A design of shape memory networks of poly(ε‐caprolactone)s via POSS‐POSS interactions

In this contribution, we reported a design of shape memory networks of poly(ε‐caprolactone)s (PCLs) via POSS‐POSS interactions. First, a series of novel organic‐inorganic PCL stars with polyhedral oligomeric silsesquioxane (POSS) termini were synthesized via the combination of ring‐opening polymerization of ε‐caprolactone and the copper (I)‐catalyzed cycloaddition of alkynyl with azido groups. It was found that the organic‐inorganic PCL stars significantly displayed shape memory properties with about 100% of recovery. The morphological observation showed that in the organic‐inorganic PCL stars, the POSS cages at the ends of PCL chains were self‐organized into the spherical POSS microdomains with the size of 10 to 20 nm in diameter. The POSS microdomains behaved as the netpoints, resulting in the formation of physically crosslinked networks. The novel physically crosslinked networks endowed the organic‐inorganic nanocomposites with shape memory properties.     

Organic–inorganic polyurethanes with double decker silsesquioxanes in the main chains: Morphologies,surface hydrophobicity,and shape memory properties

In this contribution, we reported an investigation of the morphologies, surface hydrophobicity, and shape memory properties of the organic–inorganic polyurethanes with double decker silsesquioxane (DDSQ) in the main chains. It was found that the organic–inorganic polyurethanes were microphase‐separated and that the POSS cages in the main chains were self‐organized into the spherical microdomains with the size of 10–50 nm in diameter. The introduction of POSS cages into the main chains resulted in the enhancement of glass transition temperatures (T_g's). In the meantime, the surface dewettability of the materials was significantly enhanced. X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) indicates the improvement of the surface hydrophobicity resulted from the enrichment of POSS at the surfaces of the polyurethanes. The mechanical analyses, such as dynamic mechanical analysis (DMA) and creep‐recovery analysis (CRA), indicate that the POSS microdomains dispersed in the polyurethanes behaved as the physical crosslinking sites and promoted the formation of the crosslinked networks. Owing to the introduction of DDSQ into the main chains, the organic–inorganic polyurethanes significantly displayed shape memory properties, in marked contrast to the unmodified and linear polyurethane. The shape memory behavior has been addressed on the formation of the strong physically crosslinked networks in the organic–inorganic polyurethanes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 893–906     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600     

Poly(ethylene imine) hybrids containing polyhedral oligomeric silsesquioxanes: Preparation, structure and properties

Both octaglycidyletherpropyl polyhedral oligomeric silsesquioxane and hepta(3,3,3-trifluoropropyl)glycidyletherpropyl polyhedral oligomeric silsesquioxane were synthesized via the hydrosilylation reactions between octahydrosilsesquioxane [and/or hepta(3,3,3-trifluoropropyl)hydrosilsesquioxane] and allyl glycidyl ether. The polyhedral oligomeric silsesquioxane (POSS) macromers were characterized by means of Fourier transform infrared and nuclear magnetic resonance spectroscopy. The inter-component macromolecular reactions between the POSS macromers and poly(ethylene imine) (PEI) were employed to prepare the POSS-containing organic-inorganic PEI hybrids. The inclusion of octaglycidyletherpropyl POSS into PEI results in the formation of the organic-inorganic hybrid networks whereas the introducing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS to PEI affords the linear POSS-grafted PEI copolymers. Differential scanning calorimetry and thermogravimetric analysis show that the POSS-containing PEI hybrids displayed increased glass transition temperatures (T_g’s) and enhanced thermal stability compared to the plain PEI. These PEI hybrid composites can be significantly swollen with water without dissolving, suggesting the formation of hydrogels. The PEI hydrogels containing octaglycidyletherpropyl POSS is in reality the chemically-crosslinked hydrogels whereas the those containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS displayed the behavior of physical hydrogels. The formation of physical hydrogels is ascribed to the microphase-separated morphology in the hybrids. In addition, the hybrids containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS exhibited the typical amphiphilicity as evidenced by the increase in surface hydrophobilicity.     

