Guided ion beam and theoretical study of the reactions of Os+ with H2, D2, and HD

Reactions of the third-row transition metal cation Os(+) with H(2), D(2), and HD to form OsH(+) (OsD(+)) were studied using a guided ion beam tandem mass spectrometer. A flow tube ion source produces Os(+) in its (6)D (6s(1)5d(6)) electronic ground state level. Corresponding state-specific reaction cross sections are obtained. The kinetic energy dependences of the cross sections for the endothermic formation of OsH(+) and OsD(+) are analyzed to give a 0 K bond dissociation energy of D(0)(Os(+)-H) = 2.45 ± 0.10 eV. Quantum chemical calculations are performed here at several levels of theory, with B3LYP approaches generally overestimating the experimental bond energy whereas results obtained using BHLYP and CCSD(T), coupled-cluster with single, double, and perturbative triple excitations, levels show good agreement. Theory also provides the electronic structures of these species and the potential energy surfaces for reaction. Results from the reactions with HD provide insight into the reaction mechanism and indicate that Os(+) reacts via a direct reaction. We also compare this third-row transition metal system with the first-row and second-row congeners, Fe(+) and Ru(+), and find that Os(+) reacts more efficiently with dihydrogen, forming a stronger M(+)-H bond. These differences can be attributed to the lanthanide contraction and relativistic effects.     

Guided ion beam and theoretical study of the reactions of Hf+ with H2, D2, and HD

The kinetic energy dependences of reactions of the third-row transition metal cation Hf(+) with H(2), D(2), and HD were determined using a guided ion beam tandem mass spectrometer. A flow tube ion source produces Hf(+) in its (2)D (6s(2)5d(1)) electronic ground state level. Corresponding state-specific reaction cross sections are obtained. The kinetic energy dependences of the cross sections for the endothermic formation of HfH(+) and HfD(+) are analyzed to give a 0 K bond dissociation energy of D(0)(Hf(+)-H)=2.11±0.08 eV. Quantum chemical calculations at several levels of theory performed here generally overestimate the experimental bond energy but results obtained using the Becke-half-and-half-LYP functional show good agreement. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. Results from the reactions with HD provide insight into the reaction mechanisms and indicates that Hf(+) reacts via a statistical mechanism. We also compare this third-row transition metal system with the first-row and second-row congeners, Ti(+) and Zr(+), and find that Hf(+) has a weaker M(+)-H bond. As most third-row transition metal hydride cation bonds exceed their lighter congeners, this trend is unusual but can be understood using promotion energy arguments.     

Guided ion beam and theoretical study of the reactions of Ir+ with H2, D2, and HD

We present the kinetic energy dependence of reactions of the late third-row transition metal cation Ir(+) with H(2), D(2), and HD measured using a guided ion beam tandem mass spectrometer. A flow tube ion source produces Ir(+) ions in its electronic ground state term and primarily in the ground spin-orbit level. Corresponding state-specific reaction cross sections are obtained. The kinetic energy dependence of the cross sections for forming IrH(+) and IrD(+) are analyzed to give a 0 K bond dissociation energy of D(0)(Ir(+)-H) = 3.12 +/- 0.06 eV. Ab initio calculations at the B3LYP/HW+/6-311+G(3p), BHLYP/HW+/6-311+G(3p), and QCISD(T)/HW+/6-311+G(3p) levels performed here show reasonable agreement with the experimental bond energies and with the previous theoretical values available. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. We also compare this third-row transition metal system with those of the first-row and second-row congeners Co(+) and Rh(+). We find that Ir(+) has a stronger M(+)-H bond, which can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals. Results from reactions with HD provide insight into the reaction mechanisms and indicate that Ir(+) reacts largely via an insertion mechanism, in contrast with the lighter group 9 metal ions Co(+) and Rh(+) which react via direct mechanisms.     

Guided ion beam and theoretical study of the reactions of Au+ with H2, D2, and HD

Reactions of the late third-row transition metal cation Au(+) with H(2), D(2), and HD are examined using guided ion beam tandem mass spectrometry. A flow tube ion source produces Au(+) in its (1)S (5d(10)) electronic ground state level. Corresponding state-specific reaction cross sections for forming AuH(+) and AuD(+) as a function of kinetic energy are obtained and analyzed to give a 0 K bond dissociation energy of D(0)(Au(+)-H) = 2.13 ± 0.11 eV. Quantum chemical calculations at the B3LYP∕HW+∕6-311+G(3p) and B3LYP∕Def2TZVPP levels performed here show good agreement with the experimental bond energy. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. We also compare this third-row transition metal system with previous results for analogous reactions of the first-row and second-row congeners, Cu(+) and Ag(+). We find that Au(+) has a stronger M(+)-H bond, which can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals. Results from reactions with HD provide insight into the reaction mechanism and indicate that ground state Au(+) reacts largely via a direct mechanism, in concordance with the behavior of the lighter group 11 metal ions, but includes more statistical behavior than these metals as well.     

