A new displacement-type stability equation and general stability analysis of laminated composite circular conical shells with triangular grid stiffeners

In this paper,based on the theory of Donnell-type shallow shell,a new displacement-type stability equations is first developed for laminated composite circular conical shellswith triangular grid stiffeners by using the variational calculus and generalized smeared-stiffener theory.The most general bending stretching couplings,the effect of eccentricity ofstiffeners are considered.Then,for general stability of composite triangular grid stiffenedconical shells without twist coupling terms,the approximate formulas are obtained forcritical external pressure by using Galerkin‘s procedure.Numerical examples for a certainC/E composite conical shells with inside triangular grid stiffeners are calculated and theresults are in good agreement with the experimental data.Finally,the influence of someparameters on critical external pressure is studied.The stability equations developed andthe formulas for critical external pressure obtained in this paper should be very useful in theastronautical engineering design.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

Three-dimensional free vibration analysis of rotating laminated conical shells: layerwise differential quadrature (LW-DQ) method

This paper focuses on the free vibration analysis of thick, rotating laminated composite conical shells with different boundary conditions based on the three-dimensional theory, using the layerwise differential quadrature method (LW-DQM). The equations of motion are derived applying the Hamilton’s principle. In order to accurately account for the thickness effects, the layerwise theory is used to discretize the equations of motion and the related boundary conditions through the thickness of the shells. Then, the equations of motion as well as the boundary condition equations are transformed into a set of algebraic equation applying the DQM in the meridional direction. This study demonstrates the applicability, accuracy, stability and the fast rate of convergence of the present method, for free vibration analyses of rotating thick laminated conical shells. The presented results are compared with those of other shell theories obtained using conventional methods and a special case where the angle of the conical shell approaches zero, that is, a cylindrical shell and excellent agreements are achieved.     

Iterative method for large deflection nonlinear problem of laminated composite shallow shells and plates

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｃｏｍｐｏｓｉｔｅｓａｒｅｅｘｔｅｎｓｉｖｅｌｙａｐｐｌｉｅｄｉｎｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｓｔｒｕｃｔｕｒｅｓａｎｄｍｅｃｈａｎｉｃｓｏｆｃｏｍｐｌｅｘｍａｔｅｒｉａｌｓｈａｓｂｅｎｈｉｇｈｌｙａｄｖａｎｃｅｄ,ｉ...     

爆炸冲击下复合材料层合扁球壳的动力屈曲

研究计及横向剪切的复合材料层合扁球壳在爆炸冲击载荷作用下的非线性轴对称动力屈曲问题。通过在复合材料层合扁球壳非线性稳定性的基本方程中增加横向转动惯量项并引入R.H.Cole理论的爆炸冲击力,得到爆炸冲击下复合材料层合扁球壳的动力控制方程,应用Galerkin方法得到用顶点挠度表达的爆炸冲击动力响应方程,并采用Runge-Kutta方法进行数值求解,采用Budiansky-Roth准则确定冲击屈曲的临界载荷,讨论了壳体几何尺寸对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,此方法是可行的。     

碳纳米管增强复合材料圆锥薄壳非线性自由振动

考虑碳纳米管复合材料作为功能梯度材料的不均匀性,基于连续介质理论以及哈密尔顿变分原理,建立了功能梯度碳纳米管增强复合材料开口圆锥薄壳结构的非线性运动偏微分控制方程,然后利用Galerkin法,将非线性偏微分控制方程转化为常微分控制方程,进而采用谐波平衡法求解了开口圆锥壳的非线性自由振动问题,并探讨了圆锥薄壳几何参数、碳纳米管参数对结构非线性自由振动的影响．数值研究表明结构的无量纲非线性自由振动频率与线性自由振动频率的比值随圆锥薄壳长厚比的增大而变小、并随圆锥角的增大而变大．     

加筋板壳稳定性分析中一种简单的有限元模式

采用考虑耦合和剪切效三结点十五参数罚函数层板壳单元和与之相适应的两结点非协调层合梁单元，适用于任意和筋复合材料层合板壳的稳定性分析。数值计算表明：该单元不仅对边界形状的适应性强，而且在工程精度范围内具有简单，经济，高效的优点。     

Thermally induced dynamic instability of laminated composite conical shells

Thermally induced dynamic instability of laminated composite conical shells is investigated by means of a perturbation method. The laminated composite conical shells are subjected to static and periodic thermal loads. The linear instability approach is adopted in the present study. A set of initial membrane stresses due to the elevated temperature field is assumed to exist just before the instability occurs. The formulation begins with three-dimensional equations of motion in terms of incremental stresses perturbed from the state of neutral equilibrium. After proper nondimensionalization, asymptotic expansion and successive integration, we obtain recursive sets of differential equations at various levels. The method of multiple scales is used to eliminate the secular terms and make an asymptotic expansion feasible. Using the method of differential quadrature and Bolotin's method, and imposing the orthonormality and solvability conditions on the present asymptotic formulation, we determine the boundary frequencies of dynamic instability regions for various orders in a consistent and hierarchical manner. The principal instability regions of cross-ply conical shells with simply supported–simply supported boundary conditions are studied to demonstrate the performance of the present asymptotic theory.     