Lateral sol–gel cross-linking of polyurethane using the a grafted triethoxysilyl group

3-Triethoxysilylpropyl isocyanate was used to graft a triethoxysilyl group to polyurethane (PU), and the grafted triethoxysilyl groups were used to cross-link PU chains through a sol–gel process. The soft segment melting temperature and enthalpy change were not significantly altered by the sol–gel cross-linking. The sol–gel cross-linked PUs exhibited significantly increased tensile strength and better tensile strain compared to the plain linear PU: the maximum stress and strain increased to 41 MPa and 1,972 %, respectively. Control series containing tetraethyl orthosilicate, a series without cross-linking, was also prepared for comparison with the sol–gel cross-linked PU series. The control series did not exhibit the increased tensile strength shown by the sol–gel cross-linked PU series. The cyclic shape memory tests demonstrated that the shape recovery was as high as 97 %, and both shape recovery and shape retention remained high after the four repeated tests. The sol–gel cross-linked PU series exhibited enhanced low-temperature flexibility compared to the plain linear PU due to the flexible silyl cross-linking group.     

Comparative studies on performance of radiation-induced and thermal cross-linked ion-exchange membrane for water electrolysis

Radiation-induced and thermal cross-linked sulfonated poly(ether sulfone) (SPS)–sulfonated poly(ether ether ketone) (SPK) composite ion-exchange membranes (SPS/SPK(γ) and SPS/SPK(T), respectively) were prepared. Their performances for water electrolysis were comparatively assessed. Thermal cross-linked membrane (SPS/SPK(T)) showed cross-linking of part functional groups (–SO₃H) and thus deterioration in membrane conductivity. While, radiation-induced cross-linked membrane (SPS/SPK(γ)) avoided any cross-linking between functional groups and thus conductivity. Electrolysis performances of these membranes were evaluated in comparison with Nafion117 membrane. Relatively low current efficiency (CE) for SPS/SPK and SPS/SPK(T) membranes was due to their high mass transfer (water) via electro-osmotic drag, which was negligible for SPS/SPK(γ) membrane. SPS/SPK(γ) membrane exhibited comparable stabilities and water splitting performance with Nafion117 membrane, which revealed its suitability as substitute for electrochemical applications.     

Cross-linked and functionalized ‘universal polymer backbones’ via simple, rapid, and orthogonal multi-site self-assembly

A novel route to cross-linked and functionalized random copolymers using a rapid, one-step, and orthogonal copolymer cross-linking/functionalization strategy has been developed. Random terpolymers possessing high concentrations of pendant alkyl chains and either (1) palladated-pincer complexes and diaminopyridine moieties (DAD hydrogen-bonding entities) or (2) palladated-pincer complexes and cyanuric wedges (ADAADA hydrogen-bonding entities) have been synthesized using ring-opening metathesis polymerization. Non-covalent cross-linking of the resultant copolymers using a directed functionalization strategy leads to dramatic increases in solution viscosities for cross-linked polymers via metal-coordination while only minor changes in viscosity were observed when hydrogen-bonding motifs were employed for cross-linking. The cross-linked materials could be further functionalized via self-assembly by employing the second recognition motif along the polymeric backbones giving rise to highly functionalized materials with tailored cross-links. This novel non-covalent polymer cross-linking/functionalization strategy allows for rapid and tunable materials synthesis by overcoming many difficulties inherent to the preparation of covalently cross-linked polymers.     

Synthesis of polyethylene hybrid copolymers containing polyhedral oligomeric silsesquioxane prepared with ring‐opening metathesis copolymerization

Ring‐opening metathesis copolymerizations of cyclooctene and the polyhedral oligomeric silsesquioxane (POSS) monomer 1‐[2‐(5‐norbornen‐2‐yl)ethyl]‐3,5,7,9,11,13,15‐heptacyclopentylpentacyclo[9.5.1.1^3,9.1^5,15.1^7,13] octasiloxane (POSS–norbornylene) were performed with Grubbs's catalyst, RuCl₂(?CHPh)(PCy₃)₂. Random copolymers were formed and fully characterized with POSS loadings as high as 55 wt %. Diimide reduction of these copolymers afforded polyethylene–POSS random copolymers. Thermogravimetric analysis of the polyethylene–POSS copolymers under air showed a 70 °C improvement, relative to a polyethylene control sample of similar molecular weight, in the onset of decomposition temperature based on 5% mass loss. The homopolymer of POSS–norbornylene was also synthesized. This polymer had a rigid backbone according to ¹H NMR evidence of broad olefinic signals. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2920–2928, 2001     

