Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

A Photochemical Route towards Metal Sulfide Nanosheets from Layered Metal Thiolate Complexes

Synthesizing nanomaterials with anisotropic architectures, especially two‐dimensional (2D) nanosheets (NSs), is a key focus of materials science research. Metal sulfide nanosheets (MSNSs) are typically obtained involving exfoliation of bulk metal sulfides with layered structures. The synthesis of NSs of intrinsically non‐layered metal sulfides has received relatively less attention. Metal alkanethiolates with lamellar structures are now shown to serve as effective scaffolds for constructing NSs. A novel photochemical step was employed to transform 2D metal thiolates into MSNSs. By this strategy the 2D nature of metal thiolate precursors was preserved in the final products, resulting in the successful synthesis of NSs of binary PbS, CdS, and Cu₉S₅, as well as ternary wurtzite CuInS₂, Cu₂SnS₃. Results encourage the wider utilization of photochemical strategies in the synthesis of anisotropic MSNSs.     

二维纳米片层孔洞化策略及组装材料在超级电容器中的应用

功率密度高、倍率性能优异和循环性能好等特性使得超级电容器在储能领域显示了巨大的应用前景。尽管二维层状材料剥离形成的纳米片层不仅可为电化学反应提供独特的纳米级反应空间,而且由其组装的层状纳米电极材料具有化学和结构上的氧化还原可逆性及纳米片层水平方向上离子或电子快速传输通道。但是,纳米片层组装电极材料在纳米片层垂直方向上离子或电子传输存在障碍,对于超级电容器功率密度和能量密度的提高及实现快速能量储存非常不利。因此,如何通过改善离子或电子的快速传输,实现超级电容器大功率密度下的高能量密度是超级电容器电极材料发展的方向之一。本文主要综述了二维层状材料剥离成纳米片层,纳米片层孔洞化策略及组装孔洞化材料在超级电容器电极材料中的应用。纳米层孔洞化技术是改善层状电极材料在纳米片层垂直方向离子或电子传输的有效手段,为实现高比电容下的高倍率性能超级电容器电极材料制备提供了方法学。最后,对开发大功率密度下的高能量密度超级电容器电极材料提出了展望。     

Metal Oxide Nanosheets as 2D Building Blocks for the Design of Novel Materials

Research into 2-dimensional materials has soared during the last couple of years. Next to van der Waals type 2D materials such as graphene and h-BN, less well-known oxidic 2D equivalents also exist. Most 2D oxide nanosheets are derived from layered metal oxide phases, although few 2D oxide phases can be also made by bottom-up solution syntheses. Owing to the strong electrostatic interactions within layered metal oxide crystals, a chemical process is usually needed to delaminate them into their 2D constituents. This Review article provides an overview of the synthesis of oxide nanosheets, and methods to assemble them into nanocomposites, mono- or multilayer films. In particular, the use of Langmuir–Blodgett methods to form monolayer films over large surface areas, and the emerging use of ink jet printing to form patterned functional films is emphasized. The utilization of nanosheets in various areas of technology, for example, electronics, energy storage and tribology, is illustrated, with special focus on their use as seed layers for epitaxial growth of thin films, and as electrochemically active electrodes for supercapacitors and Li ion batteries.     

Composition‐Tailored 2 D Mn1−xRuxO2 Nanosheets and Their Reassembled Nanocomposites: Improvement of Electrode Performance upon Ru Substitution

Composition‐tailored Mn_1?xRu_xO₂ 2 D nanosheets and their reassembled nanocomposites with mesoporous stacking structure are synthesized by a soft‐chemical exfoliation reaction and the subsequent reassembling of the exfoliated nanosheets with Li⁺ cations, respectively. The tailoring of the chemical compositions of the exfoliated Mn_1?xRu_xO₂ 2 D nanosheets and their lithiated nanocomposites can be achieved by adopting the Ru‐substituted layered manganese oxides as host materials for exfoliation reaction. Upon the exfoliation–reassembling process, the substituted ruthenium ions remain stabilized in the layered Mn_1?xRu_xO₂ lattice with mixed Ru³⁺/Ru⁴⁺ oxidation state. The reassembled Li–Mn_1?xRu_xO₂ nanocomposites show promising pseudocapacitance performance with large specific capacitances of approximately 330 F g^?1 for the second cycle and approximately 360 F g^?1 for the 500th cycle and excellent cyclability, which are superior to those of the unsubstituted Li–MnO₂ homologue and many other MnO₂‐based materials. Electrochemical impedance spectroscopy analysis provides strong evidence for the enhancement of the electrical conductivity of 2 D nanostructured manganese oxide upon Ru substitution, which is mainly responsible for the excellent electrode performance of Li–Mn_1?xRu_xO₂ nanocomposites. The results underscore the powerful role of the composition‐controllable metal oxide 2 D nanosheets as building blocks for exploring efficient electrode materials.     