Stability of laminated composite circular conical shells under external pressure

In this paper,based on the mixed-type theory developed by the same authors.atheoretical analysis is presented for the stability of laminated composite circular conicalshells under external pressure.The formulas for critical external pressure are obtained byusing the potential energy variation principle.Very good agreement is shown between thetheoretical prediction of critical external pressure and the experimental data.Finally,theinfluence of some parameters on critical external pressure is discussed numerically.Themixed-type theory developed by the same authors and the results obtained in this paperare very useful in aerospace engineering design.     

ON THE REFINED FIRST-ORDER SHEAR DEFORMATION PLATE THEORY OF KARMAN TYPE

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｌａｍｉｎａｔｅｄｃｏｍｐｏｓｉｔｅｓｉｎｔｈｉｎ＿ｗａｌｌｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｒｅａｓｅｓｓｏｔｈａｔｅｆｆｅｃｔｓｏｆｔｒａｎｓｖｅｒｓｅｓｈｅａｒｄｅｆｏｒｍａｔｉｏｎｓｃａｎｎｏｔｂｅｎｅｇｌｅｃｔｅｄａｎｄｉｎｖｏｋｅｑｕｉｔｅｃｏｍｐｌｅｘｅｓｉｎｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓ.Ｉｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔｔｈｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｌａｍｉｎａｔｅｄｐｌａｔｅｓａｎｄｓｈｅｌｌｓｃｏｕｎｔｉｎｇｆｏｒｔｒ…     

Non-linear dynamic analysis of symmetric and antisymmetric cross-ply laminated orthotropic thin shells

In this paper, the governing equations for non-linear free vibration of truncated, thin, laminated, orthotropic conical shells using the theory of large deformations with the Karman-Donnell-type of kinematic nonlinearity are derived. Applying superposition principle and Galerkin’s method, these equations are reduced to a time dependent non-linear differential equation. The frequency-amplitude relationship for the laminated orthotropic thin truncated conical shell is obtained using the method of weighted residuals. In the particular case, we can obtain the similar relationships for the single-layer and laminated orthotropic cylindrical shells, also. The influence played by geometrical parameters of the conical shell and physical parameters of the laminate (i.e. material properties, staking sequences and number of layers) on the non-linear vibration behavior of the conical shell is examined. It is noticed that the non-linear vibration of shells is highly dependent on laminate characteristics and, from these observations, it is concluded that specific configurations of laminates should be designed for each kind of application. Present results are compared with available data for special cases.     

On the vibration of laminated nonhomogeneous orthotropic shells

In this paper, an analytical procedure is given to study the free vibration of the laminated homogeneous and non-homogeneous orthotropic conical shells with freely supported edges. The basic relations, the modified Donnell type motion and compatibility equations have been derived for laminated orthotropic truncated conical shells with variable Young’s moduli and densities in the thickness direction of the layers. By applying the Galerkin method, to the basic equations, the expressions for the dimensionless frequency parameter of the laminated homogeneous and non-homogeneous orthotropic truncated conical shells are obtained. The appropriate formulas for the single-layer and laminated complete conical and cylindrical shells made of homogeneous and non-homogeneous, orthotropic and isotropic materials are found as a special case. Finally, the influences of the non-homogeneity, the number and ordering of layers and the variations of the conical shell characteristics on the dimensionless frequency parameter are investigated. The results obtained for homogeneous cases are compared with their counterparts in the literature.     

On the nonlinear stability of symmetrically laminated cylindrically orthotropic shallow spherical shells

In this paper,the large deflection theory of symmetrically laminated cylindricallyorthotropic shallow spherical shells is established.Based on this theory,applying themodified iteration method,the analytic solution for critical buckling loads of the shells withrigidly clamped edges under actions of uniform pressure has been obtained.     

Corotational nonlinear analyses of laminated shell structures using a 4-node quadrilateral flat shell element with drilling stiffness

A new 4-node quadrilateral flat shell element is developed for geometrically nonlinear analyses of thin and moderately thick laminated shell structures. The fiat shell element is constructed by combining a quadrilateral area co- ordinate method （QAC） based membrane element AGQ6- II, and a Timoshenko beam function （TBF） method based shear deformable plate bending element ARS-Q12. In order to model folded plates and connect with beam elements, the drilling stiffness is added to the element stiffness matrix based on the mixed variational principle. The transverse shear rigidity matrix, based on the first-order shear deformation theory （FSDT）, for the laminated composite plate is evaluated using the transverse equilibrium conditions, while the shear correction factors are not needed. The conventional TBF methods are also modified to efficiently calculate the element stiffness for laminate. The new shell element is extended to large deflection and post-buckling analyses of isotropic and laminated composite shells based on the element independent corotational formulation. Numerical re- sults show that the present shell element has an excellent numerical performance for the test examples, and is applicable to stiffened plates.     

