Asymmetric hydrogenation of enol phosphinates catalyzed by a chiral ferrocenylphosphine-rhodium complex. Asymmetric synthesis of optically active secondary alkyl alcohols

Catalytic asymmetric synthesis of secondary alkyl alcohols (up to 78% ee) was accomplished by asymmetric hydrogenation of enol diphenylphosphinates, derived from prochiral ketones such as acetophenone, 3-methyl-2-butanone, and 2-octanone, in the presence of a cationic rhodium complex of (R)-1-[(C)-1′,2-bis(diphenylphosphino)ferrocenyl]ethanol (BPPFOH).     

Asymmetric hydrosilylation of olefins catalyzed by a chiral ferrocenylphosphine-palladium complex. Asymmetric synthesis of optically active alcohols and bromides from olefins

Optically active norbornyl and 1-phenylethyl alcohols and bromides were obtained, respectively, from norbornyl- and 1-phenylethylpentafluorosilicates which were prepared by asymmetric hydrosilylation of norbornene and styrene with trichlorosilane catalyzed by a chiral ferrocenylphosphine-palladium complex followed by treatment with potassium fluoride.     

Homogeneous hydrogenation of ketones to alcohols with ruthenium complex catalysts

A number of ruthenium triphenylphosphine complexes catalyse the reduction of ketones to their corresponding alcohols in the presence of water. The most convenient catalyst precursors are carbonyl containing complexes which do not promote decarbonylation of the substrate. The hydrogenation of acetone with hydridochlorocarbonyltris(triphenylphosphine)ruthenium is first order with respect to the substrate concentration, the catalyst concentration, the hydrogen pressure and the water concentration. Turnover numbers up to 15,000 have been achieved with this catalyst. Other ketones are also reduced by RuHCl(CO)(PPh₃)₃ and the rate of the reaction is dependent on the nature of the substrate.     

Asymmetric reduction of ketones with sodium aluminum hydride modified with chiral amino alcohols

Asymmetric reduction of ketones with hydride complexes, which were prepared by in situ modification of NaAlH₄, with various chiral amino alcohols or diamines, was studied. The highest enantioselectivity (up to 93% ee) was achieved using 2-(hydroxydiphenylmethyl)pyrrolidine as a chiral inducing agent.     

Asymmetric reduction of aromatic and hetero cyclic ketones by hydrosilylation and hydrogen transfer in the presence of optically active rhodium catalysts

A study has been made of enantioselective hydrosilylation and reduction, by hydrogen transfer, of prochiral alkyl phenyl ketones or alkyl hetaryl ketones over various optically active catalysts. A total of 14 aromatic and heterocyclic carbinols were synthesized with preparative yields of 54–100%. The most effective catalytic systems were found to be complexes of RhCl₃ and [Rh(cod)Cl]₂ with the known optical inductor (S,S)-i-Pr-Pybox, with which we have obtained for the first time a series of heterocyclic secondary alcohols with an enantioselectivity of 20–63%.Latvian Institute of Organic Synthesis, Riga, LV-1006. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 342–358, March, 1996. Original article submitted December 11, 1995.     

光学活性N,N-二烷基-β-氨基醇硼烷配合物对酮的不对称还原反应

从天然氨基酸出发制得的九种新的光学活性N,N-二烷基-β-氨基醇,分别与硼烷反应生成相应的手性恶唑硼烷配合物并将其用于不对称还原反应中. 硼烷-手性恶唑硼烷-还原体系能将脂肪酮和芳香酮还原为仲醇, 化学还原收率可达100%,光学收率也比较高.并简单讨论了立体效应, 反应温度和溶剂效应对此还原反应的影响.     

Asymmetric photocycloaddition between furan and optically active ketones

The photochemical reaction between 3β-acetoxyandrost-5-en-17-one4 or (–)-methone5 and furan was preceded by isomerization of the ketones to the corresponding γδ-unsaturated aldehydes which subsequently added to furan furnishing 6-substituted 2,7-dioxabicyclo-[3.2.0]hept-3-enes,8 and9. Under the same conditions 1,2:5,6-di-O-isopropylidene α-d-ribo-hexofuranos-3-ulose12 reacted with furan without any isomerization and afforded all four stereoisomeric bicyclic photoadducts14–17. The ratio of the products resulting from the approach of the furan molecule to12 from the less hindered and from the more hindered sides was 3:1. This pointed at the decisive role of steric factors in controlling the course of photochemical cycloaddition.     

Enantioselective borohydride reduction catalyzed by optically active cobalt complexes

The highly enantioselective borohydride reduction of aromatic ketones or imines to the corresponding alcohols was developed in the presence of a catalytic amount of an optically active cobalt(II) complex catalyst. This enantioselective reduction is carried out using a precisely premodified borohydride with alcohols such as tetrahydrofurfuryl alcohol, ethanol and methanol. High optical yields are obtained by choosing the appropriate alcohol as modifiers and a suitable beta-ketoiminato ligand of the catalyst. The enantioselective borohydride reduction has been successfully applied to the preparation of optically active 1,3-diols, the stereoselective reduction of diacylferrocenes, and dynamic and/or kinetic resolution of 1,3-dicarbonyl compounds.     