Controllable Synthesis of Few‐Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance

Two‐dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few‐layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO₂ reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co‐existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier‐transformed alternating current voltammetry (FTacV) are attributed to CO₂ reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO₂^.? is the rate determining step for bismuth catalysed CO₂ reduction.     

Redox-Reversible 2D Metal–Organic Framework Nanosheets (MONs) Based on the Hydroquinone/Quinone Couple

2D metal–organic nanosheets (MONs), akin to graphene, have aroused immense contemporary interest. In our quest to develop functional 2D MONs based on organic linkers designed de novo, we reasoned that benzene-tetrabenzoic acid, which has been exploited tremendously in the construction of pillared metal–organic frameworks (MOFs), could be maneuvered readily to access redox-active MONs based on the benzoquinone/hydroquinone redox couple. Herein, we show that the self-assembly of 2,3,5,6-tetrakis(p-carboxyphenyl)hydroquinone H₄BTA with Zn(NO₃)₂ does lead to 2D metal–organic nanosheets that stack down the y axis, affording a layered Zn MOF. Although the crystals of the latter do not exhibit a discernible chemically induced redox switching behavior, the 2D MONs accessed by ultrasound-induced liquid-phase exfoliation (UILPE) lend themselves to a facile redox switching behavior. Treatment of a dispersion of the 2D MONs in methanol with phenyliodine(III) diacetate (PIDA) results in the oxidation of the hydroquinone core to benzoquinone. Remarkably, the latter can be reverted to the former by treatment with ascorbic acid as a reducing agent; indeed, the redox process can be made out by the naked eye. The results constitute the first example of chemically induced redox switching of 2D MONs. In view of emergent applications of 2D materials in general and MONs in particular, for example, improvement of the performance of membranes in separations by doping with MONs, the redox-switchable property may lead to the development of unique materials with heretofore unexplored potential.     

The Rapid Exfoliation and Subsequent Restacking of Layered Titanates Driven by an Acid–Base Reaction

Two‐dimensional (2D) (hydro)oxide materials, that is, nanosheets, enable the preparation of advanced 2D materials and devices. The general synthesis route of nanosheets involves exfoliating layered metal (hydro)oxide crystals. This exfoliation process is considered to be time‐consuming, hindering their industrial‐scale production. Based on in situ exfoliation studies on the protonated layered titanate H_1.07Ti_1.73O₄?H₂O (HTO), it is now shown that ion intercalation‐assisted exfoliation driven by chemical reaction provides a viable and fast route to isolated nanosheets. Contrary to the general expectation, data indicate that direct exfoliation of HTO occurs within seconds after mixing of the reactants, instead of proceeding via a swollen state as previously thought. These findings reveal that ion intercalation‐assisted exfoliation driven by chemical reaction is a promising exfoliation route for large‐scale synthesis.     

Graphene Nanosheets as a Platform for the 2D Ordering of Metal Oxide Nanoparticles: Mesoporous 2D Aggregate of Anatase TiO2 Nanoparticles with Improved Electrode Performance

Graphene nanosheets are successfully applied as an effective platform for the 2D ordering of metal oxide nanoparticles. Mesoporous 2D aggregates of anatase TiO₂ nanoparticles are synthesized by the heat treatment of the uniformly hybridized nanocomposite of layered titanate–reduced graphene oxide (RGO) at elevated temperatures. The precursor layered titanate–RGO nanocomposite is prepared by self‐assembly of anionic RGO nanosheets and cationic TiO₂ nanosols. The calcination of the as‐prepared layered titanate–RGO nanocomposite at 500 °C induces a structural and morphological change of layered titanate nanoplates into anatase TiO₂ nanoparticles without significant modification of the RGO nanosheet. Increasing the heating temperature to 600 °C gives rise to elimination of the RGO component, leading to the formation of sheetlike porous aggregates of RGO‐free TiO₂ nanoparticles. The nanocomposites calcined at 500–700 °C display promising functionality as negative electrodes for lithium ion batteries. Among the present calcined derivatives, the 2D sheet‐shaped aggregate of TiO₂ nanoparticles obtained from calcination at 600 °C delivers the greatest specific discharge capacity with good capacity retention for all current density conditions applied. Such superior electrode performance of the nanocomposite calcined at 600 °C is attributable both to the improved stability of the crystal structure and crystal morphology of titania and to the enhancement of Li⁺ ion transport through the enlargement of mesopores. The present findings clearly demonstrate the usefulness of RGO nanosheets as a platform for 2D‐ordered superstructures of metal oxide nanoparticles with improved electrode performance.     

