Waste water samples from industrial origin and fortified rain water samples were assayed for mercury by the proposed method and by a reference ICP-MS method, with good agreement. Screen printing technology thus opens a useful way for the construction of reliable electrochemical sensors for decentralized or even field Hg(II) testing.     

Simple method of determination of copper,mercury and lead in potable water with preliminary pre-concentration by total reflection X-ray fluorescence spectrometry

Total reflection X-ray fluorescence spectrometry and chemical pre-concentration procedures have been applied for the analysis of trace concentrations of copper, mercury, and lead in drinking water samples. A simple total reflection module has been used in X-ray measurements. The elements under investigation were pre-concentrated by complexation using a mixture of carbamates followed by solvent extraction with methyl isobutyl ketone. The preconcentration procedure was tested with the use of twice-distilled water samples and samples of mineral and tap water spiked with known additions of copper, mercury, and lead. The obtained recovery and precision values are presented. The minimum detection limits for the determination of these elements in mineral and tap water samples were found to be 40 ng l⁻¹, 60 ng l⁻¹, and 60 ng l⁻¹, respectively.     

Determination of ultra-trace amount methyl-, phenyl- and inorganic mercury in environmental and biological samples by liquid chromatography with inductively coupled plasma mass spectrometry after cloud point extraction preconcentration

The cloud point extraction (CPE) preconcentration of ultra-trace amount of mercury species prior to reverse-phase high performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS) detection was studied. Mercury species including methyl-, ethyl-, phenyl- and inorganic mercury were transformed into hydrophobic chelates by reaction with sodium diethyldithiocarbamate, and the hydrophobic chelates were extracted into a surfactant-rich phase of Triton X-114 upon heating in a water bath at 40 °C. Ethylmercury was found partially decomposed during the CPE process, and was not included in the developed method. Various experimental conditions affecting the CPE preconcentration, HPLC separation, and ICP-MS determination were optimized. Under the optimized conditions, detection limits of 13, 8 and 6 ng l⁻¹ (as Hg) were achieved for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. Seven determinations of a standard solution containing the three mercury species each at 0.5 ng ml⁻¹ level produced relative standard deviations of 5.3, 2.3 and 4.4% for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. The developed method was successfully applied for the determination of the three mercury species in environmental water samples and biological samples of human hair and ocean fish.     

Determination of Mercury in Urine and Seawater by Flow Injection Vapor Generation Isotope Dilution Inductively Coupled Plasma Mass Spectrometry

A simple and inexpensive laboratory-built vapor generator was used with inductively coupled plasma mass spectrometry (ICP-MS) for the determination of mercury in urine and seawater samples. The applications of vapor generation ICP-MS alleviated the non-spectroscopic interferences and the sensitivity problem of mercury determination encountered when the conventional pneumatic nebulizer was used for sample introduction. The concentration of mercury was determined by isotope dilution method. The isotope ratio of mercury was calculated from the peak areas of each injection peak. The repeatability of the peak areas and isotope ratio determinations of seven consecutive injections of 1 ng mL^?1 Hg solution were 2.3% and 2.2%, respectively. This method has a detection limit of 0.07 ng mL^?1 for mercury. This method was applied to determine mercury in a CASS-3 nearshore seawater reference sample, NASS-4 open ocean seawater reference sample, NIST SRM 2670 freeze-dried urine reference sample and several urine and seawater samples collected from National Sun Yat-Sen University. The results for the reference samples agreed satisfactorily with the reference values. Results for other samples analyzed by the isotope dilution method and the method of standard additions agreed satisfactorily. Precision was better than 10% for most of the determinations.     

Determination of mercury species in natural waters at picogram level with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS

A new technique has been developed for the determination of methyl-, ethyl-, methoxyethyl-, ethoxyethyl-, phenyl- and inorganic mercury in natural water samples. The mercury compounds have been complexed for the preconcentration on RP C18 columns by sodium pyrrolidinedithiocarbamate (SPDC), sodium diethyldithiocarbamate (SDDC) and hexamethyleneammonium (HMA) — hexamethylenedithiocarbamate (HMDC), separated by HPLC and determined by UV-PCO-CVAAS (ultra violet, post column oxidation, cold vapour atomic absorption spectrometry). The standard deviations are in the range of 6.9 to 11.8%. The recoveries amount to 86%, 78%, 88%, 83%, 79% and 84% for methyl-, ethyl-, methoxyethyl-, ethoxyethyl-, phenyl- and inorganic mercury for the enrichment from 300 ml water samples. The detection limit for methyl mercury is 0.5 ppt. This new on-line preconcentration procedure has been tested with rain, drinking, surface and process water samples.     