Activation of CH4 by gas-phase Mo+, and the thermochemistry of Mo-ligand complexes

The kinetic-energy dependence of the reactions of Mo(+) ((6)S) with methane has been studied using guided ion beam mass spectrometry. No exothermic reactions are observed in this system, as also found previously, but efficient dehydrogenation occurs at slightly elevated energies. At higher energies, MoH(+) dominates the product spectrum and MoC(+), MoCH(+), and MoCH(3)(+) are also observed. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies (in eV) of D(0)(Mo(+)-C) = 4.55 +/- 0.19, D(0)(Mo(+)-CH) = 5.32 +/- 0.14, D(0)(Mo(+)-CH(2)) = 3.57 +/- 0.10, and D(0)(Mo(+)-CH(3)) = 1.57 +/- 0.09. The results for Mo(+) are compared with those for the first- and third-row transition-metal congeners, Cr(+) and W(+), and the differences in behavior and mechanism are discussed. Theoretical results are used to elucidate the geometric and electronic structures of all product ions as well as the complete potential-energy surface for reaction. The efficiency of the coupling between the sextet and quartet spin surfaces is also quantified.     

Activation of methane by gold cations: guided ion beam and theoretical studies

The potential energy surface for activation of methane by the third-row transition metal cation, Au+, is studied experimentally by examining the kinetic energy dependence of this reaction using guided ion beam tandem mass spectrometry. A flow tube ion source produces Au+ primarily in its 1S0 (5d10) electronic ground state level but with some 3D (and perhaps higher lying) excited states that can be completely removed by a suitable quenching gas (N2O). Au+ (1S0) reacts with methane by endothermic dehydrogenation to form AuCH2+ as well as C-H bond cleavage to yield AuH+ and AuCH3+. The kinetic energy dependences of the cross sections for these endothermic reactions are analyzed to give 0 K bond dissociation energies (in eV) of D0(Au+ - CH2) = 3.70 +/- 0.07 and D0(Au+ -CH3) = 2.17 +/- 0.24. Ab initio calculations at the B3LYPHW + /6-311++G(3df,3p) level performed here show good agreement with the experimental bond energies and previous theoretical values available. Theory also provides the electronic structures of the product species as well as intermediates and transition states along the reactive potential energy surface. Surprisingly, the dehydrogenation reaction does not appear to involve an oxidative addition mechanism. We also compare this third-row transition metal system with the first-row and second-row congeners, Cu+ and Ag+. Differences in thermochemistry can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals.     

Unimolecular reactions of dihydrated alkaline earth metal dications M2+(H2O)2, M = Be, Mg, Ca, Sr, and Ba: salt-bridge mechanism in the proton-transfer reaction M2+(H2O)2 --> MOH+ + H3O

The unimolecular reactivity of M(2+)(H(2)O)(2), M = Be, Mg, Ca, Sr, and Ba, is investigated by density functional theory. Dissociation of the complex occurs either by proton transfer to form singly charged metal hydroxide, MOH(+), and protonated water, H(3)O(+), or by loss of water to form M(2+)(H(2)O) and H(2)O. Charge transfer from water to the metal forming H(2)O(+) and M(+)(H(2)O) is not favorable for any of the metal complexes. The relative energetics of these processes are dominated by the metal dication size. Formation of MOH(+) proceeds first by one water ligand moving to the second solvation shell followed by proton transfer to this second-shell water molecule and subsequent Coulomb explosion. These hydroxide formation reactions are exothermic with activation energies that are comparable to the water binding energy for the larger metals. This results in a competition between proton transfer and loss of a water molecule. The arrangement with one water ligand in the second solvation shell is a local minimum on the potential energy surface for all metals except Be. The two transition states separating this intermediate from the reactant and the products are identified. The second transition state determines the height of the activation barrier and corresponds to a M(2+)-OH(-)-H(3)O(+) "salt-bridge" structure. The computed B3LYP energy of this structure can be quantitatively reproduced by a simple ionic model in which Lewis charges are localized on individual atoms. This salt-bridge arrangement lowers the activation energy of the proton-transfer reaction by providing a loophole on the potential energy surface for the escape of H(3)O(+). Similar salt-bridge mechanisms may be involved in a number of proton-transfer reactions in small solvated metal ion complexes, as well as in other ionic reactions.     