TiS2原子薄膜厚度对其热电性质影响的理论研究

本文采用玻尓兹曼输运方程与密度泛函计算相结合的方法,理论研究了薄膜厚度对二维TiS₂原子薄膜热电性能的影响。随着厚度的减小,薄膜的能带变平,电子有效质量增大而群速度减小,这造成了塞贝克系数的增大和电导率的减小。而且,薄膜的功率因子及最优载流子浓度也随厚度的减小而减小。我们讨论了薄膜功率因子减小的物理机制,并与其他二维体系的实验结果进行了比较分析。     

TiS_2原子薄膜厚度对其热电性质影响的理论研究

本文采用玻尓兹曼输运方程与密度泛函计算相结合的方法,理论研究了薄膜厚度对二维TiS2原子薄膜热电性能的影响。随着厚度的减小,薄膜的能带变平,电子有效质量增大而群速度减小,这造成了塞贝克系数的增大和电导率的减小。而且,薄膜的功率因子及最优载流子浓度也随厚度的减小而减小。我们讨论了薄膜功率因子减小的物理机制,并与其他二维体系的实验结果进行了比较分析。     

A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction

Metal–organic framework (MOFs) two‐dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top‐down or bottom‐up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF‐74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top‐down) or the conventional solvothermal method (bottom‐up). The ultrathin iron–cobalt MOF‐74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF‐74 particles and the state‐of‐the‐art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.     

Two‐Dimensional Fullerene Assembly from an Exfoliated van der Waals Template

Two‐dimensional (2D) materials are commonly prepared by exfoliating bulk layered van der Waals crystals. The creation of synthetic 2D materials from bottom‐up methods is an important challenge as their structural flexibility will enable chemists to tune the materials properties. A 2D material was assembled using C₆₀ as a polymerizable monomer. The C₆₀ building blocks are first assembled into a layered solid using a molecular cluster as structure director. The resulting hierarchical crystal is used as a template to polymerize its C₆₀ monolayers, which can be exfoliated down to 2D crystalline nanosheets. Derived from the parent template, the 2D structure is composed of a layer of inorganic cluster, sandwiched between two monolayers of polymerized C₆₀. The nanosheets can be transferred onto solid substrates and depolymerized by heating. Electronic absorption spectroscopy reveals an optical gap of 0.25 eV, narrower than that of the bulk parent crystalline solid.     

Unique Properties of 2 D Layered Titanate Nanosheets as a Building Block for the Optimization of the Photocatalytic Activity and Photostability of TiO2‐Based Nanohybrids

In comparison with the hybridization with 0D TiO₂ nanoparticle, 2D layered TiO₂ nanosheets are much more effective in the improvement of the photocatalytic activity and photostability of semiconducting compounds. The 2D TiO₂–Ag₃PO₄ nanohybrid described in this paper shows a greater decrease in the electron‐hole recombination upon hybridization and a stronger chemical interaction between the components than the 0D homologue. This result confirms the benefits of 2D layered TiO₂ nanosheets as a building block for efficient hybrid‐type photocatalyst materials.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Layer-by-layer assembly and spontaneous flocculation of oppositely charged oxide and hydroxide nanosheets into inorganic sandwich layered materials

Exfoliated oxide nanosheets such as Ti0.91O2 and Ca2Nb3O10 and layered double hydroxide (LDH) nanosheets of Mg2/3Al1/3(OH)2 were restacked into inorganic sandwich layered materials. Sequential adsorption of these oppositely charged nanosheets from their colloidal suspensions yielded multilayer ultrathin films while their simple mixing produced lamellar flocculates. Eliminating carbonate ions from the reaction system was found to be essential for successfully achieving the sandwich structures. The flocculated materials as well as the films were characterized by atomic force microscopy (AFM), UV-visible absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and chemical analysis, which all supported the formation of the ordered sandwich structures. AFM observations revealed alternate dense tiling of LDH nanosheets and oxide nanosheets onto a substrate surface. UV-visible absorption spectra exhibited progressive enhancement of optical density due to oxide nanosheets as a function of deposition cycles, providing strong evidence for regular growth of multilayer films. The combinations of Mg2/3Al1/3(OH)2/Ti0.91O2 and Mg2/3Al1/3(OH)2/Ca2Nb3O10 produced XRD Bragg peaks having multilayer spacings of 1.2 and 2.0 nm, respectively. These basal spacing values are compatible with the sum of thickness of LDH nanosheets and corresponding oxide nanosheets. TEM images of flocculated samples displayed lamellar features with two different constituent layers appearing alternately.     

