Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Synthesis and characterization of Fe(II)-coordinated PS-b-P[NIPAM-co-(VBC-Fe-DMAP)] block copolymers

In this work,a new type of block polymers,polystyrene-b-poly[(N-isopropyl acrylamide)-co-(vinyl benzyl chloride)](PS-b-P(NIPAM-co-VBC)),was prepared via reversible addition fragmentation transfer polymerization,then pentacyano(4-(dimethylamino pyridine))ferrate(Fe-DMAP) was attached to VBC units through a quaternization process.The Fe(Ⅱ)-coordinated PS-b-P[NIPAM-co-(VBC-Fe-DMAP)]block copolymers were characterized by ~1H-NMR,FT-IR and TGA.The self-assembly behavior of the block copolymers was also investigated and the micelle morphology was characterized by TEM.It was found that the PS-b-P(NIPAM-co-VBC) block polymer and Fe-coordinated block copolymer could both form spherical micelles in DMF/MeOH mixed solvent.     

Thermogravimetric characterization of sulfonated poly(styrene-isobutylene-styrene) block copolymers: effects of processing conditions

In this study, sulfonated poly(styrene-isobutylene-styrene) (S-SIBS) block copolymers were characterized by thermogravimetry as a function of four different processing conditions: sulfonation level, annealing temperature, film formation, and casting solvent. Sulfonated samples showed an increase in degradation temperature from 432 to 450 °C compared to the unsulfonated polymer, regardless of sulfonation level or other processing condition. Sulfonated samples also showed an additional minor loss of mass at approximately 290 °C, which was not observed in the unsulfonated polymer. At this temperature, desulfonation or a cleavage reaction of the aromatic carbon–sulfur bond occurs. In addition, annealing the sulfonated block copolymer at a higher temperature (180 °C) for an extended period of time also results in a partial desulfonation. These results were confirmed by a reduction in water sorption and in intensity of the infrared bands associated with sulfonic acid. There was no change in thermal stability in S-SIBS block copolymers as a function of film formation (solvent cast versus heat pressed) and casting solvent (six different solvents).     

Synthesis and properties of poly(butylene terephthalate)-poly(ethylene oxide)-poly(dimethylsiloxane) block copolymers

Poly(butylene terephthalate)-poly(ethylene oxide)-poly(dimethyl siloxane)-poly(ethylene oxide) block copolymers, (PBT-PEO-PDMS-PEO)_m, are synthesized by polycondensation (PC) of dimethylterephtalate (DMT), 1,4-butanediol (BDO) and PEO-PDMS-PEO. The soft block has been incorporated from 10 to 70 wt-%; the total molecular weight (MW) of the block-copolymers amounts to 16000 - 20000 g/mol. One major problem of polyether-PBT thermoplastic elastomers is their poor thermo-oxidative stability. Due to the excellent heat stability of PDMS, the resistance of this new thermoplastic elastomer against thermo-oxidative degradation has been increased 80 %! From differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) in the PEO-PDMS-PEO based COPEs, three phases can be distinguished. Besides the crystalline PBT phase, an amorphous mixed phase of PBT and PEO and an almost pure PDMS phase have been found. Due to the high concentration of the mixed PBT-PEO phase, the low temperature modulus and the glass transition temperature, T_g, are not dominated by the pure PDMS phase (T_g = −114°C). Depending on the amount of PBT and PEO present, the main glass transition lies in the range of −50°C to 50°C.     

Synthesis and characterization of poly(itaconate ester)s with etheric side chains

The synthesis and characterization of poly(itaconate ester)s with short poly(ethylene oxide) side chains have been studied. It was found that the monomer syntheses via esterification of itaconic acid resulted in incomplete esterification leaving up to 35 mol % monomers with carboxylic acid functionality. These acid groups were then incorporated into the polymers. This acid incorporation has not previously been reported, nor have the properties of the copolymers been studied. Techniques were developed to effectively remove the acid impurities to generate pure homopolymers. Titration and gas chromatographic techniques were developed to study the amount of acid impurity in the monomers, and titration was also used to characterize the polymers. Size exclusion chromatography and differential scanning calorimetry were used to study both the homopolymers and copolymers. It was found that the location and breadth of the glass transition is a function of acid content. Finally, isomerization of the itaconate monomers to the inactive mesaconate was also found to be a problem during the synthesis. Pure mesaconate and citraconate monomers were synthesized and characterized by ¹H-NMR. © 1993 John Wiley & Sons, Inc.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Transport properties of crosslinked acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The diffusion and transport of organic solvents through crosslinked nitrile rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends have been studied. The diffusion of cyclohexanone through these blends was studied with special reference to blend composition, crosslinking systems, fillers, filler loading, and temperature. At room temperature the mechanism of diffusion was found to be Fickian for cyclohexanone–NBR/EVA blend systems. However, a deviation from the Fickian mode of diffusion is observed at higher temperature. The transport coefficients, namely, intrinsic diffusion coefficient (D*), sorption coefficient (S), and permeation coefficient (P) increase with the increase in NBR content. The sorption data have been used to estimate the activation energies for permeation and diffusion. The van't Hoff relationship was used to determine the thermodynamic parameters. The affine and phantom models for chemical crosslinks were used to predict the nature of crosslinks. The experimental results were compared with the theoretical predictions. The influence of penetrants transport was studied using dichloromethane, chloroform, and carbon tetrachloride. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1815–1831, 1999     

