Spectroscopic study of ZnO doped CeO2-PbO-B2O3 glasses

Glass samples of compositions xZnO-xCeO₂-(30−x)PbO-(70−x)B₂O₃ with x varying from 2% to 10% mole fraction are prepared by the melt quench technique. The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV-visible spectroscopic measurement techniques. The FTIR spectral analysis indicates that with the addition of ZnO contents in glass network, structural units of BO₃ are transformed into BO₄. It has been observed in our previous work that band gap decreases from 2.89 to 2.30 eV for CeO₂-PbO-B₂O₃ glasses with cerium content varying from 0% to 10% [Gurinder Pal Singh, Davinder Paul Singh, Physica B 406(3) (2011) 640-644]. With the incorporation of zinc in CeO₂-PbO-B₂O₃ glasses, the optical band gap energy decreases further from 2.38 to 2.03 eV. This causes more compaction of the borate network, which results in an increase of density (3.39-4.02 g/cm³). Transmittance shows that ZnO in glass samples acts as a reducing agent thathelps to convert Ce⁴⁺→Ce³⁺ ions.     

Modification in structural and optical properties of ZnO, CeO2 doped Al2O3-PbO-B2O3 glasses

The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV visible spectroscopic measurement techniques. XRD results have confirmed the glassy nature of the samples. The FTIR spectral analysis reveals that with the combined presence of ZnO and CeO₂ contents in Al₂O₃-PbO-B₂O₃ glasses, more BO₃ groups are transformed into BO₄. The optical analysis reveals that optical band gap energy decreases more for CeO₂-ZnO-Al₂O₃-PbO-B₂O₃ glasses (from 2.28 to 1.84 eV). The presence of CeO₂ and ZnO in the glass samples causes more compaction of the borate network due to the formation of more BO₄ groups and the presence of ZnO₄ groups, which results an increase in density, refractive index and decrease of molar volume.     

Study of elastic properties of CeO2 by statistical moment method

The purpose of the present paper is to investigate the temperature and pressure dependences of the elastic properties of cerium dioxide using the statistical moment method (SMM). The equation of states of bulk CeO₂ is derived from the Helmholtz free energy, and the pressure dependences of the elastic moduli like the bulk modulus, B_T, shear modulus, G, Young’s modulus, E, and elastic constants (C11, C12, and C44) are presented taking into account the anharmonicity effects of the thermal lattice vibrations. In the present study, the influence of temperature and pressure on the elastic moduli and elastic constants of CeO₂ has also been studied, using three different interatomic potentials. We compare the results of the present calculations with those of the previous theoretical calculations as well as with the available experiments.     

Electrical conductivity of the system Y2O3CeO2

The electrical conductivity of the system Y₂O₃CeO₂ was measured in the temperature range 500–1100°C and P_o2 range 10^–7?10^?1 atm. Possible defect models were suggested on the basis of conductivity data, which were investigated as a function of temperature and of P_o2. The observed activation energies were 0.40 eV and 1.79 eV in the low- and high-temperature regions, respectively. The observed conductivity dependences on P_o2 were in the temperature range 500–750°C and at temperatures from 750–1100°C. It is suggested that the system Y₂O₃CeO₂ shows a mixed ionic plus hole conduction due to an O^″_i defect and an electronic hole conduction due to a V^'''_Y defect in the low- and high-temperature regions, respectively.     

Synthesis and characterization of wire-like and near-spherical Eu2O3-doped Y2O3 phosphors by solvothermal reaction

Eu₂O₃-doped yttrium oxide (3 mol%) [Y₂O₃:Eu(3 mol%)] with wire-like and near-spherical morphologies were prepared by a solvothermal treatment using water, ethanol, ethylene glycol and glycerol as reaction media followed by calcination. The powders prepared in water and ethanol possessed wire structure, where the powder treated in water showed high aspect ratio and that in ethanol showed low aspect ratio. The powders prepared in ethylene glycol and glycerol possessed well-dispersed near-spherical powders, which showed almost the same level of photoluminescence emission intensity as that of submicron particles prepared without solvothermal treatment.     