Free vibrations of rotating composite conical shells with stringer and ring stiffeners

In this paper, an analytical solution for the free vibration of rotating composite conical shells with axial stiffeners (stringers) and circumferential stiffener (rings), is presented using an energy-based approach. Ritz method is applied while stiffeners are treated as discrete elements. The conical shells are stiffened with uniform interval and it is assumed that the stiffeners have the same material and geometric properties. The study includes the effects of the coriolis and centrifugal accelerations, and the initial hoop tension. The results obtained include the relationship between frequency parameter and circumferential wave number as well as rotating speed at various angles. Influences of geometric properties on the frequency parameter are also discussed. In order to validate the present analysis, it is compared with other published works for a non-stiffened conical shell; other comparison is made in the special case where the angle of the stiffened conical shell goes to zero, i.e., stiffened cylindrical shell. Good agreement is observed and a new range of results is presented for rotating stiffened conical shells which can be used as a benchmark to approximate solutions.     

NONLINEAR THEORY OF MULTILAYER SANDWICH SHELLS AND ITS APPLICATION (Ⅱ)──FUNDAMENTAL EQUATIONS FOR ORTHOTROPIC SHALLOW SHELLS

This paper applied the simplified theory for multilayer sandwich shells undergoing moderate/small rotations in Ref. [1] to shallow shells. The equilibrium equations and boundary conditions of large deflection of orthotropic and the special case, isotropic shells, are presented.     

The vibration and buckling of laminated non-homogeneous orthotropic conical shells subjected to external pressure

In this paper, the free vibration and buckling of laminated homogeneous and non-homogeneous orthotropic truncated conical shells under lateral and hydrostatic pressures are studied. At first, the basic relations, the modified Donnell type dynamic stability and compatibility equations have been obtained for laminated orthotropic truncated conical shells, the Young's moduli and density of which vary piecewise continuously in the thickness direction. Applying superposition and Galerkin methods to the foregoing equations, the buckling pressures and dimensionless frequency parameter of laminated homogeneous and non-homogeneous orthotropic conical shells are obtained. The appropriate formulas for single-layer and laminated cylindrical shells made of homogeneous and non-homogeneous, orthotropic and isotropic materials are found as a special case. Finally, the effects of the number and ordering of layers, the variations of conical shell characteristics, together and separately variations of the Young's moduli and densities of the materials of layers on the critical lateral and hydrostatic pressures, and frequency parameter are found for different mode numbers. The results are compared with other works.     

在均布外压作用下复合材料三角形网格加筋圆锥壳体总体稳定性分析

本文在文献[1]的基础上加以推广,分析了在均布外压作用下复合材料三角形网格加筋圆锥壳体总体稳定性,考虑了蒙皮的正交拉弯耦合效应和加筋筋条的偏心效应.基于外压实验观察结果,通过选择恰当的位移分量表达式,本文利用Galerkin法获得了临界外压的近似表达式,并对某一C/E复合材料三角形内网格加筋圆锥壳体的临界外压值进行了理论计算,所得结果与实验值相当吻合.文中所得结果可供工程应用参考.     

On the refined first-order shear deformation plate theory of Kármán type

A new refined first-order shear-deformation plate theory of the Kármán type is presented for engineering applications and a new version of the generalized Kármán large deflection equations with deflection and stress functions as two unknown variables is formulated for nonlinear analysis of shear-deformable plates of composite material and construction, based on the Mindlin/Reissner theory. In this refined plate theory two rotations that are constrained out in the formulation are imposed upon overall displacements of the plates in an implicit role. Linear and nonlinear investigations may be made by the engineering theory to a class of shear-deformation plates such as moderately thick composite plates, orthotropic sandwich plates, densely stiffened plates, and laminated shear-deformable plates. Reduced forms of the generalized Kármán equations are derived consequently, which are found identical to those existe in the literature. Foundation item: the National Natural Science Foundation of China (59675027) Biography: Zhang Jianwu (1954-)     

复合材料层合壳有限元分析的预测-修正法

对于复合材料层合壳的有限元分析，本文根据Reissner-Mindlin型的全局位移场给出了一个预测一修正法。首先按照一般的有限元分析过程(没有引入剪切修正系数)计算出全局响应(如挠度，频率和屈曲载荷等)的预测值；然后利用Lagrange插值构造横向剪应力的一般形式，使得满足层间连续和表面上为零的条件，通过最小二乘法拟合三维应力平衡方程获得横向剪应力；最后在单元上计算和引入剪切修正系数，再经过有限元分析计算出全局响应的修正值。