Characterization and Use of Copper Solid Amalgam Electrode for Electroanalytical Determination of Triazines‐Based Herbicides

This paper reports the construction, characterization and use of copper solid amalgam electrode in the study of the electrochemical behavior of atrazine and ametryne herbicides by square‐wave voltammetry. This study was used as basis for the development of sensitive analytical methods for the determination of these herbicides in natural water, avoiding the use of mercury, by means of a solid electrode that presents high sensitivity and minimizes any environment contamination with mercury residues. The experimental and voltammetric conditions were evaluated and the results showed a reduction peak for atrazine at ?0.98 and at ?1.1 V vs. Ag/AgCl 3.0 mol L^?1 for ametryne, both with characteristic of an irreversible electrode reaction in an electrochemical diffusion controlled process, involving two electrons for each herbicide reduction. Based on voltammetric studies, it has been demonstrated that the most possible mechanism for the reduction of herbicides involved reduction of bond carbon‐chloride for atrazine and the reduction of bond carbon–SCH₃ for ametryne. The detection limit of herbicides obtained in pure water (laboratory samples) was shown to be lower than the maximum limit of residue established for natural water by the Brazilian Environmental Agency, demonstrating that this methodology is very suitable for determining any contamination by atrazine and ametryne residues in different samples, proving a good substitute for mercury electrodes.     

Contribution to the Development of Indirect Atomic Absorption Methods: Application of the Ion Pair 1,10-phenanthroline-mercury(II)-iodide to Iodide Determination in Water and Infant Formulae Samples

A method to determine iodide is developed, based on the formation of an ion pair between 1, 10-phenanthroline, mercury(II) and iodide that can be selectively extracted into IBMK. When the IBMK layer is analyzed by electrothermal atomic absorption spectrometry (ETAAS) for mercury, iodide can be quantified too. Parameters related to the preparation of the ion pair and to the measuring process are studied. Thus, 7.2–7.4 reveals to be the best pH interval to carry out the extraction, and 250 and 1000?°C, respectively, the mineralization and atomization temperatures for mercury determination by ETAAS. The procedure is applied to drinking tap water and commercial infant formulae milk samples. The accuracy of the method has been investigated by means of the analytical recovery for water samples (mean analytical recovery obtained at different concentration levels 98.1%) and by using the certified reference material BCR CRM No 151 Skim Milk Powder (Spiked) for the infant formulae (results within certification interval). The repeatability of the measurements at different concentration levels gave a RSD lower than 10% for both types of samples and the repeatability of the whole procedure for infant formulae shows a RSD of 1.33%. In addition, the limits of detection and quantification were 2.5?μg/L and 8.5?μg/L, respectively, for drinking water and 1.1?μg/g and 3.8?μg/g, respectively, for infant formulae.     

Comparison of standard and reaction cell inductively coupled plasma mass spectrometry in the determination of chromium and selenium species by HPLC-ICP-MS

Elemental speciation is becoming a common analytical procedure for geochemical investigations. The various redox species of environmentally relevant metals can have vastly different biogeochemical properties, including sorption, solubility, bioavailability, and toxicity. The use of high performance liquid chromatography (HPLC) coupled to elemental specific detectors, such as inductively coupled plasma mass spectrometry (ICP-MS), has become one of the most important speciation methods employed. This is due to the separation versatility of HPLC and the sensitive and selective detection capabilities of ICP-MS. The current study compares standard mode ICP-MS to recently developed reaction cell (RC) ICP-MS, which has the ability to remove or reduce many common polyatomic interferences that can limit the ability of ICP-MS to quantitate certain analytes in complex matrices. Determination of chromium and selenium redox species is achieved using ion-exchange chromatography with elemental detection by standard and RC-ICP-MS, using various chromium and selenium isotopes. In this study, method performance and detection limits for the various permutations of the method (isotope monitored or ICP-MS detection mode) were found to be comparable and generally less than 1 μg L⁻¹. The method was tested on synthetic laboratory samples, surface water, groundwater, and municipal tap water matrices.