Electron microscopic studies of SBS block copolymers I. A method to study the temperature dependence of phase separation

The potential applicability of a Film Formation Method of Crystal Growth to the study of morphological aspects of amorphous polymers was investigated using transmission electron microscopic techniques. A wide variety of morphologies of styrene-butadiene-styrene triblock copolymer can be achieved by varying the solvent power and film preparation temperatures. The effect of film preparation temperature indicates that below 100 °C (the glass transition temperature of polystyrene), there is very little change in the size of domains; above 100 °C a drastic change in morphology is observed. Not only is there rapid coarsening of both the constituent phases of the polymer above 100 °C, but also an intermixing of both phase components of the block copolymer. It was demonstrated that some monomeric materials are effective in maintaining the original morphology of the film; i. e. phase mixing is prevented.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers

The gel to sol transition of aqueous solutions of di‐ and triblock copolymers consisting of poly(ethylene oxide) and biodegradable polyesters was studied as a function of temperature. The molecular weight and the chemical composition of the biodegradable blocks, (poly(l ‐lactic acid), poly(dl ‐lactic acid), poly(dl ‐lactic acid‐co‐caprolactone), and poly(dl ‐lactic acid‐co‐glycolic acid)) were varied to investigate the effects of chain packing and relative hydrophobicity on the gel to sol transition. The block copolymers studied formed micelles at lower concentrations in water, while the concentrated solutions experienced a gel to sol transition as the temperature increased. Further increase in temperature resulted in the precipitation of polymers. With increasing molecular weight and chain packing tendency of hydrophobic biodegradable block, the gel to sol transition occurred at lower concentrations and the transition temperature ranged from 0°C to over 90°C in a relatively narrow concentration range. The results obtained in this study confirm the relationship between gelation properties and polymer structure, as well as provide more information for these polymers in drug delivery applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 751–760, 1999     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Synthesis and characterization of poly(diethylsiloxane) and its copolymers with different diorganosiloxane units

Poly(diethylsiloxane) and its copolymers with various kinds of R₁R₂SiO (R₁ = R₂ = methyl or phenyl, or R₁ = methyl and R₂ = phenyl) units have been prepared by the equilibrium polymerization of cyclosiloxanes. All the polymers have been characterized by ¹H and ²⁹Si NMR, gel permeation chromatography, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) measurements. The results indicate that a random distribution of different units has been obtained in the structures of copolymers containing 50 mol % diethylsiloxane units content. DSC and DMA show that the presence of 2.5 mol % diphenylsiloxane units or 5.0 mol % methylphenylsiloxane units in the copolymer can disrupt the crystallinity and lead to noncrystalline copolymers with low glass‐transition temperatures (ranging from ?133 to ?137 °C according to DSC). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2722–2730, 2003     

Transesterification and crystallization behavior of poly(butylene succinate)/poly(butylene terephthalate) block copolymers

The block copolymers of poly(butylene succinate) (PBS) and poly(butylene terephthalate) (PBT) were synthesized by melt processing for different times. The sequence distribution, thermal properties, and crystallization behavior were investigated over a wide range of compositions. For PBS/PBT block copolymers it was confirmed by statistical analysis from ¹H-NMR data that the degree of randomness (B) was below 1. The melting peak (T_m) gradually moved to lower temperature with increasing melt processing time. It can be seen that the transesterification between PBS and PBT leads to a random copolymer. From the X-ray diffraction diagrams, only the crystal structure of PBS appeared in the M1 copolymer (PBS 80 wt %) and that of PBT appeared in the M3 (PBS 50 wt %) to M5 (PBS 20 wt %) copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 147–156, 1998     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Preparation and characterization of poly(butylene terephthalate)/poly(ethylene terephthalate) copolymers via solid‐state and melt polymerization