Catalytic oxidation of H2 by N2O in the gas phase: O-atom transport with atomic metal cations

Twenty-five atomic cations, M (+), that lie within the thermodynamic window for O-atom transport catalysis of the oxidation of hydrogen by nitrous oxide, have been checked for catalytic activity at room temperature with kinetic measurements using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Only 4 of these 25 atomic cations were seen to be catalytic: Fe (+), Os (+), Ir (+), and Pt (+). Two of these, Ir (+) and Pt (+), are efficient catalysts, while Fe (+) and Os (+) are not. Eighteen atomic cations (Cr (+), Mn (+), Co (+), Ni (+), Cu (+), Ge (+), Se (+), Mo (+), Ru (+), Rh (+), Sn (+), Te (+), Re (+), Pb (+), Bi (+), Eu (+), Tm (+), and Yb (+)) react too slowly at room temperature either in their oxidation with N 2O to form MO (+) or in the reduction of MO (+) by H 2. Many of these reactions are known to be spin forbidden and a few actually may lie outside the thermodynamic window. Three alkaline-earth metal monoxide cations, CaO (+), SrO (+), and BaO (+), were observed to favor MOH (+) formation in their reactions with H 2. A potential-energy landscape is computed for the oxidation of H 2 with N 2O catalyzed by Fe (+)( (6)D) that vividly illustrates the operation of an ionic catalyst and qualitatively accounts for the relative inefficiency of this catalyst.     

Guided-ion beam and theoretical study of the potential energy surface for activation of methane by W+

A guided-ion beam tandem mass spectrometer is used to study the reactions, W(+) + CH(4) (CD(4)) and [W,C,2H](+) + H(2) (D(2)), to probe the [W,C,4H](+) potential energy surface. The reaction W(+) + CH(4) produces [W,C,2H](+) in the only low-energy process. The analogous reaction in the CD(4) system exhibits a cross section with strong differences at the lowest energies caused by zero-point energy differences, demonstrating that this reaction is slightly exothermic for CH(4) and slightly endothermic for CD(4). The [W,C,2H](+) product ion reacts further at thermal energies with CH(4) to produce W(CH(2))(x)(+) (x = 2-4). At higher energies, the W(+) + CH(4) reaction forms WH(+) as the dominant ionic product with smaller amounts of WCH(3)(+), WCH(+), and WC(+) also formed. The energy dependent cross sections for endothermic formation of the various products are analyzed and allow the determination of D(0)(W(+)-CH(3)) approximately 2.31 +/- 0.10 eV, D(0)(W(+)-CH(2)) = 4.74 +/- 0.03 eV, D(0)(W(+)-CH) = 6.01 +/- 0.28 eV, and D(0)(W(+)-C) = 4.96 +/- 0.22 eV. We also examine the reverse reaction, [W,C,2H](+) + H(2) (D(2)) --> W(+) + CH(4) (CH(2)D(2)). Combining the cross sections for the forward and reverse processes yields an equilibrium constant from which D(0)(W(+)-CH(2)) = 4.72 +/- 0.04 eV is derived. Theoretical calculations performed at the B3LYP/HW+/6-311++G(3df,3p) level yield thermochemistry in reasonable agreement with experiment. These calculations help identify the structures and electronic states of the species involved and characterize the potential energy surface for the [W,C,4H](+) system.     

Reactions of Group 8, 9, and 10 monocations (Fe+, Co+, Ni+, Ru+, Rh+, Pd+, Os+, Ir+, Pt+) with phosphane in the gas phase

The reactions of Group 8, 9 and 10 monocations with phosphane were studied under single-collision conditions in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. Fe(+) is completely unreactive, Co(+) reacts slowly and shows both adduct formation and P-H bond activation, and Ni(+) reacts slowly as well but shows adduct formation only. In contrast to their first-row congeners, the investigated second- and third-row transition metal monocations show facile P-H bond activations. Remarkably, extensive dehydrogenations of the collision complexes yield cations MPH(+), MP(2) (+), MP(3)H(+), MP(4) (+) and so on. Exceptional behaviour is shown by the two d(9) cations palladium (whose "dehydrogenation power" is rather limited) and platinum (which gives rise to a great manifold of only partially dehydrogenated species as well). Collision-induced dissociation experiments suggest that P(2) and PH units are formed as ligands.     