Organic nanoparticles whose size and rigidity are finely tuned by cross-linking the end groups of dendrimers

Dendrimers with molecular weights ranging from ca. 2700 to 11 000 and from 16 to 64 homoallyl ether end groups were cross-linked using the Grubbs ring-closing metathesis reaction. A combination of SEC, MALDI-TOF-MS, and AFM were used to characterize the cross-linked nanoparticles. The data suggest a significant decrease in volume with cross-linking and a concomitant increase in rigidity, both of which can be controlled independently with a fair degree of precision.     

Block Copolymer Networks Composed of Poly(ε-caprolactone) and Polyethylene with Triple Shape Memory Properties

In this contribution, we reported a novel synthesis of block copolymer networks composed of poly(ε-caprolactone)(PCL) and polyethylene(PE) via the co-hydrolysis and condensation of α,ω-ditriethoxylsilane-terminated PCL and PE telechelics. First, α,ω-dihydroxylterminated PCL and PE telechelics were synthesized via the ring-opening polymerization of ε-caprolactone and the ring-opening metathesis polymerization of cyclooctene followed by hydrogenation of polycyclooctene. Both α,ω-ditriethoxylsilane-terminated PCL and PE telechelics were obtained via in situ reaction of α,ω-dihydroxyl-terminated PCL and PE telechelics with 3-isocyanatopropyltriethoxysilane. The formation of networks was evidenced by the solubility and rheological tests. It was found that the block copolymer networks were microphase-separated. The PCL and PE blocks still preserved the crystallinity. Owing to the formation of crosslinked networks, the materials displayed shape memory properties. More importantly, the combination of PCL with PE resulted that the block copolymer networks had the triple shape memory properties, which can be triggered with the melting and crystallization of PCL and PE blocks. The results reported in this work demonstrated that triple shape memory polymers could be prepared via the formation of block copolymer networks.     

Ring‐opening metathesis copolymerization of cyclooctene and a carborane‐containing oxanorbornene

The incorporation of a silyl‐protected oxanorbornene imide carborane (SONIC) in polyethylene‐like materials is reported. These copolymers were obtained via ring‐opening metathesis copolymerization of (SONIC) and cyclooctene followed by hydrogenation with p‐toluenesulfonylhydrazide. The composition of the copolymer was varied by altering the feed ratio. Structural and thermal properties were investigated and compared with that of a model polymer so as to gauge the impact on the inclusion of the silyl‐functionalized carborane. An initial observation of the modification of the chain sequence upon changing solvent polarity is also discussed. Finally, the potential utilization of these materials as radiation shielding materials is mentioned. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2557–2563, 2010     

New pH-Sensitive Hydrogels for Oral Delivery of Hydrophobic Drugs

A series of acrylic copolymers containing silyl pendant groups was prepared by free radical cross-linking copolymerization. Me₃Si, Et₃Si, and Ph₃Si together with cubane-1,4-dicarboxylic acid (CDA) were covalently linked with 2-hydroxyethyl methacrylate (HEMA). CDA linked to two HEMA group is the cross-linking agent (CA). Free radical cross-linking copolymerization of the methacrylic acid (MAA) and organosilyl monomers with two different molar ratios of CA was carried out at 60–70°C. The compositions of the cross-linked three-dimensional polymers were determined by FT-IR spectroscopy. The glass transition temperature of the network polymers was determined calorimetrically. Equilibrium swelling studies were carried out in enzyme-free simulated gastric and intestinal fluids (SGF and SIF, respectively). A model hydrophobic drug, the steroid hormone estradiol, was entrapped in these gels, and the in vitro release profiles were established separately in both SGF (pH 1) and SIF (pH 7.4). Incorporation of silyl groups in a new macromolecule system modified network polymers for drug delivery.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

A robust and efficiently reprocessable poly(dimethylsiloxane) elastomers enhanced by self-catalysis Zn(II)-ligand bonds and silyl ethers