氧空位对Co掺杂TiO2稀磁半导体中杂质 分布和磁交换的影响

本文使用基于密度泛函理论的第一性原理方法研究了Co掺杂TiO₂稀磁半导体中氧空位对体系能量和磁性的影响. 通过对总能量的计算发现当引入氧空位后近邻杂质体系能量高于均匀掺杂体系, 同时氧空位易在Co近邻位置富集. 进而发现氧空位的存在及其占位可以影响Co离子间的磁交换, 近邻Co离子体系下氧空位的引入使Co离子间的铁磁耦合减弱; 非近邻Co离子体系下, 底面氧空位使Co离子间呈反铁磁耦合而顶点氧空位使Co离子间呈铁磁耦合. 总之, 氧空位的存在对Co掺杂TiO₂材料的能量及磁性都有较大影响.     

The influence of interfacial barrier engineering on the resistance switching of In2O3：SnO2/TiO2/In2O3：SnO2 device

The I-V characteristics of In2O3：SnO2/TiO2/In2O3：SnO2 junctions with different interracial barriers are inves- tigated by comparing experiments. A two-step resistance switching process is found for samples with two interfacial barriers produced by specific thermal treatment on the interfaces. The nonsynchronous occurrence of conducting filament formation through the oxide bulk and the reduction in the interracial barrier due to the migration of oxygen vacancies under the electric field is supposed to explain the two-step resistive switching process. The unique switching properties of the device, based on interracial barrier engineering, could be exploited for novel applications in nonvolatile memory devices.     

An 17O nuclear quadrupole resonance study of hydrogen atom motion in KH2PO4

The nuclear quadrupole resonance of ¹⁷O naturally abundant in powdered KH₂PO₄ is measured in its ferro-electric and para-electric phases. Fine structure is revealed due to the magnetic dipolar interaction of the oxygen nucleus and the proton in a neighbouring hydrogen atom.     

Meter-long CeO2/YSZ/Y2O3 buffer layers for YBCO coated conductors using DC reactive sputtering

This paper reports CeO₂/YSZ/Y₂O₃ buffer layers deposited on biaxially textured NiW substrates by DC reactive sputtering in a reel-to-reel system. The effect of partial pressure of water vapor (P_H2O) on surface morphology and orientation of the Y₂O₃ films was examined. The obtained CeO₂/YSZ/Y₂O₃ buffer layers exhibit a highly biaxial texture, with in- and out-of-plane FWHM values respectively in the range of 6.0–7.0° and 4.5–5.5°. Crystallographic consistency of CeO₂/YSZ/Y₂O₃ along meter length is excellent. Atomic force microscope observation (AFM) reveals a smooth, continuous and crack-free surface with a Root-mean-square roughness (RMS) lower than 10 nm.     

Thermoluminescence glow curves analysis of pure and CeO2-doped Li2O-Al2O3-SiO2 glass ceramics

A comparative study of the thermoluminescence (TL) emission between beta-irradiated lithium aluminosilicates, Li₂O-Al₂O₃-SiO₂ (LAS), and beta-irradiated CeO₂-doped lithium aluminosilicates, Li₂O-Al₂O₃-SiO₂-CeO₂ (LAS:Ce), grown by sol-gel technique and preannealed at 1250 °C is presented. It is found that doping reinforces the result of preannealing the sample; the incorporation of CeO₂ at low concentrations shifts the TL curves towards higher temperatures and increases the total intensity with respect to samples without the dopant. This behavior, together with the fact that CeO₂ is a good densification agent, suggests the possibility of using CeO₂ to improve the technological properties of LAS. Deconvolution analysis of the thermoluminescence glow curves of doped materials under general order kinetics shows that the relevant temperatures at which the component signals appear are virtually the same as for pure samples. This suggests that CeO₂ does not introduce new types of traps, but only changes the population and distribution of impurities responsible for the TL in the original matrix of LAS. Finally, the kinetic parameters for the deconvoluted curves are reported. They corroborate that changes in CeO₂ concentration only vary the depth and distribution of the same kind of original traps.     