Facile Synthesis of Ultrathin Lepidocrocite Nanosheets from Layered Precursors

Ultrathin two‐dimensional nanosheets have been widely studied because of their peculiar properties and promising applications. As a typical layered material, successful exfoliation of freestanding ultrathin lepidocrocite (γ‐FeOOH) nanosheets from the bulk material has not been reported to date. Herein, we report a facile synthetic route to prepare ultrathin lepidocrocite nanosheets with a thickness of approximately 2–3 nm from FeO_x–propanediol layered precursors through weakening of the hydrogen bonds during the crystallization process. The ultrathin morphology and single‐crystal structure of the nanosheets were confirmed by transmission electron microscopy, X‐ray diffraction, and atomic force microscopy. The formation process of these nanosheets demonstrated simultaneous exfoliation and crystallization of lepidocrocite in basic aqueous solution. The obtained ultrathin nanosheets exhibited a much lower Néel temperature (18.3 K) than bulk lepidocrocite and weak ferromagnetic behavior below this temperature.     

Photoinduced electron accumulation in colloidally dispersed wide band-gap semiconductor nanosheets

We investigated photoinduced electron accumulation in a colloidal system of layered hexaniobate that is known as a photocatalytically active wide band-gap semiconductor, and attempted to control the photoresponse by introducing additives into the colloid. The inorganic nanosheets were obtained by exfoliation of the layered oxide. UV-irradiation of the colloids led to electron accumulation in the nanosheets to generate reduced niobate species. Propylammonium ions introduced as the exfoliating reagent and present as the counter ions of niobate nanosheets were indicated as the electron donor that stabilized the electron-accumulating state. Yield and half-life of the reduced niobate species greatly increased by adding an appropriate amount of photochemically inert clay nanosheets, while they increased only a little by the addition of molecular electron donors such as EDTA and triethanolamine. Moreover, the molecular species diminished the enhancement effect of the clay nanosheets. The results suggested that the photochemical event was not explained by direct interactions between the semiconductor nanosheets and the additives at molecular level but governed by indirect interactions between the colloid components regulated by the colloid structure.     

A Facile Steam Reforming Strategy to Delaminate Layered Carbon Nitride Semiconductors for Photoredox Catalysis

The delamination of layered crystals that produces single or few‐layered nanosheets while enabling exotic physical and chemical properties, particularly for semiconductor functions in optoelectronic applications, remains a challenge. Here, we report a facile and green approach to prepare few‐layered polymeric carbon nitride (PCN) semiconductors by a one‐step carbon/nitrogen steam reforming reaction. Bulky PCN, obtained from typical precursors including urea, melamine, dicyandiamide, and thiourea, are exfoliated into few‐layered nanosheets, while engineering its surface carbon vacancies. The unique sheet structures with strengthened surface properties endow PCNs with more active sites, and an increased charge separation efficiency with a prolonged charge lifetime, drastically promoting their photoredox performance. After an assay of a H₂ evolution reaction, an apparent quantum yield of 11.3 % at 405 nm was recorded for the PCN nanosheets, which is much higher than those of PCN nanosheets. This delamination method is expandable to other carbon‐based 2D materials for advanced applications.     

Two‐Dimensional Tellurium Nanosheets Exhibiting an Anomalous Switchable Photoresponse with Thickness Dependence

Two‐dimensional (2D) tellurium (Te) was recently predicted to be promising for diverse electronic and optoelectronic applications. However, the synthesis of high‐quality 2D Te structures remains challenging, which greatly hinders the exploration of its full properties. Herein, an anomalous photoresponse from negative to positive as a function of thickness in Te nanosheets is reported. Ultrathin Te layers with large size and clean interface were obtained through a topotactic transformation, in which the 2D Te structure was derived from a layered MTe₂ (M=Ti, Mo, W) matrix by excessive lithiation. Prominently, the photoresponse in Te nanosheets exhibits negative behavior when the thickness is less than 5 nm, which turns positive as the thickness increases. This unusual photoresponse will shed light on the full exploration of 2D non‐layered materials with exotic properties.