To increase the T_g in combination with a retained crystallization rate, bis(2‐hydroxyethyl)terephthalate (BHET) was incorporated into poly(butylene terephthalate) (PBT) via solid‐state copolymerization (SSP). The incorporated BHET fraction depends on the miscibility of BHET in the amorphous phase of PBT prior to SSP. DSC measurements showed that BHET is only partially miscible. During SSP, the miscible BHET fraction reacts via transesterification reactions with the mobile amorphous PBT segments. The immiscible BHET fraction reacts by self‐condensation, resulting in the formation of poly(ethylene terephthalate) (PET) homopolymer. ¹H‐NMR sequence distribution analysis showed that self‐condensation of BHET proceeded faster than the transesterification with PBT. SAXS measurements showed an increase in the long period with increasing fraction BHET present in the mixtures used for SSP followed by a decrease due to the formation of small PET crystals. DSC confirmed the presence of separate PET crystals. Furthermore, the incorporation of BHET via SSP resulted in PBT‐PET copolymers with an increased T_g compared to PBT. However, these copolymers showed a poorer crystallization behavior. The modified copolymer chain segments are apparently fully miscible with the unmodified PBT chains in the molten state. Consequently, the crystal growth process is retarded resulting in a decreased crystallization rate and crystallinity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 882–899, 2007.     

Isothermal crystallization kinetics of PEO in poly(ethylene terephthalate)–poly(ethylene oxide) segmented copolymers. I. Effect of the soft‐block length

The isothermal crystallization kinetics of poly(ethylene oxide) (PEO) block in two poly(ethylene terephthalate) (PET)–PEO segmented copolymers was studied with differential scanning calorimetry. The Avrami equation failed to describe the overall crystallization process, but a modified Avrami equation, the Q equation, did. The crystallizability of the PET block and the different lengths of the PEO block exerted strong influences on the crystallization process, the crystallinity, and the final morphology of the PEO block. The mechanism of nucleation and the growth dimension of the PEO block were different because of the crystallizability of the PET block and the compositional heterogeneity. The crystallization of the PEO block was physically constrained by the microstructure of the PET crystalline phase, which resulted in a lower crystallization rate. However, this influence became weak with the increase in the soft‐block length. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3230–3238, 2000     

Synthesis and characterization of poly（phthalazinone ether nitrile） （PPEN）-polydimethylsiloxane （PDMS） block copolymers

Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.     

Synthesis and characterization of thermally stable and flame retardant poly (benzoxazine-co-urethane) matrices

Abstract

The flame-retardant behavior of organic polymers is considered as very important criteria to utilize them in the form of coatings, encapsulants, sealants, and matrices for high performance industrial applications. A new type of poly (benzoxazine-co-urethane) (PBZ-co-PU) matrices have been developed using dimethylol benzoxazine monomers (BZM and BZE) and tris(p-isocyanatophenyl)thiophosphate (Desmodur) through A₂?+?B₃ approach followed by thermal curing. The molecular structure of developed PBZ-co-PU was confirmed by FT-IR spectra and their thermal stability and flame retardant behavior were studied by standard methods. Data obtained from TGA and DSC, indicate that the PBZ-co-PU possesses higher Tg, better thermal stability and LOI than those of neat PBZ. Further, it was also observed that among the two matrix systems (PBZ-co-PU-1 and PBZ-co-PU-2) studied, the PBZ-co-PU-1 based system exhibited higher T_g, thermal stability and flame retardant behavior than those of PBZ-co-PU-2.     

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.     

Silicon-containing oligomeric poly(imido-ester-amides) obtained from asymmetric dicarboxylic acids. Synthesis,characterization and thermal analysis

Poly(imido-ester-amides) (PIEAs) derived from three new asymmetric dicarboxylic acids containing an imide and ester groups and an aminoacidic moiety (glycine, L-alanine or L-valine) and a wholly aromatic silicon-containing diamine were synthesized according to the Yamazaki method. PIEAs were characterized by spectroscopic methods including ²⁹Si NMR and elemental analysis, and the results were in agreement with the proposed structures. The thermal properties, glass transition temperature (Tg) and thermal decomposition temperature (TDT), were determined and the results showed that both parameters decreased when the aliphatic side chain provides by the amino acids increased, due to the higher free volume between the chains, which minimizes the interactions between them. Two of the PIEAs showed transparency according to the UV-vis spectra, due to that the side chains act as chain spacers, in front of PIEA-a including glycine as aminoacidic moiety, without side aliphatic group, which did not show transparence.