Study of the ferroelectric–paraelectric phase transition of NaH3(SeO3)2 single crystals by H and Na NMR

The ¹H and ²³Na spin–lattice and spin–spin relaxation times of NaH₃(SeO₃)₂ single crystals grown using the slow-evaporation method were measured as functions of temperature and frequency in the ferroelectric and paraelectric phases. The changes in the symmetry of the (SeO₃)²⁻ dimers as a result of the ferroelectric–paraelectric phase transition are associated with large changes in the spin–lattice and spin–spin relaxation times, and in the number of resonance lines. The large changes in the relaxation times at 195 K indicate that the H and Na ions are significantly affected by this transition. The change in the number of resonance lines for the ¹H and ²³Na nuclei means that the orientations of the (SeO₃)²⁻ dimers and the environments of the Na ions change at T_C. Therefore, the orientations of the (SeO₃)²⁻ dimers and the environments of the Na ions play important roles in the phase transitions. In conclusion, the ferroelectric–paraelectric phase transition of NaH₃(SeO₃)₂ is accompanied by changes in hydrogen-bond structure and distortions of the (SeO₃)²⁻ and Na⁺ ion lattices, which form a slightly distorted octahedron.     

Enhanced superconducting properties of Eu2O3-doped MgB2

Bulk polycrystalline samples of Eu₂O₃-doped MgB₂ have been synthesized by a standard solid state reaction route and their structural and superconducting properties have been investigated. As a function of Eu₂O₃ content we have found a significant increase in the critical current density (J_c) and the irreversibility field (H_irr) in the magnetic field range 0–6 T. The XRD results reveal the presence of MgO and EuB₆ secondary phases along with the main hexagonal phase of MgB₂. The strain values and the lattice distortions have been found to increase almost linearly with the nominal Eu₂O₃ content. The observed significant improvement in J_c(H) and H_irr in the Eu₂O₃-doped MgB₂ samples, thus is mainly attributed to the lattice distortions introduced by Eu₂O₃ doping.     

氧化硼玻璃的11B变温核磁共振研究

本文应用变温核磁共振(NMR)技术研究了氧化硼(B₂O₃)玻璃从玻璃态至融熔态之间的结构变化。实验表明,T>430℃时,以硼氧组环为基本组成单元的玻璃态结构开始解体;600℃2O₃双棱锥体分子相互连接而成的链状结构。链结构在T>930℃时发生断裂,最终成为游离的B₂O₃分子。 关键词：     

Defect formation and water incorporation in Y2O3

The molecular statics method is used to study the formation of defects and water incorporation in Y₂O₃. The crystal structure, the isothermal compressibility, and the formation enthalpy of Y₂O₃ calculated with the chosen interaction potentials are in good agreement with the experimental data. The formation energies of intrinsic and impurity defects are evaluated. The binding energy of protons and oxygen vacancies with an acceptor impurity at different distances is calculated. Various water incorporation reactions in the oxide are examined, including the mechanisms involving oxygen interstitial sites and oxygen vacancies produced by the acceptor doping. It is shown that the water incorporation in pure Y₂O₃ is energetically less favorable than in the acceptor doped oxide.     

Preparation and luminescent properties of cubic Eu:Y2O3 nanocrystals and comparison to bulk Eu:Y2O3

Y₂O₃:Eu³⁺ nanocrystals were prepared by combustion synthesis. The particle size estimated by X-ray powder diffraction (XRD) was about 10 nm. A blue-shift of the charge-transfer (CT) band in excitation spectra was observed in Y₂O₃:Eu³⁺ nanocrystals compared with bulk Y₂O₃:Eu³⁺. The electronic structure of Y₂O₃ is calculated by density functional method and exchange and correlation have been treated by the generalized gradient approximation (GGA) within the scheme due to Perdew-Burke-Ernzerhof (PBE). The calculated results show that the energy centroid of 5d orbital in nanocrystal has increasing trend compared with that in the bulk material. The bond length and bond covalency are calculated by chemical bond theory. The bond lengths of Y₂O₃:Eu³⁺ nanocrystal are shorter than those of the bulk counterpart and the bond covalency of Y₂O₃:Eu³⁺ nanocrystal also has an increasing trend. By combining centroid shift and crystal-field splitting, the blue-shift of the CT band is interpreted.     