In recent years, as an emerging dynamic bonding, silyl ether linkages have been concerned and applied. However, the reprocessability of vitrimers based on it is far from satisfactory because of the inactive dynamic exchange reaction. At the same time, the mechanical properties of polysiloxane elastomers are poor because of the high flexibility of polysiloxane molecular chains and weak intermolecular forces. Herein, we have successfully synthesized a PDMS elastomer incorporating Zn(II)-amine coordination bonds as sacrificial units, which are crosslinked through dynamic silyl ether linkages. Importantly, the presence of Zn ions promotes the exchange between the silyl ether linkages and hydroxyl groups. The elastomers exhibited excellent mechanical properties (35 times improvement in toughness) and outstanding reprocessability. The mechanical property recovery of the PDMS elastomers reached approximately 90% after four reprocessing cycles. Meanwhile, small-molecule simulation experiments were conducted to verify the significant catalytic effect of Zn (II) ions as Lewis acid catalysts on the exchange reaction of silyl ether linkages and hydroxyl groups. In a word, this work provides a facile strategy to simultaneously enhance the mechanical properties and reprocessing performance of silyl ether-linked polysiloxane elastomers.     

Organic/inorganic hybrid star-shaped block copolymers of poly(l-lactide) and poly(N-isopropylacrylamide) with a polyhedral oligomeric silsesquioxane core: Synthesis and self-assembly

The star-shaped organic/inorganic hybrid poly(l-lactide) (PLLA) based on polyhedral oligomeric silsesquioxane (POSS) was prepared using octa(3-hydroxypropyl) polyhedral oligomeric silsesquioxane as initiator via ring-opening polymerization (ROP) of l-lactide (LLA). The molecular weight of POSS-containing star-shaped hybrid PLLA (POSSPLLA) can be well controlled by the feed ratio of LLA to initiator. The POSSPLLA was further functionalized into the macromolecular reversible addition-fragmentation transfer (RAFT) agent for the polymerization of N-isopropylacrylamide (NIPAM), leading to the POSS-containing star-shaped organic/inorganic hybrid amphiphilic block copolymers, poly(l-lactide)–block–poly(N-isopropylacrylamide) (POSS(PLLA–b–PNIPAM)). The self-assembly behavior of POSS(PLLA–b–PNIPAM) block copolymers in aqueous solution was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). DLS showed the PNIPAM block in the aggregates is temperature-responsive and its phase-transition is reversible. TEM proved that the star-shaped POSS(PLLA–b–PNIPAM) amphiphilic block copolymers can self-assemble into the vesicles in aqueous solution. The vesicular wall and coronas are composed of the hydrophobic POSS core and PLLA, and hydrophilic PNIPAM blocks, respectively. Therefore, POSSPLLA and POSS(PLLA–b–PNIPAM) block copolymers, as a class of novel organic–inorganic hybrid materials with the advantageous properties, can be potentially used in biological and medical fields.     

Synthesis and properties of hybrid materials obtained via additive cross-linking of liquid polybutadiene rubber with H-Si containing reagents

Herein, we present the results describing the synthesis and thermal, mechanical and surface properties of liquid polybutadiene rubber cross-linked with organosilicon reactants. The differences in the structure of cross-linking agents, as well as a number of reactive H-Si species, have a significant impact on the above-mentioned properties of synthesized via Rh(I) catalyzed additive cross-linking of hybrid organic-inorganic coatings.     

Nanocomposites through copolymerization of a polyhedral oligomeric silsesquioxane and methyl methacrylate

The mechanical properties and thermal stability of polymers can be enhanced through the formation of nanocomposites. Nanocomposites consisting of hybrid copolymers of methacrylcyclohexyl polyhedral oligomeric silsesquioxane (POSS‐1) and methyl methacrylate (MMA) with up to 92 wt % (51 mol %) POSS‐1 and with superior thermal properties were synthesized using solution polymerization. The POSS‐1 contents of the copolymers were similar to or slightly higher than those in the feeds, the polydispersity indices were relatively low, and the degree of polymerization decreased with increasing POSS‐1 content. POSS‐1 enhanced the thermal stability, increasing the degradation temperature, reducing the mass loss, and preventing PMMA‐like degradation from propagating along the chain. The mass loss was reduced in a high POSS‐1 content copolymer since the polymerization of POSS‐1 with itself reduced sublimation. Exposure to 450 °C produced cyclohexyl‐POSS‐like remnants in the POSS‐1 monomer and in all the copolymers. The degradation of these remnants, for the copolymers and for the POSS‐1 monomer, yielded 75% SiO₂ and an oxidized carbonaceous residue. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4264–4275, 2007     