Anharmonicity of weakly bound M(+)-H2 complexes

The anharmonicity of weakly bound complexes is studied using the vibrational self-consistent field (VSCF) approach for a series of metal cation dihydrogen (M(+)-H(2)) complexes. The H-H stretching frequency shifts of M(+)-H(2) (M(+) = Li(+), Na(+), B(+), and Al(+)) complexes are calculated with the coupled-cluster method including all single and double excitations with perturbative triples (CCSD(T)) level of theory with the cc-pVTZ basis set. The calculated H-H stretching frequency of Li(+)-H(2), B(+)-H(2), Na(+)-H(2), and Al(+)-H(2) is red-shifted by 121, 202, 74, and 62 cm(-1), respectively, relative to that of unbound H(2). The calculated red shifts and their trends are in good agreement with the available experimental and previously calculated data. Insight into the observed trends is provided by symmetry adapted perturbation theory (SAPT).     

Microhydration effects on the electronic spectra of protonated polycyclic aromatic hydrocarbons: [naphthalene-(H2O)(n = 1,2)]H+

Vibrational and electronic spectra of protonated naphthalene (NaphH(+)) microsolvated by one and two water molecules were obtained by photofragmentation spectroscopy. The IR spectrum of the monohydrated species is consistent with a structure with the proton located on the aromatic molecule, NaphH(+)-H(2)O. Similar to isolated NaphH(+), the first electronic transition of NaphH(+)-H(2)O (S(1)) occurs in the visible range near 500 nm. The doubly hydrated species lacks any absorption in the visible range (420-600 nm) but absorbs in the UV range, similar to neutral Naph. This observation is consistent with a structure, in which the proton is located on the water moiety, Naph-(H(2)O)(2)H(+). Ab initio calculations for [Naph-(H(2)O)(n)]H(+) confirm that the excess proton transfers from Naph to the solvent cluster upon attachment of the second water molecule.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

The bond-forming reactions of atomic dications with neutral molecules: formation of ArNH+ and ArN+ from collisions of Ar2+ with NH3

An experimental and computational study has been performed to investigate the bond-forming reactivity between Ar(2+) and NH(3). Experimentally, we detect two previously unobserved bond-forming reactions between Ar(2+) and NH(3) forming ArN(+) and ArNH(+). This is the first experimental observation of a triatomic product ion (ArNH(+)) following a chemical reaction of a rare gas dication with a neutral. The intensity of ArNH(+) was found to decrease with increasing collision energy, with a corresponding increase in the intensity of ArN(+), indicating that ArN(+) is formed by the dissociation of ArNH(+). Key features on the potential energy surface for the reaction were calculated quantum chemically using CASSCF and MRCI methods. The calculated reaction mechanism, which takes place on a singlet surface, involves the initial formation of an Ar-N bond to give Ar-NH(3)(2+). This complexation is followed by proton loss via a transition state, and then loss of the two remaining hydrogen atoms in two subsequent activationless steps to give the products (3)ArN(+) + H(+) + 2H. This calculated pathway supports the sequential formation of ArN(+) from ArNH(+), as suggested by the experimental data. The calculations also indicate that no bond-forming pathway exists on the ground triplet surface for this system.     

Isomeric effects in the gas-phase reactions of dichloroethene, C2H2CL2, with a series of cations