Asymmetric polymerization of triphenylmethyl methacrylate by optically active anionic catalysts

Triphenylmethyl methacrylate (TrMA) was polymerized with two types of asymmetric anionic catalyst, lithium (R)-N-(1-phenylethyl)anilide (LiAn) and (-)-sparteine–butyllithium complex (Sp–BuLi), at ?78°C. Both catalysts yielded optically active polymers. The polymers obtained with LiAn in toluene and tetrahydrofuran (THF) showed specific rotations [α] of from ?50° to ?90° (in THF). The [α] of the polymer obtained with Sp–BuLi in toluene was positive and increased with polymer yield reaching above +300°s, whereas the polymer obtained in THF showed a low [α] (ca. +7°). Gel permeation chromatograms of both polymers obtained with LiAn and Sp–BuLi in THF exhibited rather narrow molecular weight distributions, whereas those obtained in toluene showed at least two or three components with markedly different molecular weights. The circular dichroism (CD) spectrum of the polymer obtained with Sp–BuLi showed strong positive peaks at 208 and 232 nm and a weak band at 250–280 nm; the polymer produced with LiAn showed a similar spectrum with opposite sign. The poly(methyl methacrylate)s derived from these poly(TrMA)s were highly isotactic but showed negligible rotations ([α] ± 2° in toluene). The polymer of high molecular weight showed clear polarization under a polarizing microscope and the low polymer obtained with LiAn appeared to show flow birefringence in chloroform at room temperature.     

Practical synthesis of optically active amino alcohols via asymmetric transfer hydrogenation of functionalized aromatic ketones

2-Substituted acetophenones such as 2-cyano-, 2-azido-, or 2-nitroacetophenones were effectively reduced with a mixture of HCOOH/N(C(2)H(5))(3) containing a chiral Ru(II) catalyst, RuCl[(S,S)-N-(p-toluenesulfonyl)-1,2-diphenylethylenediamine](p-cymene), giving the corresponding optically active alcohols, which can be converted to optically active amino alcohols with excellent ee's. Similarly, the reaction of 2-benzoylacetophenone with the same Ru catalyst gave a quantitative yield of the corresponding optically active 1,3-diol with 99% ee.     

Asymmetric reduction of perfluoroalkyl ketones with chiral lithium alkoxides

Reduction of perfluoroalkyl ketones with chiral lithium alkoxides gave chiral α-perfluoroalkyl alcohols in high enantiomeric excesses. Interestingly, reaction of 2,2,2-trifluoroacetophenone (1) with lithium (S)-1-phenylethoxide (2) gave (S)-2,2,2-trifluoro-1-phenylethanol (3), while the same reaction of perfluorooctan-1-one (7) with 2 gave (R)-1H-1-phenylperfluorooctanol (8). Based on the speculation of mechanism, the order of steric effects on this reaction is estimated as C₇F₁₅ > substituted phenyl > CF₃.     

Asymmetric transfer hydrogenation of ferrocenyl ketones: a new simple route to chiral ferrocenyl alcohols

The asymmetric transfer hydrogenation (ATH) of ferrocenyl ketones, such as FcC(O)CH₂Y [Fc = ferrocenyl, Y = H (1a), CH₃ (1b), Cl (1c) or N₃ (1d)] has been carried out using the Noyori/Ikariya catalysts [(−)-(1R,2S)-ephedrine] or N-tosyl-(1R,2R)-diphenylethylenediamine [(R,R)-TsDPEN] as chiral ligands combined with [RuCl₂(η⁶-benzene)]₂ and 2-PrOH or HCO₂H–Et₃N as the hydrogen sources, respectively. The best results were achieved with the [(R,R)-TsDPEN–Ru^IIHCO₂H–Et₃N] catalytic system, which produced the ferrocenylalcohols (R)-2a, (R)-2c, and (R)-2d in good yields and excellent enantiomeric excesses (>98% ee).     

Asymmetric synthesis of new chiral long chain alcohols

Sixteen new chiral alcohols with alkyl (C₁₁–C₁₉) and aryl, substituted aryl, hetero aryl and biaryl groups 2a–2t were synthesized by three different asymmetric reduction methods from their corresponding ketones 1a–1t. Chiral NaBH₄ (method A), chiral BH₃ (method B) and chiral AIP (method C) were used as asymmetric reduction catalysts. Chiral NaBH₄ was modified by four different ligands 3a–3d, chiral BH₃ and chiral AIP by four different ligands 4a–4d. Ligand 4c was synthesized for the first time in this work. Chiral NaBH₄ generated chiral alcohols of (R)-configuration and chiral BH₃ and chiral AIP of (S)-configuration with high enantiomeric excesses, were analysed by chiral HPLC. In order to determine the ee values by chiral HPLC, sixteen corresponding racemic alcohols, synthesized by reducing their corresponding ketones via NaBH₄, were used for chiral resolution on a Daicel OD HPLC column. The sixteen starting ketones were synthesized in this study by Friedel–Craft acylation. The new chiral alcohols were characterized by IR, NMR, (¹H and ¹³C), MS, elemental analyses and specific rotation. The reduction methods A, B and C were applied to these ketones for the first time in this study and were compared with each other. The relationship between the structure of the ketone and the yield and the enantiomeric excess was discussed.     

Asymmetric grignard cross-coupling by means of polymer-supported optically active β-dimethylaminoalkylphosphine-nickel catalysts

New polymer ligands containing β-dimethylaminoalkylphosphines were prepared using chloromethylated polystyrene, and the ligands were used for nickel-catalyzed asymmetric cross-coupling of sec-alkyl Grignard reagents with vinyl bromide to yield coupling products of ～50% ee.