Structural and optical properties of nanoparticulate Y2O3:Eu2O3 made by microwave plasma synthesis

Nanoparticulate Y₂O₃:Eu₂O₃ with a small, uniform particle size and a well-defined composition was synthesized using a low temperature microwave plasma process. The structural evolution and the luminescence properties were studied in different states of annealing and Eu₂O₃ addition using X-ray diffraction, transmission electron microscopy, and UV-photoluminescence spectroscopy. As synthesized, the samples were amorphous and showed only weak luminescence. Subsequent annealing steps from 500°C to 800°C lead to the formation and growth of cubic Y₂O₃:Eu₂O₃ nanocrystals (5–20 nm) and a concomitant strong increase of the luminescence yield already at small grain sizes in the range of 10 nm. No self-quenching effects were observed up to 11 mol% Eu₂O ₃.     

Effect of ion nitriding on the crystal structure of 3 mol% Y2O3-doped ZrO2 thin-films prepared by the sol-gel method

We investigated the effect of ion nitriding on the crystal structure of 3 mol% Y₂O₃-doped ZrO₂ (3YSZ) thin-films prepared by the sol-gel method. For this purpose, we used X-ray diffractometry to determine the crystalline phases, the lattice parameters, the crystal sizes, and the lattice microstrains, and glow discharge-optical emission spectroscopy to obtain the depth profiles of the elemental chemical composition. We found that nitrogen atoms substitute oxygen atoms in the 3YSZ crystal, thus leading to the formation of unsaturated-substitutional solid solutions with reduced lattice parameters and Zr_0.94Y_0.06O_1.72N_0.17 stoichiometric formula. We also found that ion nitriding does not affect the grain size, but does generate lattice microstrains due to the increase in point defects in the crystalline lattice.     

Nanocrystalline oxide (Y2O3, Dy2O3, ZrO2, NiO) coatings on BaTiO3 submicron particles by precipitation

Nanocoatings (5–20 nm) of different compounds on fine BaTiO₃ particles were obtained by means of precipitation processes. Homogeneous and smooth shells of Y(OH)CO₃ and Dy(OH)CO₃ were grown from nitrate solutions in the presence of urea. An irregular coating consisting of zirconia nanoparticles was produced from zirconyl nitrate solution using ammonia as a precipitating agent after adsorption of a polymeric polyelectrolyte on the BaTiO₃ surface. Composite particles with a peculiar morphology were obtained by inducing heterogeneous nucleation and growth of Ni(OH)₂ lamellae on the BaTiO₃ surface. The different shells can be transformed in a nanocrystalline coating of the corresponding oxide (Y₂O₃, Dy₂O₃, ZrO₂, NiO) by calcination at moderate temperatures (400–700 °C). The overall results indicate that precipitation from solution represents a versatile process to grow a second-phase layer on the surface of BaTiO₃ particles. This approach can be used as an alternative to mechanical wet mixing for controlled doping of ferroelectric materials and for the fabrication of composite materials with specific geometry of the two-phase assembly.     

The spin-glass state in Y2Co2/3Mo4/3O7 and Y2Fe2/3Mo4/3O7 complex oxides

The magnetic properties of Y₂ B _2/3Mo_4/3O₇ complex oxides (B = Co, Fe) were studied in the temperature range 2–300 K. At low temperatures, these compounds exhibit spin-glass properties with freezing temperatures T _f=26 and 33 K, respectively, and typical features in the magnetic hysteresis and in the dependences of the real part of the dynamic magnetic susceptibility on temperature and ac magnetic field frequency. Above T _f, the static magnetic susceptibility of the samples studied depends on the applied magnetic field, which is tentatively assigned to the presence of metallic cobalt and/or yttrium orthoferrite YFeO₃ introduced in the course of sample preparation. __________ Translated from Fizika Tverdogo Tela, Vol. 47, No. 12, 2005, pp. 2182–2188. Original Russian Text Copyright ? 2005 by Bazuev, Korolev.