A study of the reactions of a series of gas-phase cations (NH(4)(+), H(3)O(+), SF(3)(+), CF(3)(+), CF(+), SF(5)(+), SF(2)(+), SF(+), CF(2)(+), SF(4)(+), O(2)(+), Xe(+), N(2)O(+), CO(2)(+), Kr(+), CO(+), N(+), N(2)(+), Ar(+), F(+), and Ne(+)) with the three structural isomers of dichloroethene, i.e., 1,1-C(2)H(2)Cl(2), cis-1,2-C(2)H(2)Cl(2), and trans-1,2-C(2)H(2)Cl(2) is reported. The recombination energy (RE) of these ions spans the range of 4.7-21.6 eV. Reaction rate coefficients and product branching ratios have been measured at 298 K in a selected ion flow tube (SIFT). Collisional rate coefficients are calculated by modified average dipole orientation (MADO) theory and compared with experimental data. Thermochemistry and mass balance have been used to predict the most feasible neutral products. Threshold photoelectron-photoion coincidence spectra have also been obtained for the three isomers of C(2)H(2)Cl(2) with photon energies in the range of 10-23 eV. The fragment ion branching ratios have been compared with those of the flow tube study to determine the importance of long-range charge transfer. A strong influence of the isomeric structure of dichloroethene on the products of ion-molecule reactions has been observed for H(3)O(+), CF(3)(+), and CF(+). For 1,1-C(2)H(2)Cl(2) the reaction with H(3)O(+) proceeds at the collisional rate with the only ionic product being 1,1-C(2)H(2)Cl(2)H(+). However, the same reaction yields two more ionic products in the case of cis-1,2- and trans-1,2-C(2)H(2)Cl(2), but only proceeds with 14% and 18% efficiency, respectively. The CF(3)(+) reaction proceeds with 56-80% efficiency, the only ionic product for 1,1-C(2)H(2)Cl(2) being C(2)H(2)Cl(+) formed via Cl(-) abstraction, whereas the only ionic product for both 1,2-isomers is CHCl(2)(+) corresponding to a breaking of the C=C double bond. Less profound isomeric effects, but still resulting in different products for 1,1- and 1,2-C(2)H(2)Cl(2) isomers, have been found in the reactions of SF(+), CO(2)(+), CO(+), N(2)(+), and Ar(+). Although these five ions have REs above the ionization energy (IE) of any of the C(2)H(2)Cl(2) isomers, and hence the threshold for long-range charge transfer, the results suggest that the formation of a collision complex at short range between these ions and C(2)H(2)Cl(2) is responsible for the observed effects.     

Influence of d orbital occupation on the binding of metal ions to adenine

Threshold collision-induced dissociation of M(+)(adenine) with xenon is studied using guided ion beam mass spectrometry. M(+) includes all 10 first-row transition metal ions: Sc(+), Ti(+), V(+), Cr(+), Mn(+), Fe(+), Co(+), Ni(+), Cu(+), and Zn(+). For the systems involving the late metal ions, Cr(+) through Cu(+), the primary product corresponds to endothermic loss of the intact adenine molecule, whereas for Zn(+), this process occurs but to form Zn + adenine(+). For the complexes to the early metal ions, Sc(+), Ti(+), and V(+), intact ligand loss competes with endothermic elimination of purine and of HCN to form MNH(+) and M(+)(C(4)H(4)N(4)), respectively, as the primary ionic products. For Sc(+), loss of ammonia is also a prominent process at low energies. Several minor channels corresponding to formation of M(+)(C(x)H(x)N(x)), x = 1-3, are also observed for these three systems at elevated energies. The energy-dependent collision-induced dissociation cross sections for M(+)(adenine), where M(+) = V(+) through Zn(+), are modeled to yield thresholds that are directly related to 0 and 298 K bond dissociation energies for M(+)-adenine after accounting for the effects of multiple ion-molecule collisions, kinetic and internal energy distributions of the reactants, and dissociation lifetimes. The measured bond energies are compared to those previously studied for simple nitrogen donor ligands, NH(3) and pyrimidine, and to results for alkali metal cations bound to adenine. Trends in these results and theoretical calculations on Cu(+)(adenine) suggest distinct differences in the binding site propensities of adenine to the alkali vs transition metal ions, a consequence of s-dsigma hybridization on the latter.     

Hydration of alkali ions from first principles molecular dynamics revisited

Structural and dynamical properties of the hydration of Li(+), Na(+), and K(+) in liquid water at ambient conditions were studied by first principles molecular dynamics. Our simulations successfully captured the different hydration behavior shown by the three alkali ions as observed in experiments. The present analyses of the dependence of the self-diffusion coefficient and rotational correlation time of water on the ion concentration suggest that Li(+) (K(+)) is certainly categorized as a structure maker (breaker), whereas Na(+) acts as a weak structure breaker. An analysis of the relevant electronic structures, based on maximally localized Wannier functions, revealed that the dipole moment of H(2)O molecules in the first solvation shell of Na(+) and K(+) decreases by about 0.1 D compared to that in the bulk, due to a contraction of the oxygen lone pair orbital pointing toward the metal ion.     