Synthesis and microphase separation behavior of random,mixed cylindrical brush copolymers bearing polystyrene and poly(<Emphasis Type="Italic">ε</Emphasis>-caprolactone) side chains

A series of mixed, random cylindrical brush copolymers bearing polystyrene (PS) and poly(ε-caprolactone) (PCL) side chains were synthesized via the combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). These novel cylindrical brush copolymers have been characterized by means of nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). It was found that the mikto-armed cylindrical brush copolymers were microphase-separated in bulks and that the morphologies were dependent on the mass ratios of PS to PCL side chains. One of the cylindrical brush copolymers was employed to incorporate into epoxy thermoset to investigate effect of the mikto-armed cylindrical brush architecture on the reaction-induced microphase separation behavior. Depending on the concentration of the cylindrical brush in epoxy, the thermosets can display the morphologies with the spherical, worm-like and lamellar PS microdomains dispersing in continuous thermosetting matrices.     

Effect of comonomer on thermal/mechanical and shape memory property of L‐lactide‐based shape‐memory copolymers

In this study, three kinds of L ‐lactide‐based copolymers, poly(lactide‐co‐glycolide) (PLGA), poly(lactide‐co‐p‐dioxanone) (PLDON) and poly(lactide‐co‐caprolactone) (PLC), were synthesized by the copolymerization of L ‐lactide (L) with glycolide (G), or p‐dioxanone (DON) or ε‐caprolactone (CL), respectively. The copolymers were easily soluble in common organic solvents. The compositions of the copolymers were determined by ¹H‐NMR. Thermal/mechanical and shape‐memory properties of the copolymers with different comonomers were compared. Moreover, the effect of the chain flexibility of the comonomers on thermal/mechanical and shape‐memory properties of the copolymers were investigated. The copolymers with appropriate lactyl content showed good shape‐memory properties where both the shape fixity rate (R_f)and the shape recovery rate (R_r) could exceed 95%. It was found that the comonomers with different flexible molecular chain have different effects on their thermal/mechanical and shape‐memory properties. Among them, PLGA has the highest mechanical strength and recovery rate while PLC copolymer has high recovery rate when the lactyl content exceeded 85% and the lowest transition temperature (T_trans). Copyright © 2007 John Wiley & Sons, Ltd.     

High strength,epoxy cross-linked high sulfur content polymers from one-step reactive compatibilization inverse vulcanization

Inverse vulcanization provides a simple, solvent-free method for the preparation of high sulfur content polymers using elemental sulfur, a byproduct of refining processes, as feedstock. Despite the successful demonstration of sulfur polymers from inverse vulcanization in optical, electrochemical, and self-healing applications, the mechanical properties of these materials have remained limited. We herein report a one-step inverse vulcanization using allyl glycidyl ether, a heterobifunctional comonomer. The copolymerization, which proceeds via reactive compatibilization, gives an epoxy cross-linked sulfur polymer in a single step, as demonstrated through isothermal kinetic experiments and solid-state ¹³C NMR spectroscopy. The resulting high sulfur content (≥50 wt%) polymers exhibited tensile strength at break in the range of 10–60 MPa (70–50 wt% sulfur), which represents an unprecedentedly high strength for high sulfur content polymers from vulcanization. The resulting high sulfur content copolymer also exhibited extraordinary shape memory behavior along with shape reprogrammability attributed to facile polysulfide bond rearrangement.

A one-step bulk polymerization between elemental sulfur and allyl glycidyl ether yields epoxy cross-linked sulfur polymers with unprecedentedly high mechanical strength and rapid shape-memory performance.     

Precision branching in ethylene copolymers: Synthesis and thermal behavior

Acyclic diene metathesis polymerization allows the synthesis of sequenced polyethylene copolymers via step-growth propagation, thereby avoiding the inherent side reactions associated with chain polymerization. Here we review the synthesis and thermal behavior of ADMET polyethylene (PE) as well as ethylene/propylene (EP), ethylene/butene (EB), ethylene/octane (EO), and ethylene/vinyl ether (EVE) copolymers prepared by ADMET. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4981–4989, 2006