Hydrogen atom transfer reactions of C2-, C4-, and C6-: bond dissociation energies of linear H-C2n- and H-C2n (n = 1, 2, 3)

The reactions of C2-, C4-, and C6- with D2O and ND3 and of C4- with CH3OH, CH4, and C2H6 have been investigated using guided ion beam tandem mass spectrometry. Hydrogen (or deuterium) atom transfer is the major product channel for each of the reactions. The reaction threshold energies for collisional activation are reported. Several of the reactions exhibit threshold energies in excess of the reaction endothermicity. Potential energy calculations using density functional theory show energy barriers for some of the reactions. Dynamic restrictions related to multiple wells along the reaction path may also contribute to elevated threshold energies. The results indicate that the reactions with D2O have the smallest excess threshold energies, which may therefore be used to derive lower limits on the C-H bond dissociation energies of the C2nH- and C2nH (n = 1-3) linear species. The experimental lower limits for the bond dissociation energies of the neutral radicals to linear products are D0(C2-H) >or= 460 +/- 15 kJ/mol, D0(C4-H) >or= 427 +/- 12 kJ/mol, and D0(C6-H) >or= 405 +/- 11 kJ/mol.     

Electron spin resonance study on H6+, H5D+, H4D2+, and H2D4+ in solid parahydrogen

We carried out an electron spin resonance (ESR) study on hydrogen ion radicals produced by radiolysis of solid para-H(2). In addition to quartet ESR lines proposed to be H(2) (+)-core H(6) (+) (D(2d)) ions in solid para-H(2) [T. Kumada et al., Phys. Chem. Chem. Phys. 7, 776 (2005)], we newly observed totally more than 50 resolved lines in gamma-ray irradiated solid para-H(2)-ortho-D(2) (1 mol %) and para-H(2)-HD (1 mol %) mixtures. We assigned these lines to be isotope substituents of H(2) (+)-core H(6) (+) ions such as H(5)D(+), H(4)D(2) (+), and H(2)D(4) (+) throughout the comparison of their ESR parameters with theoretical results. These results provide a conclusive evidence that H(2) (+)-core H(6) (+) ions are generated in irradiated solid hydrogens. Analysis of the EPR spectrum and ab initio calculations predicts D(2d) symmetry of the H(6) (+) ions, whereas a lowering symmetry (D(2d)-->C(2v)) induced by asymmetric nuclear wave function is observed in H(5)D(+) and H(4)D(2) (+). We also observed isotope-substitution reactions such as H(6) (+)+D(2)-->H(4)D(2) (+)+H(2) and H(6) (+)+HD-->H(5)D(+)+H(2), which are analogous to the well-known isotope-condensation reactions of H(3) (+) in dark nebula, H(3) (+)+HD-->HD(2) (+)+H(2) and HD(2) (+)+HD-->D(3) (+)+H(2).     

Selected Ion Flow Tube Study of the Gas-Phase Reactions of CF(+), CF(2)(+), CF(3)(+), and C(2)F(4)(+) with C(2)H(4), C(2)H(3)F, CH(2)CF(2), and C(2)HF(3)

We study how the degree of fluorine substitution for hydrogen atoms in ethene affects its reactivity in the gas phase. The reactions of a series of small fluorocarbon cations (CF(+), CF(2)(+), CF(3)(+), and C(2)F(4)(+)) with ethene (C(2)H(4)), monofluoroethene (C(2)H(3)F), 1,1-difluoroethene (CH(2)CF(2)), and trifluoroethene (C(2)HF(3)) have been studied in a selected ion flow tube. Rate coefficients and product cations with their branching ratios were determined at 298 K. Because the recombination energy of CF(2)(+) exceeds the ionization energy of all four substituted ethenes, the reactions of this ion produce predominantly the products of nondissociative charge transfer. With their lower recombination energies, charge transfer in the reactions of CF(+), CF(3)(+), and C(2)F(4)(+) is always endothermic, so products can only be produced by reactions in which bonds form and break within a complex. The trends observed in the results of the reactions of CF(+) and CF(3)(+) may partially be explained by the changing value of the dipole moment of the three fluoroethenes, where the cation preferentially attacks the more nucleophilic part of the molecule. Reactions of CF(3)(+) and C(2)F(4)(+) are significantly slower than those of CF(+) and CF(2)(+), with adducts being formed with the former cations. The reactions of C(2)F(4)(+) with the four neutral titled molecules are complex, giving a range of products. All can be characterized by a common first step in the mechanism in which a four-carbon chain intermediate is formed. Thereafter, arrow-pushing mechanisms as used by organic chemists can explain a number of the different products. Using the stationary electron convention, an upper limit for Δ(f)H°(298)(C(3)F(2)H(3)(+), with structure CF(2)═CH-CH(2)(+)) of 628 kJ mol(-1) and a lower limit for Δ(f)H°(298)(C(2)F(2)H(+), with structure CF(2)═CH(+)) of 845 kJ mol(